AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5N8166 CONTROL GP-AIR STARTING-24-32 VOLT TYPE 3. 6I2000-PAGE 435.01 , 5N8980-PAGE 405.01 FOR USE WITH HYDRO-MECHANICAL SYSTEM & AIR START OR ELECTRIC ASSISTED AIR START. NOT FOR USE WITH MANUAL AIR START CONTROL GROUP OR MANUAL CONTROL GROUP WITH OVERRIDE. AN ATTACHMENT 3512


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SOLENOID GP
STARTING MOTOR GP

GEN SET ENGINE 3512 GEN SET ENGINE 24Z
 3512 GENERATOR SET ENGINE 24Z01317-UP SEBP1548 3512 24Z   (1981)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8490 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8490 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8491 CONTROL GP-AIR STARTING
 

#SEBP15480910
 

5N-8166: CONTROL GP-AIR STARTING

5N8166 CONTROL GP-AIR STARTING-24-32 VOLT
TYPE 3. 6I2000-PAGE 435.01 , 5N8980-PAGE 405.01
FOR USE WITH HYDRO-MECHANICAL SYSTEM & AIR START OR ELECTRIC ASSISTED AIR
START. NOT FOR USE WITH MANUAL AIR START CONTROL GROUP OR MANUAL CONTROL
GROUP WITH OVERRIDE. AN ATTACHMENT
c548422 SEBP1548
5N8166 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-1972 C [2] ELBOW-FLARED  
2. 5N-8980 Y [1] VALVE AS  
3. 6I-2000 Y [1] SWITCH AS-TWO UNIT  
4. 0S-1591 [2] BOLT  
  9S-8752 [2] NUT-FULL  
  5M-2894 [2] WASHER 2.5MM(.098IN.)THK.  
  5P-1075 [2] WASHER-HARD 3MM(.12IN.)THK.  
5. 6I-3338 [1] PLATE-CONTROL MOUNTING  
6. 7D-5473 [2] BOLT-SOCKET HEAD  
  4B-2043 [2] NUT  
  3B-4501 [4] LOCKWASHER  
7. 5H-7598 [1] NIPPLE-PIPE  
8. 2V-5956 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15480911
 

8N-8490: CONTROL GP-AIR STARTING

8N8490 AIR STARTING CONTROL GROUP-115 VOLT-TYPE 1
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START. NOT FOR USE
WITH MANUAL AIR START CONTROL, MANUAL CONTROL WITH OVERRIDE OR HYDRO-
MECHANICAL SYSTEM
AN ATTACHMENT
c335696 SEBP1548
8N8490 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-7303 [1] ELBOW (45 DEGREES)  
    -OR-
  6K-1972 C [1] ELBOW-FLARED (90 DEGREES)  
2. 5N-2746 [1] VALVE-SOLENOID  
3. 6N-9587 [2] CONNECTOR  
4. 5P-5610 [2] CONNECTOR  
5. 3B-7275 [1] NIPPLE-PIPE  
6. 3N-4579 [1] HOSE AS  
7. 3F-2065 [1] LOCKNUT-CONDUIT  
8. 4F-8184 [1] BUSHING  
9. 3N-2419 [1] SWITCH  
10. 0S-1591 [2] BOLT  
  1D-4717 [2] NUT  
  5M-2894 [2] WASHER  
    2.5MM
  5P-1075 [2] WASHER-HARD  
    3MM
11. 8N-2262 [1] PLATE-CONTROL MOUNTING  
12. 4B-1233 [2] SCREW  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
13. 5L-2579 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15480912
 

8N-8490: CONTROL GP-AIR STARTING

8N8490 CONTROL GP-AIR STARTING-115 VOLT-TYPE 2
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START. NOT FOR USE
WITH MANUAL AIR START CONTROL, MANUAL CONTROL WITH OVERRIDE OR
HYDRO-MECHANICAL SYSTEM
AN ATTACHMENT
c548665 SEBP1548
8N8490 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-1972 C [2] ELBOW-FLARED (90 DEGREES)  
2. 5N-2746 [1] VALVE-SOLENOID  
3. 6N-9587 [2] CONNECTOR  
4. 5P-5610 [2] CONNECTOR  
5. 5H-7598 [1] NIPPLE-PIPE  
6. 2V-5956 I [1] HOSE AS  
7. 3F-2065 [1] LOCKNUT-CONDUIT  
8. 4F-8184 [1] BUSHING  
9. 6I-1997 [1] SWITCH  
10. 0S-1591 [2] BOLT  
  9S-8752 [2] NUT-FULL  
  5M-2894 [2] WASHER  
    2.5MM
  5P-1075 [2] WASHER-HARD  
    3MM
11. 6I-1966 [1] PLATE-CONTROL MOUNTING  
12. 7D-5473 [4] BOLT-SOCKET HEAD  
  4B-2043 [4] NUT  
  3B-4501 [4] LOCKWASHER  
13. 5L-2579 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP15480913
 

8N-8491: CONTROL GP-AIR STARTING

8N8491 AIR STARTING CONTROL GROUP-24-32 VOLT DC
TYPE 1. 5N8980-PAGE 405.01, 5N8957-PAGE 434.03
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START. NOT FOR USE
WITH MANUAL AIR START CONTROL OR MANUAL CONTROL WITH OVERRIDE & HYDRO-
MECHANICAL SYSTEM. AN ATTACHMENT
c344587 SEBP1548
8N8491 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 CY [1] VALVE AS  
2. 8N-2262 [1] PLATE-CONTROL MOUNTING  
3. 4B-1233 [2] SCREW  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
4. 6K-1972 C [1] ELBOW-FLARED  
5. 3B-7275 [1] NIPPLE-PIPE  
6. 3N-4579 [1] HOSE AS  
7. 5N-8957 CY [1] SWITCH AS  
8. 0S-1591 C [2] BOLT  
9. 1D-4717 [2] NUT  
10. 5M-2894 [2] WASHER  
11. 5P-1075 C [2] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15480914
 

8N-8491: CONTROL GP-AIR STARTING

8N8491 CONTROL GP-AIR STARTING-24-32 VOLT DC
TYPE 2. 5N8980-PAGE 405.01, 6I1998-PAGE 434.03
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START. NOT FOR USE
WITH MANUAL AIR START CONTROL OR MANUAL CONTROL WITH OVERRIDE & HYDRO-
MECHANICAL SYSTEM. AN ATTACHMENT
c541417 SEBP1548
8N8491 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS  
2. 6I-1966 C [1] PLATE-CONTROL MOUNTING  
3. 7D-5473 C [4] BOLT-SOCKET HEAD  
  4B-2043 C [4] NUT  
  3B-4501 C [4] LOCKWASHER  
4. 6K-1972 [1] ELBOW-FLARED  
5. 5H-7598 C [1] NIPPLE-PIPE  
6. 6N-3170 IC [1] HOSE AS  
7. 6I-1998 YC [1] SWITCH AS  
8. 0S-1591 [2] BOLT  
9. 9S-8752 C [2] NUT-FULL  
10. 5M-2894 [2] WASHER  
11. 5P-1075 [2] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15480915
 

5N-8165: CONTROL GP-AIR STARTING

5N8165 AIR STARTING CONTROL GP-115 VOLT AC.
4W1706-PAGE 410.02
FOR USE WITH HYDRA-MECHANICAL SYSTEM & AIR START OR ELECTRIC ASSISTED
AIR START. NOT FOR USE WITH MANUAL AIR START CONTROL GP OR MANUAL
CONTROL GP WITH OVERRIDE. AN ATTACHMENT
c336314 SEBP1548
5N8165 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9587 [4] CONNECTOR  
2. 5P-5610 [4] CONNECTOR  
3. 5N-2746 [1] VALVE-SOLENOID (SOLENOID)  
4. 6K-1972 C [1] ELBOW-FLARED  
5. 3B-7275 [1] NIPPLE-PIPE  
6. 6N-3170 C [1] HOSE AS  
7. 5N-6762 [1] SWITCH  
8. 0S-1591 [2] BOLT  
9. 9S-8752 C [2] NUT-FULL  
10. 5M-2894 [2] WASHER  
11. 5P-1075 [2] WASHER-HARD  
12. 5N-8056 [1] PLATE  
13. 4B-1233 [2] SCREW  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
14. 1S-4435 [1] CONNECTOR  
15. 4W-1706 CY [1] VALVE GP-DIVERTER (DIVERTER)  
16. 5L-2579 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15480916
 

