AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N8298 EXHAUST GP-EXTENSION 160G MOTOR GRADER


AIR INLET AND EXHAUST SYSTEM
EXHAUST GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR GP
PUMP GP-FUEL INJECTION
TORQUE CONTROL GP
GOVERNOR GP
PUMP GP-FUEL PRIMING

MOTOR GRADER 160G MOTOR GRADER 4JD
 160G MOTOR GRADER 4JD00001-00140 (MACHINE) POWERED BY 3306DI ENGINE SEBP1625 160G 4JD   (1986)

AIR INLET AND EXHAUST SYSTEM

EXHAUST GP
EXTENSION GP-EXHAUST
4N-8298 EXTENSION GP-EXHAUST
 

#SEBP16250080
 

4N-8298: EXTENSION GP-EXHAUST

4N8298 EXHAUST GP-EXTENSION
c207259 SEBP1625
4N8298 EXTENSION GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4611 [1] PIPE-EXHAUST  
2. 7S-8735 [1] CLAMP  
3. 2P-3205 [1] BOLT-WASHER HEAD  
  1B-5355 [1] NUT-FULL  
 

#SEBP16250081
 

5T-4443: CONTROL GP-GOVERNOR

5T4443 CONTROL GP-GOVERNOR-PART 1 OF 3
c340603 SEBP1625
5T4443 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [2] BOLT  
2. 1D-4717 [2] NUT  
3. 8D-5126 C [1] SHAFT  
4. 4D-2498 [1] LEVER  
5. 1B-8704 [2] KEY-WOODRUFF  
6. 4B-3388 [2] BOLT  
7. 9M-1974 [2] WASHER  
8. 1D-4716 [2] NUT-FULL  
9. 0L-1351 [2] BOLT  
10. 8D-6174 [1] BRACKET AS  
11. 7H-1051 [1] BUSHING  
12. 0V-0196 [2] BOLT  
13. 1A-8285 [3] NUT-JAM  
14. 3D-9609 [1] END-ROD  
15. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] COTTER  
16. 8D-5996 [1] LEVER  
17. 5B-2551 [1] DISC-FRICTION  
18. 5P-1075 [2] WASHER-HARD  
19. 8W-3589 [1] LINK AS-SPRING  
  7D-9212 [1] SPRING 11.1CM(4.4IN)LG.  
  6D-0458 [2] RETAINER  
  2S-1382 [1] SPRING 5CM(1.97IN)LG.  
  4F-9503 [1] SPRING 4.8CM(1.875IN)LG.  
20. 4B-5273 C [1] WASHER  
21. 0L-0821 C [1] SEAT-SPRING  
22. 5D-0998 C [6] SPRING-DISC  
23. 4J-6580 C [1] WASHER  
24. 2K-0564 C [1] LOCKNUT  
25. 6G-3505 [1] HANDLE AS  
  4F-8686 [1] BEARING-SLEEVE  
26. 4V-0627 [1] ROD  
27. 0L-0829 [1] HANDLE (HAND THROTTLE)  
28. 4H-9304 [1] STUD-TAPERLOCK  
29. 1B-2578 [2] NUT  
30. 7H-3641 [2] ROD END-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16250082
 

5T-4443: CONTROL GP-GOVERNOR

5T4443 CONTROL GP-GOVERNOR-PART 2 OF 3
c332915 SEBP1625
5T4443 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-9579 [1] BOLT  
  1D-4716 [1] NUT-FULL  
2. 8D-4119 [1] LEVER  
3. 1B-0676 [2] PIN  
  3B-4615 [2] PIN-COTTER  
4. 5P-1075 [9] WASHER-HARD  
5. 5B-9079 [2] NUT-JAM  
6. 3D-9806 [1] ROD-CONTROL  
7. 0S-1592 [1] BOLT  
8. 1F-5403 [2] END-ADJUSTABLE ROD  
9. 0S-1591 [1] BOLT  
  1D-4717 [1] NUT  
10. 0S-1594 [6] BOLT  
11. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
12. 9D-0148 [1] CABLE  
13. 8D-9973 [1] HOUSING  
14. 9D-0246 [1] BRACKET AS  
15. 9F-2978 [3] NUT-WELD  
16. 0T-0065 [3] BOLT  
17. 7K-2135 [1] BEARING-ROLLER  
18. 5T-3475 [1] SHAFT  
19. 4J-2667 [1] BEARING-NEEDLE  
20. 0S-1588 [1] BOLT  
21. 9D-0194 [1] LEVER  
22. 1B-8704 [2] KEY-WOODRUFF  
23. 7H-3641 [1] ROD END-BEARING  
24. 2B-2695 [1] BOLT  
  3F-9556 [1] LOCKWASHER  
25. 5H-0745 [1] LEVER-GOVERNOR CONTROL  
26. 5P-8247 [2] WASHER-HARD  
27. 9M-7783 [1] SPACER  
28. 0S-1589 [1] BOLT  
29. 1A-8285 [1] NUT-JAM  
30. 4L-8183 [1] SPACER  
 

#SEBP16250083
 

5T-4443: CONTROL GP-GOVERNOR

5T4443 CONTROL GP-GOVERNOR-PART 3 OF 3
c401975 SEBP1625
5T4443 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3641 [2] ROD END-BEARING  
  1A-8285 [2] NUT-JAM  
2. 4B-3388 [1] BOLT  
  1D-4716 [1] NUT-FULL  
  9M-1974 [1] WASHER  
3. 8W-0317 [1] LEVER  
4. 1B-8704 [2] KEY-WOODRUFF  
5. 0S-1588 [2] BOLT  
6. 8D-5119 [1] SHAFT  
7. 7K-2135 [1] BEARING-ROLLER  
8. 4J-2667 [1] BEARING-NEEDLE  
9. 9D-0145 [1] LEVER  
10. 2B-2695 [1] BOLT  
  3F-9556 [1] LOCKWASHER  
11. 8D-9973 [1] HOUSING  
12. 1D-5117 [3] NUT-JAM  
13. 4H-2186 [1] TREADLE AS  
  2M-6835 C [1] PIPE  
14. 0T-0065 [3] BOLT  
15. 6G-0255 [1] TREADLE AS  
16. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
17. 0S-1594 [6] BOLT  
18. 5P-1075 [9] WASHER-HARD  
19. 2D-2285 [1] BOLT  
20. 1B-2578 [3] NUT  
21. 8W-0328 [1] CYLINDER-DAMPER  
22. 2K-4973 [1] LOCKNUT  
23. 8T-1760 [1] CLIP  
24. 1D-4717 [1] NUT  
25. 3B-1915 [2] BOLT  
  5M-2894 [2] WASHER  
26. 4M-0495 [1] ROD END-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16250084
 

2W-0258: PUMP GP-GOV & FUEL INJ

2W0258 GOVERNOR & FUEL INJECTION PUMP GP
8N7276-PAGE 58, 2W0256-PAGE 66,7W1488-PAGE 59, 7C8993-PAGE 57.01
c499487 SEBP1625
2W0258 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 8L-5832 C [1] NUT-HEX  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 8N-3088 [1] SHAFT AS-THROTTLE  
7. 7N-5334 [1] SETSCREW-SOCKET  
   
    -OR-
   
  5H-6552 [1] SETSCREW-SOCKET  
8. 8N-9594 [1] SPRING-GOVERNOR  
9. 7N-2176 [1] PIN-DETENT  
10. 7W-1901 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 8N-7276 Y [1] TORQUE CONTROL GP  
13. 8M-8515 [1] SEAL-O-RING  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 0S-1616 C [2] BOLT  
16. 5P-6620 [1] SEAL-O-RING  
17. 7N-8768 [1] GASKET  
18. 7C-8993 CY [1] FASTENER GP  
19. 8N-5784 [1] DEFLECTOR-PULSE  
20. 4W-5734 [1] LEVER AS  
  8L-5832 C [1] NUT-HEX  
  6V-6835 [1] SETSCREW-SOCKET  
   
   
21. 2W-0256 Y [1] PUMP GP-FUEL INJECTION  
22. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
23. 3J-1907 [1] SEAL  
24. 7W-1488 Y [1] GOVERNOR GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16250085
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C8993 FASTENER GP
PART OF 2W0258 GOVERNOR & FUEL INJECITON PUMP
c459043 SEBP1625
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT 50.8MM(2.0IN)LG  
2. 4N-1761 [4] BOLT 165.1MM(6.5IN)LG  
3. 9S-4191 [1] PLUG-O-RING  
4. 0S-1614 [3] BOLT 12.7MM(.5IN)LG  
5. 4F-7957 C [8] BOLT 22.22MM(.8748IN)LG  
6. 2S-7383 [1] BOLT  
7. 8F-8178 [2] BOLT 82.55MM(3.25IN)LG  
8. 6B-4198 [2] BOLT 106.36MM(4.19IN)LG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16250086
 

8N-7276: TORQUE CONTROL GP

8N7276 CONTROL GP-TORQUE
PART OF 2W0258 GOVERNOR & FUEL INJECTION PUMP
c489885 SEBP1625
8N7276 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1796 C [1] SPACER (1.549MM THK)  
2. 8N-7519 [1] SPRING-TORQUE (.635MM THK)  
3. 2W-7234 [1] BAR-LOAD STOP (4.0MM THK)  
4. 6L-5897 C [2] BOLT  
5. 8M-9062 [1] RETAINER-SPRING  
6. 2P-2685 [1] SPACER (.635 MM THK)  
7. 1P-6452 [1] INSULATOR  
8. 7W-5700 C [1] CONTACT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16250087
 

7W-1488: GOVERNOR GP

7W1488 GOVERNOR GP-PART 1 OF 2
PART OF 2W0258 GOVERNOR & FUEL INJECTION PUMP
c479044 SEBP1625
7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT  
2. 6L-5897 [2] BOLT  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 2W-5161 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 8L-5832 C [1] NUT-HEX  
8. 5H-6552 [1] SETSCREW-SOCKET 31.75MM(1.25IN)LG  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET 34.92MM(1.375IN)LG  
9. 8N-3258 [1] COVER-LOAD STOP  
  8N-3264 [1] GASKET  
10. 1P-2497 [2] BOLT-HEAD  
11. 3P-0009 [1] INSULATOR-STUD  
12. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
13. 4N-5485 [1] BODY-VALVE  
14. 4N-5484 [1] VALVE-NEEDLE  
15. 6H-9691 [1] SEAL-O-RING  
16. 5F-9144 [1] SEAL-O-RING  
17. 1W-6523 [1] PLUG-O-RING  
18. 8N-3259 [1] COVER-HIGH IDLE  
  8N-3263 [1] GASKET  
19. 5P-6945 C [2] BOLT  
20. 3J-7354 [1] SEAL-O-RING  
21. 0S-1616 C [6] BOLT  
22. 7N-8780 [1] COVER AS-CONTROL  
23. 5P-3272 [1] SEAL-LIP TYPE  
24. 7N-8779 [1] GASKET-COVER  
25. 8N-2501 [1] HOUSING AS-GOVERNOR (REAR)  
  7E-5346 [1] VALVE AS  
  2F-2290 [1] PLUG-CORE  
26. 4N-0260 [1] SEAL-LIP TYPE  
27. 3D-8317 [1] RING-RETAINING  
28. 8N-2499 [1] GUIDE-SPRING  
29. 7N-8821 [1] RING-RETAINING  
30. 7W-2000 C [1] STOP-DETENT  
31. 6V-8137 [2] SCREW-BUTTON HEAD  
  7W-1318 [1] PLATE-RETAINING  
32. 2W-7400 [1] SPRING  
33. 2W-9996 [1] SCREW-IDLE STOP  
  7W-4272 C [1] NUT-SEALING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16250088
 

7W-1488: GOVERNOR GP

7W1488 GOVERNOR GP-PART 2 OF 2
PART OF 2W0258 GOVERNOR & FUEL INJECTION PUMP
c479045 SEBP1625
7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
2. 1N-3800 [1] SLEEVE-RACK CONTROL  
3. 6N-3504 [1] SEAT-GOVERNOR SPRING  
4. 2W-2216 [1] SPRING-LINK  
5. 2M-7819 [2] RING-RETAINING  
6. 1N-3802 [1] SEAT-SPRING  
7. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 C [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
8. 1W-4098 [1] PISTON-GOVERNOR SERVO  
9. 7W-0250 C [1] SLEEVE  
10. 5P-9757 [1] SEAL-O-RING  
11. 031-0216 [3] BOLT  
12. 4N-2953 [1] RING-LOCK  
13. 7E-4892 [2] RACE-BEARING-THRUST  
14. 7M-7219 [1] BEARING-THRUST  
15. 4W-6868 [1] RISER-GOVERNOR  
16. 4N-0432 [1] BALL BEARING  
17. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN 12.7MM(5IN)LG  
  4F-6024 [2] PIN 8MM(.315IN)LG  
   
   
   
18. 8N-2503 [1] DASHPOT AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
19. 4N-6404 [1] RING-RETAINING  
20. 2P-9556 [1] WASHER  
21. 2N-0828 [2] WASHER  
22. 7N-8785 [1] SHAFT-PIVOT  
23. 7N-8821 [2] RING-RETAINING  
24. 7N-7270 [2] SLEEVE-SPRING  
25. 3K-5733 [1] SPRING  
26. 7N-7267 [1] SPRING  
27. 2W-9305 [1] PLATE-THROTTLE  
28. 7W-1321 [1] PLATE-THROTTLE  
29. 8N-3168 [1] LEVER-THROTTLE  
30. 2W-6102 [1] LEVER-SPRING SEAT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16250089
 

8N-6201: PUMP GP-FUEL PRM & PRIM FILTER

8N6201 PUMP GP-FUEL PRIMING & PRIMARY FILTER
8N6200-PAGE 63
PART OF 1W5374 FUEL PRIMING & PRIMARY FILTER
c228921 SEBP1625
8N6201 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-2807 [1] NUT  
2. 2J-0157 [1] SEAL-O-RING  
3. 8N-6200 Y [1] PUMP GP-FUEL PRIMING  
4. 1L-3769 [1] RING-RETAINING  
5. 8H-2778 [1] GASKET  
6. 9M-2341 [1] ELEMENT AS (PRIM FILTER)  
7. 8H-2810 [1] CASE AS-FILTER  
8. 7H-9678 [1] RETAINER-ELEMENT  
9. 2H-3429 [1] RING-RETAINING  
10. 7S-9323 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Disassembly and Assembly
Exhaust Manifold - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15

Caterpillar Parts SIS Catalog 160G :

MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
FASTENER GP-EXHAUST MANIFOLD
1W-4486 FASTENER GP-EXHAUST MANIFOLD
DUST EJECTOR GP
4N-8299 DUST EJECTOR GP
MUFFLER GP
4N-8296 MUFFLER GP
AIR COMPRESSOR GP
2W-9270 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7W-8399 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7W-8399 AIR COMPRESSOR GP
LINES GP-AIR COMPRESSOR
7W-8411 LINES GP-AIR COMPRESSOR
CONTROL GP-GOVERNOR
5T-4443 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
5T-4443 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
5T-4443 CONTROL GP-GOVERNOR
PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP
GOVERNOR GP
7W-1488 GOVERNOR GP
GOVERNOR GP
7W-1488 GOVERNOR GP

Truck sale:

 
USD $70,277 
1989 CAT 160G

BIG MACHINERY BV
Velddriel, The Netherlands
1989 CAT 160G
USD $70,041 
1989 CAT 160G

BIG MACHINERY BV
Velddriel, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.