AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-3570 CARTRIDGE GP-TURBOCHARGER S/N 3RC221-886 PART OF 7W-3484 TURBOCHARGER GP G3516 GAS ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
AFTERCOOLER GP
LINES GP-EXHAUST

GAS ENGINE G3516 GAS ENGINE 3RC
 G3516 Engine 3RC00001-UP SEBP1564 G3516 3RC   (1985)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7C-3824 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7C-4018 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7W-3570 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9N-6300 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9Y-7014 CARTRIDGE GP-TURBOCHARGER
465-0995 KIT-TURBOCHARGER GASKET
 

#SEBP15640490
 

7W-3570: CARTRIDGE GP-TURBOCHARGER

7W-3570 CARTRIDGE GP-TURBOCHARGER
S/N 3RC221-886
PART OF 7W-3484 TURBOCHARGER GP
i00432181 SEBP1564
7W3570 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3411 J [1] LOCKNUT-TURBOCHARGER (7/16-20-THD)  
2. 1N-3505 [1] SPACER-THRUST  
3. 9M-8919 J [2] RING-SEAL  
4. 7W-2300 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [1] STUD-DRIVE  
5. 1N-3557 J [1] RING-SEAL  
6. 4W-1224 [1] HOUSING AS-BEARING  
  4M-6646 [2] PIN-GROOVED  
7. 4W-1222 J [1] RING-PISTON  
8. 4W-1329 [1] SHROUD  
9. 4W-1223 [1] SHAFT AS-TURBINE  
10. 9Y-1493 [1] WHEEL-COMPRESSOR  
11. 1N-3712 J [1] BEARING-THRUST  
12. 1N-3365 [1] COLLAR-THRUST  
13. 2J-3118 C [4] BOLT-LOCKING (3/8-16X1.25-IN)  
14. 5P-7234 J [3] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  1N-3593 [1] KIT-BEARING (STANDARD)  
  7W-4874 CJ [1] KIT-CARTRIDGE (TURBOCHARGER)  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP15640491
 

9N-6300: CARTRIDGE GP-TURBOCHARGER

9N-6300 CARTRIDGE GP-TURBOCHARGER
S/N 3RC163-UP
PART OF 4P-3571 TURBOCHARGER GP
AN ATTACHMENT
i00438877 SEBP1564
9N6300 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1936 [1] SHROUD  
2. 7N-3759 J [1] RING-PISTON  
3. 6N-5004 J [1] BEARING-THRUST  
4. 9M-8911 [1] COLLAR-THRUST  
5. 9M-8919 J [2] RING-SEAL  
6. 9M-8915 J [3] RING-RETAINING  
7. 0S-1616 [4] BOLT (1/4-20X1-IN)  
8. 6N-7962 [1] PLATE AS-BACKING  
8A. 7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
9. 1P-1120 J [1] RING-SEAL  
10. 4P-3429 [1] WHEEL-COMPRESSOR  
11. 9N-2046 [1] SPACER-THRUST  
12. 1S-1770 J [1] LOCKNUT-TURBOCHARGER  
13. 9N-2036 J [4] PLATE-LOCK  
14. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 [1] RING-SEAL  
15. 6N-4606 [1] WHEEL & SHAFT AS  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
  2W-0715 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP15640492
 

9Y-7014: CARTRIDGE GP-TURBOCHARGER

9Y-7014 CARTRIDGE GP-TURBOCHARGER
S/N 3RC146-1221
PART OF 9Y-1037 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00445785 SEBP1564
9Y7014 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4020 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 1N-3751 [1] SHROUD  
6. 9N-2043 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 9Y-7011 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
 

#SEBP15640493
 

7C-1193: CONTROL GP-AIR TEMPERATURE

7C-1193 CONTROL GP-AIR TEMPERATURE -AFTERCOOLER
PART OF 7C-6462 CONTROL GP-AIR TEMPERATURE
FOR USE WITH AIR TO AIR AFTERCOOLING
AN ATTACHMENT
i00616977 SEBP1564
7C1193 CONTROL GP-AIR TEMPERATURE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-4761 [2] VALVE  
2. 139-4762 [1] LINKAGE AS  
3. 139-4763 [1] TEE  
4. 139-4764 [1] ACTUATOR  
5. 139-4765 [1] POSITIONER  
6. 139-4766 [1] CONTROLLER  
7. 139-4767 [1] FILTER (AIR)  
8. 139-4768 [1] REGULATOR-PRESSURE (AIR)  
9. 139-4769 [1] VALVE  
 

#SEBP15640494
 

7C-6462: CONTROL GP-AIR TEMPERATURE

7C-6462 CONTROL GP-AIR TEMPERATURE -AFTERCOOLER
FOR USE WITH AIR TO AIR AFTERCOOLING
AN ATTACHMENT
i00409275 SEBP1564
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7C-1193 Y [1] CONTROL GP-AIR TEMPERATURE  
  5N-3727 [1] VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15640495
 

8N-8487: ELBOW GP-EXHAUST

8N-8487 ELBOW GP-EXHAUST
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
i00415396 SEBP1564
8N8487 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
2. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
4. 6N-4857 [1] FITTING  
5. 8N-8447 [1] ELBOW  
6. 8N-8452 [1] GASKET  
7. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
 

#SEBP15640496
 

5L-6954: ELBOW-EXHAUST

5L-6954 ELBOW-EXHAUST
12-IN
AN ATTACHMENT
i00925588 SEBP1564
5L6954 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP15640497
 

5L-7520: ELBOW-EXHAUST

5L-7520 ELBOW-EXHAUST
8-IN
AN ATTACHMENT
i00767214 SEBP1564
5L7520 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP15640498
 

5N-2458: ELBOW-EXHAUST

5N-2458 ELBOW-EXHAUST
10-IN
AN ATTACHMENT
i00553561 SEBP1564
5N2458 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP15640499
 

8L-9859: ELBOW-EXHAUST

8L-9859 ELBOW-EXHAUST
152.4-MM (6-INCH) PIPE
AN ATTACHMENT
i01373048 SEBP1564
8L9859 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
New Turbocharger Group Includes New Basic Turbocharger Group That Provides Increased Service Life {1052}
1995/03/01
New Vent Lines Groups Prevent Air From Being Trapped Inside Water Cooled Turbocharger Housings {1380}
1995/03/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Replacement Turbocharger Cartridge Part Numbers {1056}
1996/09/23
Turbocharger Vent Lines Important For Engine Reliability {1380}
1998/09/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Two Strainers are Available to Protect the Bearings in Turbochargers {1052}
2003/01/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Special Instructions Are Available for Retrofitting the Low Emission Kits on Certain G3516 1400 RPM Engines {775E}
2014/03/07
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
2014/09/12
Accurate Diagnosis of Turbocharger Failure on Certain G3500 Engines {1052}
2014/12/24
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
G3500 Engines
Special Instruction
Installation of 9Y1669 Turbo Kit{1052}
Installation of 9Y1669 Turbo Kit{1052}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Retrofitting for Low Emissions on Certain G3516 1400 RPM Engines {775E}
Retrofitting for Low Emissions on Certain G3516 1400 RPM Engines {775E}
Specifications
Turbocharger Installation<BR> (TW61, TW78, TW81)
3500 NATURAL GAS ENGINES
Turbocharger Impeller Installation
3500 NATURAL GAS ENGINES
Turbocharger TW61
3500 NATURAL GAS ENGINES
Turbocharger TW78 &amp; TW81
3500 NATURAL GAS ENGINES
Turbocharger
3500 Spark Ignited Engines
Turbocharger
3500 Spark Ignited Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers
3500 NATURAL GAS ENGINES
Exhaust Elbow
3512 & 3516 SPARK IGNITED ENGINES
Turbochargers
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Exhaust Manifolds And Wastegate Mounting Used On 3508 (2JF), 3512 (4KC), 3516 (3RC) SI Industrial Engines {1059,1057,1065}
1991/08/26
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog G3516 :

CARTRIDGE GP-TURBOCHARGER
7C-4018 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7C-3824 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7C-2860 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
109-3856 CARTRIDGE GP-TURBOCHARGER
107-8702 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
105-4588 CARTRIDGE GP-TURBOCHARGER
100-4095 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9N-6300 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9Y-7014 CARTRIDGE GP-TURBOCHARGER
CONTROL GP-AIR TEMPERATURE
7C-1193 CONTROL GP-AIR TEMPERATURE
7C-6462 CONTROL GP-AIR TEMPERATURE
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
ELBOW-EXHAUST
5L-6954 ELBOW-EXHAUST
ELBOW-EXHAUST
5L-7520 ELBOW-EXHAUST
ELBOW-EXHAUST
5N-2458 ELBOW-EXHAUST

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.