AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-0542 INSTALLATION GP-TURBOCHARGER S/N 29Z838-1119 PROVIDES A BELLOWS CONNECTION FIELD INSTALLATION 3516


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-AIR

MARINE ENGINE 3516 MARINE ENGINE 29Z
 3516 Marine Engine 29Z00818-01119 SEBP1574 3516 29Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7E-0685 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7W-3570 CARTRIDGE GP-TURBOCHARGER
INSTALLATION GP-TURBOCHARGER
9Y-0542 INSTALLATION GP-TURBOCHARGER
SHIELD GP-HEAT
278-4749 SHIELD GP-HEAT
SUPPORT GP-TURBOCHARGER
137-5553 SUPPORT GP-TURBOCHARGER
SUPPORT GP-TURBOCHARGER
137-5553 SUPPORT GP-TURBOCHARGER
 

#SEBP15740500
 

9Y-0542: INSTALLATION GP-TURBOCHARGER

9Y-0542 INSTALLATION GP-TURBOCHARGER
S/N 29Z838-1119
PROVIDES A BELLOWS CONNECTION
FIELD INSTALLATION
i00436916 SEBP1574
9Y0542 INSTALLATION GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4329 Y [2] TURBOCHARGER GP  
2. 0S-1595 [8] BOLT (1/2-13X1.25-IN)  
3. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1W-5505 [2] GASKET-MANIFOLD  
5. 0S-1594 [32] BOLT (3/8-16X1-IN)  
6. 5M-2894 [32] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7C-9234 [2] BELLOWS AS  
8. 7C-9235 [2] LINER  
9. 1W-7587 [4] GASKET  
10. 7C-9923 [1] ELBOW-EXHAUST  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15740501
 

191-8390: LINES GP-AIR

191-8390 LINES GP-AIR -PRELUBRICATION PUMP
S/N 72Z339-470
AN ATTACHMENT
i01426545 SEBP1574
1918390 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3940 [1] ELBOW  
2. 2H-9091 [1] CONNECTOR-PIPE  
3. 3N-4829 I [1] HOSE AS  
4. 7W-0522 Y [1] LUBRICATOR GP-AIR MOTOR  
5. 191-8389 I [1] HOSE AS  
6. 002-6453 [2] ELBOW  
7. 3B-7272 [1] NIPPLE-PIPE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP15740502
 

2W-9595: LINES GP-AIR

2W-9595 LINES GP-AIR
S/N 72Z339-359
i00361400 SEBP1574
2W9595 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1453 [1] ELBOW-EXHAUST  
2. 2W-1640 [1] BRACKET  
3. 0L-1329 [2] BOLT (1/2-13X3-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 2W-9584 [1] PIPE  
5. 1W-1250 [4] COVER  
6. 5M-2894 C [196] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4J-4382 [2] PLUG-PIPE  
8. 6V-3917 [4] SEAL-O-RING  
9. 2W-9585 [1] PIPE  
10. 1W-5956 [2] FLANGE  
11. 1W-5957 [2] GASKET  
12. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
13. 4W-6964 [2] BRACKET  
14. 1A-2029 [64] BOLT (3/8-16X1.125-IN)  
15. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
16. 0S-1619 [2] BOLT (3/8-16X3-IN)  
  8M-7145 [2] WASHER (10.2X28.5X5-MM THK)  
17. 6V-5167 [4] SEAL-O-RING  
18. 7N-5079 [16] ELBOW  
  6V-5504 [16] SEAL-O-RING  
19. 7N-5089 [16] GASKET  
20. 5P-0076 [128] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
21. 5M-6213 [3] PLUG-PIPE (1/4-18-THD)  
22. 4W-0715 [1] MANIFOLD-INLET  
23. 1W-1251 [8] GASKET  
24. 7N-5085 [16] FLANGE  
  7N-5080 [16] GASKET-MANIFOLD  
25. 0L-1351 C [2] BOLT (3/8-16X0.875-IN)  
26. 7W-1944 C [2] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15740503
 

