7N-8702 ENGINE AR S/N 96Y683-2041 PRIOR TO ORDERING 20R-0037 KIT, PLEASE REFERENCE IRM PELJ1171 & VERIFY THAT THE CORRECT REMAN. CYLINDER HEAD. INJECTORS ARE IN THE KIT BASED ON SELECTED ENGINE ARRANGEMENT & SERIAL NUMBER RANGE. SAE STANDARD ENGINE ROTATION 3508

7N-8702 ENGINE AR
S/N 96Y683-2041
PRIOR TO ORDERING 20R-0037 KIT, PLEASE REFERENCE IRM PELJ1171 & VERIFY THAT THE CORRECT REMAN. CYLINDER HEAD. INJECTORS ARE IN THE KIT BASED ON SELECTED ENGINE ARRANGEMENT & SERIAL NUMBER RANGE. SAE STANDARD ENGINE ROTATION

i01516527 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7N-8676 Y	[1]	AFTERCOOLER GP-WATER
		S/N 96Y683-687
7N-8722 Y	[1]	AFTERCOOLER GP-WATER
		S/N 96Y688-2041
7N-8711 Y	[1]	BALANCER GP
4W-0473 Y	[1]	BREATHER GP (CRANKCASE)
		S/N 96Y683-2041
7W-1256 Y	[1]	CAMSHAFT GP
		S/N 96Y683-2041
8N-8993 Y	[1]	CONNECTION GP-WATER (INLET, LH)
		S/N 96Y683-2041
4W-2965 Y	[1]	CONTROL GP-FUEL INJECTION
		S/N 96Y683-2041
7N-8721 Y	[1]	COOLER GP-ENGINE OIL
		S/N 96Y683-784
4W-5893 Y	[1]	COOLER GP-ENGINE OIL
		S/N 96Y785-2041
7N-8633 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
4W-1528 Y	[1]	COVER GP-FLYWHEEL HOUSING
		S/N 96Y683-2041
8N-9642 Y	[1]	COVER GP-FRONT HOUSING
7N-1855 Y	[7]	COVER GP-VALVE MECHANISM
7N-8707 Y	[1]	CRANKSHAFT GP
2W-8240 Y	[1]	CYLINDER BLOCK GP
		S/N 96Y683-1486
115-3500 Y	[1]	CYLINDER BLOCK GP
		S/N 96Y1487-2041
4W-0095 Y	[8]	CYLINDER HEAD GP
		S/N 96Y683-2041
8N-7182 Y	[1]	DAMPER GP
7N-4871 Y	[1]	DRIVE GP-ACCESSORY (UPPER, RH)
7N-1875 Y	[1]	FILLER GP-ENGINE OIL (CYLINDER BLOCK)
7W-9741 Y	[1]	FILTER GP-FUEL (RH)
		S/N 96Y683-2041
4W-6874 Y	[1]	FILTER GP-ENGINE OIL
		S/N 96Y683-2041
7N-7784 Y	[1]	FLYWHEEL GP
8N-7233 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
		S/N 96Y683-794
7C-6366 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
		S/N 96Y795-2041
8N-7174 Y	[1]	GEAR GP-FRONT (STANDARD ROTATION)
4W-5908 Y	[1]	GEAR GP-REAR
		S/N 96Y683-1486
116-9854 Y	[1]	GEAR GP-REAR
		S/N 96Y1487-2041
8N-6712 Y	[1]	GOVERNOR GP
		S/N 96Y683-2041
8N-8112 Y	[1]	HOUSING GP-FLYWHEEL
		S/N 96Y683-709
7W-3723 Y	[1]	HOUSING GP-FLYWHEEL
		S/N 96Y710-1486
102-3540 Y	[1]	HOUSING GP-FLYWHEEL
		S/N 96Y1487-2041
8N-8111 Y	[1]	HOUSING GP-FRONT
		S/N 96Y683-709
7W-3724 Y	[1]	HOUSING GP-FRONT (ACCESSORY DRIVE)
		S/N 96Y710-2041
8N-7734 Y	[1]	LIFTING GP-ENGINE
8N-7716 Y	[1]	LINES GP-AFTERCOOLER WATER
4W-0711 Y	[1]	LINES GP-TURBOCHARGER AIR
		S/N 96Y683-860
9Y-5601 Y	[1]	LINES GP-AIR
		S/N 96Y861-2041
7W-0963 Y	[1]	LINES GP-ENGINE OIL
		S/N 96Y683-784
4W-6062 Y	[1]	LINES GP-ENGINE OIL
		S/N 96Y785-2041
7W-9744 Y	[1]	LINES GP-FUEL INJECTION
		S/N 96Y683-927
9Y-6575 Y	[1]	LINES GP-FUEL INJECTION
		S/N 96Y928-2041
7N-8640 Y	[1]	LINES GP-TURBOCHARGER OIL
1N-4169 Y	[1]	LINES GP-WATER (UPPER)
		S/N 96Y683-927
9Y-9109 Y	[1]	LINES GP-WATER (UPPER)
		S/N 96Y928-2041
1N-4171 Y	[1]	LINES GP-WATER (LOWER)
		S/N 96Y683-2041
7N-8673 Y	[1]	LINES GP-WATER (TURBOCHARGER)
7N-8674 Y	[1]	MANIFOLD GP-EXHAUST
		S/N 96Y683-1322
6I-0041 Y	[1]	MANIFOLD GP-EXHAUST (WATER COOLED)
		S/N 96Y1323-2041
2W-9592 Y	[1]	METER GP-SERVICE
		S/N 96Y683-2041
7N-6902 Y	[1]	PAN GP-OIL
		S/N 96Y683-794
7C-6887 Y	[1]	PAN GP-OIL (DEEP SUMP)
		S/N 96Y795-2041
7W-1988 Y	[8]	PISTON & ROD GP
		S/N 96Y683-2041
7N-8715 Y	[1]	PUMP GP-ENGINE OIL (2-SECTION GEAR)
7W-2063 Y	[8]	PUMP GP-FUEL INJECTION
		S/N 96Y683-716
7C-2233 Y	[8]	PUMP GP-FUEL INJECTION
		S/N 96Y717-973
9Y-1796 Y	[1]	PUMP GP-FUEL INJECTION
		S/N 96Y974-2041
8N-6151 Y	[1]	PUMP GP-FUEL TRANSFER (1-SECTION GEAR)
2W-9726 Y	[1]	PUMP GP-WATER
		S/N 96Y683-2041
8N-7643 Y	[1]	HOUSING & REGULATOR GP (INLET CONTROL)
		S/N 96Y683-2041
7N-1854 Y	[1]	SEAL GP-CRANKSHAFT
		S/N 96Y683-709
7W-3813 Y	[1]	SEAL GP-CRANKSHAFT
		S/N 96Y710-2041
7N-4869 Y	[1]	SHUTOFF GP-MANUAL
8N-7717 Y	[1]	TANK GP-EXPANSION
2W-9598 Y	[1]	TURBOCHARGER GP
		S/N 96Y683-700
1W-5349 Y	[1]	TURBOCHARGER GP
		S/N 96Y701-860
9Y-5597 Y	[1]	TURBOCHARGER GP
		S/N 96Y861-1673
135-0178 Y	[1]	TURBOCHARGER GP
		S/N 96Y1674-2041
4W-1035 Y	[8]	VALVE MECHANISM GP
		S/N 96Y683-1989
195-1926 Y	[8]	VALVE MECHANISM GP
		S/N 96Y1990-2041

