AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-1855 COVER GP-VALVE MECHANISM 3512 VEHICULAR ENGINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

VEHICULAR ENGINE 3512 VEHICULAR ENGINE 51Y
 3512 Vehicular Engine 51Y00513-UP SEBP1572 3512 51Y   (1980)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
 

#SEBP15720020
 

7N-1855: COVER GP-VALVE MECHANISM

7N-1855 COVER GP-VALVE MECHANISM
i00091710 SEBP1572
7N1855 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8894 C [1] COVER  
2. 272-0757 C [1] SEAL-VALVE COVER  
3. 1A-9579 [4] BOLT (5/16-18X1.5-IN)  
4. 9M-1974 C [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15720021
 

7E-4897: CRANKSHAFT AS

7E-4897 CRANKSHAFT AS
S/N 51Y513-601
FIELD REPLACEMENT FOR 7W-0214 CRANKSHAFT AS
FIELD INSTALLATION
i00109991 SEBP1572
7E4897 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2288 [6] PLUG  
2. 7E-4201 [36] BOLT-12 POINT HEAD  
3. 7N-2003 [24] DOWEL  
4. 7E-4770 [12] COUNTERWEIGHT  
5. 7E-4725 [36] WASHER-HARD  
 

#SEBP15720022
 

8N-7103: CRANKSHAFT GP

8N-7103 CRANKSHAFT GP
S/N 51Y513-601
i00110023 SEBP1572
8N7103 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0214 [1] CRANKSHAFT AS  
2. 4W-6358 [36] BOLT-12 POINT HEAD  
  7N-2003 [24] DOWEL  
  9Y-3830 [36] WASHER-HARD  
3. 2W-2288 [6] PLUG  
4. 4W-5704 [7] BEARING-MAIN (STANDARD)  
  4W-5705 AB BEARING-MAIN (0.63-MM US)  
  4W-5706 AB BEARING-MAIN (1.27-MM US)  
  4W-5708 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  4W-5707 AB BEARING-MAIN (0.63-MM OS)  
5. 7C-6209 C [2] PLATE-THRUST  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15720023
 

8N-7103: CRANKSHAFT GP

8N-7103 CRANKSHAFT GP
S/N 51Y602-UP
i00092873 SEBP1572
8N7103 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-6786 C [1] CRANKSHAFT AS  
  7N-2003 [24] DOWEL  
2. 128-4845 [36] BOLT AS  
3. 2W-2288 [6] PLUG  
4. 105-0253 [7] BEARING-MAIN (STANDARD)  
  105-0254 AB BEARING-MAIN (0.63-MM US)  
  105-0255 AB BEARING-MAIN (1.27-MM US)  
  105-0256 AB BEARING-MAIN (0.63-MM OS)  
  105-0257 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
5. 7C-6209 [2] PLATE-THRUST  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15720024
 

8N-7103: CRANKSHAFT GP

8N-7103 CRANKSHAFT GP
S/N 51Y837-UP
i01339955 SEBP1572
8N7103 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-6786 [1] CRANKSHAFT AS  
  7N-2003 [24] DOWEL  
2. 128-4845 [36] BOLT AS  
3. 2W-2288 [6] PLUG  
4. 149-6031 CJ [7] BEARING AS-MAIN (STANDARD)  
  149-6032 ABC BEARING-MAIN (0.63-MM US)  
  149-6033 ABC BEARING-MAIN (1.27-MM US)  
  149-6034 ABC BEARING-MAIN (0.63-MM OS)  
  149-6035 ABC BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
5. 7C-6209 J [2] PLATE-THRUST  
   
    AVAILABLE REPAIR KIT(S):
  196-9530 J KIT-BASIC ENGINE REPAIR (MAIN BEARING)  
    (INCLUDES THRUST PLATES & MAIN BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15720025
 

100-8026: CYLINDER BLOCK AS

100-8026 CYLINDER BLOCK AS
S/N 51Y731-UP
PART OF 115-3504, 115-3505, 115-5152, 240-6650 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-5154@@@@@
i00092980 SEBP1572
1008026 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 223-1696 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [3] PLUG  
6. 8T-2929 [3] SEAL-O-RING  
7. 8T-2928 [3] SEAL-O-RING  
8. 211-7826 [12] LINER-CYLINDER BLOCK  
9. 7N-2046 [36] SEAL-O-RING  
10. 8N-4707 [12] BAND-FILLER  
 

#SEBP15720026
 

101-1227: CYLINDER BLOCK AS

101-1227 CYLINDER BLOCK AS
S/N 51Y707-730
PART OF 2W-2944, 7E-1060 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@101-1244@@@@@
i00092981 SEBP1572
1011227 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 9Y-9175 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [2] PLUG  
6. 8T-2929 [2] SEAL-O-RING  
7. 8T-2928 [2] SEAL-O-RING  
8. 110-6993 [12] LINER-CYLINDER BLOCK  
9. 7N-2046 [36] SEAL-O-RING  
10. 8N-4707 [12] BAND-FILLER  
 

#SEBP15720027
 

101-1241: CYLINDER BLOCK AS

101-1241 CYLINDER BLOCK AS
S/N 51Y707-730
PART OF 101-1244 CYLINDER BLOCK GP
i00092982 SEBP1572
1011241 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 9Y-9175 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [2] PLUG  
6. 8T-2929 [2] SEAL-O-RING  
7. 8T-2928 [2] SEAL-O-RING  
 

#SEBP15720028
 

106-2779: CYLINDER BLOCK AS

106-2779 CYLINDER BLOCK AS
S/N 51Y731-UP
PART OF 115-5154 CYLINDER BLOCK GP
i02478951 SEBP1572
1062779 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 223-1696 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [3] PLUG  
6. 8T-2928 [3] SEAL-O-RING  
7. 8T-2929 [3] SEAL-O-RING  
 

#SEBP15720029
 

2W-2943: CYLINDER BLOCK AS

2W-2943 CYLINDER BLOCK AS
S/N 51Y513-516
PART OF 2W-2944 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 2W-8245@@@@@, @@@@@ 7C-6957@@@@@
i00109748 SEBP1572
2W2943 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8288 [28] BOLT (3/4-16X11-IN)  
2. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 8N-8216 [7] CAP-CRANKSHAFT BEARING  
4. 7N-2042 [5] PLUG  
5. 1W-5420 [1] ADAPTER  
6. 7N-2046 [36] SEAL-O-RING  
7. 8N-6861 [12] LINER-CYLINDER BLOCK  
8. 8N-4707 [12] BAND-FILLER  
9. 8S-0768 [6] SEAL-O-RING  
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
New Cylinder Head Gasket And Higher Cylinder Head Bolt Torque
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2003/09/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2004/09/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2005/05/23
Remanufactured Rocker Arm has been Changed {1123}
2005/10/03
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Specifications
Valve Covers
3500 VEHICULAR ENGINES
Valve Rocker Arms, Lifters, And Bridges
3500 VEHICULAR ENGINES
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Disassembly and Assembly
Valve Covers
3500 VEHICULAR ENGINES
Rocker Shaft Assemblies And Push Rods
3500 VEHICULAR ENGINES
Valve Lifters
3500 VEHICULAR ENGINES
Bridge Dowels
3500 VEHICULAR ENGINES
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal {1107}
1985/01/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Mechanism Groups Use New Lifter Assemblies{1209}
1985/08/05
Stronger Push Rod Used{1208}
1985/08/05
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Head Gasket And Higher Cylinder Head Bolt Torque{1124,1101}
1990/10/29
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3512 :

COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
9Y-6268 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
8N-9643 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
8N-9643 COVER GP-FLYWHEEL HOUSING
COVER GP-CYLINDER BLOCK
9Y-7276 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
8N-9641 COVER GP-CYLINDER BLOCK
COVER GP-ACCESSORY DRIVE
8N-4266 COVER GP-ACCESSORY DRIVE
CLUTCH GP
3N-4130 CLUTCH GP
CRANKSHAFT AS
7E-4897 CRANKSHAFT AS
CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
CYLINDER BLOCK AS
100-8026 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1227 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1241 CYLINDER BLOCK AS
CYLINDER BLOCK AS
106-2779 CYLINDER BLOCK AS

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.