AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T6879 CYLINDER GP-SWING-L.H. SERIAL NO. 5PC1-1091 101.6 MM (4 IN.) BORE X 233 MM (9 IN.) STROKE 9T716-PAGE 254 416


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
VALVE GP-RELIEF
CYLINDER GP

BACKHOE LOADER 416 BACKHOE LOADER 5PC
 416 BACKHOE LOADER 5PC00001-06191 (MACHINE) POWERED BY T4.236 DIESEL ENGINE SEBP1576 416 5PC   (1985)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
4T-6878 CYLINDER GP-BOOM
CYLINDER GP-BOOM
9T-5219 CYLINDER GP-BOOM
CYLINDER GP-SWING-LH
4T-6879 CYLINDER GP-SWING-LH
CYLINDER GP-SWING-LH
4T-6879 CYLINDER GP-SWING-LH
CYLINDER GP-SWING-RH
9T-0529 CYLINDER GP-SWING-RH
CYLINDER GP-SWING-RH
9T-0529 CYLINDER GP-SWING-RH
 

#SEBP15760360
 

4T-6879: CYLINDER GP-SWING-LH

4T6879 CYLINDER GP-SWING-L.H.
SERIAL NO. 5PC1-1091
101.6 MM (4 IN.) BORE X 233 MM (9 IN.) STROKE
9T716-PAGE 254
c341779 SEBP1576
4T6879 CYLINDER GP-SWING-LH Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-7356 R [1] ROD AS  
2. 9R-1496 [2] BEARING  
3. 2H-3934 [1] SEAL  
4. 1K-7098 [1] RING-BACK-UP  
5. 4T-6889 [1] HEAD  
6. 4T-6128 [1] RING  
7. 4T-6127 [1] SEAL  
8. 4T-6126 [1] SEAL  
9. 4T-6125 [1] SEAL  
10. 9T-0716 Y [1] VALVE GP  
11. 4K-0684 [1] WASHER-HARD  
12. 6J-2797 [1] RING-WEAR  
13. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
14. 4T-7354 [1] PISTON  
15. 9T-1115 [1] PLUNGER  
16. 2P-5755 [1] SPRING  
17. 4T-7347 R [1] CYLINDER AS  
18. 4T-7351 [2] BEARING  
19. 4T-7384 [1] BOLT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15760361
 

4T-6879: CYLINDER GP-SWING-LH

4T6879 CYLINDER GP-SWING-L.H.
SERIAL NO. 5PC1092-UP
101.6 MM (4 IN.) BORE X 233 MM (9 IN.) STROKE
9T4752-PAGE 254.01
c347158 SEBP1576
4T6879 CYLINDER GP-SWING-LH Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-7356 R [1] ROD AS  
2. 9R-1496 [2] BEARING  
3. 2H-3934 J [1] SEAL  
4. 1K-7098 J [1] RING-BACK-UP  
5. 4T-6889 [1] HEAD  
6. 4T-6128 J [1] RING  
7. 4T-6127 J [1] SEAL  
8. 4T-6126 J [1] SEAL  
9. 4T-6125 J [1] SEAL  
10. 9T-4752 CY [1] VALVE GP-RELIEF  
11. 4K-0684 [1] WASHER-HARD  
12. 6J-2797 J [1] RING-WEAR  
13. 5J-5402 J [1] SEAL AS  
  5J-5400 [1] SEAL  
14. 4T-7354 [1] PISTON  
15. 9T-1115 [1] PLUNGER  
16. 2P-5755 [1] SPRING  
17. 4T-7347 R [1] CYLINDER AS  
18. 4T-7351 [2] BEARING  
19. 4T-7384 [1] BOLT  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3593 C [1] KIT-SEAL (INCL PARTS MARKED J)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15760362
 

9T-0529: CYLINDER GP-SWING-RH

9T0529 CYLINDER GP-SWING-R.H.
SERIAL NO. 5PC1-1091
101.6 MM (4 IN.) BORE X 233 MM (9 IN.) STROKE
9T716-PAGE 254
c341781 SEBP1576
9T0529 CYLINDER GP-SWING-RH Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-7356 R [1] ROD AS  
2. 9R-1496 [2] BEARING  
3. 2H-3934 [1] SEAL  
4. 1K-7098 [1] RING-BACK-UP  
5. 4T-6889 [1] HEAD  
6. 4T-6128 [1] RING  
7. 4T-6127 [1] SEAL  
8. 4T-6126 [1] SEAL  
9. 4T-6125 [1] SEAL  
10. 9T-0716 Y [1] VALVE GP  
11. 4K-0684 [1] WASHER-HARD  
12. 6J-2797 [1] RING-WEAR  
13. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
14. 4T-7354 [1] PISTON  
15. 9T-1115 [1] PLUNGER  
16. 2P-5755 [1] SPRING  
17. 9T-0528 R [1] CYLINDER AS  
18. 4T-7351 [2] BEARING  
19. 4T-7384 [1] BOLT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15760363
 

9T-0529: CYLINDER GP-SWING-RH

9T0529 CYLINDER GP-SWING-R.H.
SERIAL NO. 5PC1092-UP
101.6 MM (4 IN.) BORE X 233 (9 IN.) STROKE
9T4752-PAGE 254.01
c347154 SEBP1576
9T0529 CYLINDER GP-SWING-RH Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-7356 R [1] ROD AS  
2. 9R-1496 [2] BEARING  
3. 2H-3934 [1] SEAL  
4. 1K-7098 [1] RING-BACK-UP  
5. 4T-6889 [1] HEAD  
6. 4T-6128 [1] RING  
7. 4T-6127 [1] SEAL  
8. 4T-6126 [1] SEAL  
9. 4T-6125 [1] SEAL  
10. 9T-4752 CY [1] VALVE GP-RELIEF  
11. 4K-0684 [1] WASHER-HARD  
12. 6J-2797 [1] RING-WEAR  
13. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
14. 4T-7354 [1] PISTON  
15. 9T-1115 [1] PLUNGER  
16. 2P-5755 [1] SPRING  
17. 9T-0528 R [1] CYLINDER AS  
18. 4T-7351 [2] BEARING  
19. 4T-7384 [1] BOLT  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3593 [1] KIT-SEAL (HYD CYL)  
    (INCLUDES RINGS,
    SEALS AND SEAL AS)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15760364
 

9T-0716: VALVE GP

9T0716 VALVE GP-RELIEF-SWING CYLINDER
SERIAL NO. 5PC1-1091
PART OF 4T6879 & 9T529 CYLINDERS
c341814 SEBP1576
9T0716 VALVE GP Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5019 [1] NUT-JAM  
2. 9T-0785 [1] VALVE  
3. 9T-1996 [1] BODY AS  
4. 5P-7857 [1] RING-BACK UPPER  
5. 5P-3108 [1] SEAL-O-RING  
6. 3K-0360 [2] SEAL-O-RING  
7. 2J-6089 [1] SPRING  
8. 9T-1965 [1] RETAINER AS  
 

#SEBP15760365
 

9T-4752: VALVE GP-RELIEF

9T4752 VALVE GP-RELIEF-SWING CYLINDER
SERIAL NO. 5PC1092-UP
PART OF 4T6879 & 9T529 CYLINDERS
c347150 SEBP1576
9T4752 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5019 [1] NUT-JAM  
2. 9T-4751 [1] VALVE  
3. 9T-1996 [1] BODY AS  
4. 5P-7857 [1] RING-BACK UPPER  
5. 5P-3108 [1] SEAL-O-RING  
6. 3K-0360 [2] SEAL-O-RING  
7. 2J-6089 [1] SPRING  
8. 9T-1965 [1] RETAINER AS  
9. 3J-7470 [1] SHIM 1.22MM(.048IN)THK  
 

#SEBP15760366
 

4T-6877: CYLINDER GP-STICK

4T6877 CYLINDER GP-STICK
101.6 MM (4 IN.) BORE X 839 MM (33 IN.) STROKE
S/N 5PC1-3107
c341778 SEBP1576
4T6877 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6888 [1] ROD AS  
2. 9R-0320 [2] BEARING  
3. 4T-6125 J [1] SEAL  
4. 4T-6126 J [1] SEAL  
5. 4T-6127 J [1] SEAL  
6. 4T-6128 J [1] RING  
7. 4T-6889 [1] HEAD  
8. 1K-7098 J [1] RING-BACK-UP  
9. 2H-3934 J [1] SEAL  
10. 4T-6890 [1] PISTON  
11. 5J-5402 [1] SEAL AS  
  5J-5400 J [1] SEAL  
12. 6J-2797 J [1] RING-WEAR  
13. 5P-8250 [1] WASHER  
14. 7J-5639 [1] BOLT-SELF LOCKING  
15. 4T-6893 [1] CYLINDER AS  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3593 [1] KIT-SEAL (INCL PARTS MARKED J)  
 

#SEBP15760367
 

9T-5216: CYLINDER GP-STICK

9T5216 CYLINDER GP-STICK
S/N 5PC3108-4506
101.6MM (4 IN.) BORE X 839MM (33 IN.) STROKE
c347216 SEBP1576
9T5216 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6888 [1] ROD AS  
2. 9R-0320 [2] BEARING  
3. 4T-6125 [1] SEAL  
4. 4T-6126 [1] SEAL  
5. 4T-6127 [1] SEAL  
6. 4T-6128 [1] RING  
7. 4T-6889 [1] HEAD  
8. 1K-7098 [1] RING-BACK-UP  
9. 2H-3934 [1] SEAL  
10. 4T-6890 [1] PISTON  
11. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
12. 6J-2797 [1] RING-WEAR  
13. 5P-8250 [1] WASHER  
14. 7J-5639 [1] BOLT-SELF LOCKING  
15. 9T-5215 R [1] CYLINDER AS  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15760368
 

9T-7063: CYLINDER GP-STICK

9T7063 CYLINDER GP-STICK
102MM (4 IN.) BORE X 839MM (33 IN.) STROKE
S/N 5PC4507-UP
c487020 SEBP1576
9T7063 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7064 R [1] ROD AS  
2. 9R-0320 [2] BEARING  
3. 4T-6125 [1] SEAL  
4. 4T-6126 [1] SEAL  
5. 4T-6127 [1] SEAL  
6. 4T-6128 [1] RING  
7. 4T-6889 [1] HEAD  
8. 1K-7098 [1] RING-BACK-UP  
9. 2H-3934 [1] SEAL  
10. 4T-7354 [1] PISTON  
11. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
12. 6J-2797 [1] RING-WEAR  
13. 4K-0684 [1] WASHER-HARD  
14. 7F-6112 [1] BOLT  
15. 9T-5215 R [1] CYLINDER AS  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15760369
 

4T-6880: CYLINDER GP-STABILIZER-RH

4T6880 CYLINDER GP-STABILIZER-R.H.
S/N 5PC1-4363, 4385-4393
101.6MM (4 IN.) BORE X 560MM (22 IN.) STROKE
c341776 SEBP1576
4T6880 CYLINDER GP-STABILIZER-RH Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6950 [1] ROD AS  
2. 9R-0321 [2] BEARING  
3. 4T-6125 J [1] SEAL  
4. 4T-6126 J [1] SEAL  
5. 4T-6127 J [1] SEAL  
6. 4T-6128 J [1] RING  
7. 4T-6889 [1] HEAD  
8. 1K-7098 J [1] RING-BACK-UP  
9. 2H-3934 J [1] SEAL  
10. 4T-6890 [1] PISTON  
11. 5J-5402 [1] SEAL AS  
  5J-5400 J [1] SEAL  
12. 6J-2797 J [1] RING-WEAR  
13. 5P-8250 [1] WASHER  
14. 7J-5639 [1] BOLT-SELF LOCKING  
15. 4T-6944 R [1] CYLINDER AS  
16. 9R-0321 [2] BEARING  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3593 [1] KIT-SEAL (INCL PARTS MARKED J)  
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation Of Stabilizer Mounted 9R3280 Cylinder Guard Group{6505}
Installation Of Stabilizer Mounted 9R3280 Cylinder Guard Group{6505}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Australia
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-CFEL
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-CSARL
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Americas
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Brazil
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Tilt Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Stabilizer Cylinder (RH & LH)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Boom Cylinders
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Swing Cylinders (RH & LH)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Relief Valve For Swing Cylinders
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Backhoe Bucket Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Stick Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Extendable Stick Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Extendable Stick Backhoe Bucket Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Multipurpose Bucket Clamp Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Asia
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Bucket Tilt Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Loader Lift Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Multi-Purpose Bucket Cylinder (428)
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Boom Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stick Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Boom And Stick Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Backhoe Bucket Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stick, Extendable Stick, Extendable Stick Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Extendable Stick Cylinder And Backhoe Bucket Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Swing Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizer Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizers
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Sideshift Assembly
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizer Cylinders (428)
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Service Magazine
Larger Radius Now Used Between Pin Boss And Web On Stabilizer Assemblies {6505}
1986/12/01
New Bucket Tilt Cylinder Prevents Tube Assembly Damage{5104}
1987/03/16
New Bucket Tilt Cylinder And Tilt Cylinder Tube Assemblies Used{5057,5104}
1987/07/13
New Stabilizer Guards Prevent Boom Cylinder Damage{6505,5456}
1987/11/02
New Stabilizer Cylinders Have Larger Rod Bolts{5468}
1987/11/16
Improved Boom Control{5105,6506}
1987/12/14
New Bearing In Rod End Of Swing Cylinders{5105}
1987/12/21
Larger Piston Retaining Bolt Used In Certain Hydraulic Cylinders {5458,5468}
1988/09/26
Improved Boom Cylinder Lines {5057,5456}
1988/12/26
Procedure To Reinforce Boom Cylinder Mounting Bosses{6501,5456}
1989/01/30
New Specifications For Checking Cylinder Speeds {5450,0374,5104}
1989/05/01
Shutoff Valve And Hoses Available To Shut Off Oil To Swing Cylinders When Roading Backhoe Loaders{4300,5050,5105}
1989/08/14
&quot;Shake&quot; Or Instability In Movement Of Bucket, Stick, Or Boom{5458,5051,5080,5124,5129,5456,5457}
1990/04/09
Improved Crossover Relief Valve Used In Swing Cylinders{5454}
1990/08/27
Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5104,5456,5457,5458,5468}
1990/10/08
Improved Hardware Used In Swing Cylinder Cap Assembly {5105}
1990/10/22
Stuck, Damaged, Missing Check Balls May Cause Swing Drift To Occur In Some Backhoe Loaders{5480,5105}
1990/10/29
Extension Stick Improvement Prevents Premature Failure Of Bucket Cylinder Mounting Bracket{6533,0787}
1991/01/07
Crossover Relief Valves Disabled To Eliminate Swing Drift{5111,5105,5454}
1991/07/01
New Stabilizer Pads Are Wider{7222}
1998/03/09
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 416 :

CYLINDER GP-BOOM
9T-5219 CYLINDER GP-BOOM
CYLINDER GP-BOOM
4T-6878 CYLINDER GP-BOOM
LINES GP-CYLINDER
9R-2962 LINES GP-CYLINDER
LINES GP-CYLINDER
9R-2962 LINES GP-CYLINDER
GUARD GP-CYLINDER
9R-3280 GUARD GP-CYLINDER
GUARD GP
9R-2716 GUARD GP
GUARD GP-CYLINDER
9R-2717 GUARD GP-CYLINDER
CYLINDER GP-LOADER LIFT
9T-0415 CYLINDER GP-LOADER LIFT
CYLINDER GP-SWING-LH
4T-6879 CYLINDER GP-SWING-LH
CYLINDER GP-SWING-RH
9T-0529 CYLINDER GP-SWING-RH
CYLINDER GP-SWING-RH
9T-0529 CYLINDER GP-SWING-RH
VALVE GP
9T-0716 VALVE GP
VALVE GP-RELIEF
9T-4752 VALVE GP-RELIEF
CYLINDER GP-STICK
4T-6877 CYLINDER GP-STICK
CYLINDER GP-STICK
9T-5216 CYLINDER GP-STICK
CYLINDER GP-STICK
9T-7063 CYLINDER GP-STICK

Truck sale:

Caterpillar 416-07, backhoe loader, Construction
125,530 
Caterpillar 416-07, backhoe loader, Construction
- backhoe loader
FOLEY EQUIPMENT COMPANY
Caterpillar D4-16 LGP, Crawler dozers, Construction
285,132 
Caterpillar D4-16 LGP, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D4-16 LGP, Crawler dozers, Construction
303,573 
Caterpillar D4-16 LGP, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
 
 
Caterpillar 416, backhoe loader, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
 
93,936 
Caterpillar 416, backhoe loader, Construction
- backhoe loader
MADISA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.