AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-5861 CYLINDER HEAD AS S/N 50Y873-1304; 66Z378-578 PART OF 4W-9560 CYLINDER HEAD GP FIELD REPLACEMENT ORDER @@@@@ 7E-5859@@@@@ 3512


BASIC ENGINE
CYLINDER HEAD GP

MARINE ENGINE 3512 MARINE ENGINE 50Y
 3512 Marine Engine 50Y00647-01304 SEBP1554 3512 50Y   (1980)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
299-3519 CYLINDER HEAD AS
CYLINDER HEAD AS
7E-5859 CYLINDER HEAD AS
CYLINDER HEAD AS
7E-5861 CYLINDER HEAD AS
CYLINDER HEAD GP
101-0830 CYLINDER HEAD GP
CYLINDER HEAD GP
10R-7765 CYLINDER HEAD GP
CYLINDER HEAD GP
299-3521 CYLINDER HEAD GP
 

#SEBP15540100
 

7E-5861: CYLINDER HEAD AS

7E-5861 CYLINDER HEAD AS
S/N 50Y873-1304; 66Z378-578
PART OF 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7E-5859@@@@@
i00091637 SEBP1554
7E5861 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 3B-0645 [5] PLUG-CUP  
3. 7E-5862 [2] INSERT-VALVE SEAT (INLET)  
4. 3J-7354 [4] SEAL-O-RING  
5. 118-9491 [2] INSERT-VALVE SEAT (EXHAUST)  
6. 3B-0623 [5] PLUG-CUP  
7. 9S-8002 [4] PLUG (7/16-20-THD)  
 

#SEBP15540101
 

101-0830: CYLINDER HEAD GP

101-0830 CYLINDER HEAD GP
S/N 50Y647-1304
PART OF 376-4849 ENGINE AR-COMPLETE
i03431829 SEBP1554
1010830 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 317-2440 CY [1] CYLINDER HEAD GP  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 420-0652 [4] SEAL AS-WATER  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 420-0653 [4] SEAL AS-WATER  
9. 110-6991 [1] GASKET-CYLINDER HEAD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540102
 

10R-7765: CYLINDER HEAD GP

10R-7765 CYLINDER HEAD GP
S/N 50Y647-1304
PART OF 10R-9762 KIT-CONVERSION
i04047671 SEBP1554
10R7765 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [4] LOCK-RETAINER  
2. 133-9306 [2] GUIDE-VALVE (STANDARD)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)  
3. Y [1] CYLINDER HEAD AS  
4. 194-4897 [2] VALVE-EXHAUST  
5. 197-6995 [2] GUIDE-VALVE (STANDARD)  
  276-3875 AB GUIDE-VALVE (0.127-MM OS)  
  276-3876 AB GUIDE-VALVE (0.25-MM OS)  
6. 197-7055 [4] LOCK-RETAINER  
7. 210-2542 [2] VALVE-INLET  
8. 316-5976 [4] SPRING (OUTER)  
9. 316-5977 [4] SPRING (INNER)  
10. 316-5978 [2] ROTOCOIL AS (INLET)  
11. 316-5979 [2] ROTOCOIL AS (EXHAUST)  
12. 316-5980 [2] SEAL-VALVE STEM  
13. 316-5981 [2] WASHER (17.8X44.5X3-MM THK)  
14. 8T-6759 [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540103
 

299-3521: CYLINDER HEAD GP

299-3521 CYLINDER HEAD GP
S/N 50Y647-1304
PART OF 357-0858 ENGINE AR-COMPLETE
i03482081 SEBP1554
2993521 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 420-0652 [4] SEAL AS-WATER  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 420-0653 [4] SEAL AS-WATER  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 110-6991 [1] GASKET-CYLINDER HEAD  
9. 335-6220 CY [1] CYLINDER HEAD GP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540104
 

317-2440: CYLINDER HEAD GP

317-2440 CYLINDER HEAD GP
S/N 50Y647-1304
PART OF 101-0830 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@335-6220@@@@@
i02906084 SEBP1554
3172440 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [4] LOCK-RETAINER  
2. 133-9306 [2] GUIDE-VALVE (STANDARD)(INLET)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)(INLET)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)(INLET)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)(INLET)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)(INLET)  
3. 154-1612 Y [1] CYLINDER HEAD AS  
4. 468-8825 [2] VALVE-EXHAUST  
5. 197-6995 [2] GUIDE-VALVE (STANDARD)(EXHAUST)  
  276-3875 AB GUIDE-VALVE (0.127-MM OS)(EXHAUST)  
  276-3876 AB GUIDE-VALVE (0.25-MM OS)(EXHAUST)  
  320-7710 AB GUIDE-VALVE (0.381-MM OS, EXHAUST)  
  320-7711 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
6. 197-7055 [4] LOCK-RETAINER  
7. 468-8824 [2] VALVE-INLET  
8. 316-5976 [4] SPRING (OUTER)  
9. 316-5977 [4] SPRING (INNER)  
10. 316-5978 [2] ROTOCOIL AS (INLET)  
11. 316-5979 [2] ROTOCOIL AS (EXHAUST)  
12. 316-5980 [2] SEAL-VALVE STEM  
13. 316-5981 [2] WASHER (17.8X44.5X3-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540105
 

335-6220: CYLINDER HEAD GP

335-6220 CYLINDER HEAD GP
S/N 50Y647-1304
PART OF 299-3521 CYLINDER HEAD GP, 350-2143, 357-1809 KIT-ENGINE CONVERSION
FIELD REPLACEMENT FOR @@@@@317-2440@@@@@
i03432503 SEBP1554
3356220 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [4] LOCK-RETAINER  
2. 133-9306 [2] GUIDE-VALVE (STANDARD)(INLET)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)(INLET)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)(INLET)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)(INLET)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)(INLET)  
3. 468-8825 [2] VALVE-EXHAUST  
4. 197-6995 [2] GUIDE-VALVE (STANDARD)(EXHAUST)  
  276-3875 AB GUIDE-VALVE (0.127-MM OS)(EXHAUST)  
  276-3876 AB GUIDE-VALVE (0.25-MM OS)(EXHAUST)  
  320-7710 AB GUIDE-VALVE (0.381-MM OS, EXHAUST)  
  320-7711 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
5. 197-7055 [4] LOCK-RETAINER  
6. 468-8824 [2] VALVE-INLET  
7. 290-1351 Y [1] CYLINDER HEAD AS  
8. 316-5976 [4] SPRING (OUTER)  
9. 316-5977 [4] SPRING (INNER)  
10. 316-5978 [2] ROTOCOIL AS (INLET)  
11. 316-5979 [2] ROTOCOIL AS (EXHAUST)  
12. 316-5980 [2] SEAL-VALVE STEM  
13. 316-5981 [2] WASHER (17.8X44.5X3-MM THK)  
   
  449-7113 BF [2] ROTOCOIL AS  
  449-7116 BF [2] SEAL-VALVE STEM  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540106
 

4W-0095: CYLINDER HEAD GP

4W-0095 CYLINDER HEAD GP
i00091549 SEBP1554
4W0095 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1961 C [8] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
2. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 9Y-0635 C [2] SPACER (19.35X30.18X45-MM THK)  
4. 4W-9560 Y [1] CYLINDER HEAD GP  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 110-6991 C [1] GASKET-CYLINDER HEAD  
8. 6I-1357 [4] SEAL  
9. 6I-1356 [4] SEAL  
10. 5B-7890 B [1] PLUG-PIPE  
11. 8T-6759 B [1] PLUG-PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540107
 

4W-9560: CYLINDER HEAD GP

4W-9560 CYLINDER HEAD GP
S/N 50Y647-872; 66Z190-377
PART OF 4W-0095 CYLINDER HEAD GP
i00109302 SEBP1554
4W9560 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [8] LOCK-RETAINER  
2. 7N-7964 [4] ROTOCOIL AS  
3. 7N-1903 [4] SPRING-VALVE INNER  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 2W-2662 [4] SEAT-SPRING  
6. 7W-1063 [1] CYLINDER HEAD AS  
7. 7N-1902 [2] DOWEL  
8. 9S-8002 [4] PLUG (7/16-20-THD)  
  3J-7354 [4] SEAL-O-RING  
9. 3B-0623 [5] PLUG-CUP  
10. 3B-0645 [5] PLUG-CUP  
11. 1W-1801 [4] INSERT-VALVE SEAT  
12. 7N-1819 [4] GUIDE-VALVE  
13. 4D-0514 C [4] PLUG-PIPE  
14. 7C-6217 [4] VALVE (INLET, EXHAUST)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15540108
 

4W-9560: CYLINDER HEAD GP

4W-9560 CYLINDER HEAD GP
S/N 50Y873-1304; 66Z378-578
PART OF 4W-0095 CYLINDER HEAD GP
i00091558 SEBP1554
4W9560 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [8] LOCK-RETAINER  
2. 4P-2521 [4] ROTOCOIL AS  
3. 7N-1903 [4] SPRING-VALVE INNER  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 2W-2662 [4] SEAT-SPRING  
6. 7E-5861 CY [1] CYLINDER HEAD AS  
7. 7N-1902 [1] DOWEL  
8. 130-2613 [4] GUIDE-VALVE  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)  
  166-5944 AB GUIDE-VALVE (0.127-MM OS)  
9. 7E-4609 [2] VALVE-INLET  
10. 121-9839 [2] VALVE-EXHAUST  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540109
 

7W-2233: CYLINDER HEAD GP

7W-2233 CYLINDER HEAD GP
S/N 50Y647-647; 66Z190-206
PART OF 7W-2234 CYLINDER HEAD GP
i00539979 SEBP1554
7W2233 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [8] LOCK-RETAINER  
2. 7N-7964 [4] ROTOCOIL AS  
3. 7N-1903 [4] SPRING-VALVE INNER  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 2W-2662 [4] SEAT-SPRING  
6. 7W-1063 [1] CYLINDER HEAD AS  
7. 7N-1902 [2] DOWEL  
8. 9S-8002 [4] PLUG (7/16-20-THD)  
8A. 3J-7354 [4] SEAL-O-RING  
9. 3B-0623 [7] PLUG-CUP  
10. 3B-0645 [5] PLUG-CUP  
11. 1W-1801 [4] INSERT-VALVE SEAT  
12. 7N-1819 [4] GUIDE-VALVE  
13. 4D-0514 [1] PLUG-PIPE  
14. 4W-1300 [4] VALVE-EXHAUST & INLET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
6V4008 Valve Seat Extractor Now Available
1980/12/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
The Oil Seals Have Been Removed From The Exhaust Valves {1100}
2000/12/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/10/01
Oversized Valve Guides are Available {1104}
2005/01/31
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
An Improved Outer Valve Spring is Used {1100, 1108}
2006/01/02
A New Cylinder Head Gasket is Used {1124}
2006/07/24
Use the Correct Parts in the Valve Train {1100}
2007/01/22
Improved Valve Components Are Used {1100, 1108}
2008/12/22
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2014/01/13
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/07/10
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Failure of Reused Rotocoils in 3500 Engines{1100}
Failure of Reused Rotocoils in 3500 Engines{1100}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Cylinder Head
3500 Marine Engines
Cylinder Head Valves
3500 Marine Engines
Cylinder Head
3500 Marine Engines
Cylinder Head Valves
3500 Marine Engines
Cylinder Head
3500 Marine Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Systems Operation
Cylinder Block, Liners and Heads
3500 Marine Engines
Valve System Components
3500 Marine Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
3500 Marine Engines
Valve Lash Check
3500 Marine Engines
Cylinder Heads
3500 Marine Engines
Disassembly and Assembly
Cylinder Head Assemblies
3508, 3512 & 3516 MARINE ENGINES
Valves
3508, 3512 & 3516 MARINE ENGINES
Bridge Dowels
3508, 3512 & 3516 MARINE ENGINES
Valve Seat Inserts
3508, 3512 & 3516 MARINE ENGINES
Valve Guides
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
6V4008 Valve Seat Extractor Now Available{1103,0622}
1980/11/24
6V4009 Dowel Driver Available {0622,1101}
1981/03/23
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Material Changed In Exhaust and Inlet Valves{1105}
1987/04/20
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
Silicone Water Seals Reinstated In Cylinder Heads{1115,1300}
1988/08/01
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/01/28
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Taller Water Seals Used In Cylinder Head Groups {1115}
1992/08/10
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit {1115}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3512 :

CYLINDER HEAD AS
7E-5859 CYLINDER HEAD AS
CYLINDER HEAD AS
299-3519 CYLINDER HEAD AS
CYLINDER HEAD AS
290-1351 CYLINDER HEAD AS
CYLINDER HEAD AS
154-1612 CYLINDER HEAD AS
CYLINDER HEAD AS
10R-2010 CYLINDER HEAD AS
CYLINDER BLOCK GP
7E-4664 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER HEAD GP
101-0830 CYLINDER HEAD GP
CYLINDER HEAD GP
10R-7765 CYLINDER HEAD GP
CYLINDER HEAD GP
299-3521 CYLINDER HEAD GP
CYLINDER HEAD GP
317-2440 CYLINDER HEAD GP
CYLINDER HEAD GP
335-6220 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.