AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3512 Vehicular Engine 51Y00513-UP AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



VEHICULAR ENGINE 3512 VEHICULAR ENGINE 51Y
 3512 Vehicular Engine 51Y00513-UP SEBP1572 3512 51Y   (1980)

Parts group 3512:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
AFTERCOOLER GP-WATER
1W-9466 AFTERCOOLER GP-WATER
1W-9466 AFTERCOOLER GP-WATER
AFTERCOOLER GP-WATER
7C-8134 AFTERCOOLER GP-WATER
7C-8134 AFTERCOOLER GP-WATER
S/N 51Y541-UP
AIR CLEANER GP
AIR CLEANER GP
8N-3378 AIR CLEANER GP
8N-3378 AIR CLEANER GP
S/N 51Y541-UP
PART OF 9Y-7073 AIR CLEANER GP
AIR CLEANER GP
9Y-7073 AIR CLEANER GP
9Y-7073 AIR CLEANER GP
S/N 51Y541-UP
INDUSTRIAL
INDICATOR GP-AIR FILTER CHANGE
7N-6782 INDICATOR GP-AIR FILTER CHANGE
7N-6782 INDICATOR GP-AIR FILTER CHANGE
S/N 51Y541-UP
CANNOT BE USED WITH PREMIUM INSTRUMENT PANEL
LINES GP-AIR
LINES GP-AIR
2W-9590 LINES GP-AIR
2W-9590 LINES GP-AIR
LINES GP-AIR
9Y-6284 LINES GP-AIR
9Y-6284 LINES GP-AIR
S/N 51Y541-553
LINES GP-AIR
9Y-6284 LINES GP-AIR
9Y-6284 LINES GP-AIR
S/N 51Y554-UP
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
8N-9515 MANIFOLD GP-EXHAUST
8N-9515 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
9Y-6455 MANIFOLD GP-EXHAUST
9Y-6455 MANIFOLD GP-EXHAUST
S/N 51Y541-546
MANIFOLD GP-EXHAUST
9Y-6455 MANIFOLD GP-EXHAUST
9Y-6455 MANIFOLD GP-EXHAUST
S/N 51Y547-UP
SHUTOFF GP-AIR
SHUTOFF GP-AIR
106-0676 SHUTOFF GP-AIR
106-0676 SHUTOFF GP-AIR
S/N 51Y733-UP
PART OF 9Y-6298 SHUTOFF GP-AIR
SHUTOFF GP-AIR
6I-2986 SHUTOFF GP-AIR
6I-2986 SHUTOFF GP-AIR
S/N 51Y670-732
PART OF 9Y-6298 SHUTOFF GP-AIR
SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
S/N 51Y541-592
INLET
SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
S/N 51Y593-608
INLET
SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
S/N 51Y609-669
INLET
SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
S/N 51Y670-732
INLET
SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
9Y-6298 SHUTOFF GP-AIR
S/N 51Y733-UP
INLET
SHUTOFF GP-AIR
9Y-6299 SHUTOFF GP-AIR
9Y-6299 SHUTOFF GP-AIR
S/N 51Y541-669
PART OF 9Y-6298 SHUTOFF GP-AIR
TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
2W-7912 LINES GP-TURBOCHARGER OIL
2W-7912 LINES GP-TURBOCHARGER OIL
S/N 51Y513-628
LINES GP-TURBOCHARGER OIL
2W-7912 LINES GP-TURBOCHARGER OIL
2W-7912 LINES GP-TURBOCHARGER OIL
S/N 51Y629-UP
LINES GP-TURBOCHARGER OIL
7C-8127 LINES GP-TURBOCHARGER OIL
7C-8127 LINES GP-TURBOCHARGER OIL
S/N 51Y541-601
LINES GP-TURBOCHARGER OIL
7C-8127 LINES GP-TURBOCHARGER OIL
7C-8127 LINES GP-TURBOCHARGER OIL
S/N 51Y602-UP
LINES GP-TURBOCHARGER OIL
8N-9664 LINES GP-TURBOCHARGER OIL
8N-9664 LINES GP-TURBOCHARGER OIL
FOR USE WITH RH MOUNTED OIL FILTER
AN ATTACHMENT
100-4095 CARTRIDGE GP-TURBOCHARGER
100-4095 CARTRIDGE GP-TURBOCHARGER
S/N 51Y709-757
PART OF 102-0297, 102-0299, 102-0300 TURBOCHARGER GP
ALSO AN ATTACHMENT
CARTRIDGE GP-TURBOCHARGER
125-2054 CARTRIDGE GP-TURBOCHARGER
125-2054 CARTRIDGE GP-TURBOCHARGER
S/N 51Y707-UP
PART OF 7E-2727 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7W-3570 CARTRIDGE GP-TURBOCHARGER
7W-3570 CARTRIDGE GP-TURBOCHARGER
S/N 51Y513-708
PART OF 7W-9409, 7W-9410 TURBOCHARGER GP
ALSO AN ATTACHMENT
CARTRIDGE GP-TURBOCHARGER
9Y-1675 CARTRIDGE GP-TURBOCHARGER
9Y-1675 CARTRIDGE GP-TURBOCHARGER
S/N 51Y541-706
PART OF 9Y-6274 TURBOCHARGER GP
TURBOCHARGER GP
102-0297 TURBOCHARGER GP
102-0297 TURBOCHARGER GP
PART OF 4W-1538 TURBOCHARGER GP
AN ATTACHMENT
TURBOCHARGER GP
102-0299 TURBOCHARGER GP
102-0299 TURBOCHARGER GP
PART OF 7W-9628 TURBOCHARGER GP
AN ATTACHMENT
TURBOCHARGER GP
102-0300 TURBOCHARGER GP
102-0300 TURBOCHARGER GP
S/N 51Y709-757
PART OF 2W-9600 TURBOCHARGER GP
TURBOCHARGER GP
2W-9600 TURBOCHARGER GP
2W-9600 TURBOCHARGER GP
S/N 51Y513-708
TURBOCHARGER GP
2W-9600 TURBOCHARGER GP
2W-9600 TURBOCHARGER GP
S/N 51Y709-UP
TURBOCHARGER GP
4W-1538 TURBOCHARGER GP
4W-1538 TURBOCHARGER GP
AN ATTACHMENT
TURBOCHARGER GP
7E-2727 TURBOCHARGER GP
7E-2727 TURBOCHARGER GP
S/N 51Y707-UP
PART OF 9Y-6283 TURBOCHARGER GP
TURBOCHARGER GP
7W-9409 TURBOCHARGER GP
7W-9409 TURBOCHARGER GP
S/N 51Y513-708
PART OF 2W-9600 TURBOCHARGER GP
TURBOCHARGER GP
7W-9410 TURBOCHARGER GP
7W-9410 TURBOCHARGER GP
PART OF 7W-9628 TURBOCHARGER GP
AN ATTACHMENT
TURBOCHARGER GP
7W-9628 TURBOCHARGER GP
7W-9628 TURBOCHARGER GP
Type 1
AN ATTACHMENT
TURBOCHARGER GP
7W-9628 TURBOCHARGER GP
7W-9628 TURBOCHARGER GP
Type 2
AN ATTACHMENT
TURBOCHARGER GP
9Y-6274 TURBOCHARGER GP
9Y-6274 TURBOCHARGER GP
S/N 51Y541-706
PART OF 9Y-6283 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6283 TURBOCHARGER GP
9Y-6283 TURBOCHARGER GP
S/N 51Y541-604
TURBOCHARGER GP
9Y-6283 TURBOCHARGER GP
9Y-6283 TURBOCHARGER GP
S/N 51Y605-706
TURBOCHARGER GP
9Y-6283 TURBOCHARGER GP
9Y-6283 TURBOCHARGER GP
S/N 51Y707-UP
LINES GP-EXHAUST
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New Gasket Used In Aftercooler Groups
1993/09/01
New Check Valve Available{1063,1355}
1994/04/18
Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}
1999/02/01
A New Gasket is Used {1063, 1380}
2005/05/23
Special Instruction
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Technical Information Bulletin
An Improperly Vented Aftercooler May Force Coolant Out Of The Radiator Overflow Tube
An Improperly Vented Aftercooler May Force Coolant Out Of The Radiator Overflow Tube
Specifications
Aftercooler
3500 VEHICULAR ENGINES
Reuse And Salvage Guidelines
Visual Inspection and Salvage Procedures for Aftercoolers in 3500 Engines {1063, 1063, 1379}
Visual Inspection and Salvage Procedures for Aftercoolers in 3500 Engines {1063, 1063, 1379}
Disassembly and Assembly
Aftercooler
3500 VEHICULAR ENGINES
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
New Pipe Used Between Turbocharger And Aftercooler; Improved Turbocharger Compressor Housing Has Two Retaining Bolt Holes{1050,1061,1079}
1987/04/20
New Seal Used In Auxiliary Water Pump Groups{1361}
1989/06/19
New Auxiliary Water Pump Groups Used{1371}
1991/11/18
Thicker Gasket Helps Prevent Leaks In Auxiliary Sea Water Pump Applications {1371}
1993/03/01
Check Valves Require Periodic Maintenance {1355,1063}
1993/09/13
New Gasket Used In Aftercooler Groups {1063}
1993/09/13
Engine News
Round Air Cleaner Inlet Adapter Available
1986/01/01
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups
1987/03/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Air Cleaner Inlets Rotated To Upward Position{1051}
1995/11/20
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Magazine
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced{1054}
1988/09/05
Truck Engine News
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2004/01/01
Engine News
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01
A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
2003/08/01
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
New Pipe Used Between Turbocharger And Aftercooler; Improved Turbocharger Compressor Housing Has Two Retaining Bolt Holes{1050,1061,1079}
1987/04/20
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
Engine News
Round Air Cleaner Inlet Adapter Available
1986/01/01
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups
1987/03/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Center Mating Parts Of Air Inlet Piping Extends Service Life
1993/07/01
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Air Cleaner Inlets Rotated To Upward Position{1051}
1995/11/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Service Magazine
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Air Inlet System
3500 VEHICULAR ENGINES
Service Magazine
Bolt And Washer Added To Engine Air Lines Group To Help Retain Pipes{1058,1060,1050}
1986/05/12
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Engine News
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation
1985/12/01
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01
Changes To Exhaust Manifold Expansion Sleeves And Bolts
1990/08/01
New Exhaust Manifold Sleeve Helps Prevent Leakage{1059}
1994/12/01
New Seal And Sleeve Help Reduce Exhaust Gas Leakage On Dry Slip Joint Type Exhaust Manifold Groups{1059}
1996/12/18
New Exhaust Manifold Sections Contain A Port To Install Temperature Sensors {1059,1921}
1997/02/17
New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01
Improved Gasket for the Exhaust Elbow {1059}
2003/11/01
Technical Information Bulletin
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
Specifications
Exhaust Manifolds
3500 VEHICULAR ENGINES
Reuse And Salvage Guidelines
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Disassembly and Assembly
Exhaust Manifolds (3512)
3500 VEHICULAR ENGINES
Exhaust Manifolds (3516)
3500 VEHICULAR ENGINES
Service Magazine
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
Changes To Exhaust Manifold Expansion Sleeves And Bolts{1059}
1990/08/13
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
O-Ring Seal Not Needed On Turbochargers
1985/10/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups
1991/04/01
New Air Shut-Off Group Available{1078}
1995/01/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
O-Ring Seal Not Needed On Turbochargers{1052}
1985/10/07
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Bolt And Washer Added To Engine Air Lines Group To Help Retain Pipes{1058,1060,1050}
1986/05/12
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Pipe Used Between Turbocharger And Aftercooler; Improved Turbocharger Compressor Housing Has Two Retaining Bolt Holes{1050,1061,1079}
1987/04/20
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30
Changes To Exhaust Manifold Expansion Sleeves And Bolts{1059}
1990/08/13
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups{1052,1053,1056,7553}
1991/04/08
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Engine News
New Air Shut-Off Group Available{1078}
1995/01/01
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Service Magazine
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/04/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
New Turbocharger Oil Supply Tube Assembly Used
1985/04/01
O-Ring Seal Not Needed On Turbochargers
1985/10/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups
1991/04/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Turbocharger Impeller Installation
3500 VEHICULAR ENGINES
Turbocharger TV81
3500 VEHICULAR ENGINES
Turbocharger TV91 &amp; TV92
3500 VEHICULAR ENGINES
Turbocharger C153
3500 VEHICULAR ENGINES
Service Letter-China
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES THE RELEASE OF TURBOCHARGERS &amp; CARTRIDGES FOR CERTAIN 3500 &amp; 3600 ENGINES, AN UPDATE TO THE ASSOCIATED CORE ACCEPTANCE CRITERIA, AND THE TRANSITION OF PPC 267 PARTS TO MAJOR COMPONENTS
CAT REMAN ANNOUNCES THE RELEASE OF TURBOCHARGERS & CARTRIDGES FOR CERTAIN 3500 & 3600 ENGINES, AN UPDATE TO THE ASSOCIATED CORE ACCEPTANCE CRITERIA, AND THE TRANSITION OF PPC 267 PARTS TO MAJOR COMPONENTS
Service Letter-APD
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Disassembly and Assembly
Turbochargers (TV91)
3500 VEHICULAR ENGINES
Turbochargers (C153)
3500 VEHICULAR ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
New Turbocharger Oil Supply Tube Assembly Used{1052,1307}
1985/04/01
O-Ring Seal Not Needed On Turbochargers{1052}
1985/10/07
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Bolt And Washer Added To Engine Air Lines Group To Help Retain Pipes{1058,1060,1050}
1986/05/12
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Pipe Used Between Turbocharger And Aftercooler; Improved Turbocharger Compressor Housing Has Two Retaining Bolt Holes{1050,1061,1079}
1987/04/20
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups{1052,1053,1056,7553}
1991/04/08
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Insulation on Exhaust Components {1000}
2006/03/06
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Engine News
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Service Magazine
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.