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE GASKET KIT(S):
6V-9897 Y	[1]	KIT-GASKET (SINGLE FUEL INJECTOR)
457-6694 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
355-0776 Y	[1]	KIT-GASKET (SINGLE CYLINDER HEAD)
457-5251 Y	[1]	KIT-ENGINE GASKET (OIL COOLER, LINES)
457-9709 Y	[1]	KIT-ENGINE GASKET (FRONT COVER)
457-7652 Y	[1]	KIT-ENGINE GASKET (REAR COVER)
457-9198 Y	[1]	KIT-ENGINE GASKET (TURBOCHARGER)
301-1151 Y	[1]	KIT-GASKET (WATER PUMP)
460-0734 Y	[1]	KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE)
353-5995 Y	[1]	KIT-SEAL (CYLINDER)
Y		SEPARATE ILLUSTRATION

#SEBP15530011

357-0851: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

357-0851 ENGINE AR-COMPLETE
S/N 96Y1487-UP
THIS ENGINE ARRANGEMENT IS FOR REFERENCE PURPOSES ONLY. IT IS NOT TO BE USED FOR SERVICE OR PRODUCTION, PROVIDES ENGINE ARRANGEMENT WHEN CONVERT 2W-8860 TO 236-2458, 3508 MUI TO TIER I EMISSION RETROFIT EQUIVALENT LEVEL, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
FOR USE WITH REHS4159, 3508, 1800 RPM, 96Y01487-UP
FIELD INSTALLATION

i04000008 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
108-1581 Y	[1]	AFTERCOOLER GP-TREATED WATER
101-0833 Y	[1]	BALANCER GP (FRONT)
101-0838 Y	[1]	BREATHER GP (CRANKCASE)
106-4582 Y	[1]	CAMSHAFT GP
8N-8993 Y	[1]	CONNECTION GP-WATER (INLET, LH)
220-2677 Y	[1]	CONTROL & MTG GP-ENGINE ELEK (PRIMARY)
231-7069 Y	[1]	CONTROL & MTG GP-ENGINE ELEK (SECONDARY)
4W-5893 Y	[1]	COOLER GP-ENGINE OIL
271-7784 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
138-0505 Y	[1]	COVER GP-FLYWHEEL HOUSING
107-0278 Y	[1]	COVER GP-FRONT HOUSING
101-0831 Y	[5]	COVER GP-VALVE MECHANISM
101-0336 Y	[1]	CRANKSHAFT GP
237-7957 Y	[1]	CYLINDER BLOCK GP
101-0830 Y	[8]	CYLINDER HEAD GP
8N-7182 Y	[1]	DAMPER GP
7E-7647 Y	[1]	DRIVE GP-ACCESSORY (LOWER, LH)
112-6033 Y	[1]	FILLER GP-ENGINE OIL
112-4921 Y	[1]	FILTER GP-ENGINE OIL (RH)
7W-9741 Y	[1]	FILTER GP-FUEL (RH)
7N-7784 Y	[1]	FLYWHEEL GP
7C-6366 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
8N-7174 Y	[1]	GEAR GP-FRONT (STANDARD ROTATION)
101-0834 Y	[1]	GEAR GP-REAR
8N-7643 Y	[1]	HOUSING & REGULATOR GP (INLET CONTROL)
107-7177 Y	[1]	HOUSING GP-FLYWHEEL
4P-5426 Y	[1]	HOUSING GP-FRONT (ACCESSORY DRIVE)
7E-6872 Y	[1]	LIFTING GP-ENGINE
107-0860 Y	[1]	LINES GP-AIR
245-3678 Y	[1]	LINES GP-ENGINE OIL
234-8722 Y	[1]	LINES GP-FUEL INJECTION
112-5010 Y	[1]	LINES GP-TURBOCHARGER OIL
116-9870 Y	[1]	LINES GP-TURBOCHARGER WATER
107-0476 Y	[1]	LINES GP-WATER (UPPER)
115-7849 Y	[1]	LINES GP-WATER (LOWER)
245-3679 Y	[1]	LINES GP-WATER (AFTERCOOLER)
123-0324 Y	[1]	MANIFOLD GP-EXHAUST
7C-6887 Y	[1]	PAN GP-OIL (DEEP SUMP)
281-6139 Y	[8]	PISTON & ROD GP
9Y-8175 Y	[1]	PUMP GP-AUXILIARY WATER (AFTERCOOLER)
7N-8715 Y	[1]	PUMP GP-ENGINE OIL (2-SECTION GEAR)
100-8774 Y	[8]	PUMP GP-FUEL INJECTION
8N-6151 Y	[1]	PUMP GP-FUEL TRANSFER (1-SECTION GEAR)
2W-9726 Y	[1]	PUMP GP-WATER
7W-3813 Y	[1]	SEAL GP-CRANKSHAFT
317-1696 Y	[1]	SHIELD GP-EXHAUST
321-3844 Y	[1]	SHIELD GP-EXHAUST
8N-7717 Y	[1]	TANK GP-EXPANSION
158-6600 Y	[1]	TURBOCHARGER GP
224-9869 Y	[8]	VALVE MECHANISM GP
235-6318	[1]	ELECTRONICS GP-ENGINE RATINGS

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP15530012

122-8966: AIR COMPRESSOR GP

AIR COMPRESSOR GP

122-8966 AIR COMPRESSOR GP
S/N 96Y2161-UP; 69Z923-UP
PART OF 8N-8360 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@126-6110@@@@@
AN ATTACHMENT

i00512937 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
2.	3F-5289	[1]	KEY-CRANKSHAFT
3.	6V-0387	[1]	PLUG-PIPE
4.	8M-7065	[1]	GASKET (AIR INLET)
5.	9M-0397	[1]	ADAPTER
6.	7F-6547	[1]	NUT
7.	3B-4505	[2]	LOCKWASHER
8.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
9.	4P-3966	[1]	PISTON & ROD AS
10.	124-5572	[1]	VALVE AS-RELIEF (AIR COMPRESSOR)

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUSES SEALS, BEARING WASHERS, INSERTS, & GASKETS)
	7E-8925	[1]	KIT-STANDARD RING (AIR COMPRESSOR)
			(INCLUDES RINGS & INSTRUCTION SHEET)
	164-7572	[1]	KIT-RING (AIR COMPRESSOR)
			(INCLUDES GASKET, SPRINGS, VALVES, SEATS, PISTON, STOPS, & O-RINGS)
	150-5146	[1]	KIT-UNLOADER (AIR COMPRESSOR)

#SEBP15530013

126-6110: AIR COMPRESSOR GP

AIR COMPRESSOR GP

126-6110 AIR COMPRESSOR GP
PART OF 8N-8360 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@122-8966@@@@@
AN ATTACHMENT

i00526752 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
2.	3F-5289	[1]	KEY-CRANKSHAFT
3.	6V-0387	[1]	PLUG-PIPE
4.	8M-7065	[1]	GASKET (AIR INLET)
5.	9M-0397	[1]	ADAPTER
6.	7F-6547	[1]	NUT
7.	3B-4505	[2]	LOCKWASHER
8.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
9.	4P-3966	[1]	PISTON & ROD AS
10.	124-5572	[1]	VALVE AS-RELIEF (AIR COMPRESSOR)

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUSES SEALS, BEARINGS, WASHERS, INSERTS, & GASKETS)
	164-7572	[1]	KIT-RING (AIR COMPRESSOR)
			(INCLUDES RINGS & INSTRUCTION SHEET)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES GASKET, SPRINGS, VALVES, SEATS, PISTONS, STOPS & O-RINGS)
	150-5146	[1]	KIT-UNLOADER (AIR COMPRESSOR)

#SEBP15530014

144-0742: AIR COMPRESSOR GP

AIR COMPRESSOR GP

144-0742 AIR COMPRESSOR GP
S/N 96Y683-2159; 69Z275-922
PART OF 8N-8360 AIR COMPRESSOR GP
AN ATTACHMENT

i00893649 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-4505	[4]	LOCKWASHER
2.	2B-2695	[4]	BOLT (5/16-18X0.875-IN)
3.	8M-7065	[1]	GASKET (AIR INLET)
4.	9M-0397	[1]	ADAPTER
5.	4W-9479	[1]	MANIFOLD-EXHAUST
6.	1S-7107	[1]	GASKET
7.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	7X-7732	[2]	PLUG-PIPE
9.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
10.	3B-4506	[6]	LOCKWASHER
11.	7N-7442	[2]	GASKET
12.	034-4160	[8]	BOLT-LOCKING (5/16-18X1-IN)
13.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
14.	7N-7446	[1]	GASKET
15.	8H-9789	[2]	BALL BEARING
16.	7N-7445	[1]	CYLINDER BLOCK
17.	7N-7448	[1]	GASKET
18.	7N-7447	[1]	HEAD AS-COMPRESSOR
	5L-5502	[1]	FITTING
	124-5572	[1]	VALVE AS-RELIEF (AIR COMPRESSOR)
19.	0S-1619	[5]	BOLT (3/8-16X3-IN)
20.	7N-7450	[1]	COVER-UNLOADER
21.	3B-4504	[2]	LOCKWASHER
22.	0S-1615	[2]	BOLT (1/4-20X0.75-IN)
23.	7N-7451	[1]	GASKET-UNLOADER
24.	0L-1352	[1]	BOLT (3/8-16X3.25-IN)
25.	1W-9276	[1]	CRANKSHAFT-AIR COMPRESSOR
26.	1W-9275	[1]	CRANKCASE-COMPRESSOR
27.	1W-9277	[1]	COVER-AIR COMPRESSOR
28.	1W-9279	[1]	SEAL
29.	1W-9278	[1]	COVER-AIR COMPRESSOR
30.	6F-7063	[1]	NUT-SLOTTED
31.	5P-8026	[1]	PIN-COTTER
32.	4H-3157	[1]	KEY-WOODRUFF
33.	4W-9489	[1]	RING-LOCK

			AVAILABLE REPAIR KIT(S):
	7N-7435	[1]	KIT-AIR COMPRESSOR (MAJOR REPAIR)
			(INCLUDES VALVES, VALVE SEATS, BEARINGS, SPRINGS, GASKETS, COVER, SEALS, PINS, WASHERS & GUIDES)
	4P-6409	[1]	KIT-PIN (AIR COMPRESSOR)
	144-0503	[1]	KIT-PISTON & RING (STANDARD)(AIR COMPRESSOR)
			(INCLUDES PISTON, RING KIT, PISTON PIN & PISTON PIN BUTTON)
	144-0502	[1]	KIT-PISTON RING (STANDARD)(AIR COMPRESSOR)
			(INCLUDES PISTON RINGS & RING ENVELOPES)
	138-2887	[1]	KIT-ROD & BEARING (AIR COMPRESSOR)
			(INCLUDES ROD ASSEMBLY & BEARING KIT)

#SEBP15530015

1W-8495: AIR COMPRESSOR GP

AIR COMPRESSOR GP

1W-8495 AIR COMPRESSOR GP
PART OF 8N-8360 AIR COMPRESSOR GP
AN ATTACHMENT

i00353908 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-4505	[4]	LOCKWASHER
2.	2B-2695	[4]	BOLT (5/16-18X0.875-IN)
3.	8M-7065	[1]	GASKET (AIR INLET)
4.	9M-0397	[1]	ADAPTER
5.	4W-9479	[1]	MANIFOLD-EXHAUST
6.	1S-7107	[1]	GASKET
7.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	4B-4845	[2]	PLUG
9.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
10.	3B-4506	[6]	LOCKWASHER
11.	7N-7442	[2]	GASKET
12.	034-4160	[8]	BOLT-LOCKING (5/16-18X1-IN)
15.	7N-7446	[1]	GASKET
16.	8H-9789	[2]	BALL BEARING
17.	7N-7445	[1]	CYLINDER BLOCK
18.	2B-0858	[1]	PLUG-PIPE
19.	7N-7448	[1]	GASKET
20.	7N-7447	[1]	HEAD AS-COMPRESSOR
21.	0S-1619	[5]	BOLT (3/8-16X3-IN)
22.	7N-7450	[1]	COVER-UNLOADER
23.	3B-4504	[2]	LOCKWASHER
24.	0S-1615	[2]	BOLT (1/4-20X0.75-IN)
25.	7N-7451	[1]	GASKET-UNLOADER
26.	0L-1352	[1]	BOLT (3/8-16X3.25-IN)
27.	1W-9276	[1]	CRANKSHAFT-AIR COMPRESSOR
28.	1W-9275	[1]	CRANKCASE-COMPRESSOR
29.	1W-9277	[1]	COVER-AIR COMPRESSOR
30.	1W-9279	[1]	SEAL
31.	1W-9278	[1]	COVER-AIR COMPRESSOR
32.	6F-7063	[1]	NUT-SLOTTED
33.	5P-8026	[1]	PIN-COTTER
34.	4H-3157	[1]	KEY-WOODRUFF
35.	4W-9489 C	[1]	RING-LOCK

			AVAILABLE REPAIR KIT(S):
	7N-7435	[1]	KIT-AIR COMPRESSOR (MAJOR REPAIR)
			(INCLUDES VALVES, SEATS, BEARINGS, SPRINGS, GASKETS, COVER, SEALS, PINS, WASHERS, & GUIDES)
	4P-6409	[1]	KIT-PIN (AIR COMPRESSOR)
	144-0502	[1]	KIT-PISTON RING (STANDARD)(AIR COMPRESSOR)
			(INCLUDES PISTON RINGS & RING ENVELOPES)
	144-0503	[1]	KIT-PISTON & RING (STANDARD)(AIR COMPRESSOR)
			(INCLUDES PISTON, RING KIT, PISTON PIN & PISTON PIN BUTTON)
	138-2887	[1]	KIT-ROD & BEARING (AIR COMPRESSOR)
			(INCLUDES ROD ASSEMBLY & BEARING KIT .010 OD)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP15530016

8N-8360: AIR COMPRESSOR GP

AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP
12 CU. FT./MIN. BELT DRIVEN
Type 1
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT

i00415126 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT
2.	1N-2902	[1]	PULLEY
3.	6N-9042	[1]	GASKET
4.	5R-1771	[2]	BOLT (3/8-16X5.5-IN)
5.	2W-8338 C	[1]	BRACKET AS
6.	1W-0427 I	[1]	HOSE AS
7.	9M-6522 C	[2]	CONNECTOR (1/2-14 NPTF)
8.	0S-1594	[5]	BOLT (3/8-16X1-IN)
9.	5M-2894 C	[11]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	3V-6153 I	[1]	HOSE AS
11.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
12.	9L-5125	[1]	ELBOW
13.	032-1269	[3]	ELBOW
14.	3B-0551 C	[1]	PLUG-PIPE
15.	4F-4879 C	[1]	BOLT (3/8-16X0.5-IN)
16.	1W-6263 CI	[2]	HOSE AS
17.	061-9593	[1]	ADAPTER
18.	8S-3215 C	[1]	CLAMP-TUBE
19.	2P-1306 C	[1]	TEE
20.	2N-5104	[1]	CLAMP
21.	9F-2247	[4]	PLUG-PIPE
22.	6H-7127 C	[1]	SPACER (13/32X5/8X9/16-IN THK)
23.	033-2177 C	[1]	TEE-PIPE
24.	6N-8744 C	[2]	MOUNT
25.	9L-9132 C	[2]	WASHER (10.2X25.5X2.5-MM THK)
26.	9M-4815 C	[1]	CLIP
27.	2B-0858	[1]	PLUG-PIPE
28.	1A-5964 C	[1]	BOLT (3/8-16X4.5-IN)
29.	4B-4283 C	[2]	WASHER (20.6X37.5X3.5-MM THK)
30.	4J-4102	[1]	SPACER (0.49X0.69X3.0-IN THK)
31.	7N-5743	[1]	ADAPTER AS
	7N-5740	[1]	ADAPTER
32.	7N-5244	[1]	BUSHING
33.	8M-5255	[1]	SEAL-O-RING
34.	0S-1590	[8]	BOLT (3/8-16X2-IN)
35.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
36.	6V-8172 C	[1]	SEAL-LIP TYPE
37.	9L-5254	[1]	ELBOW (45 DEG)
38.	6B-8128 C	[1]	NIPPLE-PIPE
39.	8B-2664 C	[1]	BUSHING-REDUCER
40.	2W-8202 C	[1]	GUARD AS
41.	1W-8238	[1]	ADAPTER
	7N-4945	[1]	GASKET
42.	0S-1595	[4]	BOLT (1/2-13X1.25-IN)
	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
43.	8N-3504	[1]	V-BELT GP
44.	0S-1594 C	[9]	BOLT (3/8-16X1-IN)
45.	4D-0514	[1]	PLUG-PIPE
46.	1N-2903	[1]	PULLEY
47.	5J-7303	[1]	ELBOW
48.	9S-8752 C	[3]	NUT-FULL (3/8-16-THD)
49.	1N-2929	[1]	BASE-AIR COMPRESSOR
50.	3B-4618	[1]	PIN-COTTER
51.	1W-8495 Y	[1]	AIR COMPRESSOR GP
52.	1D-4540	[2]	BOLT (5/16-18X2.75-IN)
	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
53.	4B-7770 C	[1]	TEE
54.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
55.	4N-9681	[1]	GOVERNOR AS-AIR COMPRESSOR
	2S-2923	[1]	COVER AS
56.	6L-1883	[1]	GASKET
57.	030-7972 C	[1]	ELBOW
58.	061-9593	[1]	ADAPTER
59.	1W-0428 CI	[1]	HOSE AS
60.	3B-0551	[1]	PLUG-PIPE
61.	4B-4283 C	[1]	WASHER (20.6X37.5X3.5-MM THK)
62.	9L-9132 C	[2]	WASHER (10.2X25.5X2.5-MM THK)
63.	6N-8744 C	[1]	MOUNT
64.	032-1269 C	[2]	ELBOW
65.	2M-4453 C	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	9M-0402	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES VALVE, FILTER, SPRING, COVER, & GROMMETS)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP15530017

8N-8360: AIR COMPRESSOR GP

AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP
12 CU. FT./MIN. BELT DRIVEN
Type 2
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT

i00415133 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT (AIR COMPRESSOR)
2.	1N-2902	[1]	PULLEY
3.	6N-9042	[1]	GASKET
4.	5R-1771	[2]	BOLT (3/8-16X5.5-IN)
5.	2W-8338	[1]	BRACKET AS
6.	1W-0427 I	[1]	HOSE AS
7.	9M-6522	[3]	CONNECTOR (1/2-14 NPTF)
8.	0S-1594	[5]	BOLT (3/8-16X1-IN)
9.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	3V-6153 I	[1]	HOSE AS
11.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
12.	9L-5125	[1]	ELBOW
13.	032-1269	[4]	ELBOW
14.	3B-0551	[1]	PLUG-PIPE
15.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
16.	1W-6263 I	[2]	HOSE AS
17.	061-9593	[1]	ADAPTER
18.	8S-3215	[1]	CLAMP-TUBE
19.	2P-1306	[1]	TEE
20.	2N-5104	[1]	CLAMP
21.	9F-2247	[4]	PLUG-PIPE
22.	6H-7127	[1]	SPACER (13/32X5/8X9/16-IN THK)
23.	033-2177	[1]	TEE-PIPE
24.	6N-8744	[2]	MOUNT
25.	9L-9132	[2]	WASHER (10.2X25.5X2.5-MM THK)
26.	1N-2929	[1]	BASE-AIR COMPRESSOR
27.	2B-0858	[1]	PLUG-PIPE
28.	1A-5964	[1]	BOLT (3/8-16X4.5-IN)
29.	4B-4283	[2]	WASHER (20.6X37.5X3.5-MM THK)
30.	4J-4102	[1]	SPACER (0.49X0.69X3.0-IN THK)
31.	9S-8752	[3]	NUT-FULL (3/8-16-THD)
32.	030-7972	[1]	ELBOW
33.	8B-2664	[1]	BUSHING-REDUCER
34.	7C-4165	[1]	ADAPTER AS
	7C-0234	[1]	ADAPTER
35.	7N-5244	[1]	BUSHING
36.	8M-5255	[1]	SEAL-O-RING
37.	0S-1590	[8]	BOLT (3/8-16X2-IN)
38.	5M-2894	[9]	WASHER-HARD (10.2X18.5X2.5-MM THK)
39.	6V-7196 C	[1]	SEAL-LIP TYPE
40.	9M-4815	[1]	CLIP
41.	6B-8128	[1]	NIPPLE-PIPE
42.	4F-4879	[1]	BOLT (3/8-16X0.5-IN)
43.	2W-8202	[1]	GUARD AS
44.	1W-8238	[1]	ADAPTER
	7N-4945	[1]	GASKET
45.	0S-1595	[4]	BOLT (1/2-13X1.25-IN)
	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
46.	8N-3504	[1]	V-BELT GP (AIR COMPRESSOR)
47.	0S-1594	[9]	BOLT (3/8-16X1-IN)
48.	4D-0514	[1]	PLUG-PIPE
49.	9Y-5285 C	[1]	PULLEY AS
50.	053-5065 C	[1]	SLEEVE
51.	6N-8744	[1]	MOUNT
52.	032-1269	[1]	ELBOW
53.	3B-4618	[1]	PIN-COTTER
54.	1W-8495 Y	[1]	AIR COMPRESSOR GP
55.	1D-4540	[2]	BOLT (5/16-18X2.75-IN)
	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
56.	4B-7770	[1]	TEE
57.	2M-4453	[1]	SEAL-O-RING
58.	4N-9681	[1]	GOVERNOR AS-AIR COMPRESSOR
	2S-2923	[1]	COVER AS
59.	6L-1883	[1]	GASKET
60.	9L-9132	[8]	WASHER (10.2X25.5X2.5-MM THK)
61.	061-9593	[1]	ADAPTER
62.	1W-0428 I	[1]	HOSE AS
63.	3B-0551	[1]	PLUG-PIPE
64.	4B-4283	[1]	WASHER (20.6X37.5X3.5-MM THK)
65.	5J-7303	[1]	ELBOW

			AVAILABLE REPAIR KIT(S):
	9M-0402	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES VALVE, FILTER, SPRING, COVER, & GROMMETS)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP15530018

8N-8360: AIR COMPRESSOR GP

AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP
S/N 96Y683-2159; 69Z275-922
12 CU. FT./MIN. BELT DRIVEN
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT

i00893648 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-2902	[1]	PULLEY
2.	1N-2929	[1]	BASE-AIR COMPRESSOR
3.	1W-0427 I	[1]	HOSE AS
4.	150-4213 I	[2]	HOSE AS
5.	1W-8238	[1]	ADAPTER
6.	2P-1306	[1]	TEE
7.	2W-8202	[1]	GUARD AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
8.	2W-8338	[1]	BRACKET AS
9.	3V-6153 I	[1]	HOSE AS
10.	4B-7770	[1]	TEE
11.	4N-9681	[1]	GOVERNOR AS-AIR COMPRESSOR
	2S-2923	[1]	COVER AS
12.	5F-5434	[1]	VALVE AS-VENT
13.	6L-1883	[1]	GASKET
14.	6N-8744	[3]	MOUNT
15.	6N-9042	[1]	GASKET
16.	7C-4165	[1]	ADAPTER AS
	127-5400	[1]	BUSHING
17.	7N-4945	[1]	GASKET
18.	8N-3504	[1]	V-BELT GP (AIR COMPRESSOR)
19.	9M-0378	[2]	BOLT (5/16-18X2.87-IN)
20.	9M-0766 C	[1]	BRACKET
21.	9Y-5285	[1]	PULLEY AS
	053-5065	[1]	SLEEVE
22.	033-2177	[1]	TEE-PIPE
23.	144-0742 CY	[1]	AIR COMPRESSOR GP
24.	152-1005 I	[1]	HOSE AS
25.	235-2484	[1]	SEAL-LIP TYPE
26.	030-7972	[1]	ELBOW
27.	032-1269	[5]	ELBOW
28.	061-9593	[2]	ADAPTER
29.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
30.	0S-1590	[8]	BOLT (3/8-16X2-IN)
31.	0S-1594 C	[15]	BOLT (3/8-16X1-IN)
32.	0S-1595	[4]	BOLT (1/2-13X1.25-IN)
33.	1A-5964	[1]	BOLT (3/8-16X4.5-IN)
34.	5P-0840	[1]	SEAL-O-RING
35.	3B-4618	[1]	PIN-COTTER
36.	3S-8664 C	[3]	CLIP (LOOP)
37.	4F-4879	[1]	BOLT (3/8-16X0.5-IN)
38.	4J-4102	[1]	SPACER (0.49X0.69X3.0-IN THK)
39.	5J-7303	[1]	ELBOW
40.	5M-2894	[15]	WASHER-HARD (10.2X18.5X2.5-MM THK)
41.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
42.	5P-8248 C	[3]	WASHER-HARD (20X36.5X3.5-MM THK)
43.	5R-1771	[2]	BOLT (3/8-16X5.5-IN)
44.	6B-8128	[1]	NIPPLE-PIPE
45.	8B-2664	[1]	BUSHING-REDUCER
46.	235-3548	[1]	SEAL-O-RING
47.	8T-6757	[4]	PLUG-PIPE
48.	8T-6759	[1]	PLUG-PIPE
49.	8T-6761	[2]	PLUG-PIPE (1-11-1/2 NPT THD)
50.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
51.	9L-5125	[1]	ELBOW
52.	9L-9132	[8]	WASHER (10.2X25.5X2.5-MM THK)
53.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
54.	9M-6522	[3]	CONNECTOR (1/2-14 NPTF)
55.	9S-8752	[3]	NUT-FULL (3/8-16-THD)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP15530019

8N-8360: AIR COMPRESSOR GP

AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP
S/N 96Y2160-2160
12 CU. FT./MIN. BELT DRIVEN
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT

i03636176 SEBP1553

For full view, you need register

Parts for your 3508 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-2902	[1]	PULLEY
2.	1N-2929	[1]	BASE-AIR COMPRESSOR
3.	1W-0427 I	[1]	HOSE AS
4.	150-4213 I	[2]	HOSE AS
5.	1W-8238	[1]	ADAPTER
6.	2P-1306	[1]	TEE
7.	2W-8202	[1]	GUARD AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
8.	2W-8338	[1]	BRACKET AS
9.	3V-6153 I	[1]	HOSE AS
10.	4B-7770	[1]	TEE
11.	4N-9681	[1]	GOVERNOR AS-AIR COMPRESSOR
	2S-2923	[1]	COVER AS
12.	5F-5434	[1]	VALVE AS-VENT
13.	6L-1883	[1]	GASKET
14.	6N-8744	[3]	MOUNT
15.	6N-9042	[1]	GASKET
16.	7C-4165	[1]	ADAPTER AS
	127-5400	[1]	BUSHING
17.	7N-4945	[1]	GASKET
18.	8N-3504	[1]	V-BELT GP (AIR COMPRESSOR)
19.	9M-0378	[2]	BOLT (5/16-18X2.87-IN)
20.	9M-0766	[1]	BRACKET
21.	9Y-5285	[1]	PULLEY AS
	053-5065	[1]	SLEEVE
22.	033-2177	[1]	TEE-PIPE
23.	126-6110 CY	[1]	AIR COMPRESSOR GP
24.	152-1005 I	[1]	HOSE AS
25.	235-2484	[1]	SEAL-LIP TYPE
26.	030-7972	[1]	ELBOW
27.	032-1269	[5]	ELBOW
28.	061-9593	[2]	ADAPTER
29.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
30.	0S-1590	[8]	BOLT (3/8-16X2-IN)
31.	0S-1594	[15]	BOLT (3/8-16X1-IN)
32.	0S-1595	[4]	BOLT (1/2-13X1.25-IN)
33.	1A-5964	[1]	BOLT (3/8-16X4.5-IN)
34.	5P-0840	[1]	SEAL-O-RING
35.	3B-4618	[1]	PIN-COTTER
36.	3S-8664	[3]	CLIP (LOOP)
37.	4F-4879	[1]	BOLT (3/8-16X0.5-IN)
38.	4J-4102	[1]	SPACER (0.49X0.69X3.0-IN THK)
39.	5J-7303	[1]	ELBOW
40.	5M-2894	[15]	WASHER-HARD (10.2X18.5X2.5-MM THK)
41.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
42.	5P-8248	[3]	WASHER-HARD (20X36.5X3.5-MM THK)
43.	5R-1771	[2]	BOLT (3/8-16X5.5-IN)
44.	6B-8128	[1]	NIPPLE-PIPE
45.	8B-2664	[1]	BUSHING-REDUCER
46.	235-3548	[1]	SEAL-O-RING
47.	8T-6757	[4]	PLUG-PIPE
48.	8T-6759	[1]	PLUG-PIPE
49.	8T-6761	[2]	PLUG-PIPE (1-11-1/2 NPT THD)
50.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
51.	9L-5125	[1]	ELBOW
52.	9L-9132	[8]	WASHER (10.2X25.5X2.5-MM THK)
53.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
54.	9M-6522	[3]	CONNECTOR (1/2-14 NPTF)
55.	9S-8752	[3]	NUT-FULL (3/8-16-THD)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Engine Replacement
1982/04/07

Reference Chart for Engine Improvements
1982/11/10

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26

Engine Rotation Can Be Changed On 3500 Series Engines
1985/08/01

Uprated 3500 Series Engines Now Available
1986/02/01

Alternator/Generator Output Test On The Engine
1987/05/01

Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01

Dynamometer Testing of Electronic Engines{1000}
1995/10/01

New Engine News Special Edition, Product Support Update-3500 Diesel Commercial Engines, SEBD9243 Is Available{1000}
1997/05/01

Troubleshooting Data Sheet For Diesel Engines {1000}
1997/08/01

Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly{1218}
1998/03/01

Revised Maintenance Schedules For 3500 Diesel Commercial Engines {0374,1000}
1999/10/01

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18

New Engine News Format {0374}
1999/12/01

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center {1000}
2002/03/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02

How Is Service Information Accessed / Used {1000}
2009/04/27

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

Concerns for Engines with Seawater Cooling in Oil Polluted Water {1000, 1394}
2010/06/17

Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18

Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
2013/10/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Alignment Of Caterpillar Diesel Engines To Caterpillar Marine Transmission (7271-36W){1000, 3300}
Alignment Of Caterpillar Diesel Engines To Caterpillar Marine Transmission (7271-36W){1000, 3300}

Using 6V9433 Crankshaft Removal Group{1000, 1202}
Using 6V9433 Crankshaft Removal Group{1000, 1202}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Sea Trial Measurements On Caterpillar Marine Engines{1000, 3300}
Sea Trial Measurements On Caterpillar Marine Engines{1000, 3300}

Marine Propulsion Engine Start-Up Checklist{1000}
Marine Propulsion Engine Start-Up Checklist{1000}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}

Procedure for Cleaning an Engine that is Saturated with Water{1000}
Procedure for Cleaning an Engine that is Saturated with Water{1000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}

Crankshaft Front and Rear End Oil Seals May Fail on Certain Cat® Engines {1000, 7555}
Crankshaft Front and Rear End Oil Seals May Fail on Certain Cat^® Engines {1000, 7555}

Specifications

Engine Design
3500 Marine Engines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT REMAN INTRODUCES TOP END OVERHAUL KITS FOR 3500 MARINE ENGINES
CAT REMAN INTRODUCES TOP END OVERHAUL KITS FOR 3500 MARINE ENGINES

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Testing and Adjusting

Engine Rotation
3500 Marine Engines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Engine Rotation Can Be Changed On 3500 Series Engines{1000}
1985/08/05

Uprated 3500 Series Engines Now Available{1000}
1986/01/27

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Replacing 6.25" Bore Marine Engines and 6.25" Bore Petroleum Engines With The 3500 Family Of Engines{1000}
1988/02/22

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3508 :

2W-8866 ENGINE AR

2W-8860 ENGINE AR

1W-4213 ENGINE AR

158-6170 CONVERSION AR-GENERATOR SET

158-6168 CONVERSION AR-GENERATOR SET

141-5085 CONVERSION AR-GENERATOR SET

4W-2158 CONVERSION AR-ENGINE

4W-1520 CONVERSION AR-ENGINE

357-0851 ENGINE AR-COMPLETE

122-8966 AIR COMPRESSOR GP

126-6110 AIR COMPRESSOR GP

144-0742 AIR COMPRESSOR GP

1W-8495 AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP

Truck sale:

61,000

Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

307.208

Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

84,962

Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.

Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction

145.548

Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung