FUEL SYSTEM
PUMP GP-FUEL INJECTIONPUMP GP-FUEL PRIMING
FUEL SYSTEM
PUMP GP-FUEL INJECTION#SEBP15731110
7W-2062: PUMP GP-FUEL INJECTION
7W-2062 PUMP GP-FUEL INJECTION
S/N 25Z684-835
S/N 25Z684-835
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SIS#SEBP15731111
7W-2063: PUMP GP-FUEL INJECTION
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4F-7226 | [1] | BOLT (7/16-14X4-IN) | |
2. | 7N-5487 | [1] | WASHER (12X22X9.5-MM THK) | |
3. | 1N-4910 | [1] | CLAMP-INJECTOR | |
4. | 7W-8668 | [1] | INJECTOR AS | |
2W-5200 | [1] | NUT AS-INJECTION VALVE | ||
5. | 7N-5325 | [1] | CHECK-INJECTION VALVE | |
6. | 7N-5307 | [1] | CAGE-INJ CHECK VALVE | |
7. | 7N-5321 | [1] | SPRING-FUEL VALVE | |
8. | 7N-5312 | [1] | CAGE-INJECTION SPRING | |
9. | 7W-2237 | [1] | FOLLOWER | |
10. | 7N-5319 | [1] | SEAT-VALVE SPRING | |
11. | 7N-5314 | [1] | DEFLECTOR-SPILL | |
12. | 7N-5317 | [1] | SPRING-STOP PIN | |
13. | 7N-5318 | [1] | RETAINER-PIN | |
14. | 7N-5322 | [1] | RETAINER-GEAR | |
15. | 7N-5315 | [1] | SEAL-INJECTOR | |
16. | 7W-2236 | [1] | BODY AS | |
17. | 7N-5309 | [1] | RACK AS-INJECTOR | |
18. | 7N-5313 | [1] | GEAR (23 TEETH) | |
19. | 7N-5320 | [1] | PIN-INJECTION STOP | |
20. | 7W-0296 | [1] | SPRING-INJECTOR | |
21. | 7W-1034 | [1] | PLUNGER AS | |
22. | 7W-8667 | [1] | TIP AS | |
23. | 6V-1250 | [1] | SEAL-O-RING | |
24. | 8J-8725 | [2] | SEAL-O-RING | |
25. | 8N-9944 | [1] | PLUG | |
(LETTERS H, M, & L DENOTE HIGH, MEDIUM, & LOW FLOW RANGE) | ||||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP15731112
9Y-0136: PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
S/N 25Z1619-2188
S/N 25Z1619-2188
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SIS#SEBP15731113
9Y-1796: PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
S/N 25Z684-2188
Type 1
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
AN ATTACHMENT
S/N 25Z684-2188
Type 1
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
AN ATTACHMENT
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SIS#SEBP15731114
9Y-1796: PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
S/N 25Z684-2188
Type 2
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
AN ATTACHMENT
S/N 25Z684-2188
Type 2
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
AN ATTACHMENT
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SIS#SEBP15731115
9Y-7841: PUMP GP-FUEL INJECTION
9Y-7841 PUMP GP-FUEL INJECTION
S/N 73Z287-594
S/N 73Z287-594
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SIS#SEBP15731116
9Y-7841: PUMP GP-FUEL INJECTION
9Y-7841 PUMP GP-FUEL INJECTION
S/N 73Z595-807
S/N 73Z595-807
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4P-9075 C | [1] | INJECTOR GP-FUEL | |
194-9584 | [2] | SEAL-O-RING | ||
5P-8065 | [1] | SEAL-O-RING | ||
6V-1250 | [1] | SEAL-O-RING | ||
2. | 1N-4910 | [1] | CLAMP-INJECTOR | |
3. | 4F-7226 | [1] | BOLT (7/16-14X4-IN) | |
4. | 7N-5487 | [1] | WASHER (12X22X9.5-MM THK) | |
5. | 234-4182 | [1] | PLUG | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP15731117
107-0165: PUMP GP-FUEL PRIMING
107-0165 PUMP GP-FUEL PRIMING
FOR USE WITH 106-9873 PUMP GP-ENGINE OIL
AN ATTACHMENT
FOR USE WITH 106-9873 PUMP GP-ENGINE OIL
AN ATTACHMENT
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4P-0693 | [10] | CLAMP AS | |
(EACH INCLUDES) | ||||
108-1434 | [2] | GROMMET | ||
2. | 7N-8599 Y | [1] | PUMP GP-FUEL PRIMING | |
3. | 9N-1752 | [1] | SPRING | |
4. | 107-0159 | [1] | TUBE AS | |
5. | 237-2715 | [1] | TUBE AS | |
6. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
7. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
8. | 1P-7625 | [1] | ELBOW | |
9. | 2H-9523 | [1] | GROMMET | |
10. | 3J-1907 | [1] | SEAL-O-RING | |
11. | 3K-0360 | [1] | SEAL-O-RING | |
12. | 4B-9782 | [1] | BALL | |
13. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
14. | 250-1496 | [1] | ELBOW | |
15. | 6V-4362 | [1] | CONNECTOR | |
16. | 6V-5049 | [1] | SEAL-O-RING | |
17. | 8N-3480 | [1] | CLIP | |
18. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
19. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
Y | SEPARATE ILLUSTRATION |
#SEBP15731118
107-0166: PUMP GP-FUEL PRIMING
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4P-0692 | [4] | CLAMP AS | |
(EACH INCLUDES) | ||||
108-1434 | [1] | GROMMET | ||
2. | 4P-0693 | [10] | CLAMP AS | |
(EACH INCLUDES) | ||||
108-1434 | [2] | GROMMET | ||
3. | 7N-8599 Y | [1] | PUMP GP-FUEL PRIMING | |
4. | 8N-6296 | [1] | TUBE AS | |
5. | 9N-1752 | [1] | SPRING | |
6. | 107-0159 | [1] | TUBE AS | |
7. | 250-1496 | [1] | ELBOW | |
8. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
9. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
10. | 1P-7625 | [1] | ELBOW | |
11. | 2H-9523 | [1] | GROMMET | |
12. | 3J-1907 | [1] | SEAL-O-RING | |
13. | 3K-0360 | [1] | SEAL-O-RING | |
14. | 4B-9782 | [1] | BALL | |
15. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
16. | 6V-4362 | [1] | CONNECTOR | |
17. | 7K-3377 | [2] | PIPE | |
18. | 8N-3480 | [1] | CLIP | |
19. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
Y | SEPARATE ILLUSTRATION |
#SEBP15731119
107-0169: PUMP GP-FUEL PRIMING
Parts for your 3516 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9Y-6094 | [1] | GASKET | |
2. | 9Y-8389 | [1] | GASKET | |
3. | 4P-0706 | [4] | CLAMP AS | |
4. | 2A-4781 | [1] | BOLT (1/4-20X2.75-IN) | |
5. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
6. | 1D-4540 | [1] | BOLT (5/16-18X2.75-IN) | |
7. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
8. | 4K-6297 | [1] | ELBOW | |
9. | 3J-1907 | [3] | SEAL-O-RING | |
10. | 9Y-4598 | [1] | ADAPTER-PUMP | |
11. | 107-0162 | [1] | TUBE AS | |
12. | 8T-0151 | [1] | ADAPTER | |
13. | 8M-0506 | [1] | ADAPTER-O-RING | |
14. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
061-7539 | [1] | SEAL-O-RING | ||
229-3218 | [2] | VALVE AS |
Information:
FUEL SYSTEM
PUMP GP-FUEL INJECTION
Engine News
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
1984/04/11
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
1986/01/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
1989/07/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
2008/12/01
Operation and Maintenance Manual
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Specifications
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Systems Operation
Information Release Memo
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Testing and Adjusting
Disassembly and Assembly
Service Magazine
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
1986/06/16
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
1977/02/14
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
1988/01/04
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
1989/06/26
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
1990/06/11
Caterpillar Parts SIS Catalog 3516 :
Truck sale:
719,892
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
298,989
500,000
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
- mobile generator sets
FOLEY EQUIPMENT COMPANY
500,000
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
- mobile generator sets
FOLEY EQUIPMENT COMPANY
800,000
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC