AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-1175 CYLINDER HEAD GP S/N 3RC79-UP G3516 GAS ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

GAS ENGINE G3516 GAS ENGINE 3RC
 G3516 Engine 3RC00001-UP SEBP1564 G3516 3RC   (1985)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8362 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1175 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1175 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1202 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-3218 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-6879 CYLINDER HEAD GP
 

#SEBP15640080
 

4W-1175: CYLINDER HEAD GP

4W-1175 CYLINDER HEAD GP
S/N 3RC79-UP
i00378582 SEBP1564
4W1175 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1961 C [8] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
2. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 9Y-0635 C [2] SPACER (19.35X30.18X45-MM THK)  
4. 7C-3218 Y [1] CYLINDER HEAD GP  
5. 0L-2070 C [2] BOLT (3/8-16X2.25-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 110-6991 [1] GASKET-CYLINDER HEAD  
8. 126-1112 [4] SEAL  
9. 126-1113 [4] SEAL  
10. 5B-7890 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640081
 

4W-1202: CYLINDER HEAD GP

4W-1202 CYLINDER HEAD GP
S/N 3RC1-78
PART OF 4W-1175 CYLINDER HEAD GP
i00378591 SEBP1564
4W1202 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9485 C [1] CYLINDER HEAD AS  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 2W-2662 [4] SEAT-SPRING  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 7N-7964 [4] ROTOCOIL AS  
6. 2A-4429 [8] LOCK-RETAINER  
7. 7C-0572 C [4] VALVE-EXHAUST & INLET  
8. 7N-1902 [2] DOWEL  
9. 7N-1819 C [2] GUIDE-VALVE (INTAKE)  
10. 7W-9487 C [2] GUIDE-VALVE (EXHAUST)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15640082
 

7C-3218: CYLINDER HEAD GP

7C-3218 CYLINDER HEAD GP
S/N 3RC79-563
PART OF 4W-1175 CYLINDER HEAD GP
i00404739 SEBP1564
7C3218 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-3471 Y [1] CYLINDER HEAD AS  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 2W-2662 [4] SEAT-SPRING  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 4P-2521 [4] ROTOCOIL AS  
6. 2A-4429 [8] LOCK-RETAINER  
7. 7E-4610 [4] VALVE-EXHAUST & INLET  
8. 7N-1902 [2] DOWEL  
9. 9Y-1847 [2] GUIDE-VALVE  
10. 9Y-1846 [2] GUIDE-VALVE (EXHAUST)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640083
 

9Y-6879: CYLINDER HEAD GP

9Y-6879 CYLINDER HEAD GP
S/N 3RC146-563
i00445701 SEBP1564
9Y6879 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1961 [8] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
2. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 9Y-0635 [2] SPACER (19.35X30.18X45-MM THK)  
4. 9Y-6880 Y [1] CYLINDER HEAD GP  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7W-7730 [1] GASKET-CYLINDER HEAD  
8. 6I-1357 [4] SEAL  
9. 6I-1356 [4] SEAL  
10. 5B-7890 [1] PLUG-PIPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640084
 

9Y-6880: CYLINDER HEAD GP

9Y-6880 CYLINDER HEAD GP
S/N 3RC146-563
PART OF 9Y-6879 CYLINDER HEAD GP
i00445705 SEBP1564
9Y6880 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6881 Y [1] CYLINDER HEAD AS  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 2W-2662 [4] SEAT-SPRING  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 7N-7964 [4] ROTOCOIL AS  
6. 2A-4429 [8] LOCK-RETAINER  
7. 9Y-6899 [4] VALVE-EXHAUST & INLET  
8. 7N-1902 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640085
 

100-4325: DAMPER GP

100-4325 DAMPER GP
PART OF 7E-9483 DAMPER GP
AN ATTACHMENT
i00460213 SEBP1564
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6I-3699 Y [1] DAMPER GP  
    -OR-
  7C-9639 Y [1] DAMPER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640086
 

