AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3512 Vehicular Engine 51Y00513-UP FUEL SYSTEM Caterpillar SIS



VEHICULAR ENGINE 3512 VEHICULAR ENGINE 51Y
 3512 Vehicular Engine 51Y00513-UP SEBP1572 3512 51Y   (1980)

Parts group 3512:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL
155-2600 ACTUATOR GP-ELECTRONIC
155-2600 ACTUATOR GP-ELECTRONIC
CANNOT BE USED WITH FUEL SHUTOFF SOLENOID, POST LOCK GOVERNOR CONTROL
AN ATTACHMENT
CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
4W-2966 CONTROL GP-FUEL INJECTION
4W-2966 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
101-8238 CONTROL GP-FUEL RATIO
101-8238 CONTROL GP-FUEL RATIO
S/N 51Y682-UP
PART OF 124-3174, 6I-0665 GOVERNOR GP
ALSO AN ATTACHMENT
CONTROL GP-FUEL RATIO
2W-1647 CONTROL GP-FUEL RATIO
2W-1647 CONTROL GP-FUEL RATIO
S/N 51Y513-514
PART OF 1W-4858, 1W-4859 GOVERNOR GP
ALSO AN ATTACHMENT
CONTROL GP-FUEL RATIO
7C-3998 CONTROL GP-FUEL RATIO
7C-3998 CONTROL GP-FUEL RATIO
S/N 51Y517-540
PART OF 7C-0083, 7C-2693, 7C-2850 GOVERNOR GP
ALSO AN ATTACHMENT
LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL -RH
S/N 51Y513-516
PART OF 1W-5026, 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL -RH
S/N 51Y518-UP
PART OF 1W-5026, 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
CONTROL GP-GOVERNOR
155-2600 ACTUATOR GP-ELECTRONIC
155-2600 ACTUATOR GP-ELECTRONIC
CANNOT BE USED WITH FUEL SHUTOFF SOLENOID, POST LOCK GOVERNOR CONTROL
AN ATTACHMENT
CONTROL & HOUSING GP-GOVERNOR
7E-3925 CONTROL & HOUSING GP-GOVERNOR
7E-3925 CONTROL & HOUSING GP-GOVERNOR
S/N 51Y568-UP
CONTROL & HOUSING GP-GOVERNOR
7W-2797 CONTROL & HOUSING GP-GOVERNOR
7W-2797 CONTROL & HOUSING GP-GOVERNOR
S/N 51Y541-567
CONTROL GP-GOVERNOR
1W-4865 CONTROL GP-GOVERNOR
1W-4865 CONTROL GP-GOVERNOR
MIDSPEED
FOR USE WITH 3161 GOVERNORS EQUIPPED WITH PNEUMATIC SPEED SETTING
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-1459 CONTROL GP-GOVERNOR
2W-1459 CONTROL GP-GOVERNOR
S/N 51Y513-514
PART OF 1W-4858, 1W-4859 GOVERNOR GP
ALSO AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
S/N 51Y524-UP
PART OF 7C-0084, 7C-2850, 7E-4537, 7W-3285, 9Y-2652 GOVERNOR GP
ALSO AN ATTACHMENT
CONTROL GP-GOVERNOR
4P-6538 CONTROL GP-GOVERNOR
4P-6538 CONTROL GP-GOVERNOR
S/N 51Y682-UP
PART OF 124-3174, 6I-0665 GOVERNOR GP
ALSO AN ATTACHMENT
CONTROL GP-GOVERNOR
7C-3999 CONTROL GP-GOVERNOR
7C-3999 CONTROL GP-GOVERNOR
S/N 51Y517-UP
PART OF 7C-0083, 7C-2693, 7C-2850, 7E-4537, 9Y-2652 GOVERNOR GP
ALSO AN ATTACHMENT
LINKAGE GP-GOVERNOR
2W-1484 LINKAGE GP-GOVERNOR
2W-1484 LINKAGE GP-GOVERNOR
S/N 51Y513-514
PART OF 1W-4858, 1W-4859 GOVERNOR GP
ALSO AN ATTACHMENT
MOUNTING GP-GOVERNOR CONTROL
2W-2255 MOUNTING GP-GOVERNOR CONTROL
2W-2255 MOUNTING GP-GOVERNOR CONTROL
FOR USE WITH DUAL ACTING AIR CYLINDER AND UG-8 WOODWARD GOVERNOR
AN ATTACHMENT
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
AN ATTACHMENT
FILTER GP-FUEL
FILTER GP-FUEL
7E-5776 FILTER GP-FUEL
7E-5776 FILTER GP-FUEL
S/N 51Y541-UP
RH SERVICE
FILTER GP-FUEL
8N-6395 FILTER GP-FUEL
8N-6395 FILTER GP-FUEL -LH
AN ATTACHMENT
FILTER GP-FUEL
8N-8582 FILTER GP-FUEL
8N-8582 FILTER GP-FUEL
S/N 51Y513-517
FILTER GP-FUEL
8N-8582 FILTER GP-FUEL
8N-8582 FILTER GP-FUEL
S/N 51Y518-UP
FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
AN ATTACHMENT
GOVERNOR GP
CONTROL & HOUSING GP-GOVERNOR
7E-3925 CONTROL & HOUSING GP-GOVERNOR
7E-3925 CONTROL & HOUSING GP-GOVERNOR
S/N 51Y568-UP
CONTROL & HOUSING GP-GOVERNOR
7W-2797 CONTROL & HOUSING GP-GOVERNOR
7W-2797 CONTROL & HOUSING GP-GOVERNOR
S/N 51Y541-567
COVER GP-GOVERNOR
2W-0232 COVER GP-GOVERNOR
2W-0232 COVER GP-GOVERNOR
S/N 51Y513-514
PART OF 1W-4858, 1W-4859 GOVERNOR GP
ALSO AN ATTACHMENT
COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
