AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8P-9711 VALVE GP-CONTROL S/N 3ZE1-UP NEUTRALIZER, SELECTOR & PRESSURE PART OF 8P-9713 CONTROL GP-TRANSMISSION HYD Type 2 980C


HYDRAULIC SYSTEM
VALVE GP-CONTROL
VALVE GP-PILOT

WHEEL LOADER 980C WHEEL LOADER 63X
 980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine SEBP1633 980C 63X   (1978)

HYDRAULIC SYSTEM

VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4936 VALVE GP-CONTROL
VALVE GP-CONTROL
8P-9711 VALVE GP-CONTROL
VALVE GP-CONTROL
8P-9711 VALVE GP-CONTROL
 

#SEBP16330610
 

8P-9711: VALVE GP-CONTROL

8P-9711 VALVE GP-CONTROL
S/N 3ZE1-UP
NEUTRALIZER, SELECTOR & PRESSURE
PART OF 8P-9713 CONTROL GP-TRANSMISSION HYD
Type 2
i00169801 SEBP1633
8P9711 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-2343 YC [1] VALVE GP-SELECTOR & PRESS CONT  
2. 5M-6214 [4] PLUG (1/8-27 PTF)  
3. 5L-1761 [26] BOLT (5/16-18X5.5-IN)  
  9M-1974 [26] WASHER-HARD (8.8X16X2-MM THK)  
4. 6T-7629 [1] MANIFOLD-TOP  
5. 6T-7628 [1] PLATE-DIVIDER  
6. 9G-6597 Y [1] VALVE GP-NEUTRALIZER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330611
 

1U-2172: VALVE GP-PILOT

1U-2172 VALVE GP-PILOT
S/N 63X6575-6696
PART OF 9V-2116 LINES GP-PILOT
i00353940 SEBP1633
1U2172 VALVE GP-PILOT Parts scheme 1U2172 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-9005 [2] ACTUATOR  
2. 1U-2176 [4] SLEEVE  
3. 1U-2234 [4] NUT  
4. 6V-2483 [1] SEAL-O-RING  
5. 1U-2071 [4] RETAINER  
6. 3G-9003 [4] SPRING (OUTER)  
7. 1U-2173 [1] VALVE GP  
8. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
10. 3G-9859 [4] SPRING (INNER)  
11. 1U-2070 [4] RETAINER  
12. 5S-7018 B [8] SPACER (7.54X14.15X0.25-MM THK)  
13. 3G-8998 [4] PLUNGER  
14. 009-0008 [4] SETSCREW-SOCKET (3/8-16X0.5-IN)  
15. 1U-2074 [1] COVER  
16. 0S-1619 [2] BOLT (3/8-16X3-IN)  
  6M-5062 [2] SEAL-O-RING  
17. 5H-3182 [2] PIN-SPRING  
18. 9S-8006 [2] PLUG (7/8-14-THD)  
  2M-9780 [2] SEAL-O-RING  
19. 4J-3044 [4] BEARING AS-NEEDLE  
20. 3G-9004 [2] SHAFT  
21. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
  2M-9780 [4] SEAL-O-RING  
22. 1U-2175 [1] SCREEN AS  
23. 1U-2067 [1] RETAINER  
24. 0L-0723 [4] WASHER (0.656X0.906X0.049-IN THK)  
25. 7J-7673 [2] SEAL-LIP TYPE  
26. 0T-0431 C [1] WASHER (10.3X19X2.5-MM THK)  
27. 5V-7161 C [2] LEVER  
28. 0S-1591 C [2] BOLT (3/8-16X1.5-IN)  
  1D-4717 C [2] NUT (3/8-16-THD)  
29. 1B-8702 C [2] KEY-WOODRUFF  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16330612
 

1U-2172: VALVE GP-PILOT

1U-2172 VALVE GP-PILOT
S/N 63X6697-UP
PART OF 9V-2116 LINES GP-PILOT
i00353943 SEBP1633
1U2172 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-9005 [2] ACTUATOR  
2. 1U-2176 [4] SLEEVE  
3. 1U-2234 [4] NUT  
4. 6V-2483 [1] SEAL-O-RING  
5. 1U-2071 [4] RETAINER  
6. 3G-9003 [4] SPRING (OUTER)  
7. 9T-3062 C [1] VALVE GP  
8. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
9. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
10. 3G-9859 [4] SPRING (INNER)  
11. 1U-2070 [4] RETAINER  
12. 5S-7018 B [8] SPACER (7.54X14.15X0.25-MM THK)  
13. 3G-8998 [4] PLUNGER  
14. 009-0008 [4] SETSCREW-SOCKET (3/8-16X0.5-IN)  
15. 1U-2074 [1] COVER  
16. 0T-0573 C [2] BOLT (3/8-16X2.75-IN)  
17. 5H-3182 [2] PIN-SPRING  
18. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
19. 4J-3044 [4] BEARING AS-NEEDLE  
20. 3G-9004 [2] SHAFT  
21. 148-8410 [4] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
22. 1U-2175 [1] SCREEN AS  
23. 1U-2067 [1] RETAINER  
24. 0L-0723 [8] WASHER (0.656X0.906X0.049-IN THK)  
25. 7J-7673 [2] SEAL-LIP TYPE  
26. 0T-0431 [1] WASHER (10.3X19X2.5-MM THK)  
27. 6W-7373 C [1] LEVER  
28. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
29. 1B-8702 [2] KEY-WOODRUFF  
30. 5H-6005 C [2] SEAL-O-RING  
31. 1D-4717 [2] NUT (3/8-16-THD)(FULL)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16330613
 

1U-2620: VALVE GP-PILOT

1U-2620 VALVE GP-PILOT
S/N 63X6575-9119
PART OF 9V-2115 LINES GP-PILOT
i00354109 SEBP1633
1U2620 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2764 [1] ACTUATOR  
2. 1B-4427 [2] NUT-JAM (1/4-20-THD)  
3. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
4. 044-3165 [1] PIN  
5. 1U-3147 [2] SEAL-U-CUP  
6. 033-6044 [2] SEAL-O-RING  
7. 9S-4191 [5] PLUG (9/16-18-THD)  
8. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
9. 1U-2621 [1] VALVE GP  
10. 3G-9003 [2] SPRING  
11. 3G-9859 [2] SPRING  
12. 1U-2070 [2] RETAINER  
13. 5S-7018 [4] SPACER (7.54X14.15X0.25-MM THK)  
14. 1U-2071 [2] RETAINER  
15. 1U-2762 [1] BRACKET-PIVOT  
16. 8J-1622 [2] NUT (7/8-20-THD)  
17. 1U-2751 [2] SLEEVE  
18. 1U-2752 [2] PLUNGER  
19. 1U-2765 [1] BOOT  
20. 9M-4252 [2] BUSHING  
21. 3D-4603 [1] PLUG-PIPE  
22. 9S-8004 [2] PLUG (9/16-18-THD)  
23. 3J-1907 [7] SEAL-O-RING  
 

#SEBP16330614
 

6E-3134: VALVE GP-PILOT

6E-3134 VALVE GP-PILOT
S/N 63X9294-9744
PART OF 9C-3963 CONTROL GP-PILOT OPERATED HYD
i00167633 SEBP1633
6E3134 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0737 [3] ROD  
  6V-8189 [6] NUT (5/16-18-THD)  
2. 5P-6718 [1] SEAL-O-RING  
3. 9T-6648 Y [1] VALVE GP-PILOT (TILT)  
4. 6V-3683 [1] SEAL-O-RING  
5. 9T-6649 Y [1] VALVE GP-PILOT (LIFT)  
6. 6E-0742 [4] BODY-MAGNET  
7. 6E-0740 [1] PLATE AS-MOUNTING  
8. 6E-0747 [2] BOOT  
9. 6E-0741 [4] SPRING  
10. 8C-9682 [4] CLAPPER  
11. 6E-0739 [2] CLAMP  
12. 8C-9635 [2] COIL AS  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
13. 7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
14. 5B-2183 [2] NUT-JAM (9/16-18-THD)  
15. 6E-3412 [2] BOLT-PIVOT  
16. 6E-3413 [2] NUT  
17. 6E-0750 [2] BRACKET-PIVOT  
18. 6E-3411 [2] PLATE  
19. 6E-0746 [1] SLEEVE  
20. 8C-9683 [4] PLUNGER AS  
21. 9X-5993 [4] BOLT-SOCKET HEAD (5/16-18X4-IN)  
22. 8C-9634 [1] COIL AS  
  1S-9593 [1] STRAP-CABLE  
23. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
24. 6E-0755 [2] PIN-PIVOT  
  7S-9930 [4] RING-RETAINING  
25. 6E-2464 [4] GASKET  
26. 6E-2465 [4] GASKET  
27. 6E-2466 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330615
 

6E-3135: VALVE GP-PILOT

6E-3135 VALVE GP-PILOT
S/N 63X9120-UP
PART OF 9C-4617 CONTROL GP-PILOT OPERATED HYD
i00167634 SEBP1633
6E3135 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0738 [3] ROD  
  6V-8189 [6] NUT (5/16-18-THD)  
2. 5P-6718 [2] SEAL-O-RING  
3. 9T-6648 Y [1] VALVE GP-PILOT (TILT)  
4. 6V-3683 [2] SEAL-O-RING  
5. 9T-6650 Y [1] VALVE GP-PILOT (AUXILIARY)  
6. 9T-6649 Y [1] VALVE GP-PILOT (LIFT)  
7. 6E-0742 [6] BODY-MAGNET  
8. 6E-0756 [1] PLATE AS-MOUNTING  
9. 6E-0747 [3] BOOT  
10. 6E-0741 [6] SPRING  
11. 8C-9682 [6] CLAPPER  
12. 6E-0739 [3] CLAMP  
13. 8C-9635 [2] COIL AS  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
14. 7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
15. 9X-5993 [6] BOLT-SOCKET HEAD (5/16-18X4-IN)  
16. 5B-2183 [3] NUT-JAM (9/16-18-THD)  
17. 6E-3412 [3] BOLT-PIVOT  
18. 6E-3413 [3] NUT  
19. 6E-0755 [3] PIN-PIVOT  
  7S-9930 [6] RING-RETAINING  
20. 6E-0750 [3] BRACKET-PIVOT  
21. 6E-3411 [3] PLATE  
22. 6E-0746 [3] SLEEVE  
23. 8C-9683 [6] PLUNGER AS  
24. 8C-9634 [1] COIL AS  
  1S-9593 [2] STRAP-CABLE  
25. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
26. 6E-2464 [6] GASKET  
27. 6E-2465 [6] GASKET  
28. 6E-2466 [6] WASHER  
   
    AVAILABLE REPAIR KIT(S):
  6E-2526 [1] KIT-SERVICE  
    (PROVIDES OPTIONAL INSTALLATION OF A DETENT IN THE PILOT VALVE.)
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330616
 

6E-4020: VALVE GP-PILOT

6E-4020 VALVE GP-PILOT
S/N 63X9745-UP
PART OF 9C-3963 CONTROL GP-PILOT OPERATED HYD
i00167639 SEBP1633
6E4020 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0737 [3] ROD  
  6V-8189 [6] NUT (5/16-18-THD)  
2. 5P-6718 [1] SEAL-O-RING  
3. 9T-6648 Y [1] VALVE GP-PILOT (TILT)  
4. 6V-3683 [1] SEAL-O-RING  
5. 9T-6649 Y [1] VALVE GP-PILOT (LIFT)  
6. 6E-0742 [4] BODY-MAGNET  
7. 6E-0740 [1] PLATE AS-MOUNTING  
8. 6E-5237 [2] BOOT  
9. 107-4430 [4] SPRING  
10. 8C-9682 [4] CLAPPER  
11. 6E-5238 [2] CLAMP  
12. 8C-9635 [2] COIL AS  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
13. 7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
14. 5B-2183 [2] NUT-JAM (9/16-18-THD)  
15. 6E-3412 [2] BOLT-PIVOT  
16. 6E-3413 [2] NUT  
17. 6E-0750 [2] BRACKET-PIVOT  
18. 6E-3411 [2] PLATE  
19. 6E-0746 [1] SLEEVE  
20. 8C-9683 [4] PLUNGER AS  
21. 9X-5993 [4] BOLT-SOCKET HEAD (5/16-18X4-IN)  
22. 8C-9634 [1] COIL AS  
  1S-9593 [1] STRAP-CABLE  
23. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
24. 6E-0755 [2] PIN-PIVOT  
  7S-9930 [4] RING-RETAINING  
25. 6E-2464 [4] GASKET  
26. 6E-2465 [4] GASKET  
27. 6E-2466 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330617
 

6E-4021: VALVE GP-PILOT

6E-4021 VALVE GP-PILOT
S/N 63X9120-UP
PART OF 9C-4617 CONTROL GP-PILOT OPERATED HYD
i00167640 SEBP1633
6E4021 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0738 [3] ROD  
  6V-8189 [6] NUT (5/16-18-THD)  
2. 5P-6718 [2] SEAL-O-RING  
3. 9T-6648 Y [1] VALVE GP-PILOT (TILT)  
4. 6V-3683 [2] SEAL-O-RING  
5. 9T-6650 Y [1] VALVE GP-PILOT (AUXILIARY)  
6. 9T-6649 Y [1] VALVE GP-PILOT (LIFT)  
7. 6E-0742 [6] BODY-MAGNET  
8. 6E-0756 [1] PLATE AS-MOUNTING  
9. 6E-5237 [3] BOOT  
10. 107-4430 [6] SPRING  
11. 8C-9682 [6] CLAPPER  
12. 6E-5238 [3] CLAMP  
13. 8C-9635 [2] COIL AS  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
14. 7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
15. 9X-5993 [6] BOLT-SOCKET HEAD (5/16-18X4-IN)  
16. 5B-2183 [3] NUT-JAM (9/16-18-THD)  
17. 6E-3412 [3] BOLT-PIVOT  
18. 6E-3413 [3] NUT  
19. 6E-0755 [3] PIN-PIVOT  
  7S-9930 [6] RING-RETAINING  
20. 6E-0750 [3] BRACKET-PIVOT  
21. 6E-3411 [3] PLATE  
22. 6E-0746 [3] SLEEVE  
23. 8C-9683 [6] PLUNGER AS  
24. 8C-9634 [1] COIL AS  
  1S-9593 [2] STRAP-CABLE  
25. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
26. 6E-2464 [6] GASKET  
27. 6E-2465 [6] GASKET  
28. 6E-2466 [6] WASHER  
   
    AVAILABLE REPAIR KIT(S):
  6E-2526 [1] KIT-SERVICE  
    (PROVIDES OPTIONAL INSTALLATION OF A DETENT IN THE PILOT VALVE.)
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330618
 

9T-6061: VALVE GP-PILOT

9T-6061 VALVE GP-PILOT
S/N 63X9120-9293
PART OF 9C-3963 CONTROL GP-PILOT OPERATED HYD
i00167984 SEBP1633
9T6061 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0737 [3] ROD  
  6V-8189 [6] NUT (5/16-18-THD)  
2. 5P-6718 [1] SEAL-O-RING  
3. 9T-6648 Y [1] VALVE GP-PILOT (TILT)  
4. 6V-3683 [1] SEAL-O-RING  
5. 9T-6649 Y [1] VALVE GP-PILOT (LIFT)  
6. 6E-0742 [4] BODY-MAGNET  
7. 6E-0740 [1] PLATE AS-MOUNTING  
8. 6E-0747 [2] BOOT  
9. 6E-0741 [4] SPRING  
10. 8C-9682 [4] CLAPPER  
11. 6E-0739 [2] CLAMP  
12. 8C-9635 [2] COIL AS  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
13. 7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
14. 1B-4430 [2] NUT-JAM (1/2-20-THD)  
15. 6E-0751 [2] BOLT-PIVOT  
16. 6E-0752 [2] NUT  
17. 6E-0750 [2] BRACKET-PIVOT  
18. 6E-0749 [2] PLATE  
19. 6E-0746 [1] SLEEVE  
20. 8C-9683 [4] PLUNGER AS  
21. 9X-5993 [4] BOLT-SOCKET HEAD (5/16-18X4-IN)  
22. 8C-9634 [1] COIL AS  
  1S-9593 [1] STRAP-CABLE  
23. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
24. 6E-0755 [2] PIN-PIVOT  
  7S-9930 [4] RING-RETAINING  
25. 6E-2464 [4] GASKET  
26. 6E-2465 [4] GASKET  
27. 6E-2466 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16330619
 

9T-6062: VALVE GP-PILOT

9T-6062 VALVE GP-PILOT
S/N 63X9120-UP
PART OF 9C-4617 CONTROL GP-PILOT OPERATED HYD
i00167985 SEBP1633
9T6062 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0738 [3] ROD  
  6V-8189 [6] NUT (5/16-18-THD)  
2. 5P-6718 [2] SEAL-O-RING  
3. 9T-6648 Y [1] VALVE GP-PILOT (TILT)  
4. 6V-3683 [2] SEAL-O-RING  
5. 9T-6650 Y [1] VALVE GP-PILOT (AUXILIARY)  
6. 9T-6649 Y [1] VALVE GP-PILOT (LIFT)  
7. 6E-0742 [6] BODY-MAGNET  
8. 6E-0756 [1] PLATE AS-MOUNTING  
9. 6E-0747 [3] BOOT  
10. 6E-0741 [6] SPRING  
11. 8C-9682 [6] CLAPPER  
12. 6E-0739 [3] CLAMP  
13. 8C-9635 [2] COIL AS  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
14. 7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
15. 9X-5993 [6] BOLT-SOCKET HEAD (5/16-18X4-IN)  
16. 1B-4430 [3] NUT-JAM (1/2-20-THD)  
17. 6E-0751 [3] BOLT-PIVOT  
18. 6E-0752 [3] NUT  
19. 6E-0755 [3] PIN-PIVOT  
  7S-9930 [6] RING-RETAINING  
20. 6E-0750 [3] BRACKET-PIVOT  
21. 6E-0749 [3] PLATE  
22. 6E-0746 [3] SLEEVE  
23. 8C-9683 [6] PLUNGER AS  
24. 8C-9634 [1] COIL AS  
  1S-9593 [2] STRAP-CABLE  
25. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
26. 6E-2464 [6] GASKET  
27. 6E-2465 [6] GASKET  
28. 6E-2466 [6] WASHER  
   
    AVAILABLE REPAIR KIT(S):
  6E-2526 [1] KIT-SERVICE  
    (PROVIDES OPTIONAL
    INSTALLATION OF A
    DETENT IN THE PILOT
    VALVE.)
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

Caterpillar Parts SIS Catalog 980C :

VALVE GP-CONTROL
8P-9711 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4936 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4936 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4931 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4930 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4930 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4929 VALVE GP-CONTROL
VALVE GP-CONTROL
4T-4929 VALVE GP-CONTROL
VALVE GP-PILOT
1U-2172 VALVE GP-PILOT
VALVE GP-PILOT
1U-2172 VALVE GP-PILOT
VALVE GP-PILOT
1U-2620 VALVE GP-PILOT
VALVE GP-PILOT
6E-3134 VALVE GP-PILOT
VALVE GP-PILOT
6E-3135 VALVE GP-PILOT
VALVE GP-PILOT
6E-4020 VALVE GP-PILOT
VALVE GP-PILOT
6E-4021 VALVE GP-PILOT
VALVE GP-PILOT
9T-6061 VALVE GP-PILOT

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.