AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-8248 CYLINDER BLOCK GP S/N 3RC182-826 G3516 GAS ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GAS ENGINE G3516 GAS ENGINE 3RC
 G3516 Engine 3RC00001-UP SEBP1564 G3516 3RC   (1985)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7264 CYLINDER BLOCK GP
 

#SEBP15640050
 

2W-8248: CYLINDER BLOCK GP

2W-8248 CYLINDER BLOCK GP
S/N 3RC182-826
i00110224 SEBP1564
2W8248 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-4937 CY [1] CYLINDER BLOCK AS  
2. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
3. 9S-4191 B [1] PLUG (9/16-18-THD)  
4. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 1B-2790 [16] BOLT (5/16-18X1.375-IN)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 B [3] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 C [3] SEAL-O-RING  
13. 9Y-4121 C [16] JET AS-PISTON COOLING  
    (EACH INCLUDES)
  [1] JET AS-PISTON COOLING  
  4D-0514 [1] PLUG-PIPE  
14. 0T-0102 [16] BOLT (3/8-16X0.625-IN)  
15. 7N-2048 [18] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [28] PLUG-PIPE (1/4-18-THD)  
18. 1W-4188 [16] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  8N-9943 [1] RETAINER  
  6V-3537 [1] DOWEL  
19. 8T-0099 [32] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 7N-2049 [16] DOWEL  
22. 5P-0840 C [32] SEAL-O-RING  
23. 100-7886 [16] GASKET-PLATE  
24. 9Y-1485 [16] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 C [2] SEAL-O-RING  
27. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
28. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8N-8056 [2] COVER  
30. 6V-3348 [8] SEAL-O-RING  
31. 9S-4191 [5] PLUG (9/16-18-THD)  
32. 4W-4814 C [2] ADAPTER  
33. 8T-2928 C [2] SEAL-O-RING  
34. 8T-2929 C [2] SEAL-O-RING  
35. 033-6042 [5] SEAL-O-RING  
36. 033-6042 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640051
 

2W-8249: CYLINDER BLOCK GP

2W-8249 CYLINDER BLOCK GP
S/N 3RC1-111
Type 1
FIELD REPLACEMENT FOR @@@@@ 2W-8247@@@@@
FIELD INSTALLATION
i00360756 SEBP1564
2W8249 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 5M-6213 B [6] PLUG-PIPE (1/4-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
  6V-3348 [8] SEAL-O-RING  
8. 1W-5420 [2] ADAPTER  
9. 8N-8216 [9] CAP-CRANKSHAFT BEARING  
10. 5P-8288 [36] BOLT (3/4-16X11-IN)  
  5P-8248 [36] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 7N-2042 [6] PLUG  
12. 8S-0768 [8] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP15640052
 

2W-8249: CYLINDER BLOCK GP

2W-8249 CYLINDER BLOCK GP
S/N 3RC1-111
Type 2
FIELD REPLACEMENT FOR @@@@@ 2W-8247@@@@@
FIELD INSTALLATION
i00110225 SEBP1564
2W8249 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 5M-6213 B [6] PLUG-PIPE (1/4-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
  6V-3348 [8] SEAL-O-RING  
8. 4W-4814 C [2] ADAPTER  
9. 8N-8216 [9] CAP-CRANKSHAFT BEARING  
10. 5P-8288 [36] BOLT (3/4-16X11-IN)  
  5P-8248 [36] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 4W-4813 C [2] PLUG  
12. 8T-2929 [4] SEAL-O-RING  
13. 8T-2928 C [4] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15640053
 

4P-7264: CYLINDER BLOCK GP

4P-7264 CYLINDER BLOCK GP
S/N 3RC182-826
FIELD REPLACEMENT FOR @@@@@ 7E-4937@@@@@
FIELD INSTALLATION
i00091539 SEBP1564
4P7264 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 9S-4191 [6] PLUG (9/16-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 033-6042 [6] SEAL-O-RING  
 

#SEBP15640054
 

4P-8349: CYLINDER BLOCK GP

4P-8349 CYLINDER BLOCK GP
S/N 3RC675-1071
i00371579 SEBP1564
4P8349 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1228 Y [1] CYLINDER BLOCK AS  
2. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
3. 9S-4191 [6] PLUG (9/16-18-THD)  
4. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 1B-2790 [16] BOLT (5/16-18X1.375-IN)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 9Y-4121 [16] JET AS-PISTON COOLING  
    (EACH INCLUDES)
  [1] JET AS-PISTON COOLING  
  4D-0514 [1] PLUG-PIPE  
14. 0T-0102 [16] BOLT (3/8-16X0.625-IN)  
15. 7N-2048 [18] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [26] PLUG-PIPE (1/4-18-THD)  
18. 1W-4188 [16] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  8N-9943 [1] RETAINER  
  6V-3537 [1] DOWEL  
19. 8T-0099 [32] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 7N-2049 [16] DOWEL  
22. 5P-0840 [32] SEAL-O-RING  
23. 110-6992 [16] GASKET-PLATE  
24. 110-6994 [16] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [2] SEAL-O-RING  
27. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
28. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8N-8056 [2] COVER  
30. 6V-3348 [8] SEAL-O-RING  
31. 8T-2928 [2] SEAL-O-RING  
32. 8T-2929 [2] SEAL-O-RING  
33. 033-6042 [6] SEAL-O-RING  
34. 4W-4813 [2] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640055
 

7C-7754: CYLINDER BLOCK GP

7C-7754 CYLINDER BLOCK GP
S/N 3RC112-147
FIELD REPLACEMENT FOR @@@@@ 9Y-9369@@@@@
FIELD INSTALLATION
i00110381 SEBP1564
7C7754 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 5M-6213 [6] PLUG-PIPE (1/4-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 4W-4814 [2] ADAPTER  
10. 9Y-9175 C [9] CAP-CRANKSHAFT BEARING  
11. 7X-7925 C [36] BOLT (7/8-14X11-IN)  
  5P-8249 C [36] WASHER-HARD (24X41.5X4-MM THK)  
12. 4W-4813 [2] PLUG  
13. 8T-2929 [4] SEAL-O-RING  
14. 8T-2928 [4] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15640056
 

7C-7754: CYLINDER BLOCK GP

7C-7754 CYLINDER BLOCK GP
S/N 3RC148-181
FIELD REPLACEMENT FOR @@@@@ 9Y-9369@@@@@
FIELD INSTALLATION
i00110382 SEBP1564
7C7754 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 5M-6213 [6] PLUG-PIPE (1/4-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 4W-4814 [2] ADAPTER  
10. 9Y-9175 C [9] CAP-CRANKSHAFT BEARING  
11. 7X-7925 C [36] BOLT (7/8-14X11-IN)  
  5P-8249 C [36] WASHER-HARD (24X41.5X4-MM THK)  
12. 4W-4813 [2] PLUG  
13. 8T-2929 [4] SEAL-O-RING  
14. 8T-2928 [4] SEAL-O-RING  
    (FOR REPAIR OF CRACKED CYLINDER BLOCK)
  7E-2865 AY [1] KIT-INSERT (CYLINDER BLOCK)(DEEP CRACKS)  
  7W-5949 A [1] INSERT-LINER SEAT (SHALLOW CRACKS)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640057
 

7E-4668: CYLINDER BLOCK GP

7E-4668 CYLINDER BLOCK GP
S/N 3RC182-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4937@@@@@
FIELD INSTALLATION
i00091633 SEBP1564
7E4668 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 9S-4191 [6] PLUG (9/16-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 8T-2928 [2] SEAL-O-RING  
10. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
11. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
12. 4W-4813 [2] PLUG  
13. 8T-2929 [2] SEAL-O-RING  
14. 033-6042 [6] SEAL-O-RING  
    FOR REPAIR OF CRACKED CYLINDER BLOCKS:
  7E-2865 Y [1] KIT-INSERT (CYLINDER BLOCK)(DEEP CRACKS)  
  7W-5949 Y [1] INSERT-LINER SEAT (SHALLOW CRACKS)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640058
 

122-8851: CYLINDER HEAD AS

122-8851 CYLINDER HEAD AS
S/N 3RC1068-1092; 3RC1103-UP
PART OF 123-6072 CYLINDER HEAD AS, 123-8650 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER 123-6072 CYLINDER HEAD AS
i00512878 SEBP1564
1228851 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6883 [2] GUIDE-VALVE  
2. 4P-6571 Y [1] CYLINDER HEAD AS  
3. 9Y-6882 [2] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640059
 

123-6072: CYLINDER HEAD AS

123-6072 CYLINDER HEAD AS
S/N 3RC1068-1092; 3RC1103-UP
FIELD REPLACEMENT FOR 122-8851 CYLINDER HEAD AS
FIELD INSTALLATION
i00514824 SEBP1564
1236072 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-8851 Y [1] CYLINDER HEAD AS  
2. 7N-1902 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/12/01
Checking Or Adjusting Valve Clearances
1986/01/01
Cylinder Liner Seat Insert Available
1986/05/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Wider Main Bearing Cap And Higher Torque On Cap Bolts
1988/08/01
New Piston Cooling Jets Used
1988/09/01
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used
1989/04/01
New Viton Rubber Seals Used
1989/07/01
Stronger Spacer Plate Prevents Cracking
1989/08/01
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert
1991/08/01
New Cylinder Block And Crankshaft Used
1991/09/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Main Bearings Have Higher Fatigue Strength
1993/09/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
"Narrow Flange" Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of "Wide Flange" Cylinder Liners {1221}
1995/05/01
Information For Ordering Replacement Cylinder Block For Engine{1201}
1995/06/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Self-Locking Bolt Used On Cylinder Block Cover Groups{7553}
1997/09/15
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2013/09/12
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/09/14
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/09/19
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Operation and Maintenance Manual
Cylinder Pressure - Measure/Record
G3500 Engines
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Service Letter-Australia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Service Letter-CFEL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Service Letter-CSARL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Service Letter-Americas
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Service Letter-Truck/Ag/Marine
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Oil Cooler Bypass And Cooling Jet Sequence Valves
3500 NATURAL GAS ENGINES
Cylinder Block
3500 NATURAL GAS ENGINES
Cylinder Liners
3500 NATURAL GAS ENGINES
Cylinder Liner Projection
3500 NATURAL GAS ENGINES
Connecting Rod And Main Bearing Journals
3500 NATURAL GAS ENGINES
Cylinder Liner
3500 Spark Ignited Engines
Cylinder Block
3500 Spark Ignited Engines
Connecting Rod
3500 Spark Ignited Engines
Piston and Rings
3500 Spark Ignited Engines
Service Letter-China
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Service Letter-Asia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Disassembly and Assembly
Spacer Plates
3500 NATURAL GAS ENGINES
Crankshaft Main Bearings
3500 NATURAL GAS ENGINES
Piston Cooling Jets
3500 NATURAL GAS ENGINES
Cylinder Liners
3500 NATURAL GAS ENGINES
Camshaft Bearings
3500 NATURAL GAS ENGINES
Spacer Plates
3512 & 3516 SPARK IGNITED ENGINES
Crankcase Main Bearings
3512 & 3516 SPARK IGNITED ENGINES
Piston Cooling Jets
3512 & 3516 SPARK IGNITED ENGINES
Cylinder Liners
3512 & 3516 SPARK IGNITED ENGINES
Camshaft Bearings
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
Correct Installation Of Oil Sequence Valves{1304}
1985/04/22
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Wider Main Bearing Cap And Higher Torque On Cap Bolts{1201}
1988/08/15
New Piston Cooling Jets Used{1331,1200}
1988/09/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10
Stronger Spacer Plate Prevents Cracking{1221,1350}
1989/07/24
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Cylinder Blocks And Crankshafts Used{1201,1202,1231}
1991/03/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
1991/07/22
New Cylinder Block And Crankshaft Used{1201,1202,1231}
1991/09/16
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05

Caterpillar Parts SIS Catalog G3516 :

CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8247 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8247 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5160 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5159 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-1245 CYLINDER BLOCK GP
CYLINDER BLOCK AS
9Y-9369 CYLINDER BLOCK AS
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7264 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-8349 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-7754 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-7754 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4668 CYLINDER BLOCK GP
CYLINDER HEAD AS
122-8851 CYLINDER HEAD AS

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.