AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-3096 VALVE GP-CHECK S/N 63X9120-UP DEAD ENGINE, LIFT ARM LOWER PART OF 9C-3966 LINES GP-PILOT 980C


HYDRAULIC SYSTEM
VALVE GP-CHECK
VALVE GP-CONTROL

WHEEL LOADER 980C WHEEL LOADER 63X
 980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine SEBP1633 980C 63X   (1978)

HYDRAULIC SYSTEM

VALVE GP-CHECK
VALVE GP-CHECK
9T-3096 VALVE GP-CHECK
 

#SEBP16330600
 

9T-3096: VALVE GP-CHECK

9T-3096 VALVE GP-CHECK
S/N 63X9120-UP
DEAD ENGINE, LIFT ARM LOWER
PART OF 9C-3966 LINES GP-PILOT
i01540255 SEBP1633
9T3096 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP16330601
 

4T-2745: VALVE GP-CONTROL

4T-2745 VALVE GP-CONTROL -AUXILIARY
S/N 63X6575-UP
PART OF 4T-4930, 4T-4931 VALVE GP-CONTROL
i00167583 SEBP1633
4T2745 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0470 B [2] SHIM (0.178-MM THK)  
2. 1U-0471 B [5] SHIM (0.25-MM THK)  
3. 7K-0734 [1] BOLT-LOCKING (7/16-14X0.75-IN)  
4. 3G-8991 [1] SPRING  
5. 8J-1898 B [8] SHIM (0.01-IN THK)  
6. 4D-6433 [1] WASHER-HARD (12X25.5X2-MM THK)  
7. 338-5494 [2] RETAINER  
8. 338-5495 [1] SPRING  
  B   USE AS REQUIRED
 

#SEBP16330602
 

4T-4929: VALVE GP-CONTROL

4T-4929 VALVE GP-CONTROL
S/N 63X6575-UP
PILOT OPERATED
PART OF 9V-2085 VALVE & MTG GP-MAIN CONTROL
Type 1
i00376694 SEBP1633
4T4929 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4936 Y [1] VALVE GP-CONTROL  
2. 1H-9696 [2] SEAL-O-RING  
3. 8S-9191 C [4] BOLT (3/8-16X4-IN)  
4. 5M-2894 C [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 004-1963 C [2] SEAL-O-RING  
6. 4T-4933 Y [1] VALVE GP-RELIEF (ROD END TILT)  
7. 1U-1578 [1] VALVE-CONTROL (VENTED MAKE-UP)  
8. 1J-8960 [1] SPRING  
9. 1U-1577 [1] PLUG  
  6K-6307 [1] SEAL-O-RING  
10. 4T-9312 C [2] HOUSING  
11. 0S-1571 C [4] BOLT (3/8-16X1.75-IN)  
12. 1K-6705 [3] BOLT (1/2-13X0.5-IN)  
  5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 3G-2669 Y [1] VALVE GP-RELIEF (MAIN)  
14. 1U-0323 [3] PLUG AS  
    (EACH INCLUDES)
  1U-0322 [1] BUSHING  
  2S-4078 [3] SEAL-O-RING  
  7S-8491 [3] SPRING  
  7J-7423 [3] VALVE-CONTROL (MAKE UP)  
15. 3G-4117 [1] COVER  
  4J-0522 [1] SEAL-O-RING  
16. 0S-1621 [2] BOLT (1/2-13X1-IN)  
17. 9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
18. 4T-4932 Y [1] VALVE GP-RELIEF (HEAD END TILT)  
19. 4T-9311 C [2] HOUSING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330603
 

4T-4929: VALVE GP-CONTROL

4T-4929 VALVE GP-CONTROL
S/N 63X6575-UP
PILOT OPERATED
PART OF 9V-2085 VALVE & MTG GP-MAIN CONTROL
Type 2
i00169681 SEBP1633
4T4929 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4936 Y [1] VALVE GP-CONTROL (LIFT & TILT)  
2. 1H-9696 [2] SEAL-O-RING  
3. 8S-9191 C [4] BOLT (3/8-16X4-IN)  
4. 5M-2894 C [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 004-1963 C [2] SEAL-O-RING  
6. 4T-4933 Y [1] VALVE GP-RELIEF (LINE,TILT CYL ROD END PORT)  
7. 1U-1578 [1] VALVE-CONTROL  
8. 1J-8960 [1] SPRING  
9. 1U-1577 [1] PLUG  
10. 4T-9312 C [2] HOUSING  
11. 0S-1571 C [4] BOLT (3/8-16X1.75-IN)  
12. 1K-6705 [3] BOLT (1/2-13X0.5-IN)  
13. 6E-1148 Y [1] VALVE GP-RELIEF (MAIN)  
14. 1U-0323 [3] PLUG AS  
  1U-0322 [1] BUSHING  
15. 3G-4117 [1] COVER  
16. 0S-1621 [2] BOLT (1/2-13X1-IN)  
17. 9S-8005 [1] PLUG (3/4-16-THD)  
18. 4T-4932 Y [1] VALVE GP-RELIEF (LINE,TILT CYL HEAD END PORT)  
19. 4T-9311 C [2] HOUSING  
20. 6K-6307 [1] SEAL-O-RING  
21. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 2S-4078 [3] SEAL-O-RING  
23. 7S-8491 [3] SPRING  
24. 7J-7423 [3] VALVE-CONTROL (MAKE-UP)  
25. 4J-0522 [1] SEAL-O-RING  
26. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330604
 

4T-4930: VALVE GP-CONTROL

4T-4930 VALVE GP-CONTROL
S/N 63X6575-UP
PILOT OPERATED
PART OF 4E-0740, 4E-0741 HYDRAULIC AR, 9V-2086 VALVE & MTG GP-MAIN CONTROL
i00376699 SEBP1633
4T4930 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-9191 C [6] BOLT (3/8-16X4-IN)  
2. 5M-2894 C [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 4T-9311 C [3] HOUSING  
4. 4T-4936 Y [1] VALVE GP-CONTROL  
5. 4J-0522 [2] SEAL-O-RING  
6. 4J-0523 [1] SEAL-O-RING  
7. 4T-4935 Y [1] VALVE GP-RELIEF (HEAD END TILT)  
8. 4T-4934 Y [1] VALVE GP-RELIEF (ATTACHMENT LINE)  
9. 4T-4162 Y [1] VALVE GP-RELIEF (ATTACHMENT LINE)  
10. 1H-9696 [3] SEAL-O-RING  
11. 4T-6103 Y [1] VALVE GP-RELIEF  
12. 0S-1571 C [6] BOLT (3/8-16X1.75-IN)  
13. 3G-4135 [1] PLUG  
  7M-8485 [1] SEAL-O-RING  
14. 4T-9312 C [3] HOUSING  
15. 3D-9348 [5] BOLT (1/2-13X7.75-IN)  
16. 1U-0323 [4] PLUG AS  
    (EACH INCLUDES)
  1U-0322 [1] BUSHING  
17. 7S-8491 [4] SPRING  
  7J-7423 [4] VALVE-CONTROL (MAKE UP)  
18. 3G-2669 Y [1] VALVE GP-RELIEF (MAIN IMPLEMENT)  
19. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
20. 1U-1578 [1] VALVE-CONTROL  
21. 1J-8960 [1] SPRING  
22. 1U-1577 [1] PLUG  
  6K-6307 [1] SEAL-O-RING  
23. 4T-2745 Y [1] VALVE GP-CONTROL (AUXILIARY)  
24. 004-1963 C [3] SEAL-O-RING  
25. 2S-4078 [4] SEAL-O-RING  
26. 9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330605
 

4T-4930: VALVE GP-CONTROL

4T-4930 VALVE GP-CONTROL
S/N 63X9120-UP
PILOT OPERATED
PART OF 4E-0740, 4E-0741 HYDRAULIC AR
i00169683 SEBP1633
4T4930 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4936 Y [1] VALVE GP-CONTROL (LIFT AND TILT)  
2. 4T-4162 Y [1] VALVE GP-RELIEF (LINE, AUX CYL ROD END PORT)  
3. 4T-6103 Y [1] VALVE GP-RELIEF (LINE, TILT CYL ROD END PORT)  
4. 004-1963 [3] SEAL-O-RING  
5. 8S-9191 [6] BOLT (3/8-16X4-IN)  
6. 4T-9311 [3] HOUSING  
7. 4J-0522 [2] SEAL-O-RING  
8. 4T-2745 Y [1] VALVE GP-CONTROL (AUXILIARY)(AUXILIARY)  
9. 4J-0523 [1] SEAL-O-RING  
10. 3G-4135 [1] PLUG  
11. 7M-8485 [1] SEAL-O-RING  
12. 4T-4934 Y [1] VALVE GP-RELIEF (LINE, AUX CYL HEAD END PORT)  
13. 4T-4935 Y [1] VALVE GP-RELIEF (LINE,TILT CYL HEAD END PORT)  
14. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
15. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 7J-7423 [4] VALVE-CONTROL (MAKE UP)  
17. 7S-8491 [4] SPRING  
18. 1U-0323 [4] PLUG AS  
    (EACH INCLUDES)
  1U-0322 [1] BUSHING  
19. 2S-4078 [4] SEAL-O-RING  
20. 3D-9348 [5] BOLT (1/2-13X7.75-IN)  
21. 6E-1148 CY [1] VALVE GP-RELIEF (MAIN)  
22. 4T-9312 [3] HOUSING  
23. 1U-1577 [1] PLUG  
24. 6K-6307 [1] SEAL-O-RING  
25. 1J-8960 [1] SPRING  
26. 1U-1578 [1] VALVE-CONTROL  
27. 1H-9696 [3] SEAL-O-RING  
28. 9S-4182 [1] PLUG (7/16-20-THD)  
29. 3J-7354 [1] SEAL-O-RING  
30. 9S-8005 [1] PLUG (3/4-16-THD)  
31. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330606
 

4T-4931: VALVE GP-CONTROL

4T-4931 VALVE GP-CONTROL
S/N 63X6575-UP
PILOT OPERATED
PART OF 4E-0742, 9V-2815 HYDRAULIC AR-3 VALVE
i00169685 SEBP1633
4T4931 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2745 Y [1] VALVE GP-CONTROL (AUXILIARY)  
2. 4T-4162 Y [1] VALVE GP-RELIEF  
3. 2S-4078 [1] SEAL-O-RING  
4. 7S-8491 [1] SPRING  
5. 7J-7423 [1] VALVE-CONTROL (MAKE UP)  
6. 1U-0323 [1] PLUG AS  
  1U-0322 [1] BUSHING  
7. 4T-4934 Y [1] VALVE GP-RELIEF  
8. 8T-9378 C [2] BOLT (3/8-16X4-IN)  
9. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 9S-4182 [3] PLUG (7/16-20-THD)  
  3J-7354 [3] SEAL-O-RING  
11. 4T-9311 C [1] HOUSING  
12. 004-1963 C [1] SEAL-O-RING  
13. 4J-0522 [2] SEAL-O-RING  
14. 4J-0523 [1] SEAL-O-RING  
15. 1H-9696 [1] SEAL-O-RING  
16. 4T-9312 C [1] HOUSING  
17. 5S-7383 C [2] BOLT (3/8-16X1.75-IN)  
18. 8T-9392 [5] BOLT (1/2-13X7.5-IN)  
19. 3G-4135 [1] PLUG  
20. 7M-8485 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330607
 

4T-4936: VALVE GP-CONTROL

4T-4936 VALVE GP-CONTROL
S/N 63X6575-UP
PART OF 4T-4929, 4T-4930 VALVE GP-CONTROL
Type 1
i00376702 SEBP1633
4T4936 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-0734 [2] BOLT-LOCKING (7/16-14X0.75-IN)  
2. 4D-6433 [2] WASHER-HARD (12X25.5X2-MM THK)  
3. 1U-0470 B [4] SHIM (0.178-MM THK)  
4. 1U-0471 B [4] SHIM (0.25-MM THK)  
5. 8J-1898 CB [24] SHIM (0.01-IN THK)  
6. 4T-0470 [2] SPRING  
7. 3G-8991 [2] SPRING  
8. 9T-5427 C [4] RETAINER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16330608
 

4T-4936: VALVE GP-CONTROL

4T-4936 VALVE GP-CONTROL
S/N 63X6575-UP
PART OF 4T-4929, 4T-4930 VALVE GP-CONTROL
Type 2
i00169689 SEBP1633
4T4936 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0470 B [4] SHIM (0.178-MM THK)  
2. 1U-0471 B [10] SHIM (0.25-MM THK)  
3. 3G-8991 [2] SPRING (INNER)  
4. 8J-1898 BC [16] SHIM (0.01-IN THK)  
5. 338-5494 C [4] RETAINER  
6. 338-5495 [2] SPRING (OUTER)  
7. 354-9327 [1] VALVE GP-CONTROL  
8. 4D-6433 [2] WASHER-HARD (12X25.5X2-MM THK)  
9. 7K-0734 [2] BOLT-LOCKING (7/16-14X0.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16330609
 

8P-9711: VALVE GP-CONTROL

8P-9711 VALVE GP-CONTROL
S/N 3ZE1-UP
NEUTRALIZER, SELECTOR & PRESSURE
PART OF 8P-9713 CONTROL GP-TRANSMISSION HYD
Type 1
i00420364 SEBP1633
8P9711 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3201 YC [1] VALVE GP-SELECTOR & PRESS CONT  
2. 5M-6214 [4] PLUG (1/8-27 PTF)  
3. 5L-1761 [26] BOLT (5/16-18X5.5-IN)  
  9M-1974 [26] WASHER-HARD (8.8X16X2-MM THK)  
4. 6T-7629 C [1] MANIFOLD-TOP  
5. 6T-7628 C [1] PLATE-DIVIDER  
6. 9G-6597 Y [1] VALVE GP-NEUTRALIZER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 980C :

VALVE GP-BREAKER RELIEF
6E-3528 VALVE GP-BREAKER RELIEF
VALVE & MTG GP-MAIN CONTROL
9V-2086 VALVE & MTG GP-MAIN CONTROL
VALVE & MTG GP-MAIN CONTROL
9V-2085 VALVE & MTG GP-MAIN CONTROL
TANK GP-HYDRAULIC
9C-5789 TANK GP-HYDRAULIC
TANK GP-HYDRAULIC
9C-5788 TANK GP-HYDRAULIC
3V-6426 TANK GP-HYDRAULIC
TANK GP-HYDRAULIC
3V-6426 TANK GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7835 TANK & FILTER GP-HYDRAULIC
VALVE GP-CONTROL
4T-2745 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4929 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4929 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4930 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4930 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4931 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4936 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4936 VALVE GP-CONTROL

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.