5N-8980: VALVE AS-SOLENOID

5N8980 VALVE AS-SOLINOID
PART OF 7C0300 CONTROL-AIR STARTING & 7C5104, 5N8166 & 8N8491
STARTING MOTOR-AIR
AN ATTACHMENT
c553982 SEBP1548
5N8980 VALVE AS-SOLENOID Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-8765 [1] VALVE-SOLENOID  
2. 7N-9738 [1] HOUSING-RECEPTACLE  
3. 7N-7779 [1] SOCKET  
4. 7N-7780 [1] PIN-CONNECTOR  
 

#SEBP15480917
 

7C-0330: CONTROL GP-AIR STARTING

7C0330 CONTROL GP-AIR STARTING
32 VOLT DC. TYPE 1
5N8980-PAGE 405.01
FOR USE WITH RH INSTRUMENT PANEL
AN ATTACHMENT
c345248 SEBP1548
7C0330 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS  
2. 5J-7303 [1] ELBOW  
3. 3B-7275 [1] NIPPLE-PIPE  
4. 3N-4579 [1] HOSE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15480918
 

7C-0330: CONTROL GP-AIR STARTING

7C0330 CONTROL GP-AIR STARTING
24-32 VOLT DC. TYPE 2
5N8980-PAGE 405.01
FOR USE WITH RH INSTRUMENT PANEL
AN ATTACHMENT
c499559 SEBP1548
7C0330 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS  
2. 6K-1972 C [1] ELBOW-FLARED  
3. 5H-7598 [1] NIPPLE-PIPE  
4. 3N-4622 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15480919
 

7C-0330: CONTROL GP-AIR STARTING

7C0330 CONTROL GP-AIR STARTING
24-32 VOLT DC. TYPE 3
5N8980-PAGE 405.01
FOR USE WITH RH INSTRUMENT PANEL
AN ATTACHMENT
c528785 SEBP1548
7C0330 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS  
2. 6K-1972 C [2] ELBOW-FLARED  
3. 5H-7598 [1] NIPPLE-PIPE  
4. 2V-5956 CI [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
Improved Valve Used In Air Starting Lines Groups
1984/06/20
New Air Start And Override Valve Has Stronger Mounting
1984/06/20
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1984/12/12
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1985/02/01
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01
Air Starter Relay Valve Improved
1991/07/01
New Starting Motors Used {1453}
2002/05/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
A New Starter Drive is Used on Air Starting Motors {1451}
2006/01/02
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Bowl - Clean
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Oil Level - Check
3500 Industrial and Generator Set Engines
Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Cold Weather Starting
3500 Industrial and Generator Set Engines
Starting the Engine
3500 Industrial and Generator Set Engines
Air Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3500 Generator Set Engines
Air Starting Motor
3500 Generator Set Engines
Air Starting Motor Pressure Regulating Valve
3500 Generator Set Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor
3500 Generator Set Engines
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
3500 Engines
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
Testing and Adjusting
Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Electric Starting System
3500 Engines
Pinion Clearance Adjustment
3500 Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Pressure Regulating Valve
3500 Engines
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Air Starting Motor - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Air Starting Motor - Assemble
3508, 3512 and 3516 Generator Set Engines
Air Regulator - Remove and Install - Air Starting
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
Improved Valve Used In Air Starting Lines Groups{1451}
1984/05/21
New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1984/12/10
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1985/02/11
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

Caterpillar Parts SIS Catalog 3512 :

CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7205 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7202 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7211 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7211 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7208 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7208 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8490 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8490 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8491 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
8N-8491 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8165 CONTROL GP-AIR STARTING
VALVE AS-SOLENOID
5N-8980 VALVE AS-SOLENOID
CONTROL GP-AIR STARTING
7C-0330 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
7C-0330 CONTROL GP-AIR STARTING

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.