7N-3516 PISTON & ROD GP S/N 11N1-17173 14.5 : 1 RATIO PART OF 2W-1004 ENGINE AR 980C WHEEL LOADER

BASIC ENGINE

PISTON & ROD GP

0. 7N-3516 PISTON & R
1. 7N-3516 PISTON & R
2. 7N-3516 PISTON & R
3. 1W-9373 PISTON GP

CYLINDER BLOCK GP

4. 375-4672 PLUG GP-CY

PULLEY GP

5. 6N-8344 PULLEY GP-
6. 8N-0332 PULLEY GP-

VALVE MECHANISM GP

7. 4N-1045 ROCKER ARM

CRANKSHAFT GP

8. 319-0785 SEAL GP-CR
9. 319-7401 SEAL GP-CR
0. INFORMATION

WHEEL LOADER 980C WHEEL LOADER 63X
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine SEBP1633 980C 63X (1978)

BASIC ENGINE

PISTON & ROD GP

7N-3516 PISTON & ROD GP

1W-9373 PISTON GP

#SEBP16330100

7N-3516: PISTON & ROD GP

PISTON & ROD GP

7N-3516 PISTON & ROD GP
S/N 11N1-17173
14.5 : 1 RATIO
PART OF 2W-1004 ENGINE AR

i00122385 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-1608	[1]	PIN-PISTON
2.	7E-5665 J	[2]	RETAINER-PIN
3.	7E-5996 C	[1]	ROD AS-CONNECTING
3A.	7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
	4P-8495 J	[1]	BUSHING
	7N-2043	[2]	DOWEL
			-OR-
4.	9Y-6400	[1]	ROD AS-CONNECTING
4A.	9Y-6053	[2]	BOLT-CONNECTING ROD (M16X1.5X117-MM)
4B.	9Y-6051 M	[2]	NUT (M16X1.5-THD)
	4P-8495	[1]	BUSHING
5.	9Y-7735 C	[1]	BEARING-CONNECTING ROD (STANDARD)
	7E-0558 AB		BEARING-CONNECTING ROD (0.635-MM US)
	7E-0559 AB		BEARING-CONNECTING ROD (1.27-MM US)
6.	9Y-4004 CJ	[1]	BODY AS-PISTON
7.	7N-7078 CJ	[1]	RING-PISTON (OIL CONTROL)
8.	2P-2817 CJ	[1]	RING-PISTON (INTERMEDIATE)
9.	134-3761 C	[1]	RING-PISTON (TOP)

			AVAILABLE REPAIR KIT(S):
	442-4705 ABJ	[1]	KIT-ENGINE CYLINDER REPAIR
			(INCLUDES RINGS, CONNECTING ROD BEARING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP16330101

7N-3516: PISTON & ROD GP

PISTON & ROD GP

7N-3516 PISTON & ROD GP
S/N 11N17174-17803
14.5 : 1 RATIO
PART OF 2W-1004 ENGINE AR

i02545829 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-2817 J	[1]	RING-PISTON (INTERMEDIATE)
2.	7E-5665 J	[2]	RETAINER-PIN
3.	7E-5996	[1]	ROD AS-CONNECTING
3A.	7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
3B.	4P-8495 J	[1]	BUSHING
3C.	219-4458	[2]	PIN-DOWEL
4.	7N-7078 J	[1]	RING-PISTON (OIL CONTROL)
5.	8N-1608	[1]	PIN-PISTON
6.	328-5573 B	[1]	BEARING-CONNECTING ROD (STANDARD)
7.	134-3761	[1]	RING-PISTON (TOP)
8.	290-0017 CJ	[1]	BODY AS-PISTON

			AVAILABLE REPAIR KIT(S):
	442-4705 ABJ	[1]	KIT-ENGINE CYLINDER REPAIR
			(INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP16330102

7N-3516: PISTON & ROD GP

PISTON & ROD GP

7N-3516 PISTON & ROD GP
S/N 11N17804-99999; BMS101-UP
14.5 : 1 RATIO
PART OF 2W-1004 ENGINE AR, 371-0661 ENGINE AR-CORE

i04416434 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-2817 J	[1]	RING-PISTON (INTERMEDIATE)
2.	7E-5665 J	[2]	RETAINER-PIN
3.	7E-5996	[1]	ROD AS-CONNECTING
3A.	7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
3B.	4P-8495 J	[1]	BUSHING
3C.	219-4458	[2]	PIN-DOWEL
4.	7N-7078 J	[1]	RING-PISTON (OIL CONTROL)
5.	524-5564	[1]	PIN-PISTON
6.	328-5573 B	[1]	BEARING-CONNECTING ROD (STANDARD)
7.	346-3340 CJ	[1]	RING-PISTON (TOP)
8.	378-0509 J	[1]	BODY AS-PISTON

			AVAILABLE REPAIR KIT(S):
	442-4705 ABJ	[1]	KIT-ENGINE CYLINDER REPAIR
			(INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP16330103

