AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3516 Engine 3RC00001-UP FUEL SYSTEM Caterpillar SIS



GAS ENGINE G3516 GAS ENGINE 3RC
 G3516 Engine 3RC00001-UP SEBP1564 G3516 3RC   (1985)

Parts group G3516:

  For full view, you need register
FUEL SYSTEM
CARBURETOR GP
CARBURETOR AS
100-7478 CARBURETOR AS
100-7478 CARBURETOR AS
PART OF 4P-9091 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
106-6498 CARBURETOR GP
106-6498 CARBURETOR GP
S/N 3RC768-UP
PART OF 106-7946, 136-7411, 7E-8281 CARBURETOR GP
ALSO AN ATTACHMENT
CARBURETOR GP
106-7946 CARBURETOR GP
106-7946 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
136-7411 CARBURETOR GP
136-7411 CARBURETOR GP
HIGH BTU
FOR USE WITH DRY MANIFOLD
AN ATTACHMENT
CARBURETOR GP
4P-0664 CARBURETOR GP
4P-0664 CARBURETOR GP
PART OF 7E-8725 CONVERSION AR
AN ATTACHMENT
CARBURETOR GP
4P-9091 CARBURETOR GP
4P-9091 CARBURETOR GP
REQUIRES 4P-9088 AIR CLEANER, 4P-9090 REGULATOR AND 7E-9202 THROTTLE
AN ATTACHMENT
CARBURETOR GP
4W-9764 CARBURETOR GP
4W-9764 CARBURETOR GP
CARBURETOR GP
4W-9778 CARBURETOR GP
4W-9778 CARBURETOR GP
PART OF 4W-9764 CARBURETOR GP
CARBURETOR GP
6I-0773 CARBURETOR GP
6I-0773 CARBURETOR GP
S/N 3RC163-UP
FOR USE WITH @@@@@ 4P-9088@@@@@, @@@@@ 4P-9090@@@@@, @@@@@ 7E-9202@@@@@
AN ATTACHMENT
CARBURETOR GP
6I-2343 CARBURETOR GP
6I-2343 CARBURETOR GP
S/N 3RC163-UP
PART OF 6I-0773 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
7C-5781 CARBURETOR GP
7C-5781 CARBURETOR GP
S/N 3RC146-156
GAS ENGINE
CARBURETOR GP
7E-8281 CARBURETOR GP
7E-8281 CARBURETOR GP
S/N 3RC221-767
PART OF 7E-8725 CONVERSION AR
ALSO AN ATTACHMENT
CARBURETOR GP
7E-8281 CARBURETOR GP
7E-8281 CARBURETOR GP
S/N 3RC768-1203
CARBURETOR GP
7W-1356 CARBURETOR GP
7W-1356 CARBURETOR GP -LH GOVERNOR
NATURAL GAS
AN ATTACHMENT
CARBURETOR GP
9Y-3007 CARBURETOR GP
9Y-3007 CARBURETOR GP
S/N 3RC196-1254
CARBURETOR GP
9Y-3190 CARBURETOR GP
9Y-3190 CARBURETOR GP
S/N 3RC157-UP
CARBURETOR GP
9Y-3834 CARBURETOR GP
9Y-3834 CARBURETOR GP
S/N 3RC163-UP
PART OF 9Y-3190 CARBURETOR GP
CARBURETOR GP
9Y-4352 CARBURETOR GP
9Y-4352 CARBURETOR GP
S/N 3RC196-UP
PART OF 9Y-3007 CARBURETOR GP
CONTROL GP-CARBURETOR
2W-1438 CONTROL GP-CARBURETOR
2W-1438 CONTROL GP-CARBURETOR
CONTROL GP-CARBURETOR
4P-5250 CONTROL GP-CARBURETOR
4P-5250 CONTROL GP-CARBURETOR
S/N 3RC303-333
CONTROL GP-CARBURETOR
4P-5251 CONTROL GP-CARBURETOR
4P-5251 CONTROL GP-CARBURETOR
S/N 3RC163-UP
PART OF 9Y-6736 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
S/N 3RC334-1065
CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
S/N 3RC1066-UP
CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
S/N 3RC334-1065
CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
S/N 3RC1066-1076
CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
S/N 3RC1077-1254
CONTROL GP-CARBURETOR
4W-5567 CONTROL GP-CARBURETOR
4W-5567 CONTROL GP-CARBURETOR
FOR USE WITH LH GOVERNOR
AN ATTACHMENT
CONTROL GP-CARBURETOR
9Y-5897 CONTROL GP-CARBURETOR
9Y-5897 CONTROL GP-CARBURETOR
S/N 3RC163-UP
PART OF 9Y-6736 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
CONTROL GP-CARBURETOR
9Y-7260 CONTROL GP-CARBURETOR
9Y-7260 CONTROL GP-CARBURETOR
S/N 3RC146-333
124-6325 KIT-CARBURETOR BEARING
124-6325 KIT-CARBURETOR BEARING
FOR USE WITH ALL ENGINE ARRANGEMENTS
AN ATTACHMENT
CONTROL GP-FUEL
7E-8396 CONTROL GP-FUEL
7E-8396 CONTROL GP-FUEL -AUXILIARY
AN ATTACHMENT
CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
PART OF 102-0000 CONVERSION AR, 6I-4412 CONVERSION AR-ENGINE
FOR USE WITH CONVERSION FROM NATURAL GAS TO PROPANE
AN ATTACHMENT
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
PART OF 7E-3223 VALVE GP-SOLENOID
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
PART OF 100-7478 CARBURETOR AS, 6I-2343 CARBURETOR GP
AN ATTACHMENT
VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
S/N 3RC163-UP
PART OF 100-7478 CARBURETOR AS, 9Y-3834, 9Y-4352 CARBURETOR GP
ALSO AN ATTACHMENT
CONTROL GP-FUEL RATIO
REGULATOR AS-GAS PRESSURE
2W-7978 REGULATOR AS-GAS PRESSURE
2W-7978 REGULATOR AS-GAS PRESSURE
PART OF 4W-9939, 7C-9083 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
S/N 3RC219-UP
PART OF 7E-3404 REGULATOR GP-GAS PRESSURE
CONTROL GP-GOVERNOR
ACTUATOR AS
4P-7087 ACTUATOR AS
4P-7087 ACTUATOR AS
S/N 3RC221-UP
PART OF 9Y-6736, 9Y-7584 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
ACTUATOR AS-GOVERNOR
7W-1454 ACTUATOR AS-GOVERNOR
7W-1454 ACTUATOR AS-GOVERNOR
SAE STANDARD ROTATION
AN ATTACHMENT
ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
S/N 3RC146-327
PART OF 9Y-6736, 9Y-7584 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
1W-8887 ACTUATOR GP-GOVERNOR
1W-8887 ACTUATOR GP-GOVERNOR
BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
PART OF 4W-9314 GOVERNOR AS-ELECTRONIC
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5451 CONTROL AS-GOVERNOR
131-5451 CONTROL AS-GOVERNOR -SPEED CONTROL
S/N 3RC328-UP
PART OF 4P-6554 GOVERNOR AS-ELECTRONIC, 9Y-7584 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5452 CONTROL AS-GOVERNOR
131-5452 CONTROL AS-GOVERNOR -SPEED CONTROL
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5457 CONTROL AS-GOVERNOR
131-5457 CONTROL AS-GOVERNOR -SPEED CONTROL
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5567 CONTROL AS-GOVERNOR
131-5567 CONTROL AS-GOVERNOR -LOAD SHARE
AN ATTACHMENT
4P-6546 CONTROL AS-GOVERNOR
4P-6546 CONTROL AS-GOVERNOR
AN ATTACHMENT
CONTROL AS-GOVERNOR
7C-0246 CONTROL AS-GOVERNOR
7C-0246 CONTROL AS-GOVERNOR -LOAD SHARE
AN ATTACHMENT
CONTROL AS-GOVERNOR
7E-2583 CONTROL AS-GOVERNOR
7E-2583 CONTROL AS-GOVERNOR
LOAD SENSOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-0543 CONTROL GP-GOVERNOR
2W-0543 CONTROL GP-GOVERNOR -REMOTE
POSITIVE LOCK
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-0688 CONTROL GP-GOVERNOR
2W-0688 CONTROL GP-GOVERNOR
FOR USE WITH 3161 ISOCHRONOUS GOVERNORS
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
PART OF 143-6142, 2W-0280, 7C-3019, 7C-8082 GOVERNOR GP
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
POSITIVE LOCK & VERNIER
PART OF 4N-3831 CONTROL GP-GOVERNOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3831 CONTROL GP-GOVERNOR
4N-3831 CONTROL GP-GOVERNOR
VERNIER & POSITIVE LOCKING
AN ATTACHMENT
CONTROL GP-GOVERNOR
4P-5518 CONTROL GP-GOVERNOR
4P-5518 CONTROL GP-GOVERNOR -LOAD SHARE MODULE
AN ATTACHMENT
CONTROL GP-GOVERNOR
7C-3999 CONTROL GP-GOVERNOR
7C-3999 CONTROL GP-GOVERNOR
PART OF 7C-3020 GOVERNOR GP
AN ATTACHMENT
CONTROL GP-GOVERNOR
9Y-9857 CONTROL GP-GOVERNOR
9Y-9857 CONTROL GP-GOVERNOR
PART OF 7C-8083 GOVERNOR GP
AN ATTACHMENT
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
PART OF 7C-3299 SHUTOFF AR-ELECTRICAL
AN ATTACHMENT
FILTER GP-FUEL
4P-4716 FILTER GP-FUEL
4P-4716 FILTER GP-FUEL
FOR USE WITH GAS REGULATOR
AN ATTACHMENT
4P-4717 FILTER GP-FUEL
4P-4717 FILTER GP-FUEL
AN ATTACHMENT
4P-4718 FILTER GP-FUEL
4P-4718 FILTER GP-FUEL
AN ATTACHMENT
GOVERNOR GP
ACTUATOR AS-GOVERNOR
7W-1454 ACTUATOR AS-GOVERNOR
7W-1454 ACTUATOR AS-GOVERNOR
SAE STANDARD ROTATION
AN ATTACHMENT
ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
S/N 3RC146-327
PART OF 9Y-6736, 9Y-7584 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
1W-8887 ACTUATOR GP-GOVERNOR
1W-8887 ACTUATOR GP-GOVERNOR
COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
LIMITER & PNEUMATIC SPEED SETTING
PART OF 124-3172, 4W-7245, 7C-3020 GOVERNOR GP
FIELD REPLACEMENT ORDER @@@@@124-3172@@@@@
AN ATTACHMENT
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
PART OF 1W-8887 ACTUATOR GP-GOVERNOR, 4W-5561, 4W-5576, 4W-5643, 4W-5644 GOVERNOR GP
ALSO AN ATTACHMENT
DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
PART OF 4W-4942 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
DRIVE GP-GOVERNOR
9Y-5896 DRIVE GP-GOVERNOR
9Y-5896 DRIVE GP-GOVERNOR
S/N 3RC147-UP
PART OF 9Y-6736, 9Y-7584 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
FASTENER GP-GOVERNOR
7W-2896 FASTENER GP-GOVERNOR
7W-2896 FASTENER GP-GOVERNOR
PART OF 4W-4942 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
PART OF 2W-0280, 4W-7245, 4W-7246, 7C-3019, 7C-3020, 7C-3021 GOVERNOR GP
ALSO AN ATTACHMENT
FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
S/N 3RC97-138
PART OF 7C-3019, 7C-3020, 7C-3021 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
4P-2788 GOVERNOR AS-ELECTRONIC
4P-2788 GOVERNOR AS-ELECTRONIC
PART OF 4P-4898 PANEL AR-CONTROL
FOR USE WITH EMCP II CONTROL PANEL AND WOODWARD EG3P ACTUATOR
AN ATTACHMENT
4P-4897 GOVERNOR AS-ELECTRONIC
4P-4897 GOVERNOR AS-ELECTRONIC
PART OF 4P-4898 PANEL AR-CONTROL
FOR USE WITH SI PACKAGE GENSETS
AN ATTACHMENT
4P-4899 GOVERNOR AS-ELECTRONIC
4P-4899 GOVERNOR AS-ELECTRONIC
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
4P-6554 GOVERNOR AS-ELECTRONIC
4P-6554 GOVERNOR AS-ELECTRONIC
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
4W-9313 GOVERNOR AS-ELECTRONIC
4W-9313 GOVERNOR AS-ELECTRONIC
STANDBY
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
STANDBY WITH PREREGULATOR
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
AN ATTACHMENT
GOVERNOR GP
124-3172 GOVERNOR GP
124-3172 GOVERNOR GP
FIELD REPLACEMENT FOR @@@@@ 2W-0782@@@@@
GOVERNOR GP
143-6142 GOVERNOR GP
143-6142 GOVERNOR GP
PART OF 4W-5643 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
143-6143 GOVERNOR GP
143-6143 GOVERNOR GP
S/N 3RC1244-UP
PART OF 1W-8887 ACTUATOR GP-GOVERNOR
GOVERNOR GP
143-6144 GOVERNOR GP
143-6144 GOVERNOR GP
PART OF 4W-5644 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
2W-0280 GOVERNOR GP
2W-0280 GOVERNOR GP
PART OF 4W-5643 GOVERNOR GP
AN ATTACHMENT
4W-5561 GOVERNOR GP
4W-5561 GOVERNOR GP -LH
3161
FOR USE WITH LH CARBURETOR, CARBURETOR CONTROL & UPPER ACCESSORY DRIVE GPS
CANNOT BE USED WITH 7W-1530 HOUSING GP-FRONT
AN ATTACHMENT
4W-5576 GOVERNOR GP
4W-5576 GOVERNOR GP
3161 PNEUMATIC-LH
AN ATTACHMENT
4W-5643 GOVERNOR GP
4W-5643 GOVERNOR GP
3161 SYNCHRONIZED MOTOR-RH
AN ATTACHMENT
4W-5644 GOVERNOR GP
4W-5644 GOVERNOR GP
PNEUMATIC-RH
AN ATTACHMENT
GOVERNOR GP
4W-7245 GOVERNOR GP
4W-7245 GOVERNOR GP
PART OF 4W-5576, 4W-5644 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
4W-7246 GOVERNOR GP
4W-7246 GOVERNOR GP
S/N 3RC1-96
PART OF 1W-8887 ACTUATOR GP-GOVERNOR, 4W-5561 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7C-3019 GOVERNOR GP
7C-3019 GOVERNOR GP
WOODWARD 3161
PART OF 4W-5643 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
7C-3020 GOVERNOR GP
7C-3020 GOVERNOR GP
PART OF 4W-5576, 4W-5644 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
7C-3021 GOVERNOR GP
7C-3021 GOVERNOR GP
S/N 3RC97-138
WOODWARD 3161
PART OF 1W-8887 ACTUATOR GP-GOVERNOR, 4W-5561 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7C-8082 GOVERNOR GP
7C-8082 GOVERNOR GP
WOODWARD 3161
PART OF 4W-5643 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
7C-8083 GOVERNOR GP
7C-8083 GOVERNOR GP
WOODWARD 3161
PART OF 4W-5576, 4W-5644 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
