AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-1255 CAMSHAFT GP 3512 VEHICULAR ENGINE


BASIC ENGINE
CAMSHAFT GP
CLUTCH GP
DRIVE GP-ACCESSORY
CYLINDER BLOCK GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT

VEHICULAR ENGINE 3512 VEHICULAR ENGINE 51Y
 3512 Vehicular Engine 51Y00513-UP SEBP1572 3512 51Y   (1980)

BASIC ENGINE

CAMSHAFT GP
CAMSHAFT GP
7W-1255 CAMSHAFT GP
 

#SEBP15720010
 

7W-1255: CAMSHAFT GP

7W-1255 CAMSHAFT GP
i00110003 SEBP1572
7W1255 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3218 [2] WASHER-THRUST  
2. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
3. 7E-5322 [1] CAMSHAFT-REAR (LH)  
4. 7N-3216 [2] SPACER (35.035X84X12-MM THK)  
5. 7E-6818 [1] CAMSHAFT AS-FRONT (LH)  
  4N-1650 [1] DOWEL  
6. 4W-6664 [2] PLATE AS-TIMING  
7. 133-2966 [1] CAMSHAFT-FRONT (RH)  
8. 5P-0076 [16] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
9. 7E-6815 [1] CAMSHAFT AS-REAR (RH)  
  4N-1650 [1] DOWEL  
10. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8M-9024 [4] WASHER-HARD (10.2X22.5X5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15720011
 

3N-4128: CLUTCH AS

3N-4128 CLUTCH AS
PART OF 3N-4130 CLUTCH GP
AN ATTACHMENT
i00366302 SEBP1572
3N4128 CLUTCH AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-9652 [1] HUB  
2. 4L-3527 [2] PLATE-CLUTCH DRIVING  
3. 3H-9571 [1] PLATE-CENTER  
4. 3N-8125 [1] PLATE AS-PRESSURE  
5. 3N-8123 [1] LOCK PIN  
6. 3N-8124 [1] SPRING  
7. 4H-0002 [4] LEVER  
8. 4B-4721 [8] LINK  
9. 3H-9574 [1] SLEEVE  
10. 4B-4716 [1] COLLAR AS-SLEEVE  
11. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
12. 4B-4758 B [2] SHIM (0.06-IN THK)  
13. 3H-9572 [1] RING-ADJUSTMENT  
14. 6L-3967 [8] PIN  
  6L-3964 [8] PIN-COTTER  
15. 6L-3972 [8] PIN  
  6L-3961 [8] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
16. 8B-7987 [1] KEY-WOODRUFF  
  B   USE AS REQUIRED
 

#SEBP15720012
 

3N-4130: CLUTCH GP

3N-4130 CLUTCH GP
PART OF 7W-0282 POWER TAKE-OFF GP
AN ATTACHMENT
i00366306 SEBP1572
3N4130 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5151 [2] KEY-WOODRUFF  
2. 5L-9653 [1] NUT  
3. 5L-9654 [1] LOCK  
4. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
5. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
6. 5N-8645 [1] HOUSING-CLUTCH  
7. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
8. 0S-1594 [4] BOLT (3/8-16X1-IN)  
9. 5N-8644 [1] PLATE-SEAL  
10. 3N-4128 Y [1] CLUTCH AS  
11. 6B-3223 [2] CUP-BEARING  
  4B-7270 [2] CONE-BEARING  
12. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
13. 3H-6591 [1] BOLT (5/16-18X0.75-IN)  
  5B-2407 [1] LOCK  
14. 5L-9655 [1] RETAINER-BEARING  
15. 5N-7743 [1] SHAFT-CLUTCH  
16. 4H-0019 [1] RACE & ROLLER AS  
17. 5P-7592 [1] RACE-ROLLER BEARING (INNER)  
18. 4B-4754 [1] SHAFT  
19. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
20. 4B-4810 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
21. 4W-8403 CI [1] HOSE AS  
22. 4B-4792 [1] YOKE AS  
  0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
23. 7F-8897 [1] PLATE  
24. 2N-1287 C [1] ELBOW-FLARED  
25. 4W-8404 C [1] FITTING  
26. [1] PLATE-WARNING (POWER TAKE-OFF)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15720013
 

8N-4266: COVER GP-ACCESSORY DRIVE

8N-4266 COVER GP-ACCESSORY DRIVE -RH
AN ATTACHMENT
i00430866 SEBP1572
8N4266 COVER GP-ACCESSORY DRIVE Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7371 [1] SEAL-O-RING  
2. 7N-8374 [1] COVER-PUMP  
3. 0S-1592 [2] BOLT (5/8-11X1.25-IN)  
4. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP15720014
 

8N-9641: COVER GP-CYLINDER BLOCK

8N-9641 COVER GP-CYLINDER BLOCK
i00416536 SEBP1572
8N9641 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9992 [9] COVER-CAMSHAFT  
2. 0S-1594 [8] BOLT (3/8-16X1-IN)  
3. 272-0758 [12] SEAL  
4. 1A-2029 B [1] BOLT (3/8-16X1.125-IN)  
5. 5M-2894 B [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 7N-3298 [2] COVER-BLOCK  
7. 7N-4945 [3] GASKET  
8. 272-0759 [12] SEAL  
9. 5M-2894 [122] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 1N-2914 [12] COVER-CYLINDER BLOCK SIDE  
11. 8N-9993 [3] COVER-CAMSHAFT  
12. 9X-8872 [47] BOLT-LOCKING (3/8-16X0.875-IN)  
13. 3B-1915 [4] BOLT (3/8-16X1.375-IN)  
14. 4W-5015 C [1] COVER  
15. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
16. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 2W-7628 [1] PLATE-DRAIN  
18. 8T-6761 B [3] PLUG-PIPE (1-11-1/2 NPT THD)  
19. 7X-7732 B [1] PLUG-PIPE  
20. 9X-8872 B [1] BOLT-LOCKING (3/8-16X0.875-IN)  
22. 1A-2029 [71] BOLT (3/8-16X1.125-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15720015
 

9Y-7276: COVER GP-CYLINDER BLOCK

9Y-7276 COVER GP-CYLINDER BLOCK
S/N 51Y541-UP
i00446145 SEBP1572
9Y7276 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9992 [10] COVER-CAMSHAFT  
2. 0S-1594 [84] BOLT (3/8-16X1-IN)  
3. 208-2362 [12] SEAL  
4. 9Y-7279 [1] COVER-CRANKSHAFT  
5. 9X-8872 [48] BOLT-LOCKING (3/8-16X0.875-IN)  
6. 4W-5015 [1] COVER  
7. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
8. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 7N-3298 [3] COVER-BLOCK  
10. 7N-4945 [3] GASKET  
11. 8T-6761 [3] PLUG-PIPE (1-11-1/2 NPT THD)  
12. 208-2363 [12] SEAL  
13. 5M-2894 [120] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 1N-2914 [12] COVER-CYLINDER BLOCK SIDE  
15. 8N-9993 [1] COVER-CAMSHAFT  
 

#SEBP15720016
 

8N-9643: COVER GP-FLYWHEEL HOUSING

8N-9643 COVER GP-FLYWHEEL HOUSING
S/N 51Y513-897
i00416545 SEBP1572
8N9643 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4954 [1] GASKET-COVER  
2. 2P-2772 [1] COVER  
3. 4B-8407 [2] GASKET-COPPER  
4. 4H-7869 [3] GASKET  
5. 4N-0996 [2] COVER  
6. 4N-1114 [3] COVER  
7. 5F-0304 [2] PLUG  
8. 7N-3170 [1] COVER  
9. 7N-4319 C [2] COVER  
10. 7N-4320 C [2] GASKET  
11. 9S-1343 [1] PLUG-CUP  
12. 234-8937 [1] SEAL-INTEGRAL  
13. 252-8374 [2] GASKET  
14. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
15. 0S-1591 C [3] BOLT (3/8-16X1.5-IN)  
16. 0S-1594 C [40] BOLT (3/8-16X1-IN)  
17. 2J-6274 [1] SEAL-O-RING  
18. 4B-4043 [9] BOLT (5/8-11X1.375-IN)  
19. 5M-2894 C [44] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 5P-8247 [9] WASHER-HARD (17X32X3.5-MM THK)  
21. 4B-8407 CB [1] GASKET-COPPER  
22. 5F-0304 CB [1] PLUG  
23. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15720017
 

8N-9643: COVER GP-FLYWHEEL HOUSING

8N-9643 COVER GP-FLYWHEEL HOUSING
S/N 51Y898-UP
i07077880 SEBP1572
8N9643 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4954 [1] GASKET-COVER  
2. 2P-2772 [1] COVER  
3. 4B-8407 [2] GASKET-COPPER  
4. 4H-7869 [3] GASKET  
5. 4W-9890 C [2] COVER  
6. 4N-1114 [3] COVER  
7. 5F-0304 [2] PLUG  
8. 7N-3170 [1] COVER  
9. 7N-4319 [2] COVER  
10. 7N-4320 [2] GASKET  
11. 9S-1343 [1] PLUG-CUP  
12. 234-8937 [1] SEAL-INTEGRAL (FLYWHEEL HOUSING)  
13. 4F-3765 C [2] GASKET-SHAFT  
14. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
15. 165-3929 [3] BOLT (3/8-16X1.5-IN)  
16. 0S-1594 [40] BOLT (3/8-16X1-IN)  
17. 2J-6274 [1] SEAL-O-RING  
18. 4B-4043 [9] BOLT (5/8-11X1.375-IN)  
19. 5M-2894 [44] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 5P-8247 [9] WASHER-HARD (17X32X3.5-MM THK)  
21. 4B-8407 B [1] GASKET-COPPER  
22. 5F-0304 B [1] PLUG  
23. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
24. 165-3929 B [1] BOLT (3/8-16X1.5-IN)  
25. 0S-1594 B [1] BOLT (3/8-16X1-IN)  
26. 5M-2894 B [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15720018
 

9Y-6268: COVER GP-FLYWHEEL HOUSING

9Y-6268 COVER GP-FLYWHEEL HOUSING
S/N 51Y541-UP
i00444862 SEBP1572
9Y6268 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2772 [1] COVER  
2. 4B-8407 [1] GASKET-COPPER  
3. 4H-7869 [3] GASKET  
4. 4N-1114 [3] COVER  
5. 5F-0304 [1] PLUG  
6. 7N-4319 [2] COVER  
7. 7N-4320 [2] GASKET  
8. 9S-1343 [1] PLUG-CUP  
9. [1] COVER  
  6V-6640 B SEALANT  
10. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
11. 0S-1591 [3] BOLT (3/8-16X1.5-IN)  
12. 0S-1594 [16] BOLT (3/8-16X1-IN)  
13. 1T-0720 [20] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
14. 2J-6274 [1] SEAL-O-RING  
15. 4B-4043 [9] BOLT (5/8-11X1.375-IN)  
16. 4N-0933 [1] GASKET  
17. 5M-2894 [40] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5P-8247 [9] WASHER-HARD (17X32X3.5-MM THK)  
19. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
  B   USE AS REQUIRED
 

#SEBP15720019
 

8N-9642: COVER GP-FRONT HOUSING

8N-9642 COVER GP-FRONT HOUSING
i00416541 SEBP1572
8N9642 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-4951 [2] COVER  
2. 235-3546 [2] SEAL-O-RING  
3. 6V-3348 [2] SEAL-O-RING  
4. 1A-2029 [27] BOLT (3/8-16X1.125-IN)  
5. 5M-2894 [28] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 7N-4952 [2] COVER  
7. 259-4598 [3] SEAL-O-RING  
8. 5P-0840 [2] SEAL-O-RING  
9. 8N-9658 [1] PLUG  
10. 0L-1329 [2] BOLT (1/2-13X3-IN)  
11. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
12. 3P-1896 B [2] PLUG-CUP  
13. 2W-5285 [1] COVER  
14. 8N-9885 [1] GASKET-COVER  
15. 5L-5840 [1] WASHER (9.25X16.92X1.83-MM THK)  
16. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6V-0405 [2] SEAL-BONDED  
  B   USE AS REQUIRED
 

Information:

Engine News
Reusability Of Camshaft Rollers And Roller Followers
1982/09/22
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
New Camshafts Used In SAE Standard [CCW] Rotation Engines
1985/05/01
New Camshaft Installation Tools Available
1985/09/01
New 8T2998 Lubricant Available
1986/03/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Piston And Camshaft Changes
1987/10/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
Quality of Remanufactured Camshafts {1210}
2003/07/01
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Service Letter-NACD
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Camshafts<BR> (3508)
3500 VEHICULAR ENGINES
Camshafts<BR> (3512 and 3516)
3500 VEHICULAR ENGINES
Service Letter-China
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Disassembly and Assembly
Rear Gear Group
3500 VEHICULAR ENGINES
Camshafts
3500 VEHICULAR ENGINES
Camshaft Bearings
3500 VEHICULAR ENGINES
Service Magazine
6V4019 Camshaft Pilot Group Is Available{0622,1210,1211,1201}
1980/12/22
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
New Camshaft Installation Tools Available{0600}
1985/08/19
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09

Caterpillar Parts SIS Catalog 3512 :

BELT TIGHTENER GP
8N-9418 BELT TIGHTENER GP
AIR COMPRESSOR GP
8N-2688 AIR COMPRESSOR GP
AIR COMPRESSOR GP
8N-2688 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-3244 AIR COMPRESSOR GP
ADAPTER GP-FLYWHEEL HOUSING
7N-1100 ADAPTER GP-FLYWHEEL HOUSING
ADAPTER GP-CRANKSHAFT
7C-3897 ADAPTER GP-CRANKSHAFT
9Y-6267 ENGINE AR
8N-5803 ENGINE AR
CLUTCH AS
3N-4128 CLUTCH AS
CLUTCH GP
3N-4130 CLUTCH GP
COVER GP-ACCESSORY DRIVE
8N-4266 COVER GP-ACCESSORY DRIVE
COVER GP-CYLINDER BLOCK
8N-9641 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
9Y-7276 COVER GP-CYLINDER BLOCK
COVER GP-FLYWHEEL HOUSING
8N-9643 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
8N-9643 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
9Y-6268 COVER GP-FLYWHEEL HOUSING

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.