AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

155-2565 COVER GP-VALVE MECHANISM CHROME PLATED FOR USE WITH MUI ENGINE AN ATTACHMENT 3516 GEN SET ENGINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

GEN SET ENGINE 3516 GEN SET ENGINE 25Z
 3516 Generator Set Engine 25Z00684-02188 SEBP1573 3516 25Z   (1982)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
155-2565 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
155-2566 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
265-8040 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
FASTENER GP-VALVE MECHANISM
1W-8109 FASTENER GP-VALVE MECHANISM
VALVE MECHANISM GP
4P-3003 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
 

#SEBP15730040
 

155-2565: COVER GP-VALVE MECHANISM

155-2565 COVER GP-VALVE MECHANISM
CHROME PLATED
FOR USE WITH MUI ENGINE
AN ATTACHMENT
i01038305 SEBP1573
1552565 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2569 [1] COVER  
2. 133-6270 [4] BOLT (5/16-18X1.5-IN)  
3. 133-6265 [4] WASHER (8.8X16X2-MM THK)  
4. 272-0757 [1] SEAL-VALVE COVER  
 

#SEBP15730041
 

155-2566: COVER GP-VALVE MECHANISM

155-2566 COVER GP-VALVE MECHANISM
CHROME PLATED
FOR USE WITH EUI ENGINE
AN ATTACHMENT
i01038293 SEBP1573
1552566 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2571 [1] COVER  
2. 133-6270 [4] BOLT (5/16-18X1.5-IN)  
3. 133-6265 [4] WASHER (8.8X16X2-MM THK)  
4. 272-0760 [1] SEAL-VALVE COVER (BASE)  
 

#SEBP15730042
 

265-8040: COVER GP-VALVE MECHANISM

265-8040 COVER GP-VALVE MECHANISM
S/N 25Z684-2188
AN ATTACHMENT
i02304356 SEBP1573
2658040 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 265-8041 [1] COVER  
2. 272-0757 [1] SEAL-VALVE COVER (VALVE COVER BASE)  
3. 1A-9579 [4] BOLT (5/16-18X1.5-IN)  
4. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP15730043
 

7N-1855: COVER GP-VALVE MECHANISM

7N-1855 COVER GP-VALVE MECHANISM
i00091710 SEBP1573
7N1855 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8894 C [1] COVER  
2. 272-0757 C [1] SEAL-VALVE COVER  
3. 1A-9579 [4] BOLT (5/16-18X1.5-IN)  
4. 9M-1974 C [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15730044
 

8N-0337: CRANKSHAFT GP

8N-0337 CRANKSHAFT GP
S/N 25Z684-1715; 73Z174-301
i00091739 SEBP1573
8N0337 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-3916 [1] CRANKSHAFT AS  
2. 7E-4201 [48] BOLT-12 POINT HEAD  
  7E-4202 [48] WASHER-HARD (16.2X30X5-MM THK)  
3. 7N-2003 [32] DOWEL  
4. 2W-2288 [8] PLUG  
5. 7C-6209 C [2] PLATE-THRUST  
6. 105-0253 [9] BEARING-MAIN (STANDARD)(STANDARD)  
  105-0254 A [9] BEARING-MAIN (0.63-MM US)(0.63MM US)  
  105-0255 A [9] BEARING-MAIN (1.27-MM US)(1.27MM US)  
  105-0256 A [9] BEARING-MAIN (0.63-MM OS)(0.63MM OS)  
  105-0257 A [9] BEARING-MAIN (0.63-MM OS, 0.63-MM US)(0.63MM US-0.63MM OS)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15730045
 

8N-0337: CRANKSHAFT GP

8N-0337 CRANKSHAFT GP
S/N 25Z1716-2188; 73Z302-807
i00784658 SEBP1573
8N0337 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-6788 C [1] CRANKSHAFT AS  
2. 128-4845 [48] BOLT AS  
3. 7N-2003 [32] DOWEL  
4. 2W-2288 [8] PLUG  
5. 7C-6209 [2] PLATE-THRUST  
6. 105-0253 [9] BEARING-MAIN (STANDARD)  
  105-0254 AB BEARING-MAIN (0.63-MM US)  
  105-0255 AB BEARING-MAIN (1.27-MM US)  
  105-0256 AB BEARING-MAIN (0.63-MM OS)  
  105-0257 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15730046
 

