AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-8431 CARTRIDGE GP-TURBOCHARGER S/N 68Z694-1092 PART OF 1W-8429, 1W-8430 TURBOCHARGER GP AN ATTACHMENT 3508


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-EXHAUST

INDUSTRIAL ENGINE 3508 INDUSTRIAL ENGINE 68Z
 3508 Industrial Engine 68Z00694-01092 SEBP1575 3508 68Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
118-2988 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
1W-1653 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
1W-8431 CARTRIDGE GP-TURBOCHARGER
450-1415 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7C-3823 CARTRIDGE GP-TURBOCHARGER
 

#SEBP15750610
 

1W-8431: CARTRIDGE GP-TURBOCHARGER

1W-8431 CARTRIDGE GP-TURBOCHARGER
S/N 68Z694-1092
PART OF 1W-8429, 1W-8430 TURBOCHARGER GP
AN ATTACHMENT
i00353844 SEBP1575
1W8431 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0819 [1] PLATE AS-BACKING  
2. 1P-1120 J [1] RING-SEAL  
3. 6N-5004 J [1] BEARING-THRUST  
4. 9N-3701 [1] SHROUD  
5. 6N-6611 [1] WHEEL & SHAFT AS  
6. 7N-3759 J [1] RING-PISTON  
7. 9M-8915 J [1] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9M-8919 J [2] RING-SEAL  
11. 9N-2046 J [1] SPACER-THRUST  
12. 3S-4484 J [1] LOCKNUT-TURBOCHARGER (5/16-24-THD)  
13. 9N-6278 [1] WHEEL-COMPRESSOR  
14. 0S-1616 J [4] BOLT (1/4-20X1-IN)  
15. 9N-2036 J [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  1N-4481 J [1] KIT-CARTRIDGE  
  9N-2041 [1] KIT-BEARING  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP15750611
 

450-1415: CARTRIDGE GP-TURBOCHARGER

450-1415 CARTRIDGE GP-TURBOCHARGER
S/N 95Y644-1064
PART OF 450-1421 TURBOCHARGER GP
AN ATTACHMENT
i06998939 SEBP1575
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  496-5224 [2] BEARING-JOURNAL  
  496-5225 [2] BEARING-JOURNAL  
  496-5226 [2] BEARING-JOURNAL  
  496-5227 [2] BEARING-JOURNAL  
  496-5228 [2] BEARING-JOURNAL  
  496-5229 [2] BEARING-JOURNAL  
  211-2261 [1] BEARING-THRUST  
  4P-3819 M [4] BOLT (M6X1X22-MM)  
  223-4291 [1] COLLAR-THRUST  
  9M-8915 [3] RING-RETAINING  
  1P-1120 [1] RING-SEAL  
  9M-8919 [2] RING-SEAL  
  223-4289 [1] SEAL RING-PISTON  
  461-3792 [3] WASHER (WEAR)  
  M   METRIC PART
 

#SEBP15750612
 

6N-7960: CARTRIDGE GP-TURBOCHARGER

6N-7960 CARTRIDGE GP-TURBOCHARGER
S/N 95Y644-997
PART OF 1W-6551, 1W-8432, 7W-8008, 7W-8010, 7W-8011 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00389272 SEBP1575
6N7960 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7962 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 9Y-1936 [1] SHROUD  
6. 9N-2043 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 C [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 4P-3429 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
    (KIT INCLUDES TWO BEARINGS)
  7C-7446 AB KIT-BEARING (0.51-MM OS)  
  7C-7447 AB KIT-BEARING (0.51-MM OS, 0.25-MM US)  
  7N-3194 AB KIT-BEARING (0.25-MM OS, 0.25-MM US)  
  8N-4157 AB KIT-BEARING (0.25-MM OS)  
  8N-4160 AB KIT-BEARING (0.25-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15750613
 

7C-3823: CARTRIDGE GP-TURBOCHARGER

7C-3823 CARTRIDGE GP-TURBOCHARGER
S/N 68Z717-1092
PART OF 107-7305, 7C-3820, 7C-3822 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00406043 SEBP1575
7C3823 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4130 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 9Y-1935 C [1] SHROUD  
6. 2W-4131 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 7C-3826 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
14. 2F-0808 C [2] SCREW (6X0.25-IN)  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 C [1] KIT-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP15750614
 

7C-3824: CARTRIDGE GP-TURBOCHARGER

7C-3824 CARTRIDGE GP-TURBOCHARGER
S/N 68Z694-1092
PART OF 7C-3821 TURBOCHARGER GP
AN ATTACHMENT
i00406047 SEBP1575
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  461-3753 [2] BEARING-JOURNAL (0.51-MM OS)  
  461-3756 [2] BEARING-JOURNAL (0.25-MM US)  
  461-3761 [2] BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  461-3766 [2] BEARING-JOURNAL (0.25-MM OS)  
  461-3777 [2] BEARING-JOURNAL (0.25-MM US, 0.51-MM OS)  
  461-3781 [2] BEARING-JOURNAL (STANDARD)  
  6N-5004 [1] BEARING-THRUST  
  031-5085 [4] BOLT-LOCKING (1/4-20X1-IN)  
  9M-8911 [1] COLLAR-THRUST  
  1S-1770 [1] LOCKNUT-TURBOCHARGER  
  9N-2036 [4] PLATE-LOCK  
  7N-3759 [1] RING-PISTON  
  9M-8915 [3] RING-RETAINING  
  9M-8919 [2] RING-SEAL  
  1P-1120 [1] RING-SEAL  
  2F-0808 [2] SCREW (6X0.25-IN)  
  9N-2046 [1] SPACER-THRUST  
  461-3792 [3] WASHER (WEAR)  
 

#SEBP15750615
 

7W-8014: CARTRIDGE GP-TURBOCHARGER

7W-8014 CARTRIDGE GP-TURBOCHARGER
S/N 68Z694-716
PART OF 7W-8012, 7W-9565 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00416086 SEBP1575
7W8014 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4130 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 2W-4132 [1] SHROUD-HEAT  
6. 2W-4131 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 7W-8015 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
 

#SEBP15750616
 

7W-8017: CARTRIDGE GP-TURBOCHARGER

7W-8017 CARTRIDGE GP-TURBOCHARGER
S/N 68Z694-1092
PART OF 7W-8016 TURBOCHARGER GP
AN ATTACHMENT
i00416097 SEBP1575
7W8017 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4130 [1] PLATE AS-BACKING (COMPRESSOR)  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 9N-3701 [1] SHROUD  
6. 2W-4131 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 7W-8015 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
 

#SEBP15750617
 

9N-5263: CARTRIDGE GP-TURBOCHARGER

9N-5263 CARTRIDGE GP-TURBOCHARGER
S/N 95Y644-1064
PART OF 1W-5261, 1W-5262 TURBOCHARGER GP
AN ATTACHMENT
i00438172 SEBP1575
9N5263 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7962 [1] PLATE AS-BACKING  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 9N-3701 [1] SHROUD  
6. 9N-2043 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 C [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 9N-3674 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15750618
 

7W-0288: ELBOW GP-EXHAUST

7W-0288 ELBOW GP-EXHAUST
WATERCOOLED
AN ATTACHMENT
i00431196 SEBP1575
7W0288 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-4302 [2] COLLAR-SEAL  
2. 1W-5941 [1] COVER  
3. 1W-6737 [1] HOUSING  
4. 1W-9451 [2] SEAL-TURBOCHARGER  
6. 5P-0599 [2] CLAMP-BAND  
7. 7E-6016 [2] GASKET  
8. 7E-6017 [1] COVER  
9. 7N-3368 [1] GASKET  
10. 7N-6222 [2] ADAPTER-TURBOCHARGER  
11. 7N-7130 [1] TUBE AS  
12. 7N-7415 [1] FITTING  
13. 7W-0290 [1] ELBOW AS-EXHAUST  
  4F-5695 [3] PLUG-CUP  
14. 8N-8954 [1] TUBE AS  
15. 009-4440 [1] CONNECTOR  
16. 0S-1594 [7] BOLT (3/8-16X1-IN)  
17. 2A-4639 [4] BOLT (3/8-16X1.625-IN)  
18. 2P-1312 [1] ELBOW  
19. 3B-0551 [1] PLUG-PIPE  
20. 3J-5389 [2] PLUG (EXTERNAL)  
21. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 7L-4773 [2] SEAL-O-RING  
 

#SEBP15750619
 

8N-8487: ELBOW GP-EXHAUST

8N-8487 ELBOW GP-EXHAUST
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
i00415396 SEBP1575
8N8487 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
2. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
4. 6N-4857 [1] FITTING  
5. 8N-8447 [1] ELBOW  
6. 8N-8452 [1] GASKET  
7. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Improved Turbocharger Water Lines are Used {1052, 1059, 1380}
2004/07/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Industrial Engines
Turbocharger
3500 Industrial Engines
Turbocharger
3500 Industrial Engines
Systems Operation
Turbocharger
3500 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
TURBOCHARGERS
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3508)
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3512)
3500 INDUSTRIAL ENGINE
Turbochargers
3500 INDUSTRIAL ENGINE
Turbochargers (3508)
3500 INDUSTRIAL ENGINE
Turbochargers (3512)
3500 INDUSTRIAL ENGINE
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3508 :

CARTRIDGE GP-TURBOCHARGER
1W-1653 CARTRIDGE GP-TURBOCHARGER
118-2988 CARTRIDGE GP-TURBOCHARGER
AIR CLEANER GP
8N-9303 AIR CLEANER GP
AIR CLEANER GP
8N-9302 AIR CLEANER GP
AIR CLEANER GP
8N-3378 AIR CLEANER GP
AIR CLEANER GP
5N-8728 AIR CLEANER GP
5N-8602 AIR CLEANER GP
AIR CLEANER GP
5N-7822 AIR CLEANER GP
450-1415 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7C-3823 CARTRIDGE GP-TURBOCHARGER
7C-3824 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7W-8014 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7W-8017 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9N-5263 CARTRIDGE GP-TURBOCHARGER
ELBOW GP-EXHAUST
7W-0288 ELBOW GP-EXHAUST

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.