1W-9373: PISTON GP

PISTON GP

1W-9373 PISTON GP
S/N 70V20779-UP
PART OF 7N-3516 PISTON & ROD GP

i00121993 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-9372	[1]	BODY AS-PISTON
2.	7N-7078	[1]	RING-PISTON (OIL CONTROL)
3.	2P-2817	[1]	RING-PISTON (INTERMEDIATE)
4.	1W-9460	[1]	RING-PISTON (TOP)
	1W-8922 FA	[1]	RING GP-PISTON (STANDARD)
			(CONSISTS OF A COMPLETE SET OF RINGS FOR ONE PISTON)
	A		NOT PART OF THIS GROUP
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP16330104

375-4672: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

375-4672 PLUG GP-CYLINDER BLOCK
S/N BMS101-UP
PROVIDES PLUG GROUP FOR 3406C MACHINE ENGINE APPLICATION
PART OF 2W-1004 ENGINE AR
FOR USE WITH AIR COMPRESSOR LINES GROUP

i04610850 SEBP1633

3754672 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	309-5131	[1]	PLUG AS
	9S-8006	[1]	PLUG (7/8-14-THD)
	238-5081	[1]	SEAL-O-RING
2.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
3.	7W-6534	[1]	PLUG-PIPE
4.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)

#SEBP16330105

6N-8344: PULLEY GP-AUXILIARY DRIVE

PULLEY GP-AUXILIARY DRIVE

6N-8344 PULLEY GP-AUXILIARY DRIVE
S/N 63X6575-UP
PART OF 2W-1803 INSTALLATION AR-ENGINE

i00158233 SEBP1633

6N8344 PULLEY GP-AUXILIARY DRIVE Parts scheme

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	4N-4534	[1]	PULLEY-CRANKSHAFT (4-GROOVE)
2.	8T-9393	[4]	BOLT (5/8-11X1.5-IN)

#SEBP16330106

8N-0332: PULLEY GP-AUXILIARY DRIVE

PULLEY GP-AUXILIARY DRIVE

8N-0332 PULLEY GP-AUXILIARY DRIVE
S/N 63X6575-UP
PART OF 6W-9801 SUPPRESSION AR-SOUND

i00428183 SEBP1633

8N0332 PULLEY GP-AUXILIARY DRIVE Parts scheme

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	7N-9104	[1]	PULLEY-CRANKSHAFT
2.	0S-1566	[4]	BOLT (5/8-11X1.5-IN)

#SEBP16330107

4N-1045: ROCKER ARM GP

ROCKER ARM GP

4N-1045 ROCKER ARM GP
S/N 11N1-UP; BMS101-UP; 70V20779-UP
PART OF 214-1666, 4N-2271, 4W-2461 VALVE MECHANISM GP

i00122074 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	006-7403	[2]	RING-RETAINING
2.	2N-7228	[2]	WASHER (1X1.5X0.03-IN THK)
3.	4N-0955	[2]	DOWEL
4.	2N-7229	[2]	SPRING
5.	4N-0839	[1]	SHAFT AS-ROCKER ARM
5A.	0L-1022	[2]	PLUG-CUP
6.	2N-7228 B	[2]	WASHER (1X1.5X0.03-IN THK)
7.	9Y-4384	[2]	BRACKET-SHAFT
8.	4N-5614	[6]	ROCKER ARM AS
9.	9Y-4383	[1]	BRACKET-SHAFT
10.	108-5603	[6]	SCREW (3/8-24X1.67-IN)
11.	9L-7712	[6]	NUT (3/8-24-THD)
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP16330108

319-0785: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 11N1-15876; 11N17684-UP; BMS101-UP
PART OF 4N-0741 CRANKSHAFT GP, 6N-9347 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION

i02958100 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	142-5868 J	[1]	SEAL-CRANKSHAFT (REAR)

			CRANKSHAFT SEAL 366-6004 IS AVAILABLE FOR FLOODED CONDITIONS
	J		FOR USE WITH DRY CLUTCH APPLICATIONS

#SEBP16330109

319-7401: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 11N1-UP; BMS101-UP
PART OF 4N-0741, 6I-1001 CRANKSHAFT GP
FOR USE WITH CW ROTATION

i02957871 SEBP1633

For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	142-5867	[1]	SEAL-CRANKSHAFT (FRONT)

Information:

BASIC ENGINE

PISTON & ROD GP

Special Instruction

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

Oil Buildup on Remanufactured Cylinder Packs{1225}
Oil Buildup on Remanufactured Cylinder Packs{1225}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Tool Operating Manual

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Service Magazine

New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 980C :

7N-3516 PISTON & ROD GP

8V-5251 PANEL GP-SOUND SUPPRESSION

2W-0404 PANEL GP-SOUND SUPPRESSION

4N-0771 PAN GP-OIL

374-2261 PAN GP-OIL

359-5150 LINES GP-AIR COMPRESSOR

1N-4470 LINES GP-AIR COMPRESSOR

7N-3516 PISTON & ROD GP

1W-9373 PISTON GP

375-4672 PLUG GP-CYLINDER BLOCK

6N-8344 PULLEY GP-AUXILIARY DRIVE

8N-0332 PULLEY GP-AUXILIARY DRIVE

4N-1045 ROCKER ARM GP

319-0785 SEAL GP-CRANKSHAFT

Truck sale:

Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT

29,900

Caterpillar 980C, Wheel Loaders, Construction

40,336

Caterpillar 980C, Wheel Loaders, Construction

Caterpillar 980C
- Wheel Loaders
MILTON CAT

18.500

Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY