225B LC 229 EXCAVATORS 1GF00001-UP (MACHINE) POWERED BY 3208 ENGINE HYDRAULIC SYSTEM Caterpillar SIS

EXCAVATOR 229 EXCAVATOR 1GF
225B LC 229 EXCAVATORS 1GF00001-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1638 229 1GF (1987)

Parts group 229:

For full view, you need register

HYDRAULIC SYSTEM

ACTUATOR GP

9T-1749 ACTUATOR GP

9T1749 ACTUATOR GP
PART OF 6W8713, 9C4530, 9C7147, 9C7148 CONTROLS-INCREASED PRESSURE
AN ATTACHMENT

COOLER GP

1W-4504 COOLER GP-HYDRAULIC OIL

1W4504 COOLER GP-HYDRAULIC OIL

COUPLING GP

6W-3988 COUPLING GP-PUMP

6W3988 COUPLING GP-PUMP
PART OF 6W6597 PUMP & MOUNTING

CYLINDER GP

3G-2996 CYLINDER GP-BOOM

3G2996 CYLINDER GP-BOOM-(CHANGE 1)-2 REQUIRED
139.7 MM (5.5") BORE X 1079.4 MM (42.5") STROKE. TYPE 1
PART OF 4V5831, 3V5261 BOOM ARS
AN ATTACHMENT

3G-2996 CYLINDER GP-BOOM

3G2996 CYLINDER GP-BOOM-(CHANGE 2)-2 REQUIRED
140 MM (5.5") BORE X 1079 MM (42.5") STROKE. TYPE 2
PART OF 4V5831, 3V5261 BOOM ARS
AN ATTACHMENT

9T-5230 CYLINDER GP-BOOM

9T5230 CYLINDER GP-BOOM-(CHANGES 00 - 03)-2 REQUIRED
152 MM (6") BORE X 1080 MM (43") STROKE
PART OF 9C3180 BOOM AR
AN ATTACHMENT

9J-1755 CYLINDER GP-STICK

9J1755 CYLINDER GP-STICK-(CHANGE 06)
152.4 MM (6") BORE X 1422.4 MM (56") STROKE.TYPE 1
PART OF 3V5261, 4V5830 BOOMS
AN ATTACHMENT

9J-1755 CYLINDER GP-STICK

9J1755 CYLINDER GP-STICK (CHANGE 08)
152.4 MM (6") BORE X 1422.4 MM (56") STROKE. TYPE 2
PART OF 3V5261, 4V5830, 9C3180, 9C3191 BOOMS
AN ATTACHMENT

9J-7006 CYLINDER GP-BUCKET

9J7006 CYLINDER GP-HOE BUCKET
139.7 MM (5.5") BORE X 1087.1 MM (42.8") STROKE
PART OF 3V4838, 9C6310 LINKAGE ARS
AN ATTACHMENT

DRIVE GP

6W-2738 DRIVE GP-SWING

6W2738 DRIVE GP-SWING-PART 1 OF 2
S/N 2ZD1-1320, 1GF1-522

6W-2738 DRIVE GP-SWING

6W2738 DRIVE GP-SWING-PART 2 OF 2
S/N 2ZD1-1320, 1GF1-522
3K5801-PAGE 94

6W-2738 DRIVE GP-SWING

6W2738 DRIVE GP-SWING-PART 1 OF 2
S/N 2ZD1321-UP, 1GF523-UP

6W-2738 DRIVE GP-SWING

6W2738 DRIVE GP-SWING-PART 2 OF 2
S/N 2ZD131-UP, 1GF523-UP
9C5969-PAGE 95

FILTER GP

8J-7390 FILTER GP

8J7390 FILTER GP
PART OF 6W4628 LINES-HYDRAULIC PUMP

9J-3952 FILTER GP-EXTERNAL

9J3952 FILTER GP-EXTERNAL
9J3954-PAGE 273.06
PART OF 3V8859 LINES-RETURN & FILTER

9J-1212 FILTER GP-OIL

9J1212 FILTER GP-OIL
PART OF 6W4628 HYDRAULIC PUMP LINES

9J-3954 BYPASS GP-FILTER

9J3954 BY-PASS GP-FILTER
PART OF 9J3952 FILTER-EXTERNAL

LINES GP-AUXILIARY

7V-5907 CONTROL & LINES AR-BOOM

7V5907 CONTROL & LINES AR
TWO PIECE BOOM ROTATOR
FOR USE WITH 6.5, 8 OR 10 FOOT STICK LINES
AN ATTACHMENT

7V-5908 CONTROL & LINES AR-BOOM

7V5908 LINES & CONTROL AR
ONE PIECE BOOM
FOR USE WITH CLAMSHELL & 6.5, 8 OR 10 FOOT STICK LINES
AN ATTACHMENT

LINES GP-BOOM

8R-0375 LINES AR-BOOM CHECK VALVE

8R0375 LINES AR-BOOM CHECK VALVE
LOWERING
FOR USE WITH 1 OR 2 PIECE HOE BOOM AR
AN ATTACHMENT

8V-9158 LINES AR-BOOM CHECK VALVE

8V9158 LINES AR-BOOM CHECK VALVE
REPLACED BY 8R0375-PAGE 141
LOWERING-FOR USE WITH BOOM AR. FACTORY INSTALLATION
AN ATTACHMENT

8V-6746 LINES GP-BOOM

8V6746 LINES GP-BOOM
TYPE 1. 9T0126-PAGE 206
PART OF 8V9158, 8R0375 LINES-BOOM CHECK VALVE
AN ATTACHMENT

8V-6746 LINES GP-BOOM

8V6746 LINES GP-BOOM
TYPE 2
9T2348-PAGE 207
PART OF 8V9158, 8R0375 LINES-BOOM
AN ATTACHMENT

8R-0376 LINES GP-BOOM CHECK VALVE

8R0376 LINES GP-BOOM CHECK VALVE-PART 1 OF 2
BASE VEHICLE
1U4723-PAGE-208
PART OF 8R0375 LINES AR-BOOM CHECK VALVE. AN ATTACHMENT

8R-0376 LINES GP-BOOM CHECK VALVE

8R0376 LINES GP-BOOM CHECK VALVE-PART 2 OF 2
BASE VEHICLE
9T5584-PAGE 214
PART OF 8R0375 LINES AR-BOOM CHECK VALVE. AN ATTACHMENT

3V-5263 LINES GP-BOOM

3V5263 LINES GP-BOOM-ONE PIECE
PART OF 3V5261, 9C3180 BOOM ARS
AN ATTACHMENT

8K-2641 LINES GP-BOOM

8K2641 LINES GP-FORE BOOM
TWO PIECE BOOM
PART OF 4V5830, 9C3191 BOOM ARS
AN ATTACHMENT

LINES GP-BUCKET

7V-5941 LINES GP-CLAMSHELL

7V5941 LINES GP-CLAMSHELL-PART 1 OF 2
ROTATOR-3 M (10 FOOT) STICK
AN ATTACHMENT

7V-5941 LINES GP-CLAMSHELL

7V5941 LINES GP-CLAMSHELL-PART 2 OF 2
ROTATOR-3 M (10 FOOT) STICK
AN ATTACHMENT

7V-5942 LINES GP-CLAMSHELL

7V5942 LINES GP-CLAMSHELL-PART 1 OF 2
ROTATOR-2.4 M (8 FOOT) STICK
AN ATTACHMENT

7V-5942 LINES GP-CLAMSHELL

7V5942 LINES GP-CLAMSHELL-PART 2 OF 2
ROTATOR-2.4 M (8 FOOT) STICK
AN ATTACHMENT

7V-5943 LINES GP-CLAMSHELL

7V5943 LINES GP-CLAMSHELL-PART 1 OF 2
1.8 M (6.5 FT) STICK
FOR USE WITH CLAMSHELL AND ONE OR TWO PIECE BOOM
AN ATTACHMENT

7V-5943 LINES GP-CLAMSHELL

7V5943 LINES GP-CLAMSHELL-PART 2 OF 2
1.8 M (6.5 FT) STICK
FOR USE WITH CLAMSHELL AND ONE OR TWO PIECE BOOM
AN ATTACHMENT

LINES GP-CYLINDER

3V-9384 LINES GP-BOOM CYLINDER

3V9384 LINES GP-BOOM CYLINDER-ONE PIECE
TYPE 1
PART OF 3V5261, 4V5831 BOOMS
AN ATTACHMENT

3V-9384 LINES GP-BOOM CYLINDER

3V9384 LINES GP-BOOM CYLINDER-ONE PIECE
REPLACED BY 9C7220-PAGE 171.01. TYPE 2
PART OF 3V5261, 4V5831, 9C3180 BOOM ARS
AN ATTACHMENT

9C-7220 LINES GP-BOOM CYLINDER

9C7220 LINES GP-BOOM CYLINDER
PART OF 4V5831 BOOM AR
AN ATTACHMENT

LINES GP-FRONT

3V-1868 LINES GP-FRONT

3V1868 LINES GP-FRONT HYDRAULIC-PART 1 OF 2
4T2637-PAGE 210

3V-1868 LINES GP-FRONT

3V1868 LINES GP-FRONT HYDRAULIC-PART 2 OF 2

LINES GP-HYDRAULIC

3V-3405 GUARD GP-LINES

3V3405 GUARD GP-PILOT LINES
AN ATTACHMENT

8V-7745 LINES GP-CHECK VALVE

8V7745 LINES GP-CHECK VALVE-PART 1 OF 2
BASE VEHICLE. REPLACED BY 8R0376-PAGE 145.01
1U4723-PAGE 208
PART OF 8V9158 LINES-BOOM CHECK VALVE
AN ATTACHMENT

8V-7745 LINES GP-CHECK VALVE

8V7745 LINES GP-CHECK VALVE-PART 2 OF 2
BASE VEHICLE. REPLACED BY 8R0376-PAGE 145.01
PART OF 8V9158 LINES-BOOM CHECK VALVE
AN ATTACHMENT

6W-8679 LINES GP-CHECK VALVE

6W8679 LINES GP-CHECK VALVE-PART 1 OF 2
BOOM LOWERING
AN ATTACHMENT

6W-8679 LINES GP-CHECK VALVE

6W8679 LINES GP-CHECK VALVE-PART 2 OF 2
BOOM LOWERING
AN ATTACHMENT

6W-8680 LINES GP-CHECK VALVE

6W8680 LINES GP-CHECK VALVE-PART 1 OF 2
STICK LOWERING
AN ATTACHMENT

6W-8680 LINES GP-CHECK VALVE

6W8680 LINES GP-CHECK VALVE-PART 2 OF 2
STICK LOWERING
AN ATTACHMENT

LINES GP-PILOT

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 1 OF 3
S/N 1GF1-351
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 2 OF 3
S/N 1GF1-351
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 3 OF 3
S/N 1GF1-351
8J2602-PAGE 216, 4T9980-PAGE 216.04
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 1 OF 3
S/N 1GF352-543
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 2 OF 3
S/N 1GF352-543
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 3 OF 3
S/N & 1GF352-543
8J2602-PAGE 216, 4T9980-PAGE 217
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 1 OF 3
S/N 1GF544-UP
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 2 OF 3
S/N 1GF544-UP
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 3 OF 3
S/N 1GF544-UP
8J2602-PAGE 216, 4T9980-PAGE 217
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 1 OF 3
S/N 2ZD1-UP
PART OF 9C3435, 9C3436 SPECIAL ARS

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 2 OF 3
S/N 2ZD1-UP
PART OF 9C3435, 9C3436 SPECIAL ARS

9C-3441 LINES GP-PILOT

9C3441 LINES GP-PILOT-PART 3 OF 3
S/N 2ZD1-UP
8J2602-PAGE 216, 4T9980-PAGE 217
PART OF 9C3435, 9C3436 SPECIAL ARS

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 1 OF 3
S/N 2ZD1-520
8J2602-PAGE 216

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 2 OF 3
S/N 2ZD1-520

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 3 OF 3
S/N 2ZD1-520
4T9980-PAGE 216.04

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 1 OF 3
S/N 2ZD521-1443
8J2602-PAGE 216

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 2 OF 3
S/N 2ZD521-1443

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 3 OF 3
S/N 2ZD521-1443
4T9980-PAGE 217

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 1 OF 3
S/N 2ZD1444-UP
8J2602-PAGE 216

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 2 OF 3
S/N 2ZD1444-UP

3V-5332 LINES GP-PILOT

3V5332 LINES GP-PILOT-PART 3 OF 3
S/N 2ZD1444-UP
4T9980-PAGE 217

LINES GP-PUMP

6W-6324 SERVICE GP-AUX PUMP LINES

6W6324 SERVICE GP-AUXILIARY PUMP LINE
FIELD INSTALLATION

6W-6325 SERVICE GP-AUX PUMP LINES

6W6325 SERVICE GP-AUXILIARY PUMP LINES
FIELD INSTALLATION

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 1 OF 4
S/N 2ZD