7C-4336 CARTRIDGE GP-TURBOCHARGER S/N 25Z799-1941 PART OF 7C-4330 TURBOCHARGER GP 3516 GEN SET ENGINE

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

0. 7C-4336 CARTRIDGE
1. 7E-0682 CARTRIDGE
2. 7E-0683 CARTRIDGE
3. 7E-0685 CARTRIDGE
4. 7E-0687 CARTRIDGE
5. 7W-3520 CARTRIDGE
6. 7W-3570 CARTRIDGE

MUFFLER GP

7. 249-0472 CONVERTER

LINES GP-EXHAUST

8. 7W-0288 ELBOW GP-E
9. 7W-0289 ELBOW GP-E
0. INFORMATION

GEN SET ENGINE 3516 GEN SET ENGINE 25Z
3516 Generator Set Engine 25Z00684-02188 SEBP1573 3516 25Z (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

7C-4333 CARTRIDGE GP-TURBOCHARGER

7C-4335 CARTRIDGE GP-TURBOCHARGER

7C-4336 CARTRIDGE GP-TURBOCHARGER

7E-0682 CARTRIDGE GP-TURBOCHARGER

7E-0683 CARTRIDGE GP-TURBOCHARGER

7E-0685 CARTRIDGE GP-TURBOCHARGER

#SEBP15730760

7C-4336: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7C-4336 CARTRIDGE GP-TURBOCHARGER
S/N 25Z799-1941
PART OF 7C-4330 TURBOCHARGER GP

i00406692 SEBP1573

7C4336 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	7C-3611	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	7C-3610	[1]	HOUSING AS-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 J	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 J	[1]	RING-SEAL
17.	7W-3519	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER
	J		KIT(S) MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP15730761

7E-0682: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7E-0682 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 7E-0671, 7E-0680 TURBOCHARGER GP
AN ATTACHMENT

i00397419 SEBP1573

7E0682 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	7E-0688 L	[1]	RING-SEAL
3.	3J-1577	[1]	RING-RETAINING (INTERNAL)
4.	7E-0689 L	[1]	COVER
5.	6V-6353 JL	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	7E-0690 L	[1]	SHIELD
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	7E-0697	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	7E-0694	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	7E-0693 J	[1]	BEARING-THRUST
15.	7E-0691 L	[1]	RING-FLINGER
16.	2W-1240 JL	[1]	RING-SEAL
17.	2W-7222	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER
	7E-0692 L	[1]	KIT-TURBOCHARGER REPAIR (COMPRESSOR OIL SEAL)
	J		KIT(S) MARKED J INCLUDES PART(S) MARKED J
	L		KIT(S) MARKED L INCLUDES PART(S) MARKED L
	M		METRIC PART

#SEBP15730762

7E-0683: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7E-0683 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 7E-0663, 7E-0676 TURBOCHARGER GP

i00397423 SEBP1573

7E0683 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	7E-0688 L	[1]	RING-SEAL
3.	3J-1577	[1]	RING-RETAINING (INTERNAL)
4.	7E-0689 L	[1]	COVER
5.	6V-6353 JL	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	7E-0690 L	[1]	SHIELD
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	7E-0696	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	7E-0694	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	7E-0693 J	[1]	BEARING-THRUST
15.	7E-0691 L	[1]	RING-FLINGER
16.	2W-1240 JL	[1]	RING-SEAL
17.	2W-1298	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN
	1W-4795 F	[1]	PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)
	8H-3710 F	[4]	SCREW-TAPPING (6-32X0.375-IN)

			AVAILABLE REPAIR KIT(S):
	4W-5736	[1]	CARTRIDGE GP-TURBOCHARGER
			(INCL PARTS MARKED J)
	7E-0692	[1]	KIT-TURBOCHARGER REPAIR (COMPRESSOR OIL SEAL)
			(INCL PARTS MARKED L)
	F		NOT SHOWN
	J
	L
	M		METRIC PART

#SEBP15730763

7E-0685: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7E-0685 CARTRIDGE GP-TURBOCHARGER
S/N 25Z684-2188
PART OF 7E-0673, 7E-0674, 7E-0675 TURBOCHARGER GP
AN ATTACHMENT

i00397429 SEBP1573

7E0685 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	2W-1940 J	[1]	WASHER-RETAINING
3.	7E-0688 L	[1]	RING-SEAL
4.	3J-1577	[1]	RING-RETAINING (INTERNAL)
5.	7E-0689 L	[1]	COVER
6.	6V-6353 JL	[1]	SEAL-O-RING
7.	2W-1350	[1]	SHROUD-HEAT
8.	7E-0690 L	[1]	SHIELD
9.	2W-1233 J	[2]	BEARING-JOURNAL
10.	2W-1234 J	[1]	RING-SEAL
11.	7E-0697	[1]	WHEEL & SHAFT AS
12.	2W-1984 J	[4]	RING-RETAINING
13.	7E-0694	[1]	HOUSING-BEARING
14.	2W-1250	[1]	RING-THRUST
15.	7E-0693 J	[1]	BEARING-THRUST
16.	7E-0691 L	[1]	RING-FLINGER
17.	2W-1240 JL	[1]	RING-SEAL
18.	2W-1298	[1]	WHEEL-COMPRESSOR
19.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
20.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
21.	3B-4504	[3]	LOCKWASHER
22.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER
	7E-0692 L	[1]	KIT-TURBOCHARGER REPAIR (COMPRESSOR OIL SEAL)
	J		KIT(S) MARKED J INCLUDES PART(S) MARKED J
	L		KIT(S) MARKED L INCLUDES PART(S) MARKED L
	M		METRIC PART

#SEBP15730764

7E-0687: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7E-0687 CARTRIDGE GP-TURBOCHARGER
S/N 25Z1714-2188
PART OF 140-3136, 7E-0679 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00397431 SEBP1573

7E0687 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	7E-0688 L	[1]	RING-SEAL
3.	3J-1577		RING-RETAINING (INTERNAL)
4.	7E-0689 L	[1]	COVER
5.	6V-6353 JL	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	7E-0690 L	[1]	SHIELD
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	7E-0697	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	7E-0694	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	7E-0693 J	[1]	BEARING-THRUST
15.	7E-0691 L	[1]	RING-FLINGER
16.	2W-1240 JL	[1]	RING-SEAL
17.	7W-3519	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER
	7E-0692 L	[1]	KIT-TURBOCHARGER REPAIR (COMPRESSOR OIL SEAL)
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	L		KIT MARKED L INCLUDES PART(S) MARKED L
	M		METRIC PART

#SEBP15730765

7W-3520: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7W-3520 CARTRIDGE GP-TURBOCHARGER
S/N 25Z736-798
PART OF 7C-0590 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00432177 SEBP1573

7W3520 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINING
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	2W-8332	[1]	WHEEL & SHAFT AS
11.	2W-1984 J	[4]	RING-RETAINING
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 J	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 J	[1]	RING-SEAL
17.	7W-3519	[1]	WHEEL-COMPRESSOR
18.	2W-1268 JM	[1]	LOCKNUT (M14X1.5-THD)
19.	8H-3128	[3]	BOLT-SOCKET HEAD (1/4-20X0.625-IN)
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN

			AVAILABLE REPAIR KIT(S):
	4W-5736 J	[1]	CARTRIDGE GP-TURBOCHARGER (TURBOCHARGER CARTRIDGE)
	J		(INCLUDES THESE PARTS)
	M		METRIC PART

#SEBP15730766

7W-3570: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

7W-3570 CARTRIDGE GP-TURBOCHARGER
S/N 73Z174-625
PART OF 7W-3483, 7W-3484, 7W-9409, 7W-9564 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00432181 SEBP1573

7W3570 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-3411 J	[1]	LOCKNUT-TURBOCHARGER (7/16-20-THD)
2.	1N-3505	[1]	SPACER-THRUST
3.	9M-8919 J	[2]	RING-SEAL
4.	7W-2300	[1]	PLATE AS-BACKING
	7W-0130	[1]	BEARING-THRUST
	7W-0131	[1]	STUD-DRIVE
5.	1N-3557 J	[1]	RING-SEAL
6.	4W-1224	[1]	HOUSING AS-BEARING
	4M-6646	[2]	PIN-GROOVED
7.	4W-1222 J	[1]	RING-PISTON
8.	4W-1329	[1]	SHROUD
9.	4W-1223	[1]	SHAFT AS-TURBINE
10.	9Y-1493	[1]	WHEEL-COMPRESSOR
11.	1N-3712 J	[1]	BEARING-THRUST
12.	1N-3365	[1]	COLLAR-THRUST
13.	2J-3118 C	[4]	BOLT-LOCKING (3/8-16X1.25-IN)
14.	5P-7234 J	[3]	RING-RETAINING

			AVAILABLE REPAIR KIT(S):
	1N-3593	[1]	KIT-BEARING (STANDARD)
	7W-4874 CJ	[1]	KIT-CARTRIDGE (TURBOCHARGER)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J INCLUDES PART(S) MARKED J

#SEBP15730767

249-0472: CONVERTER GP-CATALYTIC

CONVERTER GP-CATALYTIC

249-0472 CONVERTER GP-CATALYTIC
AN ATTACHMENT

i02215433 SEBP1573

2490472 CONVERTER GP-CATALYTIC Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	249-0438	[1]	INSULATION AS
2.	256-0330	[1]	CONVERTER AS

#SEBP15730768

7W-0288: ELBOW GP-EXHAUST

ELBOW GP-EXHAUST

7W-0288 ELBOW GP-EXHAUST
S/N 73Z174-807
WATERCOOLED
AN ATTACHMENT

i00431196 SEBP1573

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-4302	[2]	COLLAR-SEAL
2.	1W-5941	[1]	COVER
3.	1W-6737	[1]	HOUSING
4.	1W-9451	[2]	SEAL-TURBOCHARGER
6.	5P-0599	[2]	CLAMP-BAND
7.	7E-6016	[2]	GASKET
8.	7E-6017	[1]	COVER
9.	7N-3368	[1]	GASKET
10.	7N-6222	[2]	ADAPTER-TURBOCHARGER
11.	7N-7130	[1]	TUBE AS
12.	7N-7415	[1]	FITTING
13.	7W-0290	[1]	ELBOW AS-EXHAUST
	4F-5695	[3]	PLUG-CUP
14.	8N-8954	[1]	TUBE AS
15.	009-4440	[1]	CONNECTOR
16.	0S-1594	[7]	BOLT (3/8-16X1-IN)
17.	2A-4639	[4]	BOLT (3/8-16X1.625-IN)
18.	2P-1312	[1]	ELBOW
19.	3B-0551	[1]	PLUG-PIPE
20.	3J-5389	[2]	PLUG (EXTERNAL)
21.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
22.	7L-4773	[2]	SEAL-O-RING

#SEBP15730769

7W-0289: ELBOW GP-EXHAUST

ELBOW GP-EXHAUST

7W-0289 ELBOW GP-EXHAUST
S/N 73Z174-807
WATERCOOLED
AN ATTACHMENT

i00431198 SEBP1573

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-5941	[1]	COVER
2.	1W-6737	[1]	HOUSING
3.	1W-9450	[2]	SEAL-TURBOCHARGER
4.	2W-1546	[2]	COLLAR-SEAL
6.	6V-0447	[2]	CLAMP-HOSE
7.	7E-6016	[2]	GASKET
8.	7E-6017	[1]	COVER
9.	7N-3368	[1]	GASKET
10.	7N-6209	[2]	ADAPTER-TURBOCHARGER
11.	7N-7130	[1]	TUBE AS
12.	7N-7415	[1]	FITTING
13.	7W-0290	[1]	ELBOW AS-EXHAUST
	4F-5695	[3]	PLUG-CUP
14.	8N-8954	[1]	TUBE AS
15.	009-4440	[1]	CONNECTOR
16.	0S-1594	[7]	BOLT (3/8-16X1-IN)
17.	2A-4639	[4]	BOLT (3/8-16X1.625-IN)
18.	2P-1312	[1]	ELBOW
19.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
20.	7L-4773	[2]	SEAL-O-RING
21.	7W-6492	[2]	PLUG-PIPE (1/2-14-THD)
22.	8T-6761	[1]	PLUG-PIPE (1-11-1/2 NPT THD)

Information:

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

Engine News

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Improved Turbocharger Oil Drain Elbows
1984/12/12

Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12

Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01

Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01

Turbine Oil Seal Improved On Turbochargers
1988/08/01

Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01

Use Care When Positioning Turbocharger Compressor Housing
1989/05/01

New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures
1991/08/01

"Off-Size" Bearing Kits Available
1991/10/01

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}
1991/11/01

New Bellows Assemblies Used In Turbocharger Groups
1992/12/01

Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01

Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01

Record Turbocharger Serial Number On Warranty Claims{1052}
1996/02/16

New Turbocharger Turbine Housing Helps Reduce Turbine Inlet Temperatures{1065,1052}
1996/12/18

Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15

Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24

Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05

Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18

New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01

Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01

New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01

Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01

New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01

Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20

New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30

Packaging the Turbocharger {1052}
2007/02/26

Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
2012/08/23

Cat® Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24

Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Operation and Maintenance Manual

Turbocharger - Inspect
3500 Industrial and Generator Set Engines

Special Instruction

Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}

2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}

4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}

Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}

Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}

Service Letter-NACD

Product Support Program For Reducing High Exhaust Temperatures On Certain 3516 Four Turbo 50 Hertz Engine Generator Sets
Product Support Program For Reducing High Exhaust Temperatures On Certain 3516 Four Turbo 50 Hertz Engine Generator Sets

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Australia

Product Support Program For Installing Turbocharger Improvements On Certain 3508, 3512, And 3516 Generator Set Engines Rated For 50HZ (1500 RPM)
Product Support Program For Installing Turbocharger Improvements On Certain 3508, 3512, And 3516 Generator Set Engines Rated For 50HZ (1500 RPM)

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-CFEL

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-CSARL

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Americas

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Brazil

Specifications

Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (TV72 & TW72) (TV78 & TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (TV92 & TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (C153 & W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbocharger
3500 Generator Set Engines

Service Letter-China

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Asia

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Systems Operation

Turbocharger
3500 Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}

Information Release Memo

REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES

CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Disassembly and Assembly

Turbocharger - Remove and Install
3508, 3512 and 3516 Generator Set Engines

Turbocharger - Disassemble
3508, 3512 and 3516 Generator Set Engines

Turbocharger - Assemble
3508, 3512 and 3516 Generator Set Engines

Exhaust Elbow - Remove and Install
3508, 3512 and 3516 Generator Set Engines

Service Magazine

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28

Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10

Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10

Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16

Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07

Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15

Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03

Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09

Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25

Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08

Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03

6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10

Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22

Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01

Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01

New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22

New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures {1052}
1991/07/22

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}
1991/11/25

New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21

New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18

Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

7C-4335 CARTRIDGE GP-TURBOCHARGER

7C-4333 CARTRIDGE GP-TURBOCHARGER

7C-4332 CARTRIDGE GP-TURBOCHARGER

6N-7960 CARTRIDGE GP-TURBOCHARGER

6I-0851 CARTRIDGE GP-TURBOCHARGER

4W-9133 CARTRIDGE GP-TURBOCHARGER

4W-1225 CARTRIDGE GP-TURBOCHARGER

2W-8331 CARTRIDGE GP-TURBOCHARGER

7E-0682 CARTRIDGE GP-TURBOCHARGER

7E-0683 CARTRIDGE GP-TURBOCHARGER

7E-0685 CARTRIDGE GP-TURBOCHARGER

7E-0687 CARTRIDGE GP-TURBOCHARGER

7W-3520 CARTRIDGE GP-TURBOCHARGER

7W-3570 CARTRIDGE GP-TURBOCHARGER

249-0472 CONVERTER GP-CATALYTIC

7W-0288 ELBOW GP-EXHAUST

Truck sale:

719,892

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

298,989

Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

800,000

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC