1W-1653 CARTRIDGE GP-TURBOCHARGER S/N 73Z174-807 PART OF 1N-4062, 1N-4063, 2W-6157 TURBOCHARGER GP AN ATTACHMENT 3516

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

0. 1W-1653 CARTRIDGE
1. 2W-1644 CARTRIDGE
2. 2W-8331 CARTRIDGE
3. 4W-1225 CARTRIDGE
4. 4W-9133 CARTRIDGE
5. 6I-0851 CARTRIDGE
6. 6N-7960 CARTRIDGE
7. 7C-4332 CARTRIDGE
8. 7C-4333 CARTRIDGE
9. 7C-4335 CARTRIDGE
0. INFORMATION

GEN SET ENGINE 3516 GEN SET ENGINE 25Z
3516 Generator Set Engine 25Z00684-02188 SEBP1573 3516 25Z (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

118-2988 CARTRIDGE GP-TURBOCHARGER

188-4610 CARTRIDGE GP-TURBOCHARGER

1W-1653 CARTRIDGE GP-TURBOCHARGER

2W-1644 CARTRIDGE GP-TURBOCHARGER

2W-8331 CARTRIDGE GP-TURBOCHARGER

4W-1225 CARTRIDGE GP-TURBOCHARGER

#SEBP15730750

1W-1653: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

1W-1653 CARTRIDGE GP-TURBOCHARGER
S/N 73Z174-807
PART OF 1N-4062, 1N-4063, 2W-6157 TURBOCHARGER GP
AN ATTACHMENT

i00093382 SEBP1573

1W1653 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9N-3701	[1]	SHROUD
2.	7N-3759 J	[1]	RING-PISTON
3.	6N-5004 J	[1]	BEARING-THRUST
4.	9M-8911	[1]	COLLAR-THRUST
5.	9M-8919 J	[2]	RING-SEAL
6.	9M-8915 J	[3]	RING-RETAINING
7.	0S-1616	[4]	BOLT (1/4-20X1-IN)
8.	6N-7962	[1]	PLATE AS-BACKING
	7W-0130	[1]	BEARING-THRUST
	7W-0131	[3]	STUD-DRIVE
9.	1P-1120 J	[1]	RING-SEAL
10.	129-4863	[1]	WHEEL-COMPRESSOR
11.	9N-2046	[1]	SPACER-THRUST
12.	1S-1770 J	[1]	LOCKNUT-TURBOCHARGER
13.	9N-2036 J	[4]	PLATE-LOCK
14.	9N-2035	[1]	HOUSING AS-CENTER
	4M-6646	[2]	PIN-GROOVED
	7W-2368	[1]	RING-SEAL
15.	9N-2043	[1]	WHEEL & SHAFT AS

			AVAILABLE REPAIR KIT(S):
	9N-2041	[1]	KIT-BEARING
			(INCLUDES TWO BEARINGS)
	2W-0715 J	[1]	KIT-CARTRIDGE (TURBOCHARGER)
			(INCLUDES SEAL RINGS, RETAINER RINGS, LOCK PLATES, LOCK-NUTS, & BEARING-THRUST)
	J		KIT MARKED J INCLUDES PART(S) MARKED J

#SEBP15730751

2W-1644: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

2W-1644 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 1W-6007, 7W-9935 TURBOCHARGER GP
AN ATTACHMENT

i00358105 SEBP1573

2W1644 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	Z	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	Z	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	Z	[2]	BEARING-JOURNAL
9.	Z	[1]	RING-SEAL
10.	2W-1181	[1]	WHEEL & SHAFT AS
11.	Z	[4]	RING-RETAINING
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	Z	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	CZ	[1]	RING-SEAL
17.	2W-1298	[1]	WHEEL-COMPRESSOR
18.	ZM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128 C	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244 C	[1]	PIN
	AZ	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	4W-5736 C	[1]	CARTRIDGE GP-TURBOCHARGER
			(INCL PARTS MARKED Z; SMHS8329 FORM TURBOCHARGER CARTRIDGE REPAIR KIT)
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP15730752

2W-8331: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

2W-8331 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 2W-8325, 4W-9058, 4W-9110, 7C-0591 TURBOCHARGER GP
AN ATTACHMENT

i00360793 SEBP1573

2W8331 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	2W-8332	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 J	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 CJ	[1]	RING-SEAL
17.	2W-7222	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128 C	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 CJ	[1]	CARTRIDGE GP-TURBOCHARGER
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP15730753

4W-1225: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

4W-1225 CARTRIDGE GP-TURBOCHARGER
S/N 73Z174-807
PART OF 4W-1226, 4W-1227 TURBOCHARGER GP
AN ATTACHMENT

i00378592 SEBP1573

4W1225 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-3411 J	[1]	LOCKNUT-TURBOCHARGER (7/16-20-THD)
2.	1N-3505	[1]	SPACER-THRUST
3.	9M-8919 J	[2]	RING-SEAL
4.	1N-3383	[1]	PLATE AS-BACKING
5.	1N-3557 J	[1]	RING-SEAL
6.	4W-1224	[1]	HOUSING AS-BEARING
	4M-6646	[2]	PIN-GROOVED
7.	4W-1222 J	[1]	RING-PISTON
8.	4W-1329	[1]	SHROUD
9.	4W-1223	[1]	SHAFT AS-TURBINE
10.	5P-7234 J	[3]	RING-RETAINING
11.	1N-3712 J	[1]	BEARING-THRUST
12.	1N-3365	[1]	COLLAR-THRUST
13.	2J-3118	[4]	BOLT-LOCKING (3/8-16X1.25-IN)
14.	1N-3562	[1]	WHEEL-COMPRESSOR

			AVAILABLE REPAIR KIT(S):
	1N-3593	[1]	KIT-BEARING (STANDARD)(STANDARD)
	4W-4832 AB	[1]	KIT-BEARING (0.25-MM OS)
	4W-4833 AB	[1]	KIT-BEARING (0.25-MM US)
	4W-4834 AB	[1]	KIT-BEARING (0.25-MM OS, 0.25-MM US)
	7W-4874 J	[1]	KIT-CARTRIDGE (TURBOCHARGER)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J

#SEBP15730754

4W-9133: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

4W-9133 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-735
PART OF 4W-9109, 7W-9931, 7W-9933, 7W-9934 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00380640 SEBP1573

4W9133 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	2W-1181	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 J	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 J	[2]	RING-SEAL
17.	2W-1298	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER (TURBOCHARGER)
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP15730755

6I-0851: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

6I-0851 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 108-9341 TURBOCHARGER GP
AN ATTACHMENT

i00391236 SEBP1573

6I0851 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0848	[1]	PLATE-COMPRESSOR BACK
2.	1P-1120	[1]	RING-SEAL
3.	4P-3817	[1]	BEARING-THRUST
4.	7N-6608	[1]	RING-PISTON
5.	4P-6527	[1]	SHROUD
6.	4P-6529	[1]	SHAFT AS-TURBINE
7.	9M-8915	[3]	RING-RETAINING
8.	4P-3821	[1]	HOUSING-BEARING
9.	4P-3816	[1]	COLLAR-THRUST
10.	9M-8919	[1]	RING-SEAL
11.	1S-1770	[1]	LOCKNUT-TURBOCHARGER
12.	6I-0849	[1]	WHEEL-COMPRESSOR
13.	4P-3818 M	[3]	BOLT (M4X0.7X10-MM)
14.	4P-3819 M	[4]	BOLT (M6X1X22-MM)

			AVAILABLE REPAIR KIT(S):
	9N-2041	[1]	KIT-BEARING
			(KIT INCLUDES TWO BEARINGS)
	M		METRIC PART

#SEBP15730756

6N-7960: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

6N-7960 CARTRIDGE GP-TURBOCHARGER
S/N 25Z1974-2188
PART OF 1W-6551, 7N-6377 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00389272 SEBP1573

6N7960 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-1936	[1]	SHROUD
2.	7N-3759 J	[1]	RING-PISTON
3.	6N-5004 J	[1]	BEARING-THRUST
4.	9M-8911	[1]	COLLAR-THRUST
5.	9M-8919 J	[2]	RING-SEAL
6.	9M-8915 J	[3]	RING-RETAINING
7.	0S-1616	[4]	BOLT (1/4-20X1-IN)
8.	6N-7962	[1]	PLATE AS-BACKING
	7W-0130	[1]	BEARING-THRUST
	7W-0131	[3]	STUD-DRIVE
9.	1P-1120 J	[1]	RING-SEAL
10.	4P-3429	[1]	WHEEL-COMPRESSOR
11.	9N-2046	[1]	SPACER-THRUST
12.	1S-1770 J	[1]	LOCKNUT-TURBOCHARGER
13.	9N-2036 J	[4]	PLATE-LOCK
14.	9N-2035	[1]	HOUSING AS-CENTER
	4M-6646	[2]	PIN-GROOVED
	7W-2368	[1]	RING-SEAL
15.	9N-2043	[1]	WHEEL & SHAFT AS

			AVAILABLE REPAIR KIT(S):
	9N-2041	[1]	KIT-BEARING
			(INCLUDES BEARINGS & WASHERS)
	7C-7446 AB		KIT-BEARING (0.51-MM OS)
			(INCLUDES BEARINGS & WASHERS)
	7C-7447 AB		KIT-BEARING (0.51-MM OS, 0.25-MM US)
			(INCLUDES BEARINGS & WASHERS)
	7N-3194 AB		KIT-BEARING (0.25-MM OS, 0.25-MM US)
			(INCLUDES BEARINGS & WASHERS)
	8N-4157 AB		KIT-BEARING (0.25-MM OS)
			(INCLUDES BEARINGS & WASHERS)
	8N-4160 AB		KIT-BEARING (0.25-MM US)
			(INCLUDES BEARINGS & WASHERS)
	2W-0715 J	[1]	KIT-CARTRIDGE (TURBOCHARGER)
			(INCLUDES SEAL RINGS, RETAINER RINGS, LOCK PLATES, LOCKNUTS, & THRUST BEARING)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP15730757

7C-4332: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7C-4332 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 7C-4319, 7C-4320, 7C-4322, 7C-4331 TURBOCHARGER GP
AN ATTACHMENT

i00406680 SEBP1573

7C4332 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	7C-3611	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	7C-3610	[1]	HOUSING AS-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 J	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 J	[1]	RING-SEAL
17.	2W-7222	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER
	J		KIT(S) MARKED J INCLUDES PART(S) J
	M		METRIC PART

#SEBP15730758

7C-4333: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7C-4333 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 7C-4314, 7C-4327 TURBOCHARGER GP
AN ATTACHMENT

i00406683 SEBP1573

7C4333 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	Z	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	Z	[2]	BEARING-JOURNAL
9.	Z	[1]	RING-SEAL
10.	7C-3572	[1]	WHEEL & SHAFT AS
11.	Z	[4]	RING-RETAINING
12.	7C-3610	[1]	HOUSING AS-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	Z	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	Z	[1]	RING-SEAL
17.	2W-1298	[1]	WHEEL-COMPRESSOR
18.	ZM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN
	AZ	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	4W-5736	[1]	CARTRIDGE GP-TURBOCHARGER
			(INCL PARTS MARKED Z)
	A		NOT PART OF THIS GROUP
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP15730759

7C-4335: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7C-4335 CARTRIDGE GP-TURBOCHARGER
S/N 25Z815-1567
PART OF 7C-4321, 7C-4324, 7C-4325, 7C-4326 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00406689 SEBP1573

7C4335 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	7C-3611	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	7C-3610	[1]	HOUSING AS-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 J	[1]	RING-SEAL
17.	2W-1298	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER
	J		KIT(S) MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

Information:

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

Engine News

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Improved Turbocharger Oil Drain Elbows
1984/12/12

Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12

Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01

Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01

Turbine Oil Seal Improved On Turbochargers
1988/08/01

Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01

Use Care When Positioning Turbocharger Compressor Housing
1989/05/01

New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures
1991/08/01

"Off-Size" Bearing Kits Available
1991/10/01

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}
1991/11/01

New Bellows Assemblies Used In Turbocharger Groups
1992/12/01

Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01

Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01

Record Turbocharger Serial Number On Warranty Claims{1052}
1996/02/16

New Turbocharger Turbine Housing Helps Reduce Turbine Inlet Temperatures{1065,1052}
1996/12/18

Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15

Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24

Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05

Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18

New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01

Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01

New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01

Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01

New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01

Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20

New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30

Packaging the Turbocharger {1052}
2007/02/26

Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
2012/08/23

Cat® Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24

Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Operation and Maintenance Manual

Turbocharger - Inspect
3500 Industrial and Generator Set Engines

Special Instruction

Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}

2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}

4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}

Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}

Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}

Service Letter-NACD

Product Support Program For Reducing High Exhaust Temperatures On Certain 3516 Four Turbo 50 Hertz Engine Generator Sets
Product Support Program For Reducing High Exhaust Temperatures On Certain 3516 Four Turbo 50 Hertz Engine Generator Sets

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Australia

Product Support Program For Installing Turbocharger Improvements On Certain 3508, 3512, And 3516 Generator Set Engines Rated For 50HZ (1500 RPM)
Product Support Program For Installing Turbocharger Improvements On Certain 3508, 3512, And 3516 Generator Set Engines Rated For 50HZ (1500 RPM)

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-CFEL

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-CSARL

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Americas

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Brazil

Specifications

Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (TV72 & TW72) (TV78 & TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (TV92 & TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (C153 & W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbocharger
3500 Generator Set Engines

Service Letter-China

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Asia

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Systems Operation

Turbocharger
3500 Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}

Information Release Memo

REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES

CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Disassembly and Assembly

Turbocharger - Remove and Install
3508, 3512 and 3516 Generator Set Engines

Turbocharger - Disassemble
3508, 3512 and 3516 Generator Set Engines

Turbocharger - Assemble
3508, 3512 and 3516 Generator Set Engines

Exhaust Elbow - Remove and Install
3508, 3512 and 3516 Generator Set Engines

Service Magazine

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28

Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10

Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10

Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16

Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07

Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15

Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03

Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09

Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25

Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08

Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03

6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10

Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22

Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01

Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01

New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22

New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures {1052}
1991/07/22

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}
1991/11/25

New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21

New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18

Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

188-4610 CARTRIDGE GP-TURBOCHARGER

118-2988 CARTRIDGE GP-TURBOCHARGER

100-4095 CARTRIDGE GP-TURBOCHARGER

9Y-7667 AIR CLEANER GP

9Y-7666 AIR CLEANER GP

9Y-0999 AIR CLEANER GP

9Y-0998 AIR CLEANER GP

2W-1644 CARTRIDGE GP-TURBOCHARGER

2W-8331 CARTRIDGE GP-TURBOCHARGER

4W-1225 CARTRIDGE GP-TURBOCHARGER

4W-9133 CARTRIDGE GP-TURBOCHARGER

6I-0851 CARTRIDGE GP-TURBOCHARGER

6N-7960 CARTRIDGE GP-TURBOCHARGER

7C-4332 CARTRIDGE GP-TURBOCHARGER

7C-4333 CARTRIDGE GP-TURBOCHARGER

Truck sale:

719,892

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

298,989

Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

800,000

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC