AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C8135 LINES GP-FUEL INJECTION-PART 2 OF 2 S/N 24Z2475-2576 3512 GEN SET ENGINE


FUEL SYSTEM
LINES GP-FUEL
GOVERNOR GP
FILTER GP-FUEL

GEN SET ENGINE 3512 GEN SET ENGINE 24Z
 3512 GENERATOR SET ENGINE 24Z01317-UP SEBP1548 3512 24Z   (1981)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL INJECTION
7C-1315 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
 

#SEBP15480740
 

7C-8135: LINES GP-FUEL INJECTION

7C8135 LINES GP-FUEL INJECTION-PART 2 OF 2
S/N 24Z2475-2576
c474097 SEBP1548
7C8135 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8604 [1] MANIFOLD AS-FUEL (RH)  
2. 9N-4053 [1] SPRING  
3. 7C-7677 [12] TUBE AS  
4. 7C-7678 [12] TUBE AS  
5. 030-8276 [1] ELBOW-FLARED  
6. 3J-1907 [27] SEAL  
7. 6V-4362 [1] CONNECTOR-O-RING  
8. 9Y-5585 [1] TUBE AS  
9. 7H-7954 [2] BOLT  
  5M-2894 [2] WASHER  
10. 2B-2694 [6] BOLT  
  9M-1974 [6] WASHER  
11. 9M-8406 [2] CLIP  
12. 3H-4656 [1] SPACER  
13. 3V-0409 [1] SPACER  
14. 003-8581 [1] TEE-UNION  
15. 7W-2122 [24] CONNECTOR-PORT  
16. 7N-6806 C [2] SEAL-RECTANGULAR  
17. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL-O-RING  
18. 1W-7535 [1] PLUNGER-REGULATING VALVE  
19. 2M-9780 [1] SEAL-O-RING  
20. 6V-4363 [1] ELBOW  
21. 9S-4191 [1] PLUG-O-RING  
22. 030-7943 C [1] ELBOW  
23. 7E-3678 C [1] TUBE AS  
24. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15480741
 

7C-8135: LINES GP-FUEL INJECTION

7C8135 LINES GP-FUEL INJECTION-PART 1 OF 2
S/N 24Z2577-UP
c578543 SEBP1548
7C8135 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
2. 030-7949 [2] ELBOW  
3. 2M-9780 [6] SEAL-O-RING  
4. 7N-6806 [2] SEAL-RECTANGULAR  
5. 4P-5495 C [1] MANIFOLD AS-FUEL  
6. 2B-2694 [6] BOLT  
7. 9M-1974 [2] WASHER-HARD  
8. 9M-4584 [2] CONNECTOR-FLARED  
9. 1D-4539 [1] BOLT  
10. 4P-0707 C [4] CLAMP AS  
11. 0L-2070 [1] BOLT  
12. 5M-2894 [7] WASHER  
13. 0S-1608 C [1] BOLT  
14. 9S-8752 C [2] NUT-FULL  
15. 6V-0268 [1] CLIP  
16. 8N-8294 C [1] TUBE AS  
17. 1W-7536 C [1] TUBE AS  
18. 030-7977 [1] ELBOW  
19. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
20. 1D-4541 [1] BOLT  
21. 8N-8293 [1] TUBE AS  
22. 4P-0693 C [4] CLAMP AS  
23. 0T-0065 [2] BOLT  
24. 7K-3377 [1] PIPE  
25. 7P-8672 [1] PLATE  
26. 0S-1594 [1] BOLT  
27. 1B-4971 [1] SPACER  
28. 6V-0267 [1] CLIP  
29. 7E-3921 [1] VALVE  
30. 9N-0869 [6] WASHER  
31. 6B-6205 [1] SPACER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15480742
 

7C-8135: LINES GP-FUEL INJECTION

7C8135 LINES GP-FUEL INJECTION-PART 2 OF 2
S/N 24Z2577-UP
c644317 SEBP1548
7C8135 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5494 C [1] MANIFOLD AS-FUEL  
2. 9N-4053 [1] SPRING  
3. 7C-7677 [12] TUBE AS  
4. 7C-7678 [12] TUBE AS  
5. 030-8276 [1] ELBOW-FLARED  
6. 3J-1907 [27] SEAL-O-RING  
7. 6V-4362 [1] CONNECTOR-O-RING  
8. 8N-8729 C [1] TUBE AS  
9. 0L-1352 C [2] BOLT  
  5M-2894 [2] WASHER  
10. 2B-2694 [6] BOLT  
  9N-0869 C [6] WASHER  
11. 4P-0692 C [4] CLAMP AS  
12. 3K-0360 [1] SEAL-O-RING  
13. 7K-3377 C [2] PIPE  
14. 003-8581 [1] TEE-UNION  
15. 7W-2122 [24] CONNECTOR-PORT  
16. 7N-6806 [2] SEAL-RECTANGULAR  
17. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL-O-RING  
18. 114-5477 [1] PLUNGER-REGULATING VALVE  
19. 2M-9780 [1] SEAL-O-RING  
20. 6V-4363 [1] ELBOW  
21. 9S-4191 [1] PLUG-O-RING  
22. 030-7943 [1] ELBOW  
23. 7E-3678 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15480743
 

8N-5069: CONTROLET AS

8N5069 CONTROLET ASSEMBLY
PART OF 7N6168 GOVERNOR
AN ATTACHMENT
c477385 SEBP1548
8N5069 CONTROLET AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5121 [1] PISTON AS  
2. 9F-9597 [1] GEAR-BALL HEAD DRIVE (17 TEETH)  
3. 8N-5120 [1] SPRING  
4. 9F-9596 [1] DRIVE AS  
5. 5H-6500 [1] LEVER AS  
6. 2N-1922 [1] PIN  
  2F-6713 [1] PIN-COTTER  
  4F-2317 [1] WASHER  
7. 7L-8458 [1] SPRING  
8. 5H-6503 [1] LEVER-SHUTDOWN  
9. 8N-5122 [1] CONTROLET AS  
10. 2F-6707 [2] VALVE AS-CHECK  
11. 9F-9630 [4] RING-RETAINING  
12. 2F-6818 [2] PISTON  
13. 2F-6802 [2] SPRING  
14. 3L-6746 [1] SEAT-SPRING  
15. 8N-5124 [1] CONTROLET  
  9F-9635 [1] WASHER  
16. 9F-2247 [4] PLUG  
 

#SEBP15480744
 

7W-9741: FILTER GP-FUEL

7W9741 FILTER GP-FUEL-R.H. SERVICE
c335342 SEBP1548
7W9741 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [10] BOLT  
2. 5M-2894 [12] WASHER  
3. 4J-4382 [1] PLUG-PIPE  
4. 4W-8918 [1] HOUSING AS-FUEL  
5. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
6. 9S-4182 [5] PLUG  
7. 2W-6288 [1] COVER-FILTER HOUSING  
8. 5D-5957 [2] SEAL-O-RING  
9. 2S-5100 [1] VALVE AS-NEEDLE  
10. 6V-5048 [5] SEAL-O-RING  
11. 9S-4185 [1] PLUG-O-RING  
  3K-0360 [1] SEAL-O-RING  
12. 9S-4191 [1] PLUG-O-RING  
  6V-5049 [1] SEAL-O-RING  
13. 8N-9850 [5] ELEMENT AS-FUEL FILTER  
14. 2W-9301 [1] RETAINER-FILTER  
15. 7F-0192 [2] BOLT  
16. 2W-9300 [1] COVER-FILTER HOUSING  
17. 1N-2895 [1] SPRING  
18. 7B-2742 [1] BOLT  
  5P-0537 [1] WASHER  
19. 1B-2790 [1] BOLT  
  9M-1974 [1] WASHER  
20. 6N-4414 [1] COVER-FILTER BASE  
  1P-0436 [1] GASKET  
 

#SEBP15480745
 

7W-9741: FILTER GP-FUEL

7W9741 FILTER GP-FUEL-R.H. SERVICE
S/N 24Z1317-1476,67Z535-547
c335342 SEBP1548
7W9741 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [10] BOLT  
2. 5M-2894 [12] WASHER  
3. 4J-4382 [1] PLUG-PIPE  
4. 4W-8918 [1] HOUSING AS-FUEL  
5. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
6. 9S-4182 [5] PLUG  
7. 2W-6288 [1] COVER-FILTER HOUSING  
8. 5D-5957 [2] SEAL-O-RING  
9. 2S-5100 [1] VALVE AS-NEEDLE  
10. 6V-5048 [5] SEAL-O-RING  
11. 9S-4185 [1] PLUG-O-RING  
  3K-0360 [1] SEAL-O-RING  
12. 9S-4191 [1] PLUG-O-RING  
  6V-5049 [1] SEAL-O-RING  
13. 8N-9850 [5] ELEMENT AS-FUEL FILTER  
14. 2W-9301 [1] RETAINER-FILTER  
15. 7F-0192 [2] BOLT  
16. 2W-9300 [1] COVER-FILTER HOUSING  
17. 1N-2895 [1] SPRING  
18. 7B-2742 [1] BOLT  
  5P-0537 [1] WASHER  
19. 1B-2790 [1] BOLT  
  9M-1974 [1] WASHER  
20. 6N-4414 [1] COVER-FILTER BASE  
  1P-0436 [1] GASKET  
 

#SEBP15480746
 

7W-9741: FILTER GP-FUEL

7W9741 FILTER GP-FUEL
RH SERVICE
S/N 24Z1477-UP,67Z548-UP
c644193 SEBP1548
7W9741 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [2] BOLT  
2. 5M-2894 [4] WASHER  
3. 8T-6766 [1] PLUG-PIPE  
4. 124-3179 C [1] HOUSING AS-FUEL  
5. 9S-4190 [1] PLUG-O-RING  
  2M-9780 [1] SEAL-O-RING  
6. 9S-4182 [5] PLUG  
7. 2W-6288 [1] COVER-FILTER HOUSING  
8. 5D-5957 [2] SEAL-O-RING  
9. 2S-5100 [1] VALVE AS-NEEDLE  
10. 6V-5048 [5] SEAL-O-RING  
11. 9S-4185 [1] PLUG-O-RING  
  3K-0360 [1] SEAL-O-RING  
12. 1N-2895 [1] SPRING  
13. 1R-0718 [5] ELEMENT AS-FUEL FILTER  
14. 6I-3754 [1] RETAINER-FILTER  
15. 7F-0192 [2] BOLT  
16. 2W-9300 [1] COVER-FILTER HOUSING  
17. 6N-4414 [1] COVER-FILTER BASE  
  9Y-8389 [1] GASKET  
18. 6V-5049 [1] SEAL-O-RING  
  9S-4191 [1] PLUG-O-RING  
19. 7B-2742 [1] BOLT  
  5P-0537 [1] WASHER  
20. 1B-2790 [1] BOLT  
  9M-1974 [1] WASHER-HARD  
21. 3B-1915 [8] BOLT  
22. 8M-9024 [8] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15480747
 

7C-1308: FILTER GP-FUEL

7C1308 FILTER GP-FUEL
c644357 SEBP1548
7C1308 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0573 [2] BOLT  
2. 7C-1310 [1] SUPPORT  
3. 0S-1588 [2] BOLT  
  5M-2894 [2] WASHER  
  1D-4717 [2] NUT  
4. 9Y-8389 [1] GASKET  
5. 1B-2790 [1] BOLT  
  5P-0537 [1] WASHER  
6. 3J-7354 [1] SEAL-O-RING  
7. 9S-4182 [1] PLUG  
8. 6N-4414 [1] COVER-FILTER BASE  
9. 7B-2742 [1] BOLT  
  9M-1974 [1] WASHER-HARD  
10. 1N-3789 [1] BASE AS-FILTER  
  9S-4167 [1] STUD-HOLLOW  
11. 1R-0712 [1] FILTER AS-FUEL  
 

#SEBP15480748
 

2W-6325: FILTER GP-FUEL

2W6325 FUEL FILTER GROUP-DUPLEX-R.H.-PART 1 OF 2
REFER TO 7W1450 CHART-PAGE 325
NOT FOR USE WITH A RADIATOR THAT COULD CAUSE AIR
MOVEMENT IN THE AREA OF THE DUPLEX FUEL FILTER SYSTEM.
AN ATTACHMENT
c335747 SEBP1548
2W6325 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 C [2] BOLT  
2. 5M-2894 [8] WASHER  
3. 4J-4382 [2] PLUG-PIPE  
4. 9S-4182 [7] PLUG  
5. 6V-5048 [9] SEAL-O-RING  
6. 0L-1351 [2] BOLT  
7. 2W-6289 [1] TUBE AS  
8. 2W-6288 [1] COVER-FILTER HOUSING  
9. 2W-6293 [1] TUBE AS  
10. 030-7949 [4] ELBOW  
11. 6V-4589 [6] SEAL-O-RING  
12. 2S-5100 [2] VALVE AS-NEEDLE  
13. 2W-9300 C [2] COVER-FILTER HOUSING  
14. 2W-6291 [1] TUBE AS  
15. 003-8581 [1] TEE-UNION  
   
16. 2W-6667 [1] TUBE AS  
17. 2W-6292 [1] TUBE AS  
18. 8L-6557 [1] CONNECTOR  
19. 2W-6672 [1] VALVE AS-TOGGLE  
20. 1P-3861 [1] CONNECTOR  
21. 2W-6326 [1] PLATE  
  2N-3479 [4] SCREW  
22. 7D-4903 [1] ADAPTER  
23. 030-7946 [1] ELBOW  
24. 2W-6290 [1] TUBE AS  
25. 6M-7476 [1] ELBOW  
26. 9S-4190 [1] PLUG-0-RING  
27. 9S-4191 [1] PLUG-O-RING  
  6V-5049 [1] SEAL-O-RING  
28. 9N-1752 [1] SPRING  
  4B-9782 [1] BALL  
29. 4W-5137 [2] FILM-WARNING  
30. 7F-0192 C [4] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15480749
 

2W-6325: FILTER GP-FUEL

2W6325 FUEL FILTER GROUP-DUPLEX-R.H.-PART 2 OF 2
REFER TO 7W1450 CHART-PAGE 325
NOT FOR USE WITH A RADIATOR THAT COULD CAUSE AIR
MOVEMENT IN THE AREA OF THE DUPLEX FUEL FILTER SYSTEM.
AN ATTACHMENT
c335748 SEBP1548
2W6325 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-2895 [2] SPRING  
2. 2W-9301 C [2] RETAINER-FILTER  
3. 9S-4182 [2] PLUG  
  6V-5048 [2] SEAL-O-RING  
4. 4W-8918 [1] HOUSING AS-FUEL  
   
5. 5D-5957 [4] SEAL-O-RING  
6. 2W-6287 [2] VALVE AS-CHECK  
7. 6V-4589 [2] SEAL-O-RING  
8. 1W-2744 [1] HOUSING AS-FUEL FILTER  
9. 0S-1591 [2] BOLT  
  1D-4717 [2] NUT  
10. 5M-2894 [14] WASHER  
   
11. 8N-9850 [7] ELEMENT AS-FUEL FILTER  
12. 9S-7381 [4] BOLT-SOCKET HEAD  
13. 2W-6286 [1] VALVE AS-CONTROL  
14. 061-8639 [4] SEAL-O-RING  
15. 4W-4444 [1] ADAPTER-VALVE  
16. 0S-1594 [2] BOLT  
17. 0S-1588 [10] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Remanufactured Unit Injectors Are Available
1983/08/17
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow
1984/02/22
Improvements Made To Fuel Filter Housing
1984/10/24
Additional Information For Correct Fuel Injector Timing
1984/12/12
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load
1984/12/12
New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group
1985/05/01
Fuel Filter Service Indicators Now Available
1985/07/01
New O-ring Seals And Additional Clamps Used In Instrument Panel Fuel Filter Differential Lines Group
1985/10/01
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Fuel Injector Reference For 3500 Family Engines
1987/01/01
Fuel Injector Trim Bolt
1987/06/01
Additional Information For Installing Fuel Injectors
1988/06/01
Replacement Fuel Injector Nozzles With New Nose Cones Available
1988/08/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Fuel Manifolds Changed To Steel
1989/05/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Clamps With Grommets Used In Fuel Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
Fuel Return Line Added To Fuel System In Power Modules
1990/05/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
Improvements To Auxiliary Fuel Filter Housing Assembly
1990/06/01
New, Longer Bolt Gives Better Retention To Fuel Injection Lines
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Additional Clip And Hardware Prevent Damage To Fuel Line Of 4W6887 Instrument Panel
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines
1991/05/01
New Return Spring Used In Unit Injectors
1991/08/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New Fuel Filter Housing Assembly Has 180 Degree Supports For Increased Strength{1262}
1996/11/01
SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines {1274, 1307}
2003/06/01
A New Fuel Shield is Available {1252}
2005/03/28
Improved Fuel Cooler {1712}
2005/07/04
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
A Two Piece Clip and Grommet for the Fuel Lines Are Now Used On Certain Commercial Engines {1250, 1250, 7553}
2013/08/30
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Magazine
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/06
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remanufactured Unit Injectors Are Available{1290}
1983/07/11
New Seal And Washer Will Prevent The Flow Of Dirty Fuel Past The Filter{1261}
1983/10/24
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow{1252}
1984/02/13
Improvements Made To Fuel Filter Housing{1260,1261,1262}
1984/10/22
Additional Information For Correct Fuel Injector Timing{1290}
1984/11/19
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load{1251,1250}
1984/11/26
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Two 11 mm Injectors Available For Parts Service{1250,1290}
1988/06/20
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01
Check Valve Added To Fuel Injection Lines {1274}
1989/05/22
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Fuel Return Line Added To Fuel System In Power Modules {1274}
1990/05/07
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New, Longer Bolt Gives Better Retention To Fuel Injection Lines {1252}
1990/05/28
Improvements To Auxiliary Fuel Filter Housing Assembly {1262}
1990/06/11
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Additional Clip And Hardware Prevent Damage To Fuel Line Of 4W6887 Instrument Panel{1261}
1990/10/15
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
Engine Updates Help Prevent Piston Seizures{1214,1252,1265,1274,1355,1383,1393,1456}
1991/05/13
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines{1252,1702}
1991/05/27
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3512 :

LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-1315 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-1315 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-1315 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-1315 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-6576 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-6576 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-6576 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8135 LINES GP-FUEL INJECTION
CONTROLET AS
8N-5069 CONTROLET AS
FILTER GP-FUEL
7W-9741 FILTER GP-FUEL
FILTER GP-FUEL
7W-9741 FILTER GP-FUEL
FILTER GP-FUEL
7W-9741 FILTER GP-FUEL
FILTER GP-FUEL
7C-1308 FILTER GP-FUEL
FILTER GP-FUEL
2W-6325 FILTER GP-FUEL

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.