HYDRAULIC SYSTEM
MOTOR GPPUMP GP
FRAME AND BODY
LINES GPHYDRAULIC SYSTEM
MOTOR GP#SEBP15610320
4T-3068: MOTOR GP-PISTON
4T3068 PISTON MOTOR GROUP-PART 1 OF 2
S/N 1FD1-239 & 7WC1-391
4T3056-PAGE 250
ALSO PART OF 6W9987 SWING LINES
S/N 1FD1-239 & 7WC1-391
4T3056-PAGE 250
ALSO PART OF 6W9987 SWING LINES
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-2695 | [6] | BOLT | |
| 2. | 9M-1974 | [6] | WASHER | |
| 3. | 4T-1579 | [1] | RETAINER | |
| 4. | 3G-3098 | [1] | BODY-LOWER | |
| 5. | 9S-9739 | [16] | BOLT 68.5MM(2.7 IN)LG | |
| 6. | 3G-5755 | [1] | PLATE AS-DRIVE | |
| 3G-3739 | [9] | INSERT-BEARING | ||
| 7. | 8J-6239 | [1] | LOCK-NUT | |
| 8. | 1U-2775 | [1] | BODY-UPPER | |
| 9. | 9S-8008 | [2] | PLUG-O-RING | |
| 3D-2824 | [2] | SEAL-O-RING | ||
| 10. | 4B-4158 | [4] | SCREW | |
| 11. | 8J-2559 | [1] | PLATE-CAUTION | |
| 12. | 4T-3061 | [1] | HEAD-MOTOR | |
| 13. | 8B-1312 | [2] | DOWEL | |
| 14. | 1B-9575 | [4] | BOLT | |
| 15. | 4T-3056 Y | [1] | VALVE GP-SHUTTLE | |
| 16. | 7F-8268 | [1] | SEAL-O-RING | |
| 17. | 9K-7290 | [4] | BOLT-12 POINT HEAD 82.55MM(3.25 IN)LG | |
| 18. | 3G-5940 | [1] | NUT | |
| 19. | 9J-0747 | [1] | BEARING AS | |
| 20. | 1H-5338 | [1] | CUP-ROLLER BEARING | |
| 2K-5097 | [1] | CONE-ROLLER BEARING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15610321
4T-3068: MOTOR GP-PISTON
4T3068 PISTON MOTOR GROUP-PART 2 OF 2
S/N 1FD1-239 & 7WC1-391
ALSO PART OF 6W9987 SWING LINES
S/N 1FD1-239 & 7WC1-391
ALSO PART OF 6W9987 SWING LINES
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-2676 | [1] | RETAINER | |
| 2. | 1U-1967 | [1] | BEARING-ROLLER | |
| 3. | 035-2297 | [1] | RING-RETAINING | |
| 4. | 4T-2625 | [1] | RETAINER | |
| 5. | 4T-2675 | [1] | RACE-THRUST | |
| 6. | 4T-3059 | [1] | SHAFT | |
| 7. | 5H-6005 | [2] | SEAL-O-RING | |
| 8. | 0S-1618 | [2] | BOLT | |
| 9. | 0S-1566 | [1] | BOLT | |
| 8J-6236 | [1] | LOCK | ||
| 10. | 4T-3066 | [1] | RETAINER | |
| 11. | 9J-5716 | [1] | TUBE | |
| 8J-0438 | [1] | SPRING | ||
| 12. | 9D-8042 | [1] | SEAL-O-RING | |
| 13. | 4T-3055 | [1] | SPRING | |
| 14. | 4T-2603 | [1] | BEARING-THRUST | |
| 15. | 4T-2674 | [1] | RACE-THRUST | |
| 16. | 1U-4805 R | [9] | PISTON AS | |
| (EACH INCLUDES) | ||||
| 17. | 8J-6276 | [1] | RETAINER | |
| 18. | 6J-7836 | [1] | RING-SNAP | |
| 19. | 9J-8051 | [1] | RETAINER | |
| 20. | 1U-1965 R | [1] | BARREL AS-CYLINDER | |
| 21. | 1J-2176 | [1] | SEAL-O-RING | |
| 22. | 8J-6273 | [9] | RING-RETAINING | |
| 23. | 3F-5792 | [1] | SEAL-O-RING | |
| 24. | 5H-3182 | [1] | PIN-SPRING | |
| 25. | 3G-4605 | [1] | UNIVERSAL JOINT AS | |
| 2R-1256 | [2] | RING-RETAINING | ||
| 26. | 8J-6277 B | [1] | SHIM 1.245MM(.049 IN)THK | |
| 8J-6278 B | [5] | SHIM .0762MM(.003 IN)THK | ||
| 8J-6279 B | [5] | SHIM .1270MM(.005 IN)THK | ||
| 27. | 8J-6242 | [1] | SEAL-LIP TYPE | |
| 28. | 4T-3064 | [1] | PLATE-PORT | |
| 29. | 7J-4169 | [1] | RING-SNAP | |
| 30. | 0S-0130 | [1] | PIN | |
| B | USE AS REQUIRED | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBP15610322
9T-1208: MOTOR GP-PISTON-LINK
9T1208 MOTOR GP-PISTON LINK-2 REQUIRED
S/N 7WC392-UP & 1FD240-UP
9T4328-PAGE 173.02
S/N 7WC392-UP & 1FD240-UP
9T4328-PAGE 173.02
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-4328 Y | [1] | ROTATING GP | |
| 2. | 9T-4298 | [1] | FLANGE | |
| 3. | 9T-4299 | [1] | HOUSING | |
| 4. | 9T-4300 | [1] | HEAD | |
| 5. | 8C-3059 | [1] | SEAL-O-RING | |
| 6. | 8C-3058 | [1] | SEAL-O-RING | |
| 7. | 8T-2503 M | [8] | BOLT-SOCKET HEAD | |
| 8. | 9T-4467 M | [8] | BOLT-HEX HEAD | |
| 9. | 8C-3112 | [1] | DOWEL | |
| 10. | 7M-8485 | [1] | SEAL-O-RING | |
| 11. | 9S-9334 | [1] | PLUG | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15610323
9T-4328: ROTATING GP
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-4285 | [1] | SHAFT | |
| 2. | 9T-4286 | [7] | PISTON | |
| 3. | 9T-4287 | [14] | RING | |
| 4. | 9T-4288 | [7] | BUSHING | |
| 5. | 9T-4289 | [1] | BARREL | |
| 6. | 9T-4290 | [1] | PLATE-PORT | |
| 7. | 9T-4291 | [1] | PIN | |
| 8. | 9T-4292 | [1] | PLATE-RETRACTION | |
| 9. | 9T-4293 | [1] | PLUG | |
| 10. | 9T-4294 | [1] | COVER | |
| 11. | 9T-4295 | [1] | PIN | |
| 12. | 9T-4296 | [1] | DISC | |
| 13. | 9T-4686 | [1] | SPRING | |
| 14. | 9T-4297 | [1] | SPACER | |
| 15. | 9T-4756 | [1] | BEARING AS-TAPERED ROLLER | |
| 16. | 9T-4757 | [1] | BEARING AS | |
| 17. | 9T-4505 | [1] | SEAL-LIP TYPE | |
| 18. | 8C-3057 | [1] | SEAL-O-RING | |
| 19. | 8C-3113 | [1] | RING-RETAINING | |
| 20. | 8C-3114 | [1] | RING-RETAINING | |
| 21. | 8T-7942 | [1] | DOWEL | |
| 22. | 9T-4497 B | [1] | SHIM | |
| 9T-4498 B | [1] | SHIM | ||
| 9T-4499 B | [2] | SHIM | ||
| 23. | 8T-1158 | [14] | BOLT-SOCKET HEAD | |
| B | USE AS REQUIRED | |||
#SEBP15610324
4T-2507: PUMP GP-PISTON
4T2507 PISTON PUMP GROUP-SLIPPER-PART 1 OF 2
8J6899-PAGE 176
8J6899-PAGE 176
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-9703 | [1] | PLATE | |
| 2. | 4B-4158 | [4] | SCREW | |
| 3. | 3P-1210 | [1] | CONE-ROLLER BEARING | |
| 4. | 2B-2006 | [4] | BOLT (1/2-13X4.75IN) | |
| 5. | 9M-1974 | [8] | WASHER | |
| 6. | 8J-6899 Y | [1] | HEAD GP-PUMP CONTROL | |
| 7. | 6E-1332 | [1] | PLATE | |
| 8. | 9T-6524 | [1] | GASKET | |
| 9. | 1B-2886 | [4] | BOLT (1/2-13X3.75IN) | |
| 10. | 034-4160 | [8] | BOLT-SELF LOCKING (5/16-18X1.0) | |
| 11. | 3G-5750 | [2] | BEARING-PLATE | |
| 12. | 8J-0218 B | [6] | SHIM (.127MM THK) | |
| 8J-0217 B | [4] | SHIM (.051MM THK) | ||
| 13. | 3G-4779 | [1] | PLATE-WEAR | |
| 14. | 6F-5282 | [2] | BOLT (1/2-13X5.25IN) | |
| 15. | 5B-5821 | [2] | PIN-DOWEL | |
| 16. | 1K-6985 | [1] | RING-RETAINING | |
| 17. | 4T-7023 | [1] | PLATE-RETRACTION | |
| 18. | 4T-3122 R | [9] | PISTON AS | |
| 19. | 8J-2043 | [1] | SPRING | |
| 20. | 9J-8667 R | [1] | BARREL AS | |
| 21. | 8J-0237 | [2] | SPACER-SPRING | |
| 22. | 5P-7213 C | [10] | WASHER-HARD | |
| 23. | 4T-9380 | [2] | INSERT | |
| 24. | 6E-2943 | [2] | PLUG | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15610325
4T-2507: PUMP GP-PISTON
4T2507 PISTON PUMP GROUP-SLIPPER-PART 2 OF 2
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1942 | [2] | LINK-PISTON | |
| 2. | 2J-0157 | [2] | SEAL-O-RING | |
| 3. | 6D-7889 | [2] | SEAL-O-RING | |
| 4. | 9J-7243 | [1] | BOLT-ANGLE STOP | |
| 5. | 3G-6019 | [1] | BOLT-ANGLE STOP | |
| 6. | 4T-1941 | [2] | INSERT-BEARING | |
| 7. | 8J-6276 | [2] | RETAINER | |
| 8. | 1S-8517 | [2] | RING-RETAINING | |
| 9. | 9S-8008 | [3] | PLUG-O-RING | |
| 3D-2824 | [3] | SEAL-O-RING | ||
| 10. | 9M-2092 | [2] | SEAL-O-RING | |
| 11. | 4T-2508 | [2] | COVER-TRUNNION | |
| 12. | 2D-9191 | [2] | CONE-ROLLER BEARING | |
| 13. | 0S-1588 | [14] | BOLT (3/8-16X1.25IN) | |
| 5M-2894 | [14] | WASHER | ||
| 14. | 8J-0220 B | [4] | SHIM (.127MM THK) | |
| 8J-0221 B | [4] | SHIM (.051MM THK) | ||
| 15. | 1U-1655 | [2] | SEAL-LIP TYPE | |
| 16. | 7H-2444 | [2] | SEAL | |
| 17. | 8J-6802 | [1] | SHAFT | |
| 18. | 7J-8893 | [1] | CONE-ROLLER BEARING | |
| 19. | 9J-6403 | [1] | RETAINER-SEAL | |
| 20. | 2D-9190 | [2] | CUP-ROLLER BEARING | |
| 21. | 5B-5821 | [1] | PIN-DOWEL | |
| 22. | 4T-2509 | [1] | SWASHPLATE | |
| 23. | 1T-0284 | [3] | BOLT-SOCKET HEAD | |
| 24. | 8J-0137 | [1] | BODY-PUMP | |
| 25. | 7J-8894 | [1] | CUP-ROLLER BEARING | |
| 26. | 1A-2223 | [2] | DOWEL | |
| 27. | 1D-5121 | [2] | NUT-JAM (7/8-14 THD) | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 8J-8652 | [1] | KIT-SEAL (INCLUDES GASKET, | ||
| RING & SEALS) | ||||
| B | USE AS REQUIRED | |||
#SEBP15610326
8J-6899: HEAD GP-PUMP CONTROL
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8002 | [5] | PLUG-O-RING | |
| 3J-7354 | [5] | SEAL-O-RING | ||
| 2. | 8J-0436 | [1] | HEAD-PUMP | |
| 3. | 8J-0442 | [1] | COVER | |
| 4. | 5K-5959 | [2] | SEAL-O-RING | |
| 5. | 8J-3800 | [1] | CARTRIDGE | |
| 6. | 8J-1898 B | [5] | SHIM | |
| 7. | 8J-6305 | [1] | SPRING (OUTER) | |
| 8. | 8J-3819 | [1] | SPRING (INNER) | |
| 9. | 0S-1595 C | [2] | BOLT | |
| 5P-7213 C | [2] | WASHER-HARD | ||
| 10. | 8J-2029 | [1] | SPACER | |
| 11. | 8J-0444 | [1] | COVER | |
| 12. | 8J-2028 | [1] | SPACER | |
| 13. | 5P-1480 | [6] | SEAL-O-RING | |
| 8J-3817 | [6] | RING-BACK-UP | ||
| 14. | 4T-1945 CY | [1] | VALVE GP-SERVO | |
| 15. | 8J-7334 | [1] | PISTON-ACTUATING | |
| 16. | 8J-3816 | [1] | PISTON AS | |
| 1U-4019 C | [1] | INSERT-BEARING | ||
| 17. | 8J-0412 | [1] | CUP-ROLLER BEARING | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15610327
4T-0380: PUMP GP-GEAR
4T0380 PUMP GP-GEAR
AN ATTACHMENT
AN ATTACHMENT
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-1269 C | [1] | GEAR-IDLER | |
| 2. | 6J-2386 C | [2] | DOWEL | |
| 3. | 4T-8729 C | [2] | PLATE-PRESSURE | |
| 5. | 4T-9298 C | [4] | BUSHING | |
| 6. | C | [1] | PLATE-ISOLATION | |
| 7. | 4T-9425 C | [1] | PLATE-ISOLATION | |
| 8. | 9T-1273 C | [1] | FLANGE AS-RH | |
| 9. | 0S-1595 | [8] | BOLT | |
| 6J-2391 | [8] | WASHER | ||
| 10. | 3G-5991 | [1] | COUPLING-SPLINE | |
| 11. | 5S-1522 | [2] | RING-SNAP | |
| 12. | 9T-1294 C | [1] | DRIVE SHAFT | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 3G-5990 | [1] | KIT-SEAL | ||
| (INCLUDES RETAINER, | ||||
| RING & SEAL) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP15610328
9T-5557: PUMP GP-GEAR
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-1270 | [1] | GEAR-IDLER | |
| 2. | 6J-2386 | [2] | DOWEL | |
| 3. | 4T-8729 | [2] | PLATE-PRESSURE | |
| 4. | 9T-5657 | [1] | BODY AS | |
| 5. | 4T-9298 | [4] | BUSHING | |
| 6. | [1] | PLATE-ISOLATION | ||
| 7. | 4T-9425 | [1] | PLATE-ISOLATION | |
| 8. | 9T-1273 | [1] | FLANGE AS-RH | |
| 9. | 0S-1595 | [8] | BOLT | |
| 6J-2391 | [8] | WASHER | ||
| 10. | 3G-5991 | [1] | COUPLING-SPLINE | |
| 11. | 5S-1522 | [2] | RING-SNAP | |
| 12. | 9T-5589 | [1] | DRIVE SHAFT | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 3G-5990 | [1] | KIT-SEAL | ||
| (INCL RINGS, SEALS & | ||||
| RETAINERS) | ||||
#SEBP15610329
8V-6613: LINES GP-GREASE
Parts for your 235B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-9406 | [1] | ELBOW-FLARED | |
| 2. | 2V-0654 | [1] | TUBE AS | |
| 3. | 8M-2772 | [10] | CLIP | |
| 4. | 0S-0509 | [8] | BOLT | |
| 5M-2894 C | [8] | WASHER | ||
| 5. | 3V-8820 | [1] | TUBE AS | |
| 6. | 5K-9979 | [3] | CONNECTOR-FLARED | |
| 7. | 6L-3616 | [4] | CONNECTOR-FLARED | |
| 8. | 8V-6596 | [1] | TUBE AS | |
| 9. | 6K-6967 | [1] | ADAPTER-PIPE | |
| 10. | 8K-4037 | [2] | HOSE AS | |
| 11. | 2V-0661 | [1] | HOSE AS | |
| 12. | 1A-1460 | [1] | BOLT | |
| 9F-8885 | [1] | SPACER | ||
| 5P-8245 C | [1] | WASHER | ||
| 13. | 3H-0120 | [1] | ELBOW | |
| 14. | 2V-0659 | [1] | TUBE AS | |
| 15. | 8V-6597 | [1] | TUBE AS | |
| 16. | 3V-8818 | [1] | TUBE AS | |
| 17. | 3V-8819 | [1] | TUBE AS | |
| 18. | 3B-8489 | [5] | FITTING-GREASE | |
| 19. | 5K-9242 | [3] | UNION-FLARED | |
| 20. | 7S-4244 | [1] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
HYDRAULIC SYSTEM
MOTOR GP
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Caterpillar Parts SIS Catalog 235B :
Truck sale:
CATERPILLAR 235B 1987
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan




