OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-PILOT OPERATED HYD
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP16330690
7V-3674: CONTROL GP-HYDRAULIC HAND
7V-3674 CONTROL GP-HYDRAULIC HAND
S/N 63X6575-9119
PART OF 6W-6818 OPERATOR AR
S/N 63X6575-9119
PART OF 6W-6818 OPERATOR AR
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 2. | 3V-0060 | [4] | BEARING | |
| 3. | 1V-8230 | [1] | SPACER (0.531X1X0.57-IN THK) | |
| 4. | 9K-4848 | [4] | WASHER-THRUST | |
| 5. | 3V-9856 | [1] | SHAFT AS | |
| 6. | 5V-7162 | [2] | ROD END | |
| 7. | 4V-0155 | [1] | BRACKET | |
| 8. | 5V-0526 | [1] | PANEL | |
| 9. | 4V-1132 | [1] | BRACKET AS | |
| 10. | 5P-1075 | [14] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 7V-7699 | [1] | LEVER | |
| 12. | 8T-9364 | [5] | BOLT (1/4-20X0.625-IN) | |
| 5P-4115 | [5] | WASHER-HARD (7.2X19X2-MM THK) | ||
| 13. | 7D-9722 | [2] | SPRING | |
| 14. | 9J-5846 | [2] | ROLLER-CAM | |
| 15. | 5V-7160 | [2] | LINK | |
| 16. | 6W-0657 C | [2] | ROD-CLEVIS | |
| 17. | 5S-9607 C | [4] | LOCKNUT | |
| 18. | 9X-5301 | [2] | SOLENOID AS | |
| (EACH INCLUDES) | ||||
| 9G-9508 | [2] | BOOT | ||
| 6V-8377 | [2] | NUT (8-32-THD) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 19. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 20. | 3V-3424 | [1] | BRACKET AS | |
| 21. | 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | |
| 22. | 2V-2189 | [1] | BAR | |
| 23. | 7V-5570 | [1] | BRACKET AS | |
| 24. | 4L-9337 C | [2] | BOLT (3/8-16X1.5-IN) | |
| 25. | 1D-4717 C | [4] | NUT (3/8-16-THD) | |
| 26. | 8T-8889 | [2] | BOLT (3/8-24X1.25-IN) | |
| 2L-6267 | [2] | LOCKNUT (3/8-24-THD) | ||
| 27. | 7V-5172 | [1] | SHEET AS | |
| 28. | 7V-5167 | [1] | BRACKET | |
| 29. | 5M-3062 C | [4] | BOLT (3/8-16X0.75-IN) | |
| 30. | 7M-0706 | [2] | KNOB (GEARSHIFT) | |
| 31. | 5B-9079 | [2] | NUT-JAM (3/8-24-THD) | |
| 32. | 8T-2501 | [1] | BOLT (3/8-16X2-IN) | |
| 33. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 34. | 7X-0288 | [1] | BOLT (3/8-16X1.625-IN) | |
| 35. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 36. | 5P-1075 | [12] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 37. | 1S-3584 | [2] | NUT-FULL (3/8-24 LH-THD) | |
| 38. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 39. | 9F-5959 | [1] | BOLT-SPECIAL | |
| -OR- | ||||
| 031-2701 | [1] | BOLT-LOCKING (5/16-18X1.25-IN) | ||
| 40. | 5V-7165 | [2] | ROD AS | |
| 41. | 9S-1303 | [2] | PIN | |
| 42. | 3B-4607 | [3] | PIN-COTTER | |
| 43. | 7X-3183 | [2] | BOLT (3/8-24X1-IN) | |
| 44. | 7V-5169 | [1] | PLATE | |
| 45. | 3V-2351 | [2] | RING-RETAINING | |
| 46. | 2V-7857 | [2] | BEARING | |
| 47. | 3V-9863 | [1] | BEARING | |
| 48. | 8V-6907 | [1] | LEVER | |
| 49. | 3V-3355 | [2] | BEARING | |
| 50. | 8V-6906 | [1] | LEVER | |
| 51. | 4D-2619 | [1] | BEARING | |
| 52. | 7V-3826 | [1] | BELLCRANK | |
| 53. | 6B-4196 C | [2] | WASHER-THRUST (16.25X26.97X2.36-MM THK) | |
| 54. | 5M-3062 C | [6] | BOLT (3/8-16X0.75-IN) | |
| 55. | 5V-8784 | [1] | LEVER AS (LIFT ARM) | |
| 56. | 1B-8702 | [2] | KEY-WOODRUFF | |
| 57. | 2V-7859 C | [3] | BEARING | |
| 58. | 5V-8782 | [1] | LEVER AS | |
| (BUCKET CONTROL) | ||||
| 59. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 60. | 4B-3057 | [1] | PIN-CLEVIS | |
| 61. | 5V-7163 | [2] | ROD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP16330691
7V-3762: CONTROL GP-PILOT OPERATED HYD
7V-3762 CONTROL GP-PILOT OPERATED HYD
S/N 63X6575-9119
3 VALVE
PART OF 6W-8937 HYDRAULIC AR, 9V-2815 HYDRAULIC AR-3 VALVE, 6W-5632, 8R-2151 LOADER AR-LOG
S/N 63X6575-9119
3 VALVE
PART OF 6W-8937 HYDRAULIC AR, 9V-2815 HYDRAULIC AR-3 VALVE, 6W-5632, 8R-2151 LOADER AR-LOG
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-8783 | [1] | LEVER AS | |
| 2. | 7M-0706 | [1] | KNOB | |
| 3. | 5B-9079 | [1] | NUT-JAM (3/8-24-THD) | |
| 4. | 7V-5492 | [1] | LEVER AS | |
| 5. | 4V-3743 | [2] | BEARING | |
| 6. | 1B-8702 | [1] | KEY-WOODRUFF | |
| 7. | 4V-3742 | [2] | BEARING | |
| 8. | 3V-3355 | [2] | BEARING | |
| 9. | 7V-5486 | [1] | LEVER | |
| 10. | 4L-9337 | [3] | BOLT (3/8-16X1.5-IN) | |
| 11. | 7V-5490 | [1] | LINK | |
| 12. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 13. | 7V-5488 | [1] | LEVER | |
| 14. | 7X-3195 | [1] | BOLT (1/2-20X1.25-IN) | |
| 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 15. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 16. | 4V-4353 | [1] | PLATE-INSTRUCTION |
#SEBP16330692
9C-3963: CONTROL GP-PILOT OPERATED HYD
9C-3963 CONTROL GP-PILOT OPERATED HYD
S/N 63X9120-9293
2 VALVE
PART OF 6W-6818 OPERATOR AR
S/N 63X9120-9293
2 VALVE
PART OF 6W-6818 OPERATOR AR
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 9C-4555 | [1] | SPRING (INNER) | |
| 4. | 9C-4554 | [1] | SPRING (OUTER) | |
| 5. | 5V-8780 | [1] | KNOB | |
| 8R-5003 | [1] | ROD (HYD CONTROL) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 6. | 8R-6701 | [1] | BOSS | |
| 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | ||
| 2V-7859 | [1] | BEARING | ||
| 7. | 9C-2640 | [1] | ROD (TILT) | |
| 8. | 9S-5585 | [2] | NUT-FULL (1/2-20-THD) | |
| 9. | 7M-0706 | [2] | KNOB | |
| 5B-9079 | [2] | NUT-JAM (3/8-24-THD) | ||
| 10. | 9C-2639 | [1] | ROD (LIFT) | |
| 11. | 9C-4559 | [1] | SUPPORT AS | |
| 12. | 9C-4553 | [1] | GATE | |
| 13. | 9C-4552 | [1] | SHAFT AS | |
| 5H-9809 | [1] | PIN | ||
| 14. | 6W-9580 | [1] | PANEL | |
| 15. | 9T-6061 Y | [1] | VALVE GP-PILOT | |
| 16. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 17. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 18. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 19. | 9C-4556 | [1] | BRACKET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330693
9C-3963: CONTROL GP-PILOT OPERATED HYD
9C-3963 CONTROL GP-PILOT OPERATED HYD
S/N 63X9294-9744
2 VALVE
PART OF 6W-6818 OPERATOR AR
S/N 63X9294-9744
2 VALVE
PART OF 6W-6818 OPERATOR AR
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 9C-4555 | [1] | SPRING (INNER) | |
| 4. | 9C-4554 | [1] | SPRING (OUTER) | |
| 5. | 5V-8780 | [1] | KNOB | |
| 8R-5003 | [1] | ROD (HYD CONTROL) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 6. | 8R-6701 | [1] | BOSS | |
| 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | ||
| 2V-7859 | [1] | BEARING | ||
| 7. | 9C-2640 | [1] | ROD (TILT) | |
| 8. | 9S-5585 | [2] | NUT-FULL (1/2-20-THD) | |
| 9. | 7M-0706 | [2] | KNOB | |
| 5B-9079 | [2] | NUT-JAM (3/8-24-THD) | ||
| 10. | 9C-2639 | [1] | ROD (LIFT) | |
| 11. | 9C-4559 | [1] | SUPPORT AS | |
| 12. | 9C-4553 | [1] | GATE | |
| 13. | 9C-4552 | [1] | SHAFT AS | |
| 5H-9809 | [1] | PIN | ||
| 14. | 6W-9580 | [1] | PANEL | |
| 15. | 6E-3134 CY | [1] | VALVE GP-PILOT | |
| 16. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 17. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 18. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 19. | 9C-4556 | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330694
9C-3963: CONTROL GP-PILOT OPERATED HYD
9C-3963 CONTROL GP-PILOT OPERATED HYD
S/N 63X9745-UP
2 VALVE
PART OF 6W-6818 OPERATOR AR
S/N 63X9745-UP
2 VALVE
PART OF 6W-6818 OPERATOR AR
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 9C-4555 | [1] | SPRING (INNER) | |
| 4. | 9C-4554 | [1] | SPRING (OUTER) | |
| 5. | 5V-8780 | [1] | KNOB | |
| 8R-5003 | [1] | ROD (HYD CONTROL) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 6. | 8R-6701 | [1] | BOSS | |
| 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | ||
| 2V-7859 | [1] | BEARING | ||
| 7. | 9C-2640 | [1] | ROD (TILT) | |
| 8. | 9S-5585 | [2] | NUT-FULL (1/2-20-THD) | |
| 9. | 7M-0706 | [2] | KNOB | |
| 5B-9079 | [2] | NUT-JAM (3/8-24-THD) | ||
| 10. | 9C-2639 | [1] | ROD (LIFT) | |
| 11. | 9C-4559 | [1] | SUPPORT AS | |
| 12. | 9C-4553 | [1] | GATE | |
| 13. | 9C-4552 | [1] | SHAFT AS | |
| 5H-9809 | [1] | PIN | ||
| 14. | 6W-9580 | [1] | PANEL | |
| 15. | 6E-4020 CY | [1] | VALVE GP-PILOT | |
| 16. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 17. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 18. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 19. | 9C-4556 | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330695
9C-4617: CONTROL GP-PILOT OPERATED HYD
9C-4617 CONTROL GP-PILOT OPERATED HYD
S/N 63X9120-UP
3 VALVE
PART OF 4E-0741 HYDRAULIC AR, 4E-0742 HYDRAULIC AR-3 VALVE, 4E-0739 LOADER AR-LOG
Type 1
S/N 63X9120-UP
3 VALVE
PART OF 4E-0741 HYDRAULIC AR, 4E-0742 HYDRAULIC AR-3 VALVE, 4E-0739 LOADER AR-LOG
Type 1
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 4V-4353 | [1] | PLATE-INSTRUCTION | |
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 4. | 9C-4555 | [1] | SPRING (INNER) | |
| 5. | 9C-4554 | [1] | SPRING (OUTER) | |
| 6. | 5V-8780 | [1] | KNOB | |
| 8R-5003 | [1] | ROD (HYD CONTROL) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 7. | 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | |
| 8R-6701 | [1] | BOSS | ||
| 2V-7859 | [1] | BEARING | ||
| 8. | 9C-2640 | [1] | ROD (TILT) | |
| 9. | 9S-5585 | [3] | NUT-FULL (1/2-20-THD) | |
| 10. | 7M-0706 | [3] | KNOB | |
| 5B-9079 | [3] | NUT-JAM (3/8-24-THD) | ||
| 11. | 9C-2639 | [1] | ROD (LIFT) | |
| 12. | 9C-2640 | [1] | ROD (MULTIPURPOSE) | |
| 13. | 9C-4559 | [1] | SUPPORT AS | |
| 14. | 9C-4553 | [1] | GATE | |
| 15. | 9C-4552 | [1] | SHAFT AS | |
| 5H-9809 | [1] | PIN | ||
| 16. | 6W-9580 | [1] | PANEL | |
| 17. | 9T-6062 Y | [1] | VALVE GP-PILOT | |
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 19. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 20. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 21. | 9C-4556 | [1] | BRACKET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330696
9C-4617: CONTROL GP-PILOT OPERATED HYD
9C-4617 CONTROL GP-PILOT OPERATED HYD
S/N 63X9120-UP
3 VALVE
PART OF 4E-0741 HYDRAULIC AR, 4E-0742 HYDRAULIC AR-3 VALVE, 4E-0739 LOADER AR-LOG
Type 2
S/N 63X9120-UP
3 VALVE
PART OF 4E-0741 HYDRAULIC AR, 4E-0742 HYDRAULIC AR-3 VALVE, 4E-0739 LOADER AR-LOG
Type 2
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 4V-4353 | [1] | PLATE-INSTRUCTION | |
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 4. | 9C-4555 | [1] | SPRING (INNER) | |
| 5. | 9C-4554 | [1] | SPRING (OUTER) | |
| 6. | 5V-8780 | [1] | KNOB | |
| 8R-5003 | [1] | ROD (HYD CONTROL) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 7. | 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | |
| 8R-6701 | [1] | BOSS | ||
| 2V-7859 | [1] | BEARING | ||
| 8. | 9C-2640 | [1] | ROD (TILT) | |
| 9. | 9S-5585 | [3] | NUT-FULL (1/2-20-THD) | |
| 10. | 7M-0706 | [3] | KNOB | |
| 5B-9079 | [3] | NUT-JAM (3/8-24-THD) | ||
| 11. | 9C-2639 | [1] | ROD (LIFT) | |
| 12. | 9C-2640 | [1] | ROD (MULTIPURPOSE) | |
| 13. | 9C-4559 | [1] | SUPPORT AS | |
| 14. | 9C-4553 | [1] | GATE | |
| 15. | 9C-4552 | [1] | SHAFT AS | |
| 5H-9809 | [1] | PIN | ||
| 16. | 6W-9580 | [1] | PANEL | |
| 17. | 6E-3135 CY | [1] | VALVE GP-PILOT | |
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 19. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 20. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 21. | 9C-4556 | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330697
9C-4617: CONTROL GP-PILOT OPERATED HYD
9C-4617 CONTROL GP-PILOT OPERATED HYD
S/N 63X9120-UP
3 VALVE
PART OF 4E-0741 HYDRAULIC AR, 4E-0742 HYDRAULIC AR-3 VALVE, 4E-0739 LOADER AR-LOG
Type 3
S/N 63X9120-UP
3 VALVE
PART OF 4E-0741 HYDRAULIC AR, 4E-0742 HYDRAULIC AR-3 VALVE, 4E-0739 LOADER AR-LOG
Type 3
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 4V-4353 | [1] | PLATE-INSTRUCTION | |
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 4. | 9C-4555 | [1] | SPRING (INNER) | |
| 5. | 9C-4554 | [1] | SPRING (OUTER) | |
| 6. | 5V-8780 | [1] | KNOB | |
| 8R-5003 | [1] | ROD (HYD CONTROL) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 7. | 4B-9806 | [1] | SETSCREW-SOCKET (1/4-20X0.25-IN) | |
| 8R-6701 | [1] | BOSS | ||
| 2V-7859 | [1] | BEARING | ||
| 8. | 9C-2640 | [1] | ROD (TILT) | |
| 9. | 9S-5585 | [3] | NUT-FULL (1/2-20-THD) | |
| 10. | 7M-0706 | [3] | KNOB | |
| 5B-9079 | [3] | NUT-JAM (3/8-24-THD) | ||
| 11. | 9C-2639 | [1] | ROD (LIFT) | |
| 12. | 9C-2640 | [1] | ROD (MULTIPURPOSE) | |
| 13. | 9C-4559 | [1] | SUPPORT AS | |
| 14. | 9C-4553 | [1] | GATE | |
| 15. | 9C-4552 | [1] | SHAFT AS | |
| 5H-9809 | [1] | PIN | ||
| 16. | 6W-9580 | [1] | PANEL | |
| 17. | 6E-4021 CY | [1] | VALVE GP-PILOT | |
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 19. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 20. | 4V-1135 | [1] | CUSHION AS-BACKREST | |
| 21. | 9C-4556 | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330698
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 0S-1571 | [4] | BOLT (3/8-16X1.75-IN) | |
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 10. | 3G-7387 CY | [1] | PUMP GP-METERING (HMU) | |
| 11. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16330699
2V-4282: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 980C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-0530 | [1] | LEVER AS (TRANSMISSION) | |
| 2. | 1V-5326 | [2] | BEARING | |
| 3. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 4. | 5S-7046 | [1] | RING-RETAINING | |
| 5. | 1V-9809 | [1] | RETAINER | |
| 6. | 1V-6346 | [1] | COLLAR-INDICATOR | |
| 7. | 4V-2518 | [1] | SHAFT (16 TEETH) | |
| 8. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 9. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 10. | 5B-9324 | [1] | SETSCREW | |
| 11. | 9K-6605 | [1] | SPACER | |
| 12. | 3V-6905 | [1] | PIN | |
| 13. | 010-2571 | [6] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 14. | 1V-6342 | [1] | GEAR AS (12 TEETH) | |
| 1V-5326 | [1] | BEARING | ||
| 15. | 3V-6904 B | [5] | WASHER | |
| 16. | 4V-3693 | [1] | PIN | |
| 17. | 4V-3680 | [1] | BELLCRANK | |
| 18. | 2V-7894 | [1] | RACK | |
| 19. | 9L-2685 | [2] | BALL JOINT AS | |
| B | USE AS REQUIRED | |||
