AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T9911 CYLINDER GP-STABILIZER L.H. (CHG 02) S/N 7BC1-1104 & 1109 101.6MM (4 IN.) BORE X 560MM (22 IN.) STROKE 426


HYDRAULIC SYSTEM
CYLINDER GP

BACKHOE LOADER 426 BACKHOE LOADER 7BC
 426 BACKHOE LOADER 7BC00001-01877 (MACHINE) POWERED BY D4.236 ENGINE SEBP1569 426 7BC   (1986)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STABILIZER-RH
4T-6880 CYLINDER GP-STABILIZER-RH
CYLINDER GP-STABILIZER-RH
9T-7069 CYLINDER GP-STABILIZER-RH
CYLINDER GP-STABILIZER-LH
4T-9911 CYLINDER GP-STABILIZER-LH
CYLINDER GP-STABILIZER-LH
9T-7070 CYLINDER GP-STABILIZER-LH
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
 

#SEBP15690350
 

4T-9911: CYLINDER GP-STABILIZER-LH

4T9911 CYLINDER GP-STABILIZER L.H. (CHG 02)
S/N 7BC1-1104 & 1109
101.6MM (4 IN.) BORE X 560MM (22 IN.) STROKE
c341783 SEBP1569
4T9911 CYLINDER GP-STABILIZER-LH Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6950 [1] ROD AS  
2. 9R-0321 [2] BEARING  
3. 4T-6125 J [1] SEAL  
4. 4T-6126 J [1] SEAL  
5. 4T-6127 J [1] SEAL  
6. 4T-6128 J [1] RING  
7. 4T-6889 [1] HEAD  
8. 1K-7098 J [1] RING-BACK-UP  
9. 2H-3934 J [1] SEAL  
10. 4T-6890 [1] PISTON  
11. 5J-5402 [1] SEAL AS  
  5J-5400 J [1] SEAL  
12. 6J-2797 J [1] RING-WEAR  
13. 5P-8250 [1] WASHER  
14. 7J-5639 [1] BOLT-SELF LOCKING  
15. 4T-9910 R [1] CYLINDER AS  
16. 9R-0321 [2] BEARING  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3593 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690351
 

9T-7070: CYLINDER GP-STABILIZER-LH

9T7070 CYLINDER GP-STABILIZER-L.H. (CHG 00)
S/N 7BC1105-1108, 1110-UP
102MM (4 IN.) BORE X 560MM (22 IN.) STROKE
c450706 SEBP1569
9T7070 CYLINDER GP-STABILIZER-LH Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7071 R [1] ROD AS  
2. 9R-0321 [2] BEARING  
3. 4T-6125 J [1] SEAL  
4. 4T-6126 J [1] SEAL  
5. 4T-6127 J [1] SEAL  
6. 4T-6128 J [1] RING  
7. 4T-6889 [1] HEAD  
8. 1K-7098 J [1] RING-BACK-UP  
9. 2H-3934 J [1] SEAL  
10. 4T-7354 [1] PISTON  
11. 5J-5402 [1] SEAL AS  
  5J-5400 J [1] SEAL  
12. 6J-2797 J [1] RING-WEAR  
13. 4K-0684 [1] WASHER-HARD  
14. 7F-6112 [1] BOLT  
15. 4T-9910 R [1] CYLINDER AS  
16. 9R-0321 [2] BEARING  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3593 [1] KIT-SEAL (HYD CYL)  
    (INCLS PARTS MARKED J)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690352
 

4T-5601: CYLINDER GP-BUCKET

4T5601 CYLINDER GP-BACKHOE BUCKET (CHG 03)
TYPE 1. S/N 7BC1-1325
82.55 MM (3.25 IN.) BORE X 797.8 MM (31.4 IN.) STROKE
c341774 SEBP1569
4T5601 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5608 [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 1M-7914 [1] RING-RETAINING  
11. 6J-0793 [2] SEAL AS  
    (EACH INCLUDES)
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-2536 [1] STOP  
13. 9T-1471 [1] SPRING  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
17. 7J-5639 [1] BOLT-SELF LOCKING  
18. 4T-5602 R [1] CYLINDER AS  
19. 9R-0153 [2] BEARING-SLEEVE  
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL (INCL PARTS MARKED J)  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690353
 

4T-5601: CYLINDER GP-BUCKET

4T5601 CYLINDER GP-BACKHOE BUCKET (CHG 05)
TYPE 2. S/N 7BC1-1325
82.55 MM (3.25 IN.) BORE X 797.8 MM (31.4 IN.) STROKE
c347034 SEBP1569
4T5601 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4933 CR [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 8T-6950 C [1] PIN-SPRING  
11. 6J-0793 [2] SEAL AS  
    (EACH INCLUDES)
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-2536 [1] STOP  
13. 9T-1471 [1] SPRING  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
17. 7J-5639 [1] BOLT-SELF LOCKING  
18. 4T-5602 R [1] CYLINDER AS  
19. 9R-0153 [2] BEARING-SLEEVE  
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690354
 

4T-5601: CYLINDER GP-BUCKET

4T5601 CYLINDER GP-BACKHOE BUCKET (CHG 06)
TYPE 3. 7BC1-1325
82.55 MM (3.25 IN.) BORE X 797.8 MM (31.4 IN.) STROKE
c401575 SEBP1569
4T5601 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5799 CR [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 5P-8250 [1] WASHER  
11. 7J-5639 [1] BOLT-SELF LOCKING  
12. 9T-5800 CR [1] CYLINDER AS  
13. 9R-0153 [2] BEARING-SLEEVE  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 6J-0793 C [1] SEAL AS  
  6J-0790 [1] SEAL  
  6J-0789 [1] RING-EXPANDER  
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690355
 

9T-7894: CYLINDER GP

9T7894 CYLINDER GP-BUCKET (CHG 00)
S/N 7BC1326-UP
82.55MM (3.25 IN.) BORE X 797.8MM (31.4 IN.) STROKE
c455581 SEBP1569
9T7894 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5799 R [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 [1] SEAL-LIP TYPE  
4. 5J-8200 [1] SEAL-U-CUP  
5. 6J-6917 [1] SEAL-RING  
6. 4T-5613 [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 [1] RING-BACK-UP  
9. 2H-6184 [1] SEAL-O-RING  
10. 5P-8250 [1] WASHER  
11. 7J-5639 [1] BOLT-SELF LOCKING  
12. 9T-5800 R [1] CYLINDER AS  
13. 9R-0153 [2] BEARING-SLEEVE  
14. 8J-6370 [1] PISTON  
15. 8J-6371 [1] RING-WEAR  
16. 6J-0793 [1] SEAL AS  
  6J-0790 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690356
 

9T-5222: CYLINDER GP-BOOM

9T5222 CYLINDER GP-BOOM (CHG 00)
88.9 MM (3.50 IN.) BORE X 1053.6 MM (41.48 IN.) STROKE
c485776 SEBP1569
9T5222 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5356 R [1] ROD AS  
2. 8C-9133 [1] SEAL  
3. 5J-8200 [1] SEAL-U-CUP  
4. 8C-9124 [1] SEAL AS  
5. 4T-5613 [1] RING-WEAR  
6. 9T-0746 [1] HEAD  
7. 2J-4066 [1] RING-BACK-UP  
8. 2H-6338 [1] SEAL-O-RING  
9. 9T-0769 [1] PISTON  
10. 5J-7013 [1] SEAL AS  
11. 7J-9885 [1] RING-WEAR  
12. 5P-8250 [1] WASHER  
13. 7J-5639 [1] BOLT-SELF LOCKING  
14. 9T-5221 R [1] CYLINDER AS  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690357
 

9T-2751: CYLINDER GP-BACKHOE BUCKET

9T2751 CYLINDER GP-EXTENDABLE BACKHOE BUCKET (CHG 00)
TYPE 1
82.55 MM (3.25 IN.) BORE X 774.8 MM (30.5 IN.) STROKE
PART OF 9R2718 STICK. AN ATTACHMENT
c341717 SEBP1569
9T2751 CYLINDER GP-BACKHOE BUCKET Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5608 [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 1M-7914 [1] RING-RETAINING  
11. 6J-0793 [2] SEAL AS  
    (EACH INCLUDES)
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-2761 [1] STOP  
13. 9T-1471 [1] SPRING  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
17. 7J-5639 [1] BOLT-SELF LOCKING  
18. 4T-5602 R [1] CYLINDER AS  
19. 9R-0153 [2] BEARING-SLEEVE  
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL (INCL PARTS MARKED J)  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690358
 

9T-2751: CYLINDER GP-BACKHOE BUCKET

9T2751 CYLINDER GP-EXTENDABLE BACKHOE BUCKET (CHG 01)
TYPE 2
82.55 MM (3.25 IN.) BORE X 774.88 MM (30.5 IN.) STROKE
PART OF 9R2718 STICK. AN ATTACHMENT
c347299 SEBP1569
9T2751 CYLINDER GP-BACKHOE BUCKET Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4933 R [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 8T-6950 [1] PIN-SPRING  
11. 6J-0793 [2] SEAL AS  
    (EACH INCLUDES)
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-2761 [1] STOP  
13. 9T-1471 [1] SPRING  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
17. 7J-5639 [1] BOLT-SELF LOCKING  
18. 4T-5602 R [1] CYLINDER AS  
19. 9R-0153 [2] BEARING-SLEEVE  
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15690359
 

9T-2751: CYLINDER GP-BACKHOE BUCKET

9T2751 CYLINDER GP-EXTENDABLE BACKHOE BUCKET (CHG 02)
TYPE 3 REPLACED BY 9T7893 CYLINDER
82.55 MM (3.25 IN.) BORE X 774.8 MM (30.5 IN.) STROKE
PART OF 9R2718 STICK. AN ATTACHMENT
c401560 SEBP1569
9T2751 CYLINDER GP-BACKHOE BUCKET Parts scheme
  For full view, you need register

Parts for your 426 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5799 CR [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 7J-5639 [1] BOLT-SELF LOCKING  
11. 6J-0793 C [1] SEAL AS  
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-6320 CR [1] CYLINDER AS  
13. 9R-0153 [2] BEARING-SLEEVE  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation Of Stabilizer Mounted 9R3280 Cylinder Guard Group{6505}
Installation Of Stabilizer Mounted 9R3280 Cylinder Guard Group{6505}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Tilt Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Stabilizer Cylinder (RH & LH)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Boom Cylinders
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Swing Cylinders (RH & LH)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Relief Valve For Swing Cylinders
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Backhoe Bucket Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Stick Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Extendable Stick Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Extendable Stick Backhoe Bucket Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Multipurpose Bucket Clamp Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Bucket Tilt Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Loader Lift Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Multi-Purpose Bucket Cylinder (428)
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Boom Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stick Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Boom And Stick Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Backhoe Bucket Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stick, Extendable Stick, Extendable Stick Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Extendable Stick Cylinder And Backhoe Bucket Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Swing Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizer Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizers
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Sideshift Assembly
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizer Cylinders (428)
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Service Magazine
Larger Radius Now Used Between Pin Boss And Web On Stabilizer Assemblies {6505}
1986/12/01
New Bucket Tilt Cylinder Prevents Tube Assembly Damage{5104}
1987/03/16
Boom Cylinder Repair Kits{5456}
1987/03/23
New Bucket Tilt Cylinder And Tilt Cylinder Tube Assemblies Used{5057,5104}
1987/07/13
New Stabilizer Guards Prevent Boom Cylinder Damage{6505,5456}
1987/11/02
Improved Boom Control{5105,6506}
1987/12/14
New Bearing In Rod End Of Swing Cylinders{5105}
1987/12/21
Larger Piston Retaining Bolt Used In Certain Hydraulic Cylinders {5458,5468}
1988/09/26
Improved Boom Cylinder Lines {5057,5456}
1988/12/26
Procedure To Reinforce Boom Cylinder Mounting Bosses{6501,5456}
1989/01/30
New Specifications For Checking Cylinder Speeds {5450,0374,5104}
1989/05/01
Shutoff Valve And Hoses Available To Shut Off Oil To Swing Cylinders When Roading Backhoe Loaders{4300,5050,5105}
1989/08/14
&quot;Shake&quot; Or Instability In Movement Of Bucket, Stick, Or Boom{5458,5051,5080,5124,5129,5456,5457}
1990/04/09
Improved Crossover Relief Valve Used In Swing Cylinders{5454}
1990/08/27
Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5104,5456,5457,5458,5468}
1990/10/08
Improved Hardware Used In Swing Cylinder Cap Assembly {5105}
1990/10/22
Stuck, Damaged, Missing Check Balls May Cause Swing Drift To Occur In Some Backhoe Loaders{5480,5105}
1990/10/29
Extension Stick Improvement Prevents Premature Failure Of Bucket Cylinder Mounting Bracket{6533,0787}
1991/01/07
Crossover Relief Valves Disabled To Eliminate Swing Drift{5111,5105,5454}
1991/07/01
New Stabilizer Pads Are Wider{7222}
1998/03/09
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 426 :

CYLINDER GP-STABILIZER-RH
9T-7069 CYLINDER GP-STABILIZER-RH
CYLINDER GP-STABILIZER-RH
4T-6880 CYLINDER GP-STABILIZER-RH
CYLINDER GP-STICK
9T-7066 CYLINDER GP-STICK
CYLINDER GP-STICK
9T-5220 CYLINDER GP-STICK
VALVE GP-RELIEF
9T-4752 VALVE GP-RELIEF
VALVE GP
9T-0716 VALVE GP
CYLINDER GP-SWING-RH
9T-0529 CYLINDER GP-SWING-RH
CYLINDER GP-SWING-RH
9T-0529 CYLINDER GP-SWING-RH
CYLINDER GP-STABILIZER-LH
9T-7070 CYLINDER GP-STABILIZER-LH
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP
9T-7894 CYLINDER GP
CYLINDER GP-BOOM
9T-5222 CYLINDER GP-BOOM
CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET

Truck sale:

Caterpillar 426F2LRC, backhoe loader, Construction
66,900 
Caterpillar 426F2LRC, backhoe loader, Construction
- backhoe loader
TRACTAFRIC EQUIPMENT
Caterpillar 426F2LRC, backhoe loader, Construction
66,900 
Caterpillar 426F2LRC, backhoe loader, Construction
- backhoe loader
TRACTAFRIC EQUIPMENT
 
117,810 
Caterpillar 426F2, backhoe loader, Construction
- backhoe loader
MADISA
 
120,450 
Caterpillar 426F2, backhoe loader, Construction
- backhoe loader
MADISA
 
78,000 
Caterpillar 426F2LRC, backhoe loader, Construction
- backhoe loader
FINNING CHILE S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.