AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-6957 CYLINDER BLOCK GP S/N 49Y518-925; 65Z648-886 Type 2 FIELD REPLACEMENT FOR @@@@@ 2W-2943@@@@@, @@@@@ 9Y-9594@@@@@ FIELD INSTALLATION 3512


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

INDUSTRIAL ENGINE 3512 INDUSTRIAL ENGINE 49Y
 3512 ENGINE 49Y00486-00925 SEBP1621 3512 49Y   (1980)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7263 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4664 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-1244 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-3504 CYLINDER BLOCK GP
 

#SEBP16210060
 

7C-6957: CYLINDER BLOCK GP

7C-6957 CYLINDER BLOCK GP
S/N 49Y518-925; 65Z648-886
Type 2
FIELD REPLACEMENT FOR @@@@@ 2W-2943@@@@@, @@@@@ 9Y-9594@@@@@
FIELD INSTALLATION
i00109988 SEBP1621
7C6957 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-9598 CY [1] CYLINDER BLOCK AS  
2. 5M-6213 [5] PLUG-PIPE  
3. 5M-6213 B [1] PLUG-PIPE  
4. 2B-0858 [4] PLUG-PIPE  
5. 1B-5174 [2] PLUG-PIPE  
6. 7H-3171 [24] PLUG-PIPE (HEX COUNTERSUNK)  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
10. 7N-2048 [14] BEARING-CAMSHAFT  
    (FOR REPAIR OF CRACKED CYLINDER BLOCK)
  7W-5949 [1] INSERT-LINER SEAT (SHALLOW CRACKS)  
   
    AVAILABLE REPAIR KIT(S):
  7E-2865 Y [1] KIT-INSERT (CYLINDER BLOCK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16210061
 

7E-4664: CYLINDER BLOCK GP

7E-4664 CYLINDER BLOCK GP
S/N 49Y533-925; 65Z683-886
FIELD INSTALLATION
i00092836 SEBP1621
7E4664 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [14] BEARING-CAMSHAFT  
2. 9S-4191 [6] PLUG  
3. 033-6042 [6] SEAL-O-RING  
4. 2B-0858 [4] PLUG-PIPE  
5. 1B-5174 [2] PLUG-PIPE  
6. 7H-3171 [24] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
  7W-5949 [1] INSERT-LINER SEAT  
10. 7E-4663 [1] CYLINDER BLOCK AS  
11. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
12. 7X-7925 [28] BOLT (7/8-14X11-IN)  
13. 9Y-9175 [7] CAP-CRANKSHAFT BEARING  
14. 4W-4813 [2] PLUG  
15. 8T-2929 [2] SEAL-O-RING  
16. 8T-2928 [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  7E-2865 Y [1] KIT-INSERT (CYLINDER BLOCK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16210062
 

101-1244: CYLINDER BLOCK GP

101-1244 CYLINDER BLOCK GP
S/N 49Y698-740; 65Z787-804
FIELD REPLACEMENT FOR @@@@@101-1227@@@@@
i00092983 SEBP1621
1011244 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1241 Y [1] CYLINDER BLOCK AS  
2. 9S-4191 [6] PLUG  
3. 033-6042 [6] SEAL-O-RING  
4. 2B-0858 [4] PLUG-PIPE  
5. 1B-5174 [2] PLUG-PIPE  
6. 7H-3171 [22] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 7N-5641 [2] PLUG-MANIFOLD  
10. 5F-9657 [4] SEAL-O-RING  
11. 7N-2048 [14] BEARING-CAMSHAFT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16210063
 

115-3504: CYLINDER BLOCK GP

115-3504 CYLINDER BLOCK GP
S/N 49Y741-925; 65Z805-886
i00492050 SEBP1621
1153504 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8026 Y [1] CYLINDER BLOCK AS  
2. 5P-0840 [24] SEAL-O-RING  
3. 110-6994 [12] PLATE-SPACER  
4. 144-5692 [12] GASKET-PLATE  
5. 8T-0099 [24] DOWEL  
6. 197-7008 [12] DOWEL  
7. 5P-8210 [2] SEAL-O-RING  
8. 8N-8056 [2] COVER  
9. 0T-0102 [12] BOLT (3/8-16X0.625-IN)  
10. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
12. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
14. 116-3254 [12] JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY)  
15. 1W-4188 [12] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  6V-3537 [1] DOWEL  
16. 1B-2790 [12] BOLT (5/16-18X1.375-IN)  
  9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
17. 8T-6763 [22] PLUG-PIPE (1/4-18-THD)  
18. 153-4906 [6] SEAL-O-RING  
19. 8T-2928 [1] SEAL-O-RING  
20. 8T-2929 [1] SEAL-O-RING  
21. 4W-4814 [1] ADAPTER  
22. 6V-3348 [8] SEAL-O-RING  
23. 5F-9657 [4] SEAL-O-RING  
24. 4N-0683 [2] DOWEL  
25. 7N-2044 [2] DOWEL  
26. 7N-2047 [3] DOWEL  
27. 7X-4805 [3] SEAL-O-RING  
28. 116-1359 [14] BEARING-CAMSHAFT  
29. 7X-7731 [2] PLUG-PIPE  
30. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
31. 9S-4191 [6] PLUG  
32. 2W-2940 [8] PLUG  
33. 7N-5641 [2] PLUG-MANIFOLD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16210064
 

115-5154: CYLINDER BLOCK GP

115-5154 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@100-8026@@@@@
i00093036 SEBP1621
1155154 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2779 Y [1] CYLINDER BLOCK AS  
2. 9S-4191 [6] PLUG  
3. 033-6042 [6] SEAL-O-RING  
4. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
5. 7X-7731 [2] PLUG-PIPE  
6. 8T-6763 [22] PLUG-PIPE (1/4-18-THD)  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 7N-5641 [2] PLUG-MANIFOLD  
10. 5F-9657 [4] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16210065
 

4W-1900: CYLINDER HEAD AS

4W-1900 CYLINDER HEAD AS
S/N 49Y486-925
FIELD INSTALLATION
i00378291 SEBP1621
4W1900 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-5801 [1] CYLINDER HEAD AS  
2. 9S-8002 [4] PLUG  
  3J-7354 [4] SEAL-O-RING  
3. 3B-0623 [6] PLUG-CUP  
4. 3P-1896 [3] PLUG-CUP  
5. 1W-1801 [4] INSERT-VALVE SEAT  
6. 4D-0514 B [1] PLUG-PIPE  
7. 7N-1819 [4] GUIDE-VALVE  
8. 7N-1902 [2] DOWEL  
  B   USE AS REQUIRED
 

#SEBP16210066
 

7E-5859: CYLINDER HEAD AS

7E-5859 CYLINDER HEAD AS
S/N 49Y555-925; 65Z690-886
PART OF 7E-5861 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@ 7E-5861@@@@@
i00091636 SEBP1621
7E5859 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1847 [4] GUIDE-VALVE  
2. 7N-1902 [2] DOWEL  
3. 4D-0514 [1] PLUG-PIPE (1/16-27 NPTF)  
 

#SEBP16210067
 

7E-5861: CYLINDER HEAD AS

7E-5861 CYLINDER HEAD AS
S/N 49Y555-828; 65Z690-852
PART OF 101-1206, 4P-9123, 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7E-5859@@@@@
ALSO AN ATTACHMENT
i00091637 SEBP1621
7E5861 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 3B-0645 [5] PLUG-CUP  
3. 7E-5862 [2] INSERT-VALVE SEAT (INLET)  
4. 3J-7354 [4] SEAL-O-RING  
5. 118-9491 [2] INSERT-VALVE SEAT (EXHAUST)  
6. 3B-0623 [5] PLUG-CUP  
7. 9S-8002 [4] PLUG  
 

#SEBP16210068
 

131-0410: CYLINDER HEAD AS

131-0410 CYLINDER HEAD AS
S/N 49Y829-925; 65Z853-886
PART OF 131-0424, 156-9140 CYLINDER HEAD AS, 4P-9123, 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@131-0424@@@@@, @@@@@156-9140@@@@@, @@@@@172-0839@@@@@
ALSO AN ATTACHMENT
i00506568 SEBP1621
1310410 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 3B-0645 [5] PLUG-CUP  
3. 3J-7354 [4] SEAL-O-RING  
4. 131-4340 [2] INSERT-VALVE SEAT (STANDARD)(EXHAUST)  
  149-0246 AB INSERT-VALVE SEAT (0.51-MM OS)  
5. 3B-0623 [5] PLUG-CUP  
6. 9S-8002 [4] PLUG  
7. 136-9630 [2] INSERT-VALVE SEAT (STANDARD)(INLET)  
  149-0245 AB INSERT-VALVE SEAT (0.508-MM OS)(INLET)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP16210069
 

131-0424: CYLINDER HEAD AS

131-0424 CYLINDER HEAD AS
FIELD REPLACEMENT FOR 131-0410 CYLINDER HEAD AS
i00506580 SEBP1621
1310424 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-0410 Y [1] CYLINDER HEAD AS  
2. 133-9306 [4] GUIDE-VALVE (STANDARD)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS OD)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS OD)  
  273-3554 AB GUIDE-VALVE (0.254-MM OS OD)  
  301-9248 AB GUIDE-VALVE (0.381-MM OS OD)  
3. 7N-1902 [2] DOWEL  
4. 4D-0514 [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V3147 Main Bearing Wrench Now Available
1980/11/12
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts
1984/04/11
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Cylinder Liner Seat Insert Available
1986/05/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Piston Oil Cooling Jet Assembly Used
1987/01/01
Wider Main Bearing Cap And Higher Torque On Cap Bolts
1988/08/01
New Piston Cooling Jets Used
1988/09/01
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used
1989/04/01
New Viton Rubber Seals Used
1989/07/01
Stronger Spacer Plate Prevents Cracking
1989/08/01
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01
New Cylinder Blocks And Crankshafts Used
1991/04/01
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert
1991/08/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Main Bearings Have Higher Fatigue Strength
1993/09/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
"Narrow Flange" Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of "Wide Flange" Cylinder Liners {1221}
1995/05/01
Information For Ordering Replacement Cylinder Block For Engine{1201}
1995/06/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
New Cylinder Liner {1216}
2003/05/01
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
2010/12/16
A New Cylinder Head Gasket and Spacer Plate Are Used for Certain 3500 Locomotive Engines {1100, 1201, 7555}
2012/06/01
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2011/07/29
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/09/14
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/06/20
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Head Spacer Plate Is Now Used on Certain 3500 Engines {1201, 1221}
A New Cylinder Head Spacer Plate Is Now Used on Certain 3500 Engines {1201, 1221}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Cylinder Liner Projection and Head Bolt Torque Procedure for the <NOBR>519-7297</NOBR> Spacer Plate on Certain 3500 Engines {1100, 1201, 1221}
Cylinder Liner Projection and Head Bolt Torque Procedure for the 519-7297 Spacer Plate on Certain 3500 Engines {1100, 1201, 1221}
Service Letter-NACD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Australia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-CFEL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-CSARL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Americas
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Truck/Ag/Marine
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Oil Cooler Bypass And Cooling Jet Sequence Valves
SUPPLEMENT FOR UPRATED 3500 ENGINES
Cylinder Liner
3500 Industrial Engines
Piston and Rings - Two-Piece Piston
3500 Industrial Engines
Piston and Rings
3500 Industrial Engines
Piston and Rings - One-Piece Piston
3500 Industrial Engines
Piston and Rings - One-Piece Piston
3500 Industrial Engines
Connecting Rod
3500 Industrial Engines
Cylinder Block
3500 Industrial Engines
Cylinder Block
3500 Industrial Engines
Service Letter-China
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Asia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Systems Operation
Cylinder Block, Liners and Heads
3500 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
Service Letter-APD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Industrial Engines
Cylinder Liner Projection
3500 Industrial Engines
Cylinder Block
3500 Industrial Engines
Main Bearings
3500 Industrial Engines
Disassembly and Assembly
PISTON COOLING JETS, SERVICE METER
3500 INDUSTRIAL ENGINE
SPACER PLATES
3500 INDUSTRIAL ENGINE
CRANKSHAFT MAIN BEARINGS
3500 INDUSTRIAL ENGINE
CYLINDER LINERS
3500 INDUSTRIAL ENGINE
CAMSHAFT BEARINGS, CRANKSHAFT
3500 INDUSTRIAL ENGINE
Service Magazine
6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10
6V4019 Camshaft Pilot Group Is Available{0622,1210,1211,1201}
1980/12/22
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier{0621}
1981/07/06
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
Correct Installation Of Oil Sequence Valves{1304}
1985/04/22
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
New Piston Oil Cooling Jet Assembly Used {1331}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Wider Main Bearing Cap And Higher Torque On Cap Bolts{1201}
1988/08/15
New Piston Cooling Jets Used{1331,1200}
1988/09/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10
Stronger Spacer Plate Prevents Cracking{1221,1350}
1989/07/24
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
1991/07/22
New Steel Plunger Used In Oil Filter Relief Valve Plunger; Use 2P4005 Oil Filters Instead Of 1R0716 Oil Filters{1315,1318}
1992/07/13
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05

Caterpillar Parts SIS Catalog 3512 :

CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7263 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8245 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8245 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-2944 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-2944 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-2944 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-2944 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4664 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-1244 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-3504 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5154 CYLINDER BLOCK GP
CYLINDER HEAD AS
4W-1900 CYLINDER HEAD AS
CYLINDER HEAD AS
7E-5859 CYLINDER HEAD AS
CYLINDER HEAD AS
7E-5861 CYLINDER HEAD AS
CYLINDER HEAD AS
131-0410 CYLINDER HEAD AS

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.