7C-8084 GOVERNOR GP
7C-8084 GOVERNOR GP
S/N 3RC139-677
WOODWARD 3161
PART OF 1W-8887 ACTUATOR GP-GOVERNOR, 4W-5561 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7W-2895 GOVERNOR GP
7W-2895 GOVERNOR GP
PART OF 4W-4942 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
4W-4942 GOVERNOR GP-ELECTRONIC
4W-4942 GOVERNOR GP-ELECTRONIC
2301 WOODWARD
AN ATTACHMENT
GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
WITH PREREGULATOR
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
9Y-6736 GOVERNOR GP-ELECTRONIC
9Y-6736 GOVERNOR GP-ELECTRONIC
S/N 3RC163-UP
CANNOT BE USED WITH LANDFILL ENGINE ARS
AN ATTACHMENT
9Y-7584 GOVERNOR GP-ELECTRONIC
9Y-7584 GOVERNOR GP-ELECTRONIC
S/N 3RC146-1254
HOUSING GP-GOVERNOR
2W-1458 HOUSING GP-GOVERNOR
2W-1458 HOUSING GP-GOVERNOR
S/N 3RC1-677
PART OF 2W-0280, 4W-7245, 4W-7246, 7C-3019, 7C-3020, 7C-3021, 7C-8082, 7C-8083, 7C-8084 GOVERNOR GP
ALSO AN ATTACHMENT
236-7516 KIT-GOVERNOR SHAFT
236-7516 KIT-GOVERNOR SHAFT
STAINLESS STEEL SHAFT
FIELD INSTALLATION
PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
PART OF 124-3172 GOVERNOR GP
LINES GP-FUEL
CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
PART OF 102-0000 CONVERSION AR, 6I-4412 CONVERSION AR-ENGINE
FOR USE WITH CONVERSION FROM NATURAL GAS TO PROPANE
AN ATTACHMENT
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
FOR USE WITH 72-25 RADIATOR
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
Type 1
FOR USE WITH 60-13 RADIATOR
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
Type 2
FOR USE WITH 60-13 RADIATOR
AN ATTACHMENT
COOLER GP-FUEL
7E-8090 COOLER GP-FUEL
7E-8090 COOLER GP-FUEL
FOR USE WITH 50-11 RADIATOR
AN ATTACHMENT
LINES GP-GAS
7E-8191 LINES GP-GAS
7E-8191 LINES GP-GAS
S/N 3RC221-1203
PUMP GP-GEROTOR
PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
PART OF 124-3172 GOVERNOR GP
REGULATOR GP-GAS PRESSURE
REGULATOR AS-GAS PRESSURE
2W-7978 REGULATOR AS-GAS PRESSURE
2W-7978 REGULATOR AS-GAS PRESSURE
PART OF 4W-9939, 7C-9083 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
S/N 3RC219-UP
PART OF 7E-3404 REGULATOR GP-GAS PRESSURE
REGULATOR GP-GAS PRESSURE
100-8227 REGULATOR GP-GAS PRESSURE
100-8227 REGULATOR GP-GAS PRESSURE
S/N 3RC598-UP
PART OF 2W-5710, 4P-9090 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
2W-5710 REGULATOR GP-GAS PRESSURE
2W-5710 REGULATOR GP-GAS PRESSURE
S/N 3RC146-597
LANDFILL
REGULATOR GP-GAS PRESSURE
2W-5710 REGULATOR GP-GAS PRESSURE
2W-5710 REGULATOR GP-GAS PRESSURE
S/N 3RC598-1254
LANDFILL
REGULATOR GP-GAS PRESSURE
4P-9090 REGULATOR GP-GAS PRESSURE
4P-9090 REGULATOR GP-GAS PRESSURE
S/N 3RC163-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
4P-9090 REGULATOR GP-GAS PRESSURE
4P-9090 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
4W-9939 REGULATOR GP-GAS PRESSURE
4W-9939 REGULATOR GP-GAS PRESSURE
S/N 3RC1-218
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
7C-5001 REGULATOR GP-GAS PRESSURE
7C-5001 REGULATOR GP-GAS PRESSURE
S/N 3RC146-597
PART OF 2W-5710 REGULATOR GP-GAS PRESSURE
REGULATOR GP-GAS PRESSURE
7C-9083 REGULATOR GP-GAS PRESSURE
7C-9083 REGULATOR GP-GAS PRESSURE
S/N 3RC196-1254
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
7C-9083 REGULATOR GP-GAS PRESSURE
7C-9083 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
7E-3404 REGULATOR GP-GAS PRESSURE
7E-3404 REGULATOR GP-GAS PRESSURE
S/N 3RC219-UP
REGULATOR GP-GAS PRESSURE
7E-8190 REGULATOR GP-GAS PRESSURE
7E-8190 REGULATOR GP-GAS PRESSURE
S/N 3RC221-1203
SHUTOFF GP
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
PART OF 7E-3223 VALVE GP-SOLENOID
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
THROTTLE GP
THROTTLE GP
241-6968 THROTTLE GP
241-6968 THROTTLE GP
PART OF 7E-9202 THROTTLE GP
AN ATTACHMENT
THROTTLE GP
7E-1586 THROTTLE GP
7E-1586 THROTTLE GP
S/N 3RC163-UP
PART OF 9Y-3834, 9Y-4352 CARBURETOR GP
THROTTLE GP
7E-9201 THROTTLE GP
7E-9201 THROTTLE GP
S/N 3RC221-UP
PART OF 7E-9202 THROTTLE GP
ALSO AN ATTACHMENT
THROTTLE GP
7E-9202 THROTTLE GP
7E-9202 THROTTLE GP
S/N 3RC221-1203
ALSO AN ATTACHMENT
THROTTLE GP
7E-9202 THROTTLE GP
7E-9202 THROTTLE GP
AN ATTACHMENT
VALVE GP
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
PART OF 7E-3223 VALVE GP-SOLENOID
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP-CONTROL
VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
PART OF 100-7478 CARBURETOR AS, 6I-2343 CARBURETOR GP
AN ATTACHMENT
VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
S/N 3RC163-UP
PART OF 100-7478 CARBURETOR AS, 9Y-3834, 9Y-4352 CARBURETOR GP
ALSO AN ATTACHMENT
VALVE GP-SOLENOID
VALVE GP-SOLENOID
4P-9596 VALVE GP-SOLENOID
4P-9596 VALVE GP-SOLENOID -GAS SHUTOFF
S/N 3RC163-UP
Type 2
FOR USE WITH @@@@@ 4P-9090@@@@@
AN ATTACHMENT
COOLER GP
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
FOR USE WITH 72-25 RADIATOR
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
Type 1
FOR USE WITH 60-13 RADIATOR
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
Type 2
FOR USE WITH 60-13 RADIATOR
AN ATTACHMENT
COOLER GP-FUEL
7E-8090 COOLER GP-FUEL
7E-8090 COOLER GP-FUEL
FOR USE WITH 50-11 RADIATOR
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
New Carburetor Control Linkage Improves Idle Stability
1991/04/01
Carburetor Linkage Change For Engines
1993/08/01
Carburetor Control Linkage (EG3P Governor)
1993/12/01
New Components In Carburetor Control Groups Makes Adjustments Easier {1266}
1995/04/01
New 124-6325 Bearing Kit Available For Carburetor Service{1266}
1995/09/01
New Mixer Assembly Provides Better Startability And Idle Stability {1266}
1996/09/23
Addition Of Sleeve And Removal Of Setscrew Prevents Binding Of Control Shaft {1266,7558}
1996/09/23
Washers Available Within The Conversion Group (Landfill Carburetor) For Spacing Of Valves{1283,7553}
1997/10/10
Be Sure To Use Correct Valve When Replacing The Mixer Assembly In Carburetor Group {1266}
1997/12/16
New Rods Ends Used In Carburetor Control Groups{1265,1266}
1998/05/01
Conversion Group Components Changed To Allow 400 To 450 BTU Fuel Usage{1266}
1998/05/01
Be Sure To Order The Correct Diaphragm For Servicing The Mixer Of The Carburetor {1266}
2002/03/01
New Parts Are Available for the Throttle {1266, 1269}
2003/12/01
Shims Are Now Used in the Carburetors of G3516 Engines {1266}
2009/02/02
Specifications
Carburetor Control Linkage
3500 NATURAL GAS ENGINES
Disassembly and Assembly
Carburetor
3500 NATURAL GAS ENGINES
Carburetor
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
New Carburetor Control Leakage Improves Idle Stability{1266}
1991/04/08
Adjustment Of 60670 Idle Air Lines Group (Idle Bleed Circuit){1266}
1993/04/12
Carburetor Linkage Change To Improve Rod Alignment{1266}
1993/08/30
Carburetor Control Linkage (EG3P Governor) {1265}
1993/12/20
Engine News
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Conversion Gas Valve Kits Available{1278}
1996/10/01
Service Magazine
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
New Throttle Actuator In Governor Groups Improves Engine Stability
1991/08/01
Governor Control Adjustment
1993/04/01
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Reference For Springs For The Pneumatic Speed Control Setting On Woodward 3161 Governors {1915}
2001/07/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Special Instruction
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Carburetor Control Linkage - 3161 Governor
3500 Spark Ignited Engines
Carburetor Control Linkage - EG3P Governor
3500 Spark Ignited Engines
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Throttle Actuator In Governor Groups Improves Engine Stability {1289}
1991/07/22
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Governor Control Adjustment {1264}
1993/05/03
Carburetor Control Linkage (EG3P Governor) {1265}
1993/12/20
Specifications
Tachometer Drive
3500 SPARK IGNITED ENGINE ATTACHMENTS
Disassembly and Assembly
Tachometer Drive
3500 NATURAL GAS ENGINES
Tachometer Drive
3512 & 3516 SPARK IGNITED ENGINES
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/03/01
New Oil Filter Shield And Shield Mounting Screws Used In Oil Filter Base Assemblies {1306}
1995/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Fuel Filter Differential Pressure - Check
G3500 Engines
Special Instruction
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/01/28
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/11/01
Special Instruction
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor
1986/06/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New Throttle Actuator In Governor Groups Improves Engine Stability
1991/08/01
Governor Control Adjustment
1993/04/01
Governor Change Prevents Leakage At Drive Base
1993/08/01
Carburetor Control Linkage (EG3P Governor)
1993/12/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Service Instructions For 7C-3018 Governor Orifice {1264}
1998/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Operation and Maintenance Manual
Governors and Actuators
G3500 Engines
Actuator Control Linkage - Lubricate
G3500 Engines
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Governor Drive
3500 NATURAL GAS ENGINES
Governor Fastener Group
3500 SPARK IGNITED ENGINE ATTACHMENTS
Governor Drive
3500 Spark Ignited Engines
Governor Drive
3500 Spark Ignited Engines
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Systems Operation
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Testing &amp; Adjusting
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Disassembly and Assembly
Governor
3500 NATURAL GAS ENGINES
Governor Drive
3500 NATURAL GAS ENGINES
Governor
3512 & 3516 SPARK IGNITED ENGINES
Governor Drive
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}
1986/05/26
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01{1289}
1991/04/22
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
New Throttle Actuator In Governor Groups Improves Engine Stability {1289}
1991/07/22
Governor Control Adjustment {1264}
1993/05/03
Governor Change Prevents Leakage At Drive Base{1264}
1993/08/23
Carburetor Control Linkage (EG3P Governor) {1265}
1993/12/20
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Service Magazine
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/03/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Conversion Gas Valve Kits Available{1278}
1996/10/01
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
Service Letter-Americas
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/11/01
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Use Oxygen Meter To Adjust Low Emission Engines
1986/07/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/03/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Carburetor Control Linkage Improves Idle Stability
1991/04/01
Governor Control Adjustment
1993/04/01
Carburetor Control Linkage (EG3P Governor)
1993/12/01
Gas Engine Fuel Specifications {1280}
1998/01/20
Operation and Maintenance Manual
Cold Weather Operation
SR500 Generators
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 4C8753 Extended Collet{1250}
Use of 4C8753 Extended Collet{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Specifications
Governor Drive
3500 NATURAL GAS ENGINES
Regulator For Gas Pressure<BR> (2W7978)
3500 NATURAL GAS ENGINES
Carburetor Control Linkage
3500 NATURAL GAS ENGINES
Governor Fastener Group
3500 SPARK IGNITED ENGINE ATTACHMENTS
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}
1986/05/26
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Water Regulator Prevents Leakage{1355,1393}
1990/06/25
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/01/28
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01{1289}
1991/04/22
Adjustment Of 60670 Idle Air Lines Group (Idle Bleed Circuit){1266}
1993/04/12
Governor Change Prevents Leakage At Drive Base{1264}
1993/08/23
Carburetor Linkage Change To Improve Rod Alignment{1266}
1993/08/30
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Service Magazine
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Service Magazine
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Governor
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Improved Fuel Priming Pump Used{1258}
1987/04/20
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Engine News
New Check Valve Available{1063,1355}
1994/04/18
New Water And Oil Temperature Regulators Available{1330,1355}
1994/12/01
Serviceable Parts Available for Sprague Gas Pressure Regulator Assembly{1270}
1995/09/01
New O-Ring Seal Used In Landfill Regulator Groups {1270}
1997/12/16
Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}
1999/02/01
Changes To High Pressure Gas Regulator Assembly Provide Improved Response{1270,1283}
1999/05/01
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Operation and Maintenance Manual
Gas Pressure Regulator Condensation - Drain
G3500 Engines
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
Specifications
Regulator For Gas Pressure<BR> (2W7978)
3500 NATURAL GAS ENGINES
Gas Pressure Regulator
3500 Spark Ignited Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Gas Pressure Regulator
3500 NATURAL GAS ENGINES
Gas Pressure Regulator Solenoid
3512 & 3516 SPARK IGNITED ENGINES
Gas Pressure Regulator
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
New Water Regulator Prevents Leakage{1355,1393}
1990/06/25
Check Valves Require Periodic Maintenance {1355,1063}
1993/09/13
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
New Solenoid Valve Group (Gas Shutoff) Provides Improved Reliability {1704}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Emergency Stopping
G3500 Engines
Manual Stop Procedure
G3500 Engines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
Engine News
New Throttle Actuator In Governor Groups Improves Engine Stability
1991/08/01
New Parts Are Available for the Throttle {1266, 1269}
2003/12/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Service Magazine
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
New Throttle Actuator In Governor Groups Improves Engine Stability {1289}
1991/07/22
Carburetor Control Linkage (EG3P Governor) {1265}
1993/12/20
Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Use Oxygen Meter To Adjust Low Emission Engines{0781,0782,1050}
1986/06/23
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Gas Regulator Setting Tool Group Available {0782}
1987/07/20
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
4C8753 Extended Collet Available; Problems With 8T1002 Probe For Fuel Setting{0782}
1991/01/14
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.