AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U2665 CARTRIDGE GP-53 L/MIN (14 GPM) -REAR *R PART OF 3G5918 VANE PUMP G926 WHEEL LOADER


HYDRAULIC SYSTEM
PUMP GP
TANK GP
LINES GP-HYDRAULIC

WHEEL LOADER G926 WHEEL LOADER 1SD
 G926 WHEEL LOADER 1SD00001-00073 (MACHINE) POWERED BY 3204 ENGINE SEBP1618 G926 1SD   (1986)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-VANE
4V-6514 PUMP GP-VANE
PUMP GP-VANE
3G-5918 PUMP GP-VANE
CARTRIDGE GP
1U-2668 CARTRIDGE GP
CARTRIDGE GP
1U-2665 CARTRIDGE GP
 

#SEBP16180330
 

1U-2665: CARTRIDGE GP

1U2665 CARTRIDGE GP-53 L/MIN (14 GPM) -REAR *R
PART OF 3G5918 VANE PUMP
c529478 SEBP1618
1U2665 CARTRIDGE GP Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 054-4673 C [2] SCREW  
2. 3G-2714 C [4] RETAINER-SEAL  
3. 054-4672 C [2] PIN  
4. 9T-5046 C [1] PLATE-INLET  
5. 9T-5054 C [1] KIT-VANE  
6. 9T-5064 C [1] RING  
7. 6V-1196 [1] SEAL-O-RING  
8. 061-7540 [1] SEAL-O-RING  
9. 9T-5085 C [1] RING  
10. 9T-5089 C [1] PLATE-OUTLET  
11. 3G-2716 [1] RING-SEAL  
12. 9T-5096 C [2] FLEXPLATE  
13. 9T-5104 C [1] ROTOR  
14. 5P-8065 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16180331
 

9G-9288: COVER GP-PROTECTION

9G9288 COVER GP-PROTECTION-HYDRAULIC TANK GP
PART OF 9V1977 VANDALISM LOCK
AN ATTACHMENT
c228813 SEBP1618
9G9288 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-5072 [1] DOWEL  
2. 9M-7394 [1] LEVER  
3. 5D-1911 [1] COVER-HYDRAULIC CAP  
4. 2J-7761 [1] RING-RETAINING  
5. 5P-8502 [1] PADLOCK GP  
  5P-8500 A [2] KEY  
  A   NOT PART OF THIS GROUP
 

#SEBP16180332
 

4T-0489: TANK & FILTER GP

4T0489 FILTER & TANK GP-HYDRAULIC-PART 1 OF 2
S/N 1SD1-72
c325128 SEBP1618
4T0489 TANK & FILTER GP Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1932 [1] PLATE  
2. 6D-9157 [1] SEAL-O-RING  
3. 2M-4453 [1] SEAL-O-RING  
  9F-6656 [1] RING-RETAINER  
4. 9J-9842 [1] BOLT-FILTER  
  5P-8248 [1] WASHER-HARD  
5. 1U-0466 [1] COVER  
6. 1U-0465 [1] SPACER  
  3S-1223 [1] SEAL-O-RING  
7. 0S-1594 [70] BOLT  
8. 2K-4973 [72] LOCKNUT  
9. 4T-1930 [1] COVER AS  
  9D-5657 [5] BOSS  
  8J-6910 [6] STUD-WELD  
10. 9J-6379 [6] SPRING-DISC  
  9J-6381 [1] SPACER  
11. 4T-1933 [1] ROD  
12. 9J-5461 C [1] ELEMENT-FILTER  
13. 5M-2894 [2] WASHER  
14. 9H-7759 [1] RING-RETAINING  
15. 1J-5353 C [1] PIN-SPRING  
16. 4T-1934 [1] BASE-FILTER  
17. 2K-1594 [1] PIN-SPRING  
18. 9J-1988 [1] VALVE  
19. 3G-3498 [1] FLANGE  
20. 9J-1985 [1] TUBE AS  
21. 1L-4349 [1] SPRING  
22. 030-8535 [2] BOLT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16180333
 

4T-0489: TANK & FILTER GP

4T0489 FILTER & TANK GP-HYDRAULIC-PART 2 OF 2
S/N 1SD1-72
c325129 SEBP1618
4T0489 TANK & FILTER GP Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2050 [1] FILLER  
2. 2K-4973 [4] LOCKNUT  
3. 5M-2894 [6] WASHER  
4. 4J-8252 [1] GLASS  
  4J-8251 [1] GROMMET  
  3G-5980 [1] PLATE  
5. 1H-5728 [1] SEAL-O-RING  
6. 035-2017 [2] SCREW-BUTTON HEAD  
7. 5H-6005 [13] SEAL-O-RING  
8. 3G-2692 [1] RETAINER  
9. 1U-4834 [1] STRAINER  
10. 4T-1931 [1] BLOCK  
11. 6J-6714 [1] STRAINER AS  
12. 030-8535 [2] BOLT-SELF LOCKING  
13. 3G-3973 [1] BLOCK  
14. 1H-9696 [2] SEAL-O-RING  
15. 3G-3972 [1] BLOCK  
16. 5P-9119 BD SEALANT  
17. 4J-0522 [1] SEAL  
18. 0T-0768 [4] BOLT 44.45MM(1.75IN.)LG.  
    -OR-
  0T-0319 C [4] BOLT 50.8MM(2 IN.)LG.  
  5P-8244 C [4] WASHER  
19. 0S-1594 [9] BOLT  
20. 6F-4855 [8] SEAL-O-RING  
21. 9J-3047 [1] STRAINER  
22. 7H-1447 [1] CAP-FILLER  
23. 4B-9782 [1] BALL  
24. 6H-5139 [1] PLATE-PRESSURE  
  9H-6454 [1] GASKET  
25. 3G-0361 [1] GASKET  
26. 3G-2816 [1] RETAINER  
27. 1A-1460 C [4] BOLT  
  5P-8245 C [4] WASHER  
28. 8F-9206 [4] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP16180334
 

4T-0489: TANK & FILTER GP

4T0489 TANK & FILTER GP-HYDRAULIC-PART 1 OF 2
S/N 1SD73-UP
c499849 SEBP1618
4T0489 TANK & FILTER GP Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1932 [1] PLATE  
2. 6D-9157 C [1] SEAL-O-RING  
3. 2M-4453 [1] SEAL-O-RING  
  9F-6656 [1] RING-RETAINER  
4. 9J-9842 [1] BOLT-FILTER  
  5P-8248 [1] WASHER-HARD  
5. 1U-0466 [1] COVER  
6. 1U-0465 [1] SPACER  
  3S-1223 C [1] SEAL-O-RING  
7. 0S-1594 [70] BOLT  
8. 2K-4973 [72] LOCKNUT  
9. 9T-6307 C [1] COVER AS  
10. 9J-6379 [6] SPRING-DISC  
  9J-6381 [1] SPACER  
11. 4T-1933 [1] ROD  
12. 9J-5461 [1] ELEMENT-FILTER  
13. 5M-2894 [2] WASHER  
14. 9H-7759 [1] RING-RETAINING  
15. 1J-5353 [1] PIN-SPRING  
16. 4T-1934 [1] BASE-FILTER  
17. 2K-1594 [1] PIN-SPRING  
18. 9J-1988 [1] VALVE  
19. 3G-3498 [1] FLANGE  
20. 9J-1985 [1] TUBE AS  
21. 1L-4349 [1] SPRING  
22. 030-8535 [2] BOLT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16180335
 

4T-0489: TANK & FILTER GP

4T0489 TANK & FILTER GP-HYDRAULIC-PART 2 OF 2
S/N 1SD73-UP
c499850 SEBP1618
4T0489 TANK & FILTER GP Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2050 [1] FILLER  
2. 2K-4973 [4] LOCKNUT  
3. 5M-2894 [6] WASHER  
4. 4J-8252 [1] GLASS  
  4J-8251 [1] GROMMET  
  3G-5980 [1] PLATE  
5. 1H-5728 C [1] SEAL-O-RING  
6. 035-2017 [2] SCREW-BUTTON HEAD  
7. 5H-6005 [13] SEAL-O-RING  
8. 3G-2692 [1] RETAINER  
9. 1U-4834 [1] STRAINER  
10. 4T-1931 [1] BLOCK  
11. 6J-6714 [1] STRAINER AS  
12. 030-8535 [2] BOLT-SELF LOCKING  
13. 3G-3973 [1] BLOCK  
14. 1H-9696 C [2] SEAL-O-RING  
15. 3G-3972 [1] BLOCK  
16. 5P-9119 BD SEALANT  
17. 4J-0522 C [1] SEAL  
18. 0T-0319 [4] BOLT  
  5P-8244 [4] WASHER  
19. 0S-1594 [9] BOLT  
20. 6F-4855 C [8] SEAL-O-RING  
21. 9J-3047 [1] STRAINER  
22. 7H-1447 [1] CAP-FILLER  
23. 4B-9782 [1] BALL  
24. 6H-5139 [1] PLATE-PRESSURE  
  9H-6454 [1] GASKET  
25. 3G-0361 [1] GASKET  
26. 3G-2816 [1] RETAINER  
27. 1A-1460 [4] BOLT  
  5P-8245 [4] WASHER  
28. 8F-9206 [4] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP16180336
 

8V-4502: MOUNTING GP-HYDRAULIC TANK

8V4502 MOUNTING GP-HYDRAULIC TANK
c512645 SEBP1618
8V4502 MOUNTING GP-HYDRAULIC TANK Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8V-3942 [1] SHEET AS-LH  
  3R-4762 [1] PIN  
  9D-4439 [4] STUD-WELD  
2. 5P-8167 [12] BOLT  
3. 8V-3940 [1] SHEET AS-RH  
  3R-4762 [1] PIN  
  9D-4439 [4] STUD-WELD  
4. 9V-6312 [1] VALVE AS-DRAIN  
  8J-8783 [1] VALVE  
  7B-3039 [1] SPRING  
5. 8J-8782 [1] BODY-DRAIN VALVE  
  4J-0525 [1] SEAL-O-RING  
6. 9J-7031 [1] PLUG-DRAIN  
  8M-8515 [1] SEAL-O-RING  
7. 8T-2502 [2] BOLT  
8. 1P-3705 [1] SEAL  
9. 9B-7237 [2] BOLT (3/8-16X1.25IN)  
    -OR-
  7X-0288 [2] BOLT (3/8-16X1.63IN.)  
10. 5C-6565 [6] BOLT  
11. 3V-3308 C [2] WASHER (HARD)  
12. 9F-8885 [6] SPACER  
  1A-1460 [6] BOLT  
13. 6W-5096 [1] SUPPORT AS-RH  
  7D-1151 [1] BLOCK  
  9F-2978 [2] NUT-WELD  
  2K-7051 [1] BAR  
  8F-9836 [1] LUG  
14. 5P-7211 BD [2] SEAL  
15. 6W-7267 C [1] COVER AS  
16. 6V-8801 [2] NUT  
17. 8V-4838 [1] SUPPORT AS-LH  
18. 5P-1075 [4] WASHER-HARD  
19. 7X-0578 [8] WASHER-HARD  
20. 8T-4223 [12] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP16180337
 

8V-3595: LINES GP-HYDRAULIC

8V3595 LINES GP-HYDRAULIC OIL
S/N 1SD1-71
c535720 SEBP1618
8V3595 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9V-9458 [1] TUBE AS  
2. 2J-6540 [2] CLAMP  
3. 5P-1293 E HOSE 13CM(5.1 IN.)  
4. 8V-3251 [1] TUBE AS  
5. 5P-1935 [2] SEAL  
6. 5P-2094 E HOSE 9CM(3.5 IN.)  
7. 9M-7958 [2] CLAMP  
8. 9V-4948 [1] TUBE AS  
9. 5P-6416 [1] ELBOW-90 DEGREE  
10. 4K-1388 [1] SEAL-O-RING  
11. 0S-1587 [8] BOLT  
12. 5P-8245 [8] WASHER  
13. 030-8188 [1] CONNECTOR-FLARED  
14. 3K-0360 [1] SEAL-O-RING  
15. 8V-3254 [1] TUBE AS  
16. 0T-0573 [4] BOLT  
17. 5M-2894 [22] WASHER  
18. 1P-3703 [1] SEAL-RECTANGULAR  
19. 0S-1571 [4] BOLT  
20. 1S-4173 [1] CLIP (LARGE)  
21. 7M-3882 [1] CLIP (SMALL)  
22. 1A-2029 [1] BOLT  
23. 9S-8752 [1] NUT-FULL  
24. 9V-4946 [1] TUBE AS  
25. 6V-0852 [1] CAP-DUST  
26. 2P-8421 [1] ADAPTER-O-RING  
27. 3D-2824 [1] SEAL-O-RING  
28. 6V-3965 [1] NIPPLE AS  
29. 3J-1907 [1] SEAL  
30. 6V-0422 [1] PLUG  
31. 1P-5761 [2] FLANGE-HALF  
32. 1P-3704 [1] SEAL-RECTANGULAR  
33. 2R-6806 [1] CONNECTOR  
34. 3J-1907 [1] SEAL  
35. 8V-6841 I [1] HOSE AS  
  8S-9355 G HOSE IN.(44 CM)  
36. 3S-8503 [2] STEM AS-COLLET (90)  
37. 3S-7252 [2] SLEEVE  
38. 4J-0520 [2] SEAL  
39. 9V-9457 [1] TUBE AS  
40. 9V-1021 [1] BAR  
41. 0S-1594 [4] BOLT  
42. 3B-1915 [8] BOLT  
43. 1P-4577 [4] FLANGE-HALF  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16180338
 

6W-7744: LINES GP-HYDRAULIC

6W7744 LINES GP-HYDRAULIC OIL
S/N 1SD72-UP
c413118 SEBP1618
6W7744 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-1074 [1] TUBE AS  
2. 8T-6675 [2] CLAMP-HOSE  
3. 5P-1295 E HOSE 16CM(6.30IN)LG  
4. 9C-3094 [1] TUBE AS  
5. 5P-1935 C [1] SEAL  
6. 5P-2094 E HOSE 9CM(3.50IN)LG  
7. 5P-2230 [2] CLAMP-HOSE  
8. 9C-1073 [1] TUBE AS  
9. 6V-9008 C [1] ELBOW  
10. 7M-8485 C [1] SEAL-O-RING 35.64MM(1.40IN)OD  
11. 2B-0947 C [4] BOLT  
12. 5P-8245 [8] WASHER  
13. 6V-8634 [1] CONNECTOR-SEAL  
14. 3K-0360 [1] SEAL-O-RING 16.40MM(.65IN)OD  
15. 9C-3093 [1] TUBE AS  
16. 0T-0573 [4] BOLT  
17. 5M-2894 [18] WASHER  
18. 1P-3703 [1] SEAL-RECTANGULAR  
19. 0T-0319 [4] BOLT  
  5P-8244 [4] WASHER  
20. 3S-7608 [1] CLIP (LARGE)  
  7M-3882 [1] CLIP (SMALL)  
21. 0S-1594 [4] BOLT  
22. 1A-2029 [1] BOLT  
  9S-8752 [1] NUT-FULL  
   
23. 1P-4577 [4] FLANGE-HALF  
  4J-0520 [2] SEAL  
24. 9V-4946 [1] TUBE AS  
25. 6V-0852 [1] CAP-DUST  
26. 2P-8421 [1] ADAPTER-O-RING  
27. 3D-2824 [1] SEAL-O-RING  
28. 6V-3965 [1] NIPPLE AS  
29. 3J-1907 [1] SEAL  
30. 6V-0422 [1] PLUG  
31. 1P-5761 [2] FLANGE-HALF  
32. 1P-3704 [1] SEAL-RECTANGULAR  
33. 6V-8636 [1] CONNECTOR  
34. 3J-1907 [1] SEAL  
35. 8V-6841 [1] HOSE AS  
36. 0S-1585 [4] BOLT  
37. 3B-1915 [8] BOLT  
38. 6V-8397 [2] SEAL-O-RING 10.20MM(.40IN)OD  
39. 9C-1075 [1] TUBE AS  
40. 9V-1021 [1] BAR  
41. 5K-9090 [1] SEAL 24.40MM(.96IN)OD  
42. 5H-8848 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP16180339
 

8V-7418: LINES GP-HYDRAULIC

8V7418 LINES GP-HYDRAULIC OIL-3 VALVE
REPLACED BY 6W7738-PAGE 196.01
AN ATTACHMENT
c326400 SEBP1618
8V7418 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your G926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9V-9459 [1] TUBE AS  
2. 2J-6540 [2] CLAMP  
3. 5P-1293 E HOSE 13CM(5.1IN)  
4. 8V-3251 [1] TUBE AS  
5. 5P-1935 [2] SEAL  
6. 5P-2094 E HOSE 9CM(3.5IN)  
7. 9M-7958 [2] CLAMP  
8. 9V-4948 [1] TUBE AS  
9. 5P-6416 [1] ELBOW-90 DEGREE  
10. 4K-1388 [1] SEAL-O-RING  
11. 0S-1585 [8] BOLT  
12. 5P-8245 [8] WASHER  
13. 030-8188 [1] CONNECTOR-FLARED  
14. 3K-0360 [1] SEAL-O-RING  
15. 8V-3254 [1] TUBE AS  
16. 0T-0573 [4] BOLT  
17. 5M-2894 C [18] WASHER  
18. 1P-3703 [1] SEAL-RECTANGULAR  
19. 0T-0319 C [4] BOLT  
20. 1S-4173 [1] CLIP (LARGE)  
21. 7M-3882 [1] CLIP (SMALL)  
22. 1A-2029 [1] BOLT  
23. 9S-8752 [1] NUT-FULL  
24. 9V-4949 [1] TUBE AS  
25. 6V-0852 [1] CAP-DUST  
26. 2P-8421 [1] ADAPTER-O-RING  
27. 3D-2824 [1] SEAL-O-RING  
28. 6V-3965 [1] NIPPLE AS  
29. 3J-1907 [1] SEAL  
30. 6V-0422 [1] PLUG  
31. 1P-5761 [2] FLANGE-HALF  
32. 1P-3704 [1] SEAL-RECTANGULAR  
33. 2R-6806 [1] CONNECTOR  
34. 3J-1907 [1] SEAL  
35. 8V-6841 [1] HOSE AS  
  8S-9355 G HOSE 17.32IN(44CM)  
36. 3S-8503 [2] STEM AS-COLLET  
37. 3S-7252 [2] SLEEVE  
38. 4J-0520 [2] SEAL  
39. 9V-9455 [1] TUBE AS  
40. 9V-1021 [1] BAR  
41. 0S-1594 [4] BOLT  
42. 3B-1915 [8] BOLT  
43. 1P-4577 [4] FLANGE-HALF  
44. 5P-8244 C [4] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog G926 :

CARTRIDGE GP
1U-2668 CARTRIDGE GP
PUMP GP-VANE
3G-5918 PUMP GP-VANE
PUMP GP-VANE
4V-6514 PUMP GP-VANE
KICKOUT & POSITIONER GP
3V-6320 KICKOUT & POSITIONER GP
LOCK GP-HYDRAULIC HAND CONTROL
8V-7970 LOCK GP-HYDRAULIC HAND CONTROL
LOCK GP-HYDRAULIC HAND CONTROL
9C-1439 LOCK GP-HYDRAULIC HAND CONTROL
LOCK GP-HYDRAULIC HAND CONTROL
8V-1156 LOCK GP-HYDRAULIC HAND CONTROL
LOCK GP-HYDRAULIC HAND CONTROL
9V-2675 LOCK GP-HYDRAULIC HAND CONTROL
COVER GP-PROTECTION
9G-9288 COVER GP-PROTECTION
TANK & FILTER GP
4T-0489 TANK & FILTER GP
4T-0489 TANK & FILTER GP
TANK & FILTER GP
4T-0489 TANK & FILTER GP
4T-0489 TANK & FILTER GP
MOUNTING GP-HYDRAULIC TANK
8V-4502 MOUNTING GP-HYDRAULIC TANK
LINES GP-HYDRAULIC
8V-3595 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
6W-7744 LINES GP-HYDRAULIC

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.