AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8F9866 GREASE GUN ASSEMBLY PART OF 9S7977 HAND TOOL AN ATTACHMENT 3508 GEN SET ENGINE


SERVICE EQUIPMENT AND SUPPLIES
TOOLS
CHARTS & FILMS
GASKET & SEAL KITS
CHARTS & FILMS
GASKET & SEAL KITS

GEN SET ENGINE 3508 GEN SET ENGINE 23Z
 3508 GENERATOR SET ENGINE 23Z01023-03488 SEBP1549 3508 23Z   (1981)

SERVICE EQUIPMENT AND SUPPLIES

TOOLS
TOOL GP-HAND
9S-7977 TOOL GP-HAND
GREASE GUN AS
8F-9866 GREASE GUN AS
 

#SEBP15491060
 

8F-9866: GREASE GUN AS

8F9866 GREASE GUN ASSEMBLY
PART OF 9S7977 HAND TOOL
AN ATTACHMENT
c108355 SEBP1549
8F9866 GREASE GUN AS Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2636 [1] NOZZLE AS  
2. 2M-2689 [1] COUPLER AS  
3. 9F-2638 [1] HOSE AS  
4. 9F-2637 [1] NIPPLE  
 

#SEBP15491061
 

5N-9206: PLATE & FILM GP

5N9206 ACCESSORY PLATE AND DECALOMANIA GP
S/N 70Z588-UP
AN ATTACHMENT
SEBP15491061 SEBP1549
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-2807 [4] FILM - SYMBOL  
   
  3N-9344 [4] FILM - SYMBOL  
   
  5N-9207 [2] PLATE - WARNING  
   
  3N-8591 [4] DECAL LIFTING WARNING  
 

#SEBP15491062
 

GASKET KITS

GASKET KITS
SEBP15491062 SEBP1549
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    GASKET KITS
   
  6V-5992 VALVE GRINDING-MULTIPLE-1W4211 & 7N8701  
  8T-7814 VALVE GRINDING-MULTIPLE-2W8406 & 2W8867  
  6V-5944 VALVE GRINDING-SINGLE 1W4211 & 7N8701 AR  
    S/N 70Z588-601,23Z1023-1342
  9X-8297 VALVE GRINDING-SINGLE-1W4211 & 7N8701 AR  
    S/N 70Z602-UP,23Z1343-UP
  8T-7889 VALVE GRINDING-SINGLE-2W8406 & 2W8867 AR  
    S/N 70Z588-601,23Z1023-1342
  9X-8300 VALVE GRINDING-SINGLE-2W8406 & 2W8867 AR  
    S/N 23Z1343-UP,70Z602-UP
  9X-8298 VALVE GRINDING-SINGLE-7C1299 & 7C4594 AR  
    S/N 23Z1343-UP,70Z602-UP
  6V-5946 CENTRAL & LOWER STRUCTURE-1W4211&7N8701  
  8T-7882 CENTRAL & LOWER STRUCTURE-2W8406&2W8867  
  6V-3774 SINGLE CYLINDER LINER (ALL)  
  6V-5503 FRONT STRUCTURE-1W4211 & 7N8701 AR  
  8T-7884 FRONT STRUCTURE-2W8406 & 2W8867 AR  
  6V-3777 REAR STRUCTURE-7N8701 & 1W4211 AR  
  8T-7890 REAR STRUCTURE-2W8406 & 2W8867 AR  
  6V-5995 FUEL INJECTOR-1W4211 & 7N8701 AR  
  6V-5499 MANIFOLD (ALL)  
  9X-8308 MANIFOLD-7N8701, 2W8406 & 2W8867 AR  
    S/N 23Z1343-UP,70Z602-UP
  6V-9897 SINGLE INJECTOR-1W8406 & 2W8867 AR  
  6V-3783 EXPANSION TANK-7N8701 AR  
  6V-6428 WATER PUMP-1W4211, 2W8406 & 2W8867 AR  
  6V-5901 WATER PUMP-7N8701 AR  
  6V-5902 WATER LINES-1W4211 & 7N8701 AR  
  8T-7888 WATER LINES-2W8406 & 2W8867 AR  
  6V-8062 AFTERCOOLER & LINES-2W8406 & 2W8867 AR  
  6V-5953 AFTERCOOLER & LINES-7N8701 AR  
  6V-6427 AFTERCOOLER & LINES-1W4211 AR  
  6V-3769 TURBOCHARGER MOUNTING-7N8701 AR  
  6V-3770 TURBOCHARGER MOUNTING-1W4211 AR  
  8T-4860 TURBOCHARGER MOUNTING-2W8406 & 2W8867 AR  
  8T-7892 FUEL SYSTEM-2W8406 & 2W8867 AR  
  6V-5994 FUEL SYSTEM-1W4211 & 7N8701 AR  
  8T-7891 OIL COOLER & LINES-2W8406 & 2W8867 AR  
  6V-5949 OIL COOLER & LINES-1W4211 & 7N8701 AR  
  8T-7883 OIL PUMP-2W8406 & 2W8867 AR  
  6V-5947 OIL PUMP-1W4211 & 7N8701 AR  
 