171-4571: DAMPER GP

171-4571 DAMPER GP
PART OF 7E-9483 DAMPER GP
AN ATTACHMENT
i01102983 SEBP1564
1714571 DAMPER GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-9263 [2] WASHER (10.35X16X2-MM THK)  
2. 227-3801 [2] PLUG  
3. 1A-2029 [48] BOLT (3/8-16X1.125-IN)  
4. 3V-2431 [48] WASHER (10.2X16X2-MM THK)  
5. 4D-0449 [1] SEAL-O-RING  
6. 6V-7991 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  420-8780 [1] KIT-DAMPER  
    (INCLUDES SCREWS, WASHERS, PLUGS, SEALS, BEARING ELEMENTS & SEALING WASHERS)
  420-8781 [1] KIT-DAMPER  
    (INCLUDES WASHERS & PLUGS)
  437-9760 [1] KIT-DAMPER  
    (INCLUDES CARTRIDGE FILLED WITH SILICONE FLUID)
  441-4878 [1] KIT-DAMPER  
    (INCLUDES EMPTY CARTRIDGE)
 

#SEBP15640087
 

6I-3699: DAMPER GP

6I-3699 DAMPER GP
PART OF 100-4325 DAMPER GP
FIELD REPLACEMENT ORDER @@@@@171-4571@@@@@
AN ATTACHMENT
i00397591 SEBP1564
6I3699 DAMPER GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CASE-DAMPER  
2. 4D-0449 [1] SEAL-O-RING  
3. 7C-9688 [1] BEARING-RADIAL  
4. 9W-7783 [1] PLUG  
5. 1A-2029 [48] BOLT (3/8-16X1.125-IN)  
  3V-2431 [48] WASHER (10.2X16X2-MM THK)  
6. 7C-9689 [2] BEARING-THRUST  
7. 6V-7991 [1] SEAL-O-RING  
 

#SEBP15640088
 

7C-9639: DAMPER GP

7C-9639 DAMPER GP
PART OF 100-4325 DAMPER GP
FIELD REPLACEMENT ORDER @@@@@171-4571@@@@@
AN ATTACHMENT
i00394812 SEBP1564
7C9639 DAMPER GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
3. 1A-2029 [48] BOLT (3/8-16X1.125-IN)  
4. 3V-2431 [48] WASHER (10.2X16X2-MM THK)  
5. 9F-2247 [2] PLUG-PIPE  
6. 6V-7991 [1] SEAL-O-RING  
7. 4D-0449 [1] SEAL-O-RING  
8. 7N-2043 [2] DOWEL  
10. 9X-7258 [1] WASHER-PLASTIC (4.9X11.13X0.74-MM THK)  
11. 9M-0387 [1] SEAT-VALVE SPRING  
12. 7C-9689 [2] BEARING-THRUST  
13. 7C-9688 [1] BEARING-RADIAL  
14. 9X-6260 [1] RIVET-POP  
 

#SEBP15640089
 

7E-9483: DAMPER GP

7E-9483 DAMPER GP
Type 1
AN ATTACHMENT
i00391560 SEBP1564
7E9483 DAMPER GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4325 Y [1] DAMPER GP  
2. 7C-5265 [1] DAMPER AS  
3. 4P-0264 [1] ADAPTER AS  
  7N-2043 [2] DOWEL  
4. 7B-3235 [10] BOLT (1/2-13X1.375-IN)  
5. 2M-0849 [10] WASHER-HARD (13.5X25.5X5-MM THK)  
6. 8T-9378 [18] BOLT (3/8-16X4-IN)  
7. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 8S-4757 [6] BOLT (1-14X8-IN)  
9. 5P-8250 [6] WASHER (28X49X5-MM THK)  
10. 1N-3482 [1] ADAPTER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Checking Or Adjusting Valve Clearances
1986/01/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Extension Assembly Used In Gas Engine Ignition Groups
1989/06/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Cylinder Head Group Available For Landfill Applications
1990/09/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Assembly Provides Improved Valve Seat Retention
1993/06/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New Cylinder Head Gasket Used
1993/09/01
New Inlet/Exhaust Valve Has A Chrome Stem
1993/12/01
Oversize Valve Guides And Valve Seats Available{1103,1104}
1994/02/01
New 9U-7511 Spark Plug Seat Cleaner And 9U-7516 Spark Plug Gauge Available{1555,1100}
1994/05/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Three Piece Water Line Assembly Used Between Cylinder Head And Exhaust Manifold{1380}
1994/11/01
Additional Groove On Valve Stem Helps Identify 20° Valves {1105}
1995/04/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Spark Plug Seat Cleaner Recommended For Use On Cylinder Heads{1555}
1997/10/10
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Debris Shield Is Added To Cylinder Head Gasket Kits{1124}
1998/04/01
Use The Correct Procedure For Installation Of Cylinder Head Bolts {1100,7553}
1998/07/01
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
The New 155-1536 Valve Recession Tool Kit Has Been Released {0701,1105}
1998/11/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Valve Stem Seal Is Used In The Cylinder Head Groups For All Landfill Applications: New Valve Guides Are Used In All Cylinder Head Groups: Reference Tables Identify Cylinder Head Components For G3500 Series Engines {1104}
2001/01/01
New Valve Guides Are Used {1104}
2001/05/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Cylinder Head Gasket is Used {1124}
2006/07/24
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2013/12/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/05/01
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3500 Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Australia
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CFEL
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CSARL
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Americas
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Brazil
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Service Letter-Truck/Ag/Marine
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Hazardous Materials In Engine Combustion Chamber Deposits
Hazardous Materials In Engine Combustion Chamber Deposits
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Valves
3500 NATURAL GAS ENGINES
Cylinder Heads
3500 NATURAL GAS ENGINES
Cylinder Head
3500 Spark Ignited Engines
Cylinder Head Valves
3500 Spark Ignited Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Asia
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Disassembly and Assembly
Cylinder Head Assemblies
3500 NATURAL GAS ENGINES
Valves
3500 NATURAL GAS ENGINES
Bridge Dowels
3500 NATURAL GAS ENGINES
Valve Seat Inserts
3500 NATURAL GAS ENGINES
Valve Guides
3500 NATURAL GAS ENGINES
Cylinder Head Assemblies
3512 & 3516 SPARK IGNITED ENGINES
Valves
3512 & 3516 SPARK IGNITED ENGINES
Bridge Dowels
3512 & 3516 SPARK IGNITED ENGINES
Valve Seat Inserts
3512 & 3516 SPARK IGNITED ENGINES
Valve Guides
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
Silicone Water Seals Reinstated In Cylinder Heads{1115,1300}
1988/08/01
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Extension Assembly Used In Gas Engine Ignition Groups {1558}
1989/05/29
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Cylinder Head Group Available For Landfill Applications {1100,1104,1105}
1990/09/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/01/28
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Taller Water Seals Used In Cylinder Head Groups {1115}
1992/08/10
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit {1115}
1993/02/15
New Cylinder Head Assembly Provides Improved Valve Seat Retention{1100,1103}
1993/06/21
New Cylinder Head Gasket Used{1124}
1993/09/20
New Inlet/Exhaust Valve Has A Chrome Stem {1105}
1993/12/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23

Caterpillar Parts SIS Catalog G3516 :

CYLINDER HEAD GP
4W-1175 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8362 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8361 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8361 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6570 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6569 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6569 CYLINDER HEAD GP
CYLINDER HEAD GP
123-8650 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1202 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-3218 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-6879 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-6880 CYLINDER HEAD GP
100-4325 DAMPER GP
DAMPER GP
171-4571 DAMPER GP
DAMPER GP
6I-3699 DAMPER GP
DAMPER GP
7C-9639 DAMPER GP

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.