101-1173: CYLINDER BLOCK AS

101-1173 CYLINDER BLOCK AS
S/N 73Z682-807
PART OF 115-5155 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-5160@@@@@
i00092296 SEBP1573
1011173 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-4813 [2] PLUG  
2. 7X-7925 [36] BOLT (7/8-14X11-IN)  
3. 8N-4707 [16] BAND-FILLER  
5. 211-7826 [16] LINER-CYLINDER BLOCK  
6. 223-1696 [9] CAP-CRANKSHAFT BEARING  
7. 5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
8. 7N-2046 [48] SEAL-O-RING  
9. 8T-2928 [2] SEAL-O-RING  
10. 8T-2929 [2] SEAL-O-RING  
11. 4W-4813 B [2] PLUG  
12. 8T-2928 B [2] SEAL-O-RING  
13. 8T-2929 B [2] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP15730047
 

101-1228: CYLINDER BLOCK AS

101-1228 CYLINDER BLOCK AS
S/N 73Z607-681
PART OF 2W-8248 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@101-1245@@@@@
i00092297 SEBP1573
1011228 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4707 [16] BAND-FILLER  
2. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
3. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
4. 4W-4813 [2] PLUG  
5. 8T-2929 [2] SEAL-O-RING  
6. 7N-2046 [48] SEAL-O-RING  
7. 110-6993 [16] LINER-CYLINDER BLOCK  
8. 8T-2928 [2] SEAL-O-RING  
 

#SEBP15730048
 

101-1242: CYLINDER BLOCK AS

101-1242 CYLINDER BLOCK AS
S/N 25Z684-2188; 73Z607-681
PART OF 101-1245 CYLINDER BLOCK GP
i00092298 SEBP1573
1011242 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-2928 [2] SEAL-O-RING  
2. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
3. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
4. 4W-4813 [2] PLUG  
5. 8T-2929 [5] SEAL-O-RING  
 

#SEBP15730049
 

106-2780: CYLINDER BLOCK AS

106-2780 CYLINDER BLOCK AS
S/N 73Z682-807
PART OF 115-5160 CYLINDER BLOCK GP
i00093318 SEBP1573
1062780 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
2. 7X-7925 [36] BOLT (7/8-14X11-IN)  
3. 223-1696 [9] CAP-CRANKSHAFT BEARING  
4. 4W-4813 [4] PLUG  
5. 8T-2929 [4] SEAL-O-RING  
6. 8T-2928 [4] SEAL-O-RING  
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
New Cylinder Head Gasket And Higher Cylinder Head Bolt Torque
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2003/09/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2004/09/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2005/05/23
Remanufactured Rocker Arm has been Changed {1123}
2005/09/12
Information on the New Valve Recession Tool Gp that Is Used on All G3500 Commercial Engines {0701, 1105}
2010/04/02
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
A New Lifter Assembly Is Used for G3500 Engines {1209}
2013/08/21
Remanufactured Camshaft and Lifter Kits Are Available for Certain 3500B Engines {1209, 1210}
2013/09/16
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3500 Industrial and Generator Set Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Valve Mechanism
3500 Generator Set Engines
Valve Mechanism
3500 Generator Set Engines
Fuel Injector Mechanism
3500 Generator Set Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3500 Engines
Valve Lash and Valve Bridge Adjustment
3500 Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Engines
Valve Lash Check
3500 Engines
Disassembly and Assembly
Valve Cover - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft and Push Rods - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Disassemble
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Assemble
3508, 3512 and 3516 Generator Set Engines
Valve Cover Base - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal {1107}
1985/01/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Stronger Push Rod Used{1208}
1985/08/05
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Head Gasket And Higher Cylinder Head Bolt Torque{1124,1101}
1990/10/29
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3516 :

COVER GP-OIL PAN
7W-6401 COVER GP-OIL PAN
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7W-2378 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
7E-6432 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
COVER GP-ENGINE LIFTING EYE
3N-8594 COVER GP-ENGINE LIFTING EYE
COVER GP-VALVE MECHANISM
155-2566 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
265-8040 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CYLINDER BLOCK AS
101-1173 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1228 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1242 CYLINDER BLOCK AS

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.