#SEBP15491063
 

NAME PLATES AND TRANSFERS

NAME PLATES AND TRANSFERS
SEBP15491063 SEBP1549
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
  4N-9363 [1] PLATE--CATERPILLAR  
   
  3N-3790 [1] PLATE--SERIAL NUMBER  
    ON L.H. SIDE OF CAMSHAFT COMPARTMENT
   
  9M-0959 [1] FILM--WARNING  
   
  3N-9344 [1] FILM--SYMBOL  
    CENTER OF GRAVITY SYMBOL
   
  4W-5139 [1] FILM--WARNING - DANGEROUS VOLTAGE  
    FOR USE WITH GENERATOR SETS AND PACKAGED
    GENERATOR SETS
   
  7W-4445 FILM-DANGER VOLTAGE WARNING  
    INSTALL ON RH AND LH SIDE
    OF GENERATOR ON CENTER LOWER
    PORTION OF REMOVABLE COVERS
   
  1W-7854 [1] FILM-INSTRUCTIONS  
    ON SWITCH PLATE ON R.H. SIDE OF
    FUEL SWITCH
   
  8N-7864 [1] FILM-WARNING  
    ELECTRICAL SHOCK HAZARD
   
  4N-9362 [1] FILM-CATERPILLAR  
    ON UPPER FRONT CENTER OF EXPANSION TANK
   
  5P-5391 [1] FILM-STARTING INSTRUCTIONS  
   
  2V-1713 [1] TAG-ETHER STARTING AID  
    ON ETHER AID STARTING BOX ON L.H. FRONT
    OF ENGINE
 

#SEBP15491064
 

359-9756: KIT-ENGINE OVERHAUL

359-9756 ENGINE OVERHAUL KIT
FOR USE WITH 2W-8406 ENGINE AR
TOP END OVERHAUL
23Z1023-3488
SEBP15491064 SEBP1549
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    KIT-ENGINE OVERHAUL
  6N-7960 R [2] CARTRIDGE GP-TURBOCHARGER  
  335-6218 R [8] CYLINDER HEAD GP  
  6I-4357 R [8] INJECTOR GP-FUEL  
  212-8176 R [1] PUMP GP-WATER  
   
  325-1410 [32] SEAL AS-WATER  
  325-1412 [32] SEAL AS-WATER  
   
  1S-5772 [2] GASKET  
  2W-0752 [1] GASKET  
  7E-3772 [8] GASKET  
  7N-4895 [2] GASKET  
  7N-4932 [1] GASKET  
  7N-5089 [8] GASKET  
  121-5736 [2] GASKET (TURBOCHARGER)  
  122-8856 [2] GASKET  
  241-5928 [8] GASKET  
  243-2288 [2] GASKET  
  252-8374 [2] GASKET  
  110-6991 [8] GASKET-CYLINDER HEAD  
  5L-3773 [1] GASKET-EXHAUST ELBOW  
  7W-8145 [8] GASKET-EXHAUST MANIFOLD  
  7N-5080 [8] GASKET-MANIFOLD  
  1S-4810 [2] GASKET-OIL DRAIN  
  1S-6595 [2] GASKET-OIL SUPPLY  
  144-5692 [8] GASKET-PLATE  
  8N-3640 [2] RING-RETAINING  
  272-0757 [16] SEAL  
  272-0758 [8] SEAL  
  272-0759 [8] SEAL  
  127-2176 [8] SEAL-INTEGRAL  
  2J-0157 [16] SEAL-O-RING  
  3J-7354 [32] SEAL-O-RING  
  5H-6734 [1] SEAL-O-RING  
  5P-0840 [16] SEAL-O-RING  
  5P-6302 [1] SEAL-O-RING  
  5P-9890 [2] SEAL-O-RING  
  6V-1250 [16] SEAL-O-RING  
  6V-2695 [4] SEAL-O-RING  
  6V-3917 [4] SEAL-O-RING  
  6V-4589 [1] SEAL-O-RING  
  6V-5066 [2] SEAL-O-RING  
  6V-5101 [8] SEAL-O-RING  
  6V-6809 [1] SEAL-O-RING  
  6V-9769 [8] SEAL-O-RING  
  149-5462 [1] SEAL-O-RING  
  194-9584 [32] SEAL-O-RING  
  214-7568 [23] SEAL-O-RING  
  7N-6806 [4] SEAL-RECTANGULAR  
  316-5980 [16] SEAL-VALVE STEM  
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/05/14
6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines
1981/01/28
Changes Have Been Made To Caterpillar Service Literature
1981/03/04
Instruction Cards For "Go-No Go" Gauges Now Available
1981/07/01
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Use The 6V6059 Microlite With The 6V2196 Inspection Microscope
1982/04/07
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Separate Valve Stem Gauges Available
1982/08/25
Dial Bore Gauge And Size Setting Fixture Available
1982/09/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/15
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27
8S1603 Socket Group For Use On Bolts With 12 Point Heads
1983/04/27
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings
1984/03/07
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts
1984/04/11
Hunting Down The Cheaters
1985/06/01
New Camshaft Installation Tools Available
1985/09/01
Fuel Sulfur Analyzer Available
1986/01/01
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems
1987/05/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Fluid Sampling Tools For Nonpressurized Compartments
1988/03/01
Extraction Tools For "Live Oil Sampling"
1988/05/01
New Service Tools Available
1988/10/01
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment
1988/11/01
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel
1988/12/01
Lube System Screen Assembly Available For Use During Dynamometer Testing
1989/08/01
Temperature Sensor Pocket Kit Available For Danfoss® Temperature Contactors
1989/08/01
4C4213 Insulation Tester for Electrical Power Generation
1989/12/01
Modification Of 2W1054 Screen Assembly For Use During Dynamometer Testing
1989/12/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
4C8753 Extended Collet Available: Problems With 8T1002 Probe For Fuel Setting
1991/01/01
Valve Seat Insert Removal Tools
1993/02/01
New 9U7360 Piston Ring Groove Gauge Group Available
1993/10/01
Field Installation Procedure For Stator Thermocouples and RTDs{7498,4453}
1995/08/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/04/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
New Fabricated Tool for Piston Pin Installation {1225}
2003/08/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
3500 Industrial and Generator Set Engines
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using The 6V9450 Engine Pressure Group{781}
Using The 6V9450 Engine Pressure Group{781}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U6602 Photo-Tach Group{0775}
Using the 1U6602 Photo-Tach Group{0775}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using The 6V7899 Size Setting Fixture Group{651}
Using The 6V7899 Size Setting Fixture Group{651}
Use Of 6V7762 Dual Hook Hoist And Installation Of 6V7919 Conversion Group{641}
Use Of 6V7762 Dual Hook Hoist And Installation Of 6V7919 Conversion Group{641}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
Reuse And Salvage Guidelines
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Shop Review
Engine Component Racks
Engine Component Racks
Engine Stands
Engine Stands
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Bench Test Procedures
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Service Magazine
Remove And Install Cam Bearings With 6V4077 Cam Bearing Tool Group{0621,0622}
1981/05/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Different Thread Lubricant Can Be Used On Connecting Rod And Counterweight Bolts{1202,1218}
1984/05/21
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Camshaft Installation Tools Available{0600}
1985/08/19
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Gas Detector Tubes That Have Expired Dates To &quot;Break In&quot; The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
New Frequency Meter Has Replaceable Voltage Droop Resistor{7471}
1988/08/08
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
Lube System Screen Assembly Available For Use During Dynamometer Testing{1307}
1989/08/21
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Modification Of 2W1054 Screen Assembly For Use During Dynamometer Testing{1307}
1989/12/11
New Temperature Regulators; Regulator Service Hours Changed{1330,0770,1355,7527,7543}
1990/10/15
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
4C8753 Extended Collet Available; Problems With 8T1002 Probe For Fuel Setting{0782}
1991/01/14
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New 9U7360 Piston Ring Groove Gauge Group Available {0763,1214,1215}
1993/10/11
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/01
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/03/29
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3508 :

4W-1423 PLATE & FILM GP
TOOL GP-HAND
9S-7977 TOOL GP-HAND
PANEL GP-POWER SUPPLY
9Y-0815 PANEL GP-POWER SUPPLY
PANEL GP-POWER SUPPLY
9Y-1056 PANEL GP-POWER SUPPLY
9Y-0872 BOX-BUS BAR
9Y-0684 BOX-BUS BAR
SENDER GP
7W-5198 SENDER GP
SENDER GP
7E-8707 SENDER GP
5N-9206 PLATE & FILM GP
GASKET KITS
NAME PLATES AND TRANSFERS
359-9756 KIT-ENGINE OVERHAUL

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.