S/N 51Y513-540
LIMITER & PNEUMATIC SPEED SETTING
PART OF 2W-1220 COVER GP-GOVERNOR, 124-3172, 4W-7241, 4W-7247, 7C-0083, 7C-0084, 7C-2693, 7C-2850, 7W-3285 GOVERNOR GP
FIELD REPLACEMENT ORDER @@@@@124-3172@@@@@
ALSO AN ATTACHMENT
COVER GP-GOVERNOR
2W-1220 COVER GP-GOVERNOR
2W-1220 COVER GP-GOVERNOR
S/N 51Y513-514
WITH LIMITER, SHUT DOWN & PNEUMATIC SPEED SETTING
PART OF 1W-4858, 1W-4859 GOVERNOR GP
ALSO AN ATTACHMENT
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
PART OF 1W-5026, 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
S/N 51Y541-UP
PART OF 155-2600 ACTUATOR GP-ELECTRONIC, 9Y-7511 GOVERNOR GP-ELECTRIC
ALSO AN ATTACHMENT
FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
PART OF 1W-4859, 4W-7241, 7C-0083, 7C-0084, 7C-2850, 7W-3285 GOVERNOR GP
ALSO AN ATTACHMENT
FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
S/N 51Y524-UP
PART OF 7C-2850, 7E-4537, 9Y-2652 GOVERNOR GP
ALSO AN ATTACHMENT
FLYWEIGHT GP
2W-1219 FLYWEIGHT GP
2W-1219 FLYWEIGHT GP
PART OF 1W-4858, 4W-7247 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
124-3172 GOVERNOR GP
124-3172 GOVERNOR GP
FIELD REPLACEMENT FOR @@@@@ 2W-0782@@@@@
GOVERNOR GP
124-3174 GOVERNOR GP
124-3174 GOVERNOR GP
S/N 51Y682-UP
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
1W-4858 GOVERNOR GP
1W-4858 GOVERNOR GP
PNEUMATIC SPEED CONTROL
PART OF 1W-5026 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
1W-4859 GOVERNOR GP
1W-4859 GOVERNOR GP
S/N 51Y513-514
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
1W-5026 GOVERNOR GP
1W-5026 GOVERNOR GP -RH
AN ATTACHMENT
GOVERNOR GP
2W-1923 GOVERNOR GP
2W-1923 GOVERNOR GP
PART OF 1W-4859 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
2W-1923 GOVERNOR GP
2W-1923 GOVERNOR GP
S/N 51Y513-514
PART OF 1W-4859 GOVERNOR GP
GOVERNOR GP
2W-1924 GOVERNOR GP
2W-1924 GOVERNOR GP
PART OF 1W-4858 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
4W-7241 GOVERNOR GP
4W-7241 GOVERNOR GP
S/N 51Y515-516
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
4W-7247 GOVERNOR GP
4W-7247 GOVERNOR GP
PART OF 1W-5026 GOVERNOR GP
Type 1
AN ATTACHMENT
GOVERNOR GP
4W-7247 GOVERNOR GP
4W-7247 GOVERNOR GP
PART OF 1W-5026 GOVERNOR GP
Type 2
AN ATTACHMENT
GOVERNOR GP
6I-0665 GOVERNOR GP
6I-0665 GOVERNOR GP
S/N 51Y682-UP
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7C-0083 GOVERNOR GP
7C-0083 GOVERNOR GP
S/N 51Y517-523
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7C-0084 GOVERNOR GP
7C-0084 GOVERNOR GP
PART OF 7W-3331 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
7C-2693 GOVERNOR GP
7C-2693 GOVERNOR GP
3161
PART OF 1W-5026 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
7C-2850 GOVERNOR GP
7C-2850 GOVERNOR GP
S/N 51Y524-540
PART OF 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7E-1457 GOVERNOR GP
7E-1457 GOVERNOR GP
PROVIDES LOW SPEED MARINE GOVERNOR FOR 1200 RPM OPERATION WITH STANDARD ROTATION AND 2 PERCENT DROOP
AN ATTACHMENT
GOVERNOR GP
7E-4537 GOVERNOR GP
7E-4537 GOVERNOR GP
S/N 51Y602-UP
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
7W-3285 GOVERNOR GP
7W-3285 GOVERNOR GP
PART OF 7W-3331 GOVERNOR GP
AN ATTACHMENT
7W-3331 GOVERNOR GP
7W-3331 GOVERNOR GP -RH
PNEUMATIC-EXTERNAL DROOP ADJUSTMENT
AN ATTACHMENT
8N-6712 GOVERNOR GP
8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
9Y-2652 GOVERNOR GP
9Y-2652 GOVERNOR GP
S/N 51Y541-601
PART OF 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
GOVERNOR GP
9Y-7512 GOVERNOR GP
9Y-7512 GOVERNOR GP
S/N 51Y541-628
PART OF 9Y-7511 GOVERNOR GP-ELECTRIC
GOVERNOR GP
9Y-7512 GOVERNOR GP
9Y-7512 GOVERNOR GP
S/N 51Y629-UP
PART OF 9Y-7511 GOVERNOR GP-ELECTRIC
9Y-7511 GOVERNOR GP-ELECTRIC
9Y-7511 GOVERNOR GP-ELECTRIC
S/N 51Y541-UP
HOUSING GP-GOVERNOR
2W-1458 HOUSING GP-GOVERNOR
