ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSWITCH GP
STARTING AID GP
BASIC ENGINE
PULLEY GPPOWER TRAIN
TRANSMISSION GPTORQUE CONVERTER GP
FILTER GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP15690100
7X-1361: STARTING MOTOR GP-ELECTRIC
7X1361 STARTING MOTOR GP-ELECTRIC
12 VOLT-S/N 7BC1314-UP
MOUNTING HARDWARE IS USED: 3-1B4203 NUT & 3-5M2894 WASHER
12 VOLT-S/N 7BC1314-UP
MOUNTING HARDWARE IS USED: 3-1B4203 NUT & 3-5M2894 WASHER
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0856 | [1] | COIL AS | |
| 2. | 9W-0859 | [1] | ARMATURE AS | |
| 3. | 9W-0861 | [1] | COVER AS | |
| 4. | 8T-4133 M | [2] | NUT | |
| 5. | 8T-4121 | [2] | WASHER | |
| 6. | 9W-0845 | [1] | HOLDER AS-BRUSH | |
| 7. | 8C-3652 | [1] | HOUSING AS-DRIVE | |
| 8. | 9W-0862 | [1] | LEVER AS-FORK | |
| 9. | 9W-0850 | [1] | DRIVE AS-CLUTCH | |
| 10. | 9W-0848 | [1] | BEARING AS | |
| 11. | 9W-0853 | [1] | COVER | |
| 12. | 9W-0860 | [4] | SPRING | |
| 13. | 9W-0854 | [1] | CLAMP | |
| 6V-8816 M | [1] | SCREW-MACHINE | ||
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 9W-0855 | [1] | KIT-BRUSH | ||
| 9W-1950 | [1] | KIT-BUSHING | ||
| 9W-0843 | [1] | KIT-ARMATURE (INCLUDES | ||
| RETAINER, RING, SEAL, | ||||
| WASHERS AND SHIMS) | ||||
| 9W-1952 | [1] | KIT-HARDWARE | ||
| (INCLUDES SCREWS, NUTS, | ||||
| STUD AND WASHERS) | ||||
| 7X-1590 | [1] | KIT-SOLENOID | ||
| (INCLUDES SPACER, SCREW, | ||||
| AND SOLENOID AS) | ||||
| M | METRIC PART | |||
#SEBP15690101
7N-8001: SWITCH AS-TOGGLE
7N8001 SWITCH AS-TOGGLE
PART OF 9R0674 STARTING AID
PART OF 9R0674 STARTING AID
#SEBP15690102
9R-0674: STARTING AID GP-ETHER
9R0674 AID GP-ETHER STARTING
7N8001-PAGE 69.02
7N8001-PAGE 69.02
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-1693 | [1] | SWITCH AS | |
| 2. | 9B-7233 | [2] | LOCKWASHER | |
| 3. | 6V-8376 | [2] | SCREW-MACHINE (8-32X.25IN) | |
| 4. | 7N-8001 Y | [1] | SWITCH AS-TOGGLE | |
| 5. | 3B-7255 | [1] | BUSHING | |
| 6. | 5C-7261 M | [2] | NUT (M8X1.25 THD) | |
| 7. | 7T-7624 | [1] | NOZZLE | |
| 8. | 5P-5630 CBD | TUBE | ||
| 9. | 9R-3511 | [1] | PLATE AS | |
| 10. | 7N-2059 | [1] | CLAMP AS-CYLINDER | |
| 11. | 8T-4224 | [4] | WASHER-HARD (2MM THK) | |
| 12. | 8T-4189 M | [4] | BOLT (M8X1.25X20MM) | |
| 13. | 3K-6675 C | [1] | FITTING | |
| 14. | 2V-1713 | [1] | TAG | |
| 15. | 6V-2686 C | [1] | CLIP | |
| 16. | 3T-9493 | [1] | VALVE AS (FLOW CONTROL) | |
| 17. | 7N-9801 | [1] | GASKET | |
| 18. | 7N-9737 | [1] | HOUSING-PLUG | |
| 7N-7779 | [1] | SOCKET | ||
| 7N-7780 | [1] | PIN-CONNECTOR | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15690103
2W-9774: ALTERNATOR GP-CHARGING
2W9774 ALTERNATOR GP-CHARGING
7T2876-PAGE 72
7T2876-PAGE 72
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-0815 | [1] | SPACER | |
| 2. | 8T-4121 | [11] | WASHER | |
| 3. | 4L-6496 | [1] | BOLT | |
| 4. | 2S-9506 | [1] | V-BELT | |
| 5. | 7W-0826 | [1] | STRAP | |
| 6. | 4L-9337 | [1] | BOLT | |
| 7. | 7W-0809 | [1] | PLATE | |
| 8. | 7T-2876 Y | [1] | ALTERNATOR GP-CHARGING | |
| 9. | 8L-7395 | [4] | NUT-FULL | |
| 10. | 7W-0807 | [1] | ANGLE | |
| 11. | 9H-2374 | [1] | BOLT | |
| 12. | 7W-0811 | [1] | SUPPORT-ALTERNATOR | |
| 13. | 8T-2502 | [2] | BOLT | |
| 14. | 8T-8889 C | [4] | BOLT | |
| 15. | 7W-9094 | [1] | SPACER | |
| 16. | 7W-0810 | [1] | WIRE AS | |
| 17. | 5P-1075 | [4] | WASHER-HARD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15690104
7T-2876: ALTERNATOR GP-CHARGING
7T2876 ALTERNATOR GP-CHARGING
PART OF 2W9774 ALTERNATOR
PART OF 2W9774 ALTERNATOR
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-0812 | [1] | PULLEY | |
| 2. | 9W-1902 M | [1] | SCREW | |
| 3. | 9W-1904 | [1] | FAN | |
| 4. | 9W-1901 M | [3] | SCREW | |
| 5. | 9W-1903 | [1] | FRAME AS | |
| 6. | 9W-1797 | [1] | BEARING | |
| 7. | 9W-1794 | [1] | COVER | |
| 8. | 9W-1906 | [1] | ROTOR | |
| 9. | 9W-1796 | [1] | RING | |
| 10. | 9W-1793 | [1] | BEARING | |
| 11. | 9W-1907 | [1] | STATOR | |
| 12. | 6V-9492 M | [3] | SCREW-MACHINE | |
| 13. | 9W-1798 | [1] | RECTIFIER | |
| 14. | 9W-1905 | [1] | FRAME AS | |
| 15. | 6V-5210 M | [2] | SCREW-MACHINE | |
| 16. | 096-6166 | [3] | WASHER-HARD | |
| 17. | 9W-1799 | [1] | REGULATOR AS | |
| 18. | 9W-1914 | [2] | SPRING | |
| 19. | 8T-4205 | [2] | WASHER-HARD | |
| 20. | 5C-2890 M | [1] | NUT | |
| 21. | 7X-0620 | [3] | WASHER-HARD | |
| 22. | 5C-2874 M | [2] | NUT | |
| 23. | 5C-8312 M | [1] | NUT | |
| 24. | 9W-1795 | [1] | BOOT | |
| 25. | 6V-9673 | [1] | SCREW-MACHINE | |
| 26. | 9W-1900 | [1] | CAPACITOR | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 9W-1911 | [1] | KIT-TERMINAL | ||
| (INCL. WASHERS, NUTS, | ||||
| SPACERS, INSULATORS, | ||||
| TERMINALS & BOOT) | ||||
| 9W-1912 | [1] | KIT-HARDWARE | ||
| (INCL. SCREWS, NUT, | ||||
| KEY, LOCKWASHER, | ||||
| SPACER & WASHER) | ||||
| 9W-1913 | [1] | KIT-BRUSH (INCL. | ||
| BRUSHES & INSULATION) | ||||
| M | METRIC PART | |||
#SEBP15690105
9W-3329: TRANSMISSION AR
9W3329 TRANSMISSION AR
S/N 7BC284-UP
S/N 7BC284-UP
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS#SEBP15690106
6T-5584: TRANSMISSION AR
6T5584 TRANSMISSION AR-DIRECT DRIVE
S/N 7BC1-283
S/N 7BC1-283
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS#SEBP15690107
8E-0735: TORQUE CONVERTER AS
8E0735 TORQUE CONVERTER AS
PART OF 9W3329 TRANSMISSION AR
PART OF 9W3329 TRANSMISSION AR
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| NO SERVICEABLE PARTS | ||||
#SEBP15690108
3T-9608: TORQUE CONVERTER AS
3T9608 TORQUE CONVERTER AS
PART OF 6T5584 & 9W3329 TRANSMISSIONS
PART OF 6T5584 & 9W3329 TRANSMISSIONS
Parts for your 426 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| NO SERVICEABLE PARTS | ||||
#SEBP15690109
6Y-0572: KIT-COLD WEATHER FILTER
6Y0572 KIT-FILTER-COLD WEATHER
FOR USE WITH 9W4030 & 9W8268 TRANSMISSIONS
FOR USE WITH 9W4030 & 9W8268 TRANSMISSIONS
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
Special Instruction
Installation of 7X1590 Sealed Solenoid Kit{1407, 1400}
Installation of 7X1590 Sealed Solenoid Kit{1407, 1400}
Installation of 7X1590 Sealed Solenoid Kit{1407, 1400}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starting Motor Solenoid<BR> (9W0863) Bosch Number 0 331 402 204
4.236 DIESEL ENGINE FOR BACKHOE LOADERS
4.236 DIESEL ENGINE FOR BACKHOE LOADERS
Starter<BR> 6T8832 12 Volt Bosch Number 0001369002
416, 426, 428, 436 & 438 BACKHOE LOADERS OPERATOR'S STATION
416, 426, 428, 436 & 438 BACKHOE LOADERS OPERATOR'S STATION
Systems Operation
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine

