AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T2751 CYLINDER GP-EXTENDABLE BACKHOE BUCKET 82.55MM (3.25 IN.) BORE X 774.8MM (30.5 IN.) STROKE TYPE 2 PART OF 9R2661 EXTENDED STICK AN ATTACHMENT 416


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-COMBINATION
IMPLEMENTS
ARM GP
HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
LINKAGE GP
LOCK GP

BACKHOE LOADER 416 BACKHOE LOADER 5PC
 416 BACKHOE LOADER 5PC00001-06191 (MACHINE) POWERED BY T4.236 DIESEL ENGINE SEBP1576 416 5PC   (1985)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-EXTENDABLE STICK
9T-4809 CYLINDER GP-EXTENDABLE STICK
CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET
BRACE GP-LIFT CYLINDER
9R-0036 BRACE GP-LIFT CYLINDER
 

#SEBP15760380
 

9T-2751: CYLINDER GP-BACKHOE BUCKET

9T2751 CYLINDER GP-EXTENDABLE BACKHOE BUCKET
82.55MM (3.25 IN.) BORE X 774.8MM (30.5 IN.) STROKE
TYPE 2
PART OF 9R2661 EXTENDED STICK
AN ATTACHMENT
c347299 SEBP1576
9T2751 CYLINDER GP-BACKHOE BUCKET Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4933 R [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 8T-6950 [1] PIN-SPRING  
11. 6J-0793 [2] SEAL AS  
    (EACH INCLUDES)
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-2761 [1] STOP  
13. 9T-1471 [1] SPRING  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
17. 7J-5639 [1] BOLT-SELF LOCKING  
18. 4T-5602 R [1] CYLINDER AS  
19. 9R-0153 [2] BEARING-SLEEVE  
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15760381
 

9T-2751: CYLINDER GP-BACKHOE BUCKET

9T2751 CYLINDER GP-EXTENDABLE BACKHOE BUCKET
82.55MM (3.25 IN.) BORE X 774.8MM (30.5 IN.) STROKE
TYPE 3
PART OF 9R2661 EXTENDED STICK
AN ATTACHMENT
c401560 SEBP1576
9T2751 CYLINDER GP-BACKHOE BUCKET Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5799 CR [1] ROD AS  
2. 9R-0153 [2] BEARING-SLEEVE  
3. 1K-6981 J [1] SEAL-LIP TYPE  
4. 5J-8200 J [1] SEAL-U-CUP  
5. 6J-6917 J [1] SEAL-RING  
6. 4T-5613 J [1] RING-WEAR  
7. 4T-5612 [1] HEAD  
8. 6J-1381 J [1] RING-BACK-UP  
9. 2H-6184 J [1] SEAL-O-RING  
10. 7J-5639 [1] BOLT-SELF LOCKING  
11. 6J-0793 C [1] SEAL AS  
  6J-0790 J [1] SEAL  
  6J-0789 J [1] RING-EXPANDER  
12. 9T-6320 CR [1] CYLINDER AS  
13. 9R-0153 [2] BEARING-SLEEVE  
14. 8J-6370 [1] PISTON  
15. 8J-6371 J [1] RING-WEAR  
16. 5P-8250 [1] WASHER  
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3590 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP15760382
 

9R-3027: VALVE GP-COMBINATION HYD LOCK

9R3027 VALVE GP-COMBINATION HYDRAULIC LOCK
TYPE 1
PROVIDES LOCKVALVES TO MEET LIFTING REGULATIONS
FOR COSA USAGE. AN ATTACHMENT
c401238 SEBP1576
9R3027 VALVE GP-COMBINATION HYD LOCK Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [3] VALVE GP-LOAD CONTROL  
2. [1] VALVE GP-RESTRICTOR  
3. 9T-5452 [2] VALVE GP-RESTRICTOR  
 

#SEBP15760383
 

9R-3027: VALVE GP-COMBINATION HYD LOCK

9R3027 VALVE GP-COMBINATION HYDRAULIC LOCK
TYPE 2
PROVIDES LOCKVALVES TO MEET LIFTING REGULATIONS
FOR {COSA} USAGE. AN ATTACHMENT
c450280 SEBP1576
9R3027 VALVE GP-COMBINATION HYD LOCK Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. C [1] VALVE GP-LOAD CONTROL  
2. [1] VALVE GP-RESTRICTOR  
3. 9T-5452 [2] VALVE GP-RESTRICTOR  
4. C [2] VALVE GP-LOAD CONTROL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15760384
 

9R-0035: ARM GP-LIFT

9R0035 ARM GP-LIFT
c400926 SEBP1576
9R0035 ARM GP-LIFT Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [2] FITTING  
2. 8T-4176 M [2] BOLT  
3. 6V-3213 [2] RING-RETAINING  
4. 9R-0158 [2] WASHER  
5. 9R-0097 [2] PIN  
6. 6V-7687 M [2] LOCKNUT  
7. 3B-8489 [7] FITTING-GREASE  
8. 6V-8344 [2] RING  
9. 9R-1502 [2] WASHER  
10. 9R-0472 [1] PIN  
11. 9R-0081 [1] ARM AS  
12. 9R-0139 [4] BEARING-SLEEVE  
13. 9R-0111 [4] BEARING-SLEEVE  
14. 9R-0320 [2] BEARING  
15. 9R-1100 [2] PIN AS  
16. 9R-2820 C [2] SPACER  
17. 6V-8144 [6] RING  
18. 9R-0109 [4] WASHER  
19. 9R-3182 [2] PIN  
20. 9R-0109 CB [4] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP15760385
 

9R-0036: BRACE GP-LIFT CYLINDER

9R0036 BRACE GP-LIFT CYLINDER
c451830 SEBP1576
9R0036 BRACE GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-0661 [1] BRACE AS  
2. 5D-2653 [2] WASHER  
3. 9R-0189 [1] PIN  
4. 9R-5301 C [1] PIN-COTTER  
5. 8C-4447 C [1] FILM  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15760386
 

9R-4437: LINKAGE GP-BUCKET

9R4437 LINKAGE GP-BUCKET-FRONT
S/N 5PC1-2075
c354661 SEBP1576
9R4437 LINKAGE GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4195 M [4] BOLT  
2. 8T-4121 [4] WASHER  
3. 9R-1404 [2] PLATE  
4. 9R-4497 [1] LINK AS (RH)  
5. 9R-1107 [1] BEARING  
6. 9R-0411 [1] BEARING-SLEEVE  
7. 9R-4496 [1] LINK AS (LH)  
8. 9R-1107 [1] BEARING  
9. 9R-0411 [1] BEARING-SLEEVE  
10. 3B-8489 [5] FITTING-GREASE  
11. 9R-1524 [1] PIN AS  
12. 8T-4193 M [1] BOLT  
13. 8T-4132 M [1] NUT  
14. 9R-4494 [2] PIN AS  
15. 9R-0158 B [3] WASHER  
16. 6V-3213 [3] RING-RETAINING  
17. 9R-4482 [1] SPACER  
18. 9R-0100 [2] GUIDE AS  
    (EACH INCLUDES)
19. 9R-1104 [1] BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP15760387
 

9R-5137: LINKAGE GP-BUCKET

9R5137 LINKAGE GP-BUCKET-FRONT
S/N 5PC2076-UP
c478004 SEBP1576
9R5137 LINKAGE GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4195 M [4] BOLT  
2. 8T-4121 [4] WASHER  
3. 9R-1404 [2] PLATE  
4. 9R-5834 [1] LINK AS RH  
5. 9R-1107 [1] BEARING  
6. 9R-5828 [1] BEARING-SLEEVE  
7. 9R-5835 [1] LINK AS LH  
8. 9R-1107 [1] BEARING  
9. 9R-5828 [1] BEARING-SLEEVE  
10. 3B-8489 C [7] FITTING-GREASE  
11. 9R-7158 [1] PIN AS  
12. 8T-4193 M [1] BOLT  
13. 8T-4132 M [1] NUT  
14. 9R-4494 [2] PIN AS  
15. 9R-0158 B [6] WASHER  
16. 6V-3213 [3] RING-RETAINING  
17. 9R-4482 [1] SPACER  
18. 9R-5063 [2] GUIDE AS  
    (EACH INCLUDES)
19. 9R-1104 [1] BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP15760388
 

9R-1807: LOCK GP-TRANSPORT

9R1807 LOCK GP-TRANSPORT-COSA USAGE
TYPE 1
LOCKS TO SECURE BACKHOE & LOADER LINKAGE
AN ATTACHMENT
c401804 SEBP1576
9R1807 LOCK GP-TRANSPORT Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-2396 [1] CABLE AS  
2. 9R-2387 [1] PIN  
3. 9R-5301 C [5] PIN-COTTER  
4. 9R-2367 [1] LINK  
5. 9R-2366 [3] PIN  
6. 9R-5431 C [1] BRACE AS  
7. 9R-2364 [1] PLATE  
8. 9R-2365 [1] PIN  
9. 9R-0109 C [2] WASHER  
10. 8T-4136 M [1] BOLT  
11. 8T-4132 M [3] NUT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP15760389
 

9R-1807: LOCK GP-TRANSPORT

9R1807 LOCK GP-TRANSPORT-COSA USAGE
TYPE 2
LOCKS TO SECURE BACKHOE & LOADER LINKAGE
AN ATTACHMENT
c520547 SEBP1576
9R1807 LOCK GP-TRANSPORT Parts scheme
  For full view, you need register

Parts for your 416 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-2396 [1] CABLE AS  
2. 9R-2387 [1] PIN  
3. 9R-5301 C [3] PIN-COTTER  
4. 9R-6140 C [1] LINK  
5. 9S-1315 C [2] PIN-CLEVIS  
6. 9R-5431 [1] BRACE AS  
7. 9R-2364 [1] PLATE  
8. 9R-2365 [1] PIN  
9. 9R-0109 [2] WASHER  
10. 8T-4136 M [1] BOLT (M10X1.50X25MM)  
11. 6S-6646 C [2] PIN  
12. 9R-1100 [1] PIN AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Special Instruction
Installation Of Stabilizer Mounted 9R3280 Cylinder Guard Group{6505}
Installation Of Stabilizer Mounted 9R3280 Cylinder Guard Group{6505}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Australia
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-CFEL
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-CSARL
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Americas
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Brazil
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Tilt Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Stabilizer Cylinder (RH & LH)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Boom Cylinders
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Swing Cylinders (RH & LH)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Relief Valve For Swing Cylinders
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Backhoe Bucket Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Stick Cylinder
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Extendable Stick Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Extendable Stick Backhoe Bucket Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Multipurpose Bucket Clamp Cylinder (Optional)
416, 426 & 436 BACKHOE LOADERS HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Service Letter-Asia
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
Certain 0R2438 Remanufactured Cylinder Assemblies Need To Be Removed From Parts Stock
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
The Stabilizer Cylinder Flip-over Pad Mounting Pin Assemblies Need To Be Modified On Certain 416, 416B, 426, 426B, 436 And 436B Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Bucket Tilt Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Loader Lift Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Multi-Purpose Bucket Cylinder (428)
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Boom Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stick Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Boom And Stick Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Backhoe Bucket Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stick, Extendable Stick, Extendable Stick Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Extendable Stick Cylinder And Backhoe Bucket Cylinder
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Swing Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizer Cylinders
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizers
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Sideshift Assembly
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Stabilizer Cylinders (428)
416, 426 & 436, 428 & 438 BACKHOE LOADER VEHICLE SYSTEMS
Service Magazine
Larger Radius Now Used Between Pin Boss And Web On Stabilizer Assemblies {6505}
1986/12/01
New Bucket Tilt Cylinder Prevents Tube Assembly Damage{5104}
1987/03/16
New Bucket Tilt Cylinder And Tilt Cylinder Tube Assemblies Used{5057,5104}
1987/07/13
New Stabilizer Guards Prevent Boom Cylinder Damage{6505,5456}
1987/11/02
New Stabilizer Cylinders Have Larger Rod Bolts{5468}
1987/11/16
Improved Boom Control{5105,6506}
1987/12/14
New Bearing In Rod End Of Swing Cylinders{5105}
1987/12/21
Larger Piston Retaining Bolt Used In Certain Hydraulic Cylinders {5458,5468}
1988/09/26
Improved Boom Cylinder Lines {5057,5456}
1988/12/26
Procedure To Reinforce Boom Cylinder Mounting Bosses{6501,5456}
1989/01/30
New Specifications For Checking Cylinder Speeds {5450,0374,5104}
1989/05/01
Shutoff Valve And Hoses Available To Shut Off Oil To Swing Cylinders When Roading Backhoe Loaders{4300,5050,5105}
1989/08/14
&quot;Shake&quot; Or Instability In Movement Of Bucket, Stick, Or Boom{5458,5051,5080,5124,5129,5456,5457}
1990/04/09
Improved Crossover Relief Valve Used In Swing Cylinders{5454}
1990/08/27
Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5104,5456,5457,5458,5468}
1990/10/08
Improved Hardware Used In Swing Cylinder Cap Assembly {5105}
1990/10/22
Stuck, Damaged, Missing Check Balls May Cause Swing Drift To Occur In Some Backhoe Loaders{5480,5105}
1990/10/29
Extension Stick Improvement Prevents Premature Failure Of Bucket Cylinder Mounting Bracket{6533,0787}
1991/01/07
Crossover Relief Valves Disabled To Eliminate Swing Drift{5111,5105,5454}
1991/07/01
New Stabilizer Pads Are Wider{7222}
1998/03/09
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 416 :

CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-EXTENDABLE STICK
9T-4809 CYLINDER GP-EXTENDABLE STICK
CYLINDER GP-EXTENSION
9T-2215 CYLINDER GP-EXTENSION
CYLINDER GP
9T-7894 CYLINDER GP
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-5601 CYLINDER GP-BUCKET
CYLINDER GP-STABILIZER-LH
9T-7070 CYLINDER GP-STABILIZER-LH
CYLINDER GP-BACKHOE BUCKET
9T-2751 CYLINDER GP-BACKHOE BUCKET
VALVE GP-COMBINATION HYD LOCK
9R-3027 VALVE GP-COMBINATION HYD LOCK
VALVE GP-COMBINATION HYD LOCK
9R-3027 VALVE GP-COMBINATION HYD LOCK
ARM GP-LIFT
9R-0035 ARM GP-LIFT
BRACE GP-LIFT CYLINDER
9R-0036 BRACE GP-LIFT CYLINDER
LINKAGE GP-BUCKET
9R-4437 LINKAGE GP-BUCKET
LINKAGE GP-BUCKET
9R-5137 LINKAGE GP-BUCKET
LOCK GP-TRANSPORT
9R-1807 LOCK GP-TRANSPORT

Truck sale:

Caterpillar 416-07, backhoe loader, Construction
125,530 
Caterpillar 416-07, backhoe loader, Construction
- backhoe loader
FOLEY EQUIPMENT COMPANY
Caterpillar D4-16 LGP, Crawler dozers, Construction
285,132 
Caterpillar D4-16 LGP, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D4-16 LGP, Crawler dozers, Construction
303,573 
Caterpillar D4-16 LGP, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
 
 
Caterpillar 416, backhoe loader, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
 
93,936 
Caterpillar 416, backhoe loader, Construction
- backhoe loader
MADISA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.