AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-7205 CONTROL GP-AIR STARTING -RH MANUAL WITH OVERRIDE AN ATTACHMENT 3512 MARINE ENGINE


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

MARINE ENGINE 3512 MARINE ENGINE 50Y
 3512 Marine Engine 50Y00647-01304 SEBP1554 3512 50Y   (1980)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
CONTROL GP-AIR STARTING
106-8943 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7202 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7205 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7208 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7211 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8165 CONTROL GP-AIR STARTING
 

#SEBP15540870
 

4W-7205: CONTROL GP-AIR STARTING

4W-7205 CONTROL GP-AIR STARTING -RH
MANUAL WITH OVERRIDE
AN ATTACHMENT
i00380135 SEBP1554
4W7205 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5427 [1] PLATE  
2. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
5. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
6. 5N-8057 [1] TUBE AS  
7. 4W-7213 [1] TUBE AS  
8. 4W-7214 [1] TUBE AS  
9. 3J-7355 [6] UNION-FLARED  
10. 3B-6552 [1] ELBOW-PIPE  
11. 0S-1594 [4] BOLT (3/8-16X1-IN)  
12. 7B-2742 B [8] BOLT (1/4-20X1.25-IN)  
  1B-2713 B [8] BOLT (1/4-20X1.75-IN)  
13. 5P-0537 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 9S-8750 [8] NUT-FULL (1/4-20-THD)  
15. 8N-8472 [4] CLAMP-TUBE  
16. 8N-8470 [4] BRACKET  
17. 2W-1772 [1] TUBE AS  
18. 4W-5426 Y [1] VALVE GP-AIR CONTROL (ENGINE START)  
19. 4W-5424 Y [1] VALVE GP-AIR CONTROL (ENGINE)  
20. 2N-1287 [4] ELBOW-FLARED  
21. 4W-1704 Y [1] VALVE GP-DIVERTER  
22. 3B-7733 [1] FITTING  
23. 5N-8059 [1] TUBE AS  
24. 8N-8471 [1] CLAMP-TUBE  
25. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
  5P-9287 [1] WASHER-HARD (7.2X32X2-MM THK)  
26. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
  5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8N-2266 [1] BRACKET  
28. 5N-8060 [1] TUBE AS  
29. 8L-6557 [2] CONNECTOR  
30. 6V-1240 [1] TEE-PIPE  
31. 8N-5701 [3] TUBE AS  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540871
 

4W-7208: CONTROL GP-AIR STARTING

4W-7208 CONTROL GP-AIR STARTING -LH
MANUAL
AN ATTACHMENT
i00380140 SEBP1554
4W7208 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8060 [1] TUBE AS  
2. 5N-8059 [1] TUBE AS  
3. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
4. 5P-9287 [3] WASHER-HARD (7.2X32X2-MM THK)  
5. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
6. 8N-8471 [5] CLAMP-TUBE  
7. 8N-2266 [1] BRACKET  
8. 8N-5701 [2] TUBE AS  
9. 3J-7355 [6] UNION-FLARED  
10. 0T-0055 C [2] BOLT (3/8-16X4.25-IN)  
11. 8N-8472 C [11] CLAMP-TUBE  
12. 1W-8144 [1] TUBE AS  
13. 1W-8145 [1] TUBE AS  
14. 2A-5546 C [2] BOLT (1/4-20X1.375-IN)  
15. 067-6495 [2] ELBOW-FLARED  
16. 7B-2742 C [14] BOLT (1/4-20X1.25-IN)  
17. 8N-8470 C [4] BRACKET  
18. 0S-1594 C [3] BOLT (3/8-16X1-IN)  
19. 1W-8129 C [1] SUPPORT  
20. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
21. 9S-8750 [8] NUT-FULL (1/4-20-THD)  
22. 5P-0537 C [22] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
24. 4W-7216 [1] TUBE AS  
25. 4W-7217 [1] TUBE AS  
26. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 4W-7219 [1] TUBE AS  
28. 5N-8071 [1] PLATE  
29. 4W-7220 [1] TUBE AS  
30. 4W-5425 [1] PLATE  
31. 165-3929 [2] BOLT (3/8-16X1.5-IN)  
32. 4W-5424 Y [1] VALVE GP-AIR CONTROL  
33. 2N-1287 [3] ELBOW-FLARED  
34. 3B-6552 [1] ELBOW-PIPE  
35. 5M-2894 C [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540872
 

4W-7211: CONTROL GP-AIR STARTING

4W-7211 CONTROL GP-AIR STARTING -LH
MANUAL WITH OVERRIDE
AN ATTACHMENT
i00380146 SEBP1554
4W7211 CONTROL GP-AIR STARTING Parts scheme 4W7211 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8060 [1] TUBE AS  
2. 5N-8059 [1] TUBE AS  
3. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
4. 5P-9287 [3] WASHER-HARD (7.2X32X2-MM THK)  
5. 2H-3855 [1] BOLT (1/2-13X0.875-IN)  
  5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8N-8471 [5] CLAMP-TUBE  
7. 8N-2266 [1] BRACKET  
8. 8N-5701 [3] TUBE AS  
9. 3J-7355 [9] UNION-FLARED  
10. 7B-2742 C [16] BOLT (1/4-20X1.25-IN)  
11. 8N-8472 C [12] CLAMP-TUBE  
12. 1W-8144 [1] TUBE AS  
13. 1W-8145 [1] TUBE AS  
14. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
15. 067-6495 [3] ELBOW-FLARED  
16. 9S-8750 C [10] NUT-FULL (1/4-20-THD)  
17. 8N-8470 C [5] BRACKET  
18. 0S-1594 C [3] BOLT (3/8-16X1-IN)  
19. 1W-8143 [1] TUBE AS  
20. 2W-1772 [1] TUBE AS  
21. 2N-1287 [5] ELBOW-FLARED  
22. 4W-1704 Y [1] VALVE GP-DIVERTER  
23. 4W-7218 [1] TUBE AS  
24. 4W-7219 [1] TUBE AS  
25. 4W-7220 [1] TUBE AS  
26. 1W-8129 C [1] SUPPORT  
27. 0T-0055 C [2] BOLT (3/8-16X4.25-IN)  
28. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
29. 5M-2894 C [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
32. 5N-8071 [1] PLATE  
  1B-2714 [2] BOLT (1/4-20X2.5-IN)  
33. 4W-7216 [1] TUBE AS  
34. 4W-7217 [1] TUBE AS  
36. 4W-7215 [1] TUBE AS  
37. 6V-1240 [1] TEE-PIPE  
38. 3B-7733 [1] FITTING  
39. 4W-5427 [1] PLATE  
40. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 4W-5424 Y [1] VALVE GP-AIR CONTROL  
43. 3B-6552 [1] ELBOW-PIPE  
44. 8L-6557 [1] CONNECTOR  
45. 4W-5426 Y [1] VALVE GP-AIR CONTROL  
46. 5P-0537 C [26] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540873
 

5N-8165: CONTROL GP-AIR STARTING

5N-8165 CONTROL GP-AIR STARTING
115 VOLT AC
FOR USE WITH HYDR0-MECHANICAL SYSTEM & AIR START OR ELECTRIC ASSISTED AIR START
CANNOT BE USED WITH MANUAL AIR START CONTROL GPS OR MANUAL CONTROL GPS WITH OVERRIDE
AN ATTACHMENT
i00387688 SEBP1554
5N8165 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9587 [4] CONNECTOR  
2. 5P-5610 [4] CONNECTOR  
3. 5N-2746 [1] VALVE-SOLENOID  
4. 6K-1972 C [1] ELBOW-FLARED  
5. 3B-7275 [1] NIPPLE-PIPE  
6. 6N-3170 CI [1] HOSE AS  
7. 5N-6762 [1] SWITCH  
8. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
9. 9S-8752 C [2] NUT-FULL (3/8-16-THD)  
10. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 5N-8056 [1] PLATE  
13. 4B-1233 [2] SCREW (10-24X0.875-IN)  
  4B-2047 [2] NUT (10-24-THD)  
  3B-4502 [2] LOCKWASHER  
14. 1S-4435 [1] CONNECTOR (SEALTITE)  
15. 4W-1706 CY [1] VALVE GP-DIVERTER  
16. 5L-2579 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540874
 

5N-8166: CONTROL GP-AIR STARTING

5N-8166 CONTROL GP-AIR STARTING
24-VOLT TO 32-VOLT
Type 1
FOR USE WITH HYDROMECHANICAL SYSTEM AND AIR START OR ELECTRIC ASSISTED AIR START
CANNOT BE USED WITH MANUAL AIR START CONTROL OR MANUAL CONTROL WITH OVERRIDE
AN ATTACHMENT
i00387691 SEBP1554
5N8166 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-1972 C [2] ELBOW-FLARED  
2. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
3. 5N-8958 Y [1] SWITCH GP-START (START/BYPASS)  
4. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  1D-4717 [2] NUT (3/8-16-THD)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 5N-8056 [1] PLATE  
6. 4B-1233 [2] SCREW (10-24X0.875-IN)  
  4B-2047 [2] NUT (10-24-THD)  
  3B-4502 [2] LOCKWASHER  
7. 5H-7598 [1] NIPPLE-PIPE  
8. 2V-5956 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540875
 

5N-8166: CONTROL GP-AIR STARTING

5N-8166 CONTROL GP-AIR STARTING
24-VOLT TO 32-VOLT
Type 2
FOR USE WITH HYDROMECHANICAL SYSTEM AND AIR START OR ELECTRIC ASSISTED AIR START
CANNOT BE USED WITH MANUAL AIR START CONTROL OR MANUAL CONTROL WITH OVERRIDE
AN ATTACHMENT
i00387694 SEBP1554
5N8166 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-1972 C [2] ELBOW-FLARED  
2. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
3. 5N-8958 Y [1] SWITCH GP-START (START/BYPASS)  
4. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  1D-4717 [2] NUT (3/8-16-THD)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 5N-8056 [1] PLATE  
6. 4B-1233 [2] SCREW (10-24X0.875-IN)  
  4B-2047 [2] NUT (10-24-THD)  
  3B-4502 [2] LOCKWASHER  
7. 5H-7598 [1] NIPPLE-PIPE  
8. 2V-5956 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540876
 

5N-8166: CONTROL GP-AIR STARTING

5N-8166 CONTROL GP-AIR STARTING
24-VOLT TO 32-VOLT
Type 3
FOR USE WITH HYDROMECHANICAL SYSTEM AND AIR START OR ELECTRIC ASSISTED AIR START
CANNOT BE USED WITH MANUAL AIR START CONTROL OR MANUAL CONTROL WITH OVERRIDE
AN ATTACHMENT
i00387737 SEBP1554
5N8166 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-1972 C [2] ELBOW-FLARED  
2. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
3. 454-7489 Y [1] SWITCH AS-PUSH BUTTON (ENGINE START)  
4. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 454-4749 [1] PLATE  
6. 7D-5473 [4] BOLT-SOCKET HEAD (8-32X0.75-IN)  
  4B-2043 [4] NUT (8-32-THD)  
  3B-4501 [4] LOCKWASHER  
7. 5H-7598 [1] NIPPLE-PIPE  
8. 2V-5956 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540877
 

7C-0330: CONTROL GP-AIR STARTING

7C-0330 CONTROL GP-AIR STARTING
24/32-VOLT
Type 1
AN ATTACHMENT
i00397122 SEBP1554
7C0330 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
2. 5J-7303 [1] ELBOW  
3. 3B-7275 [1] NIPPLE-PIPE  
4. 3N-4579 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540878
 

7C-0330: CONTROL GP-AIR STARTING

7C-0330 CONTROL GP-AIR STARTING
24/32-VOLT
Type 2
AN ATTACHMENT
i00397129 SEBP1554
7C0330 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
2. 6K-1972 C [1] ELBOW-FLARED  
3. 5H-7598 [1] NIPPLE-PIPE  
4. 3N-4622 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15540879
 

7C-0330: CONTROL GP-AIR STARTING

7C-0330 CONTROL GP-AIR STARTING
24/32-VOLT
Type 3
AN ATTACHMENT
i00397137 SEBP1554
7C0330 CONTROL GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
2. 6K-1972 C [2] ELBOW-FLARED  
3. 5H-7598 [1] NIPPLE-PIPE  
4. 2V-5956 CI [1] HOSE AS  
5. 4M-5317 [1] BUSHING-REDUCER  
6. 5F-5434 [1] VALVE AS-VENT  
7. 030-7961 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Bearing Used In Air Starting Motor
1982/09/22
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
Improved Valve Used In Air Starting Lines Groups
1984/06/20
New Air Start And Override Valve Has Stronger Mounting
1984/06/20
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1984/12/12
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1985/02/01
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
New Starting Motors Used {1453}
2002/05/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
A New Starter Drive is Used on Air Starting Motors {1451}
2006/01/02
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3500 Marine Engines
Electric Starting Motor
3500 Marine Engines
Air Starting Motor
3500 Marine Engines
Air Starting Motor Pressure Regulating Valve
3500 Marine Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
3500 Marine Engines
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
Testing and Adjusting
Electric Starting System
3500 Marine Engines
Pinion Clearance Adjustment
3500 Marine Engines
General Information (Air/Electric Starting System)
3500 Marine Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Pressure Regulating Valve
3500 Marine Engines
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Oil Sump Pump (An Attachment)
3508, 3512 & 3516 MARINE ENGINES
Air Starter (An Attachment)
3508, 3512 & 3516 MARINE ENGINES
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Bearing Used In Air Starting Motor {1451}
1982/09/13
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
Improved Valve Used In Air Starting Lines Groups{1451}
1984/05/21
New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1984/12/10
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1985/02/11
New Seal Prevents Oil Leakage From Threads Of Magnetic Speed Pickups{7487,7462}
1986/06/09
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

Caterpillar Parts SIS Catalog 3512 :

CONTROL GP-AIR STARTING
4W-7202 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
106-8943 CONTROL GP-AIR STARTING
CONTROL AS-ELECTRONIC GOVERNOR
131-5454 CONTROL AS-ELECTRONIC GOVERNOR
CONTROL & MTG GP-ENGINE ELEK
231-7069 CONTROL & MTG GP-ENGINE ELEK
CONTROL & MTG GP-ENGINE ELEK
220-2677 CONTROL & MTG GP-ENGINE ELEK
CONTROL & MTG GP-ENGINE ELEK
121-3321 CONTROL & MTG GP-ENGINE ELEK
CONTACTOR-TEMPERATURE
7W-0705 CONTACTOR-TEMPERATURE
CONTACTOR-PRESSURE
4W-2646 CONTACTOR-PRESSURE
CONTROL GP-AIR STARTING
4W-7208 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
4W-7211 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8165 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
7C-0330 CONTROL GP-AIR STARTING
CONTROL GP-AIR STARTING
7C-0330 CONTROL GP-AIR STARTING

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.