4W-0713: LINES GP-AIR

4W-0713 LINES GP-AIR
S/N 29Z818-857
i00378369 SEBP1574
4W0713 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6356 [1] GASKET  
2. 4W-6964 C [2] BRACKET  
3. 5M-2894 C [196] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-5166 [4] SEAL-O-RING  
5. 2W-5211 [1] PIPE  
6. 6V-5167 [4] SEAL-O-RING  
7. 0T-0573 C [4] BOLT (3/8-16X2.75-IN)  
8. 1W-5956 [2] FLANGE  
9. 5M-6213 [3] PLUG-PIPE (1/4-18-THD)  
10. 4W-0715 [1] MANIFOLD-INLET  
11. 1W-1251 [8] GASKET  
12. 5P-0076 [128] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
13. 7N-5079 [16] ELBOW  
14. 6V-5504 [16] SEAL-O-RING  
15. 7N-5089 [16] GASKET  
16. 7N-5085 [16] FLANGE  
17. 7N-5080 [16] GASKET-MANIFOLD  
18. 0S-1594 [4] BOLT (3/8-16X1-IN)  
19. 1W-5957 [2] GASKET  
20. 2W-5212 [1] PIPE  
21. 0L-1329 [2] BOLT (1/2-13X3-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 2W-1640 [1] BRACKET  
23. 4J-4382 [3] PLUG-PIPE  
24. 1W-5532 [1] ELBOW-EXHAUST  
25. 1A-2029 C [60] BOLT (3/8-16X1.125-IN)  
26. 0S-1619 C [2] BOLT (3/8-16X3-IN)  
  8M-7145 C [2] WASHER (10.2X28.5X5-MM THK)  
27. 3V-3308 C [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
28. 0S-0509 C [2] BOLT (3/8-16X0.75-IN)  
  9Y-0195 C [2] RETAINER  
29. 1W-1250 C [4] COVER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15740504
 

4W-0714: LINES GP-AIR

4W-0714 LINES GP-AIR
S/N 72Z339-342
i00378375 SEBP1574
4W0714 LINES GP-AIR Parts scheme 4W0714 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5700 [2] SEAL-O-RING  
2. 1N-4029 [1] PIPE (LH)  
3. 7N-4895 [1] GASKET  
4. 7N-4897 [1] FLANGE  
5. 5P-0076 [64] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
6. [2] SEAL  
7. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
8. 5M-6213 [3] PLUG-PIPE (1/4-18-THD)  
9. 4W-0716 [1] MANIFOLD-AIR INLET  
10. 1A-2029 [12] BOLT (3/8-16X1.125-IN)  
11. 5M-2894 [79] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 6V-5504 [16] SEAL-O-RING  
13. 2W-6009 [1] GASKET  
14. 7N-5079 [16] ELBOW  
  7N-5085 [16] FLANGE  
  7N-5080 [16] GASKET-MANIFOLD  
15. 5L-3773 [1] GASKET-EXHAUST ELBOW  
16. 7N-5089 [16] GASKET  
17. 4W-1453 [1] ELBOW-EXHAUST  
18. 0L-1329 [2] BOLT (1/2-13X3-IN)  
19. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 5P-0076 [64] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
21. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
22. 4J-4382 [2] PLUG-PIPE  
23. 5P-5700 [2] SEAL-O-RING  
24. 2W-1640 [1] BRACKET  
25. 5M-2894 [77] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 1N-4028 [1] PIPE (R.H.)  
27. 0S-1594 [4] BOLT (3/8-16X1-IN)  
28. 7N-4896 [2] BRACKET  
29. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
30. 6V-2695 [2] SEAL-O-RING  
31. 7N-4897 [1] FLANGE  
  7N-4895 [1] GASKET  
32. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
 

#SEBP15740505
 

5N-8354: LINES GP-AIR

5N-8354 LINES GP-AIR -PRELUBRICATION PUMP
AN ATTACHMENT
i00388177 SEBP1574
5N8354 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8353 I [1] HOSE AS  
2. 5N-8352 I [1] HOSE AS  
3. 2H-3940 [1] ELBOW  
4. 002-6453 [2] ELBOW  
5. 2H-9091 C [1] CONNECTOR-PIPE  
6. 3B-7272 [1] NIPPLE-PIPE  
7. 7W-0522 C [1] LUBRICATOR GP-AIR MOTOR  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP15740506
 

7C-4168: LINES GP-AIR

7C-4168 LINES GP-AIR
PRELUBRICATION INLET AND EXHAUST
FOR USE WITH AIR START LINES
AN ATTACHMENT
i00406464 SEBP1574
7C4168 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-5580 [1] U-BOLT  
  5S-0003 [2] NUT (5/16-18-THD)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
2. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 0S-1594 [1] BOLT (3/8-16X1-IN)  
  9S-8752 [1] NUT-FULL (3/8-16-THD)  
4. 2H-3940 [3] ELBOW  
5. 7W-0522 [1] LUBRICATOR GP-AIR MOTOR  
6. 3S-8665 [3] CLIP (LOOP)  
7. 7C-2972 [1] BRACKET  
8. 3B-7272 [1] NIPPLE-PIPE  
9. 3N-4811 I [1] HOSE AS  
10. 7D-1001 [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP15740507
 

7C-9931: LINES GP-AIR

7C-9931 LINES GP-AIR
S/N 29Z858-929
i00395251 SEBP1574
7C9931 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-5265 [1] BRACKET  
2. 4W-6964 [1] BRACKET  
3. 5M-2894 [196] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-5166 [4] SEAL-O-RING  
5. 2W-5211 [1] PIPE  
6. 6V-5167 [4] SEAL-O-RING  
7. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
8. 1W-5956 [2] FLANGE  
9. 5M-6213 [3] PLUG-PIPE (1/4-18-THD)  
10. 4W-0715 [1] MANIFOLD-INLET  
11. 1W-1251 [8] GASKET  
12. 5P-0076 [128] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
13. 7N-5079 [16] ELBOW  
14. 6V-5504 [16] SEAL-O-RING  
15. 7N-5089 [16] GASKET  
16. 7N-5085 [16] FLANGE  
17. 7N-5080 [16] GASKET-MANIFOLD  
18. 0S-1594 [4] BOLT (3/8-16X1-IN)  
19. 1W-5957 [2] GASKET  
20. 7C-3604 [1] PIPE  
21. 0L-1329 [2] BOLT (1/2-13X3-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 2W-1640 [1] BRACKET  
23. 4J-4382 [3] PLUG-PIPE  
24. 7C-9922 [1] ELBOW-EXHAUST  
25. 1A-2029 [60] BOLT (3/8-16X1.125-IN)  
26. 0S-1619 [2] BOLT (3/8-16X3-IN)  
  8M-7145 [2] WASHER (10.2X28.5X5-MM THK)  
27. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
28. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
  9Y-0195 [2] RETAINER  
29. 1W-1250 [4] COVER  
 

#SEBP15740508
 

7C-9931: LINES GP-AIR

7C-9931 LINES GP-AIR
S/N 29Z930-1119
i00395253 SEBP1574
7C9931 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1250 [4] COVER  
2. 1W-1251 [8] GASKET  
3. 2W-1640 [1] BRACKET  
4. 2W-5211 [1] PIPE  
5. 4W-0715 [1] MANIFOLD-INLET  
6. 4W-6964 [1] BRACKET  
7. 9S-8752 C [12] NUT-FULL (3/8-16-THD)  
8. 8T-6765 [3] PLUG-PIPE (1/4-18-THD)  
9. 7C-3604 [1] PIPE  
10. 7C-9922 [1] ELBOW-EXHAUST  
11. 7E-8550 C [2] FLANGE  
12. 7N-5080 [16] GASKET-MANIFOLD  
13. 7N-5085 [16] FLANGE  
14. 7N-5089 [16] GASKET  
15. 9Y-0195 [2] RETAINER  
16. 9Y-5265 [1] BRACKET  
17. 134-3804 [16] ELBOW  
18. 8M-7145 [2] WASHER (10.2X28.5X5-MM THK)  
19. 0L-1329 [2] BOLT (1/2-13X3-IN)  
20. 6V-5167 [4] SEAL-O-RING  
21. 0S-1594 [2] BOLT (3/8-16X1-IN)  
22. 0S-1619 [2] BOLT (3/8-16X3-IN)  
23. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
24. 1A-2029 C [64] BOLT (3/8-16X1.125-IN)  
25. 3J-5389 C [3] PLUG (EXTERNAL)  
26. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
27. 5M-2894 C [208] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-0076 [128] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
29. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 6V-3319 C [2] SEAL-O-RING  
31. 6V-5101 [16] SEAL-O-RING  
32. 6V-5166 [4] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15740509
 

9Y-5599: LINES GP-AIR

9Y-5599 LINES GP-AIR
S/N 72Z360-408
i00444015 SEBP1574
9Y5599 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-5584 [1] ELBOW-EXHAUST  
2. 2W-1640 [1] BRACKET  
3. 0L-1329 [2] BOLT (1/2-13X3-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 2W-9584 [1] PIPE  
5. 1W-1250 [4] COVER  
6. 5M-2894 [196] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4J-4382 [2] PLUG-PIPE  
8. 6V-3917 [4] SEAL-O-RING  
9. 2W-9585 [1] PIPE  
10. 1W-5956 [2] FLANGE  
11. 1W-5957 [2] GASKET  
12. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
13. 4W-6964 [2] BRACKET  
14. 1A-2029 [64] BOLT (3/8-16X1.125-IN)  
15. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
16. 0S-1619 [2] BOLT (3/8-16X3-IN)  
  8M-7145 [2] WASHER (10.2X28.5X5-MM THK)  
17. 6V-5167 [4] SEAL-O-RING  
18. 7N-5079 [16] ELBOW  
  6V-5504 [16] SEAL-O-RING  
19. 7N-5089 [16] GASKET  
20. 5P-0076 [128] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
21. 5M-6213 [3] PLUG-PIPE (1/4-18-THD)  
22. 4W-0715 [1] MANIFOLD-INLET  
23. 1W-1251 [8] GASKET  
24. 7N-5085 [16] FLANGE  
  7N-5080 [16] GASKET-MANIFOLD  
25. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
26. 7W-1944 [2] RETAINER  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
"Off-Size" Bearing Kits Available
1991/10/01
New Exhaust Bellows Used In Turbocharger Group
1992/06/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Turbocharger Supports Help Prevent Watercooled Exhaust Manifold Cracking{1059,1052}
1999/05/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
2012/02/01
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
2014/09/12
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Accumulator
3500 Marine Engines
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Systems Operation
Turbocharger
3500 Marine Engines
Accumulator
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Accumulator Pressure - Test
3500 Marine Engines
Disassembly and Assembly
Turbochargers (TW81, TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbocharger (W153)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW81)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (W153)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
New Exhaust Bellows Used In Turbocharger Group{1052}
1992/06/15
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

INDICATOR GP-AIR FILTER CHANGE
7N-6782 INDICATOR GP-AIR FILTER CHANGE
FLANGE GP-EXHAUST
7N-6963 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
7N-6962 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
7N-6961 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
2W-7871 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
2W-7866 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
2W-7756 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
1W-9488 FLANGE GP-EXHAUST
LINES GP-AIR
191-8390 LINES GP-AIR
LINES GP-AIR
2W-9595 LINES GP-AIR
LINES GP-AIR
4W-0713 LINES GP-AIR
LINES GP-AIR
4W-0714 LINES GP-AIR
LINES GP-AIR
5N-8354 LINES GP-AIR
LINES GP-AIR
7C-4168 LINES GP-AIR
LINES GP-AIR
7C-9931 LINES GP-AIR
LINES GP-AIR
7C-9931 LINES GP-AIR

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.