2W-1458 HOUSING GP-GOVERNOR
S/N 51Y513-601
PART OF 2W-1923, 2W-1924, 4W-7241, 4W-7247, 7C-0083, 7C-0084, 7C-2693, 7C-2850, 7W-3285, 9Y-2652 GOVERNOR GP
ALSO AN ATTACHMENT
HOUSING GP-GOVERNOR
7E-5416 HOUSING GP-GOVERNOR
7E-5416 HOUSING GP-GOVERNOR
S/N 51Y602-UP
PART OF 7E-4537 GOVERNOR GP
ALSO AN ATTACHMENT
LINKAGE GP-GOVERNOR
2W-1484 LINKAGE GP-GOVERNOR
2W-1484 LINKAGE GP-GOVERNOR
S/N 51Y513-514
PART OF 1W-4858, 1W-4859 GOVERNOR GP
ALSO AN ATTACHMENT
PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
S/N 51Y682-UP
PART OF 124-3172, 124-3174, 6I-0665 GOVERNOR GP
ALSO AN ATTACHMENT
TUBE
173-1800 TUBE
173-1800 TUBE
3.76-MM ID, 4.52-MM OD. TEFLON
FIELD REPLACEMENT FOR 2W-0242 TUBE-TEFLON
FIELD INSTALLATION
LINES GP-FUEL
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT
LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL -RH
S/N 51Y513-516
PART OF 1W-5026, 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL
1W-2136 LINES GP-FUEL RATIO CONTROL -RH
S/N 51Y518-UP
PART OF 1W-5026, 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
MANIFOLD GP-FUEL
156-9753 MANIFOLD GP-FUEL
156-9753 MANIFOLD GP-FUEL -RH
S/N 51Y834-UP
PART OF 9Y-9104 LINES GP-FUEL INJECTION
MANIFOLD GP-FUEL
156-9754 MANIFOLD GP-FUEL
156-9754 MANIFOLD GP-FUEL -LH
S/N 51Y834-UP
PART OF 9Y-9104 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
INJECTOR GP-FUEL
4P-9076 INJECTOR GP-FUEL
4P-9076 INJECTOR GP-FUEL
PART OF 9Y-1796 PUMP GP-FUEL INJECTION
AN ATTACHMENT
7C-9576 INJECTOR GP-FUEL
7C-9576 INJECTOR GP-FUEL
S/N 51Y513-520
FIELD REPLACEMENT FOR 7W-2269 INJECTOR AS-FUEL
FIELD INSTALLATION
INJECTOR GP-FUEL
7E-6408 INJECTOR GP-FUEL
7E-6408 INJECTOR GP-FUEL
S/N 51Y541-758
PART OF 9Y-0136 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-5794 LINES GP-FUEL INJECTION
8N-5794 LINES GP-FUEL INJECTION
S/N 51Y513-517
LINES GP-FUEL INJECTION
8N-5794 LINES GP-FUEL INJECTION
8N-5794 LINES GP-FUEL INJECTION
S/N 51Y518-565
LINES GP-FUEL INJECTION
9Y-9104 LINES GP-FUEL INJECTION
9Y-9104 LINES GP-FUEL INJECTION
S/N 51Y566-628
LINES GP-FUEL INJECTION
9Y-9104 LINES GP-FUEL INJECTION
9Y-9104 LINES GP-FUEL INJECTION
S/N 51Y629-833
LINES GP-FUEL INJECTION
9Y-9104 LINES GP-FUEL INJECTION
9Y-9104 LINES GP-FUEL INJECTION
S/N 51Y834-UP
LINES GP-FUEL INJECTION
9Y-9174 LINES GP-FUEL INJECTION
9Y-9174 LINES GP-FUEL INJECTION
S/N 51Y554-UP
PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
1W-6034 FASTENER GP-FUEL INJ PUMP
1W-6034 FASTENER GP-FUEL INJ PUMP -RH
S/N 51Y604-UP
TORQUE CONTROL
PART OF 1W-5026, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
FASTENER GP-FUEL INJ PUMP
4W-5030 FASTENER GP-FUEL INJ PUMP
4W-5030 FASTENER GP-FUEL INJ PUMP
PART OF 155-2600 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
FASTENER GP-FUEL INJ PUMP
7N-4867 FASTENER GP-FUEL INJ PUMP
7N-4867 FASTENER GP-FUEL INJ PUMP
PART OF 7W-3331, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
FASTENER GP-FUEL INJ PUMP
7W-6707 FASTENER GP-FUEL INJ PUMP
7W-6707 FASTENER GP-FUEL INJ PUMP
S/N 51Y541-UP
PART OF 9Y-7511 GOVERNOR GP-ELECTRIC
INJECTOR GP-FUEL
4P-9076 INJECTOR GP-FUEL
4P-9076 INJECTOR GP-FUEL
PART OF 9Y-1796 PUMP GP-FUEL INJECTION
AN ATTACHMENT
7C-9576 INJECTOR GP-FUEL
7C-9576 INJECTOR GP-FUEL
S/N 51Y513-520
FIELD REPLACEMENT FOR 7W-2269 INJECTOR AS-FUEL
FIELD INSTALLATION
INJECTOR GP-FUEL
7E-6408 INJECTOR GP-FUEL
7E-6408 INJECTOR GP-FUEL
S/N 51Y541-758
PART OF 9Y-0136 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-9579 PUMP GP-FUEL INJECTION
2W-9579 PUMP GP-FUEL INJECTION
S/N 51Y521-600
PUMP GP-FUEL INJECTION
7C-2233 PUMP GP-FUEL INJECTION
7C-2233 PUMP GP-FUEL INJECTION
S/N 51Y518-UP
FOR USE WITH ENGINE RATINGS LESS THAN 1600-RPM
AN ATTACHMENT
PUMP GP-FUEL INJECTION
7W-2062 PUMP GP-FUEL INJECTION
7W-2062 PUMP GP-FUEL INJECTION
S/N 51Y513-520
PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
S/N 51Y541-UP
PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
S/N 51Y541-758
PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
Type 1
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
AN ATTACHMENT
PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
Type 2
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
AN ATTACHMENT
PUMP GP-FUEL INJECTION
9Y-6988 PUMP GP-FUEL INJECTION
9Y-6988 PUMP GP-FUEL INJECTION
S/N 51Y601-695
FOR USE WITH ENGINE RATINGS GREATER THAN 1600-RPM
PUMP GP-FUEL INJECTION
9Y-6988 PUMP GP-FUEL INJECTION
9Y-6988 PUMP GP-FUEL INJECTION
S/N 51Y696-UP
FOR USE WITH ENGINE RATINGS GREATER THAN 1600-RPM
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
S/N 51Y513-517; 51Y541-UP
PART OF 7W-3114, 8N-9853 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
PART OF 8N-9853 PUMP GP-FUEL PRIMING
AN ATTACHMENT
PUMP GP-FUEL PRIMING
7W-3114 PUMP GP-FUEL PRIMING
7W-3114 PUMP GP-FUEL PRIMING
S/N 51Y541-UP
CANNOT BE USED WITH ATTACH LH SERVICE FUEL FILTER GPS
PUMP GP-FUEL PRIMING
8N-9853 PUMP GP-FUEL PRIMING
8N-9853 PUMP GP-FUEL PRIMING
S/N 51Y513-517
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
169-8615 PUMP GP-FUEL TRANSFER
169-8615 PUMP GP-FUEL TRANSFER
S/N 51Y513-851
ONE SECTION GEAR
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
ONE SECTION GEAR
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
225-4260 PUMP GP-FUEL TRANSFER
225-4260 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 51Y852-867
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
313-7770 PUMP GP-FUEL TRANSFER
313-7770 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 51Y868-UP
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 51Y513-832
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 51Y833-851
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 51Y852-867
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 51Y868-UP
PUMP GP-GEROTOR
PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
S/N 51Y682-UP
PART OF 124-3172, 124-3174, 6I-0665 GOVERNOR GP
ALSO AN ATTACHMENT
SHUTOFF GP
SHUTOFF GP-MANUAL
1W-4861 SHUTOFF GP-MANUAL
1W-4861 SHUTOFF GP-MANUAL
AN ATTACHMENT
SHUTOFF GP-MANUAL
7N-4869 SHUTOFF GP-MANUAL
7N-4869 SHUTOFF GP-MANUAL -RH, LH MOUNTED
S/N 51Y541-UP
ALSO AN ATTACHMENT
SHUTOFF GP-REMOTE
1W-4862 SHUTOFF GP-REMOTE
1W-4862 SHUTOFF GP-REMOTE
HYDRAULIC-PNEUMATIC
FOR USE WITH 3161 GOVERNORS
AN ATTACHMENT
TORQUE CONTROL GP
TORQUE CONTROL GP
2W-0244 TORQUE CONTROL GP
2W-0244 TORQUE CONTROL GP
AN ATTACHMENT
TORQUE CONTROL GP
2W-1483 TORQUE CONTROL GP
2W-1483 TORQUE CONTROL GP
PART OF 1W-4858 GOVERNOR GP
AN ATTACHMENT
TORQUE CONTROL GP
4W-0986 TORQUE CONTROL GP
4W-0986 TORQUE CONTROL GP
FOR USE WITH 3161 TORQUE RISE GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
4W-0991 TORQUE CONTROL GP
4W-0991 TORQUE CONTROL GP
FOR USE WITH 3161 TORQUE RISE GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
4W-0995 TORQUE CONTROL GP
4W-0995 TORQUE CONTROL GP
PART OF 4W-7247, 7C-2693 GOVERNOR GP
FOR USE WITH 3161 TORQUE RISE GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9168 TORQUE CONTROL GP
7W-9168 TORQUE CONTROL GP
1.5 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9169 TORQUE CONTROL GP
7W-9169 TORQUE CONTROL GP
2.0 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9170 TORQUE CONTROL GP
7W-9170 TORQUE CONTROL GP
2.5 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9171 TORQUE CONTROL GP
7W-9171 TORQUE CONTROL GP
3.5 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9172 TORQUE CONTROL GP
7W-9172 TORQUE CONTROL GP
4.0 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9173 TORQUE CONTROL GP
7W-9173 TORQUE CONTROL GP
6.0 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9174 TORQUE CONTROL GP
7W-9174 TORQUE CONTROL GP
8.0 DEGREE-3161 GOVERNOR
AN ATTACHMENT
TORQUE CONTROL GP
7W-9175 TORQUE CONTROL GP
7W-9175 TORQUE CONTROL GP
5.0 DEGREE-3161 GOVERNOR
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
New Shafts Used In Fuel Injection Control Groups
1983/11/30
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Plug Used In Front Housing For Fuel Injection Control Group
1990/03/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Engine News
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
New Shafts Used In Fuel Injection Control Groups
1983/11/30
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Plug Used In Front Housing For Fuel Injection Control Group
1990/03/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298}
2002/06/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Injection Control Group
3500 VEHICULAR ENGINES
Disassembly and Assembly
Fuel Injection Control Linkage
3500 VEHICULAR ENGINES
Service Magazine
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Engine News
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Engine News
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Plug Used In Front Housing For Fuel Injection Control Group
1990/03/01
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Reference For Springs For The Pneumatic Speed Control Setting On Woodward 3161 Governors {1915}
2001/06/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Fuel Injection Control Group
3500 VEHICULAR ENGINES
Disassembly and Assembly
Fuel Injection Control Linkage
3500 VEHICULAR ENGINES
Service Magazine
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack{1257}
1982/10/11
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Specifications
Tachometer Drive
3500 VEHICULAR ENGINES
Disassembly and Assembly
Tachometer Drive
3500 VEHICULAR ENGINES
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Fuel Filter Service Indicators Now Available
1985/07/01
Restarting Engines Without A Fuel Priming Pump
1985/10/01
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Improved Fuel Priming Pump Used
1987/05/01
Improvements To Auxiliary Fuel Filter Housing Assembly
1990/06/01
New Oil Filter Shield And Shield Mounting Screws Used In Oil Filter Base Assemblies {1306}
1995/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM REPLACING THE FUEL FILTER BASE ON CERTAIN 3508, 3508B, 3512, 3512B, 3516 AND 3516B ENGINES
PRODUCT IMPROVEMENT PROGRAM REPLACING THE FUEL FILTER BASE ON CERTAIN 3508, 3508B, 3512, 3512B, 3516 AND 3516B ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Primary Fuel Filter
3500 VEHICULAR ENGINES
Fuel Filter Base
3500 VEHICULAR ENGINES
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM REPLACING THE FUEL FILTER BASE ON CERTAIN 3508, 3508B, 3512, 3512B, 3516 AND 3516B ENGINES
PRODUCT IMPROVEMENT PROGRAM REPLACING THE FUEL FILTER BASE ON CERTAIN 3508, 3508B, 3512, 3512B, 3516 AND 3516B ENGINES
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Priming Pump And Fuel Filter Base
3500 VEHICULAR ENGINES
Service Magazine
Fuel Filter Service Indicators Now Available{7450}
1985/07/01
Restarting Engines Without A Fuel Priming Pump{1250,1258}
1985/09/30
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improvements To Auxiliary Fuel Filter Housing Assembly {1262}
1990/06/11
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/06/01
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
General Service Information
General Instructions
3500 VEHICULAR ENGINES
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Make Sure Air Cylinder For Governor Actuation Is Correctly Adjusted
1985/04/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Correct SR1 Polarization for 7E5585 Junction Box{7426, 1908}
Correct SR1 Polarization for 7E5585 Junction Box{7426, 1908}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Specifications
Governor Drive
3500 VEHICULAR ENGINES
Governor Fastener Group<BR> (UG8L &amp; 3161 Governors)
3500 VEHICULAR ENGINES
Governor Fastener Group<BR> (2301 Governors With EG10P Actuators)
3500 VEHICULAR ENGINES
Governor Alignment Procedure<BR> (UG8L &amp; 3161 Governors)
3500 VEHICULAR ENGINES
Systems Operation
Systems Operation
3500 VEHICULAR ENGINES
Testing and Adjusting
Testing And Adjusting
3500 VEHICULAR ENGINES
Troubleshooting
Governor Troubleshooting
3500 VEHICULAR ENGINES
Air Fuel Ratio Control Troubleshooting
3500 VEHICULAR ENGINES
Pneumatic Speed Setting Control Troubleshooting
3500 VEHICULAR ENGINES
Disassembly and Assembly
Governor (UG-8)
3500 VEHICULAR ENGINES
Governor (3161)
3500 VEHICULAR ENGINES
Governor Drive
3500 VEHICULAR ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack{1257}
1982/10/11
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/28
Make Sure Air Cylinder For Governor Actuation Is Correctly Adjusted{1269}
1985/04/08
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Fuel Injection Pump Bushing Torque Increased {1253}
1991/04/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Service Magazine
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Remanufactured Unit Injectors Are Available
1983/08/17
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow
1984/02/22
Additional Information For Correct Fuel Injector Timing
1984/12/12
Fuel Filter Service Indicators Now Available
1985/07/01
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Fuel Injector Reference For 3500 Family Engines
1987/01/01
Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors
1987/04/01
Fuel Injector Trim Bolt
1987/06/01
Additional Information For Installing Fuel Injectors
1988/06/01
Replacement Fuel Injector Nozzles With New Nose Cones Available
1988/08/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Fuel Manifolds Changed To Steel
1989/05/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Clamps With Grommets Used In Fuel Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
Improvements To Auxiliary Fuel Filter Housing Assembly
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines
1991/05/01
New Return Spring Used In Unit Injectors
1991/08/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
A New Fuel Shield is Available {1252}
2005/03/28
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Specifications
Fuel Pressure Regulator<BR> (Earlier)
3500 VEHICULAR ENGINES
Fuel Pressure Regulator<BR> (Later)
3500 VEHICULAR ENGINES
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Disassembly and Assembly
Fuel Injectors
3500 VEHICULAR ENGINES
Service Magazine
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/06
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remanufactured Unit Injectors Are Available{1290}
1983/07/11
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow{1252}
1984/02/13
Additional Information For Correct Fuel Injector Timing{1290}
1984/11/19
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors{1290}
1987/04/13
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Two 11 mm Injectors Available For Parts Service{1250,1290}
1988/06/20
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
Improvements To Auxiliary Fuel Filter Housing Assembly {1262}
1990/06/11
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines{1252,1702}
1991/05/27
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Remanufactured Unit Injectors Are Available
1983/08/17
Additional Information For Correct Fuel Injector Timing
1984/12/12
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Fuel Injector Reference For 3500 Family Engines
1987/01/01
Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors
1987/04/01
Fuel Injector Trim Bolt
1987/06/01
Additional Information For Installing Fuel Injectors
1988/06/01
Replacement Fuel Injector Nozzles With New Nose Cones Available
1988/08/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Return Spring Used In Unit Injectors
1991/08/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/06/01
A New Fuel Shield is Available {1252}
2005/03/28
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Magazine
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/06
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remanufactured Unit Injectors Are Available{1290}
1983/07/11
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow{1252}
1984/02/13
Additional Information For Correct Fuel Injector Timing{1290}
1984/11/19
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors{1290}
1987/04/13
Fuel Injector Trim Bolt {1257}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Two 11 mm Injectors Available For Parts Service{1250,1290}
1988/06/20
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Explanation Of Differences In Timing Advance Information
1981/08/26
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Restarting Engines Without A Fuel Priming Pump
1985/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Special Instruction
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Use of 4C8753 Extended Collet{1250}
Use of 4C8753 Extended Collet{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Truck/Ag/Marine
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack{1257}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Remanufactured Unit Injectors Are Available{1290}
1983/07/11
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Why MPG Suffers In Cold Weather{1250,1280}
1983/11/14
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow{1252}
1984/02/13
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Restarting Engines Without A Fuel Priming Pump{1250,1258}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Fuel Injection Timing Adjustment{1250}
1987/04/20
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
New Fuel Injector Assemblies Used{1290}
1989/10/16
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
New Water Regulator Prevents Leakage{1355,1393}
1990/06/25
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines{1252,1702}
1991/05/27
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Fuel Injector Trim Bolt {1257}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Explanation Of Differences In Timing Advance Information
1981/08/26
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Remanufactured Unit Injectors Are Available
1983/08/17
New Shafts Used In Fuel Injection Control Groups
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Additional Information For Correct Fuel Injector Timing
1984/12/12
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Fuel Injector Reference For 3500 Family Engines
1987/01/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors
1987/04/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
Fuel Injector Trim Bolt
1987/06/01
Additional Information For Installing Fuel Injectors
1988/06/01
Two 11 mm Injectors Available For Parts Service
1988/07/01
Replacement Fuel Injector Nozzles With New Nose Cones Available
1988/08/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New Return Spring Used In Unit Injectors
1991/08/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New And Remanufactured Fuel Injector Reference
1993/01/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Performing a Multiple Cylinder Cutout Test {1290}
Performing a Multiple Cylinder Cutout Test {1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Specifications
Fuel Injection
3500 VEHICULAR ENGINES
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTORS ON CERTAIN 3512 ENGINES
Disassembly and Assembly
Fuel Injectors
3500 VEHICULAR ENGINES
Service Magazine
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/06
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Remanufactured Unit Injectors Are Available{1290}
1983/07/11
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Additional Information For Correct Fuel Injector Timing{1290}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors{1290}
1987/04/13
Fuel Injection Timing Adjustment{1250}
1987/04/20
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Two 11 mm Injectors Available For Parts Service{1250,1290}
1988/06/20
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Fuel Injection Pump Bushing Torque Increased {1253}
1991/04/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
New Return Spring Used In Unit Injectors {1290}
1991/07/22
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Restarting Engines Without A Fuel Priming Pump
1985/10/01
Improved Fuel Priming Pump Used
1987/05/01
New Fuel Priming Pump Assemblies Used {1258}
1999/07/01
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Disassembly and Assembly
Fuel Priming Pump And Fuel Filter Base
3500 VEHICULAR ENGINES
Service Magazine
Restarting Engines Without A Fuel Priming Pump{1250,1258}
1985/09/30
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Restarting Engines Without A Fuel Priming Pump
1985/10/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Fuel Transfer Pump Group Is Used {1256}
2002/11/01
A New Fuel Transfer Pump is Used {1256}
2004/10/01
New Fuel Transfer Pump {1256}
2005/09/26
Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256}
Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256}
Special Instruction
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Transfer Pump
3500 VEHICULAR ENGINES
Service Magazine
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Restarting Engines Without A Fuel Priming Pump{1250,1258}
1985/09/30
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Improved Fuel Priming Pump Used{1258}
1987/04/20
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Fuel Injection Pump Bushing Torque Increased {1253}
1991/04/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Injector Trim Bolt {1257}
1987/06/01
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Engine News
New Check Valve Available{1063,1355}
1994/04/18
New Water And Oil Temperature Regulators Available{1330,1355}
1994/12/01
Service Magazine
New Water Regulator Prevents Leakage{1355,1393}
1990/06/25
Check Valves Require Periodic Maintenance {1355,1063}
1993/09/13
Engine News
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Service Magazine
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Manual Shutoff Group
3500 VEHICULAR ENGINES
Disassembly and Assembly
Manual Shutoff
3500 VEHICULAR ENGINES
Service Magazine
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment
1988/11/01
4C8753 Extended Collet Available: Problems With 8T1002 Probe For Fuel Setting
1991/01/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/06
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
4C8753 Extended Collet Available; Problems With 8T1002 Probe For Fuel Setting{0782}
1991/01/14
Engine News
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack{1257}
1982/10/11
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Injector Trim Bolt {1257}
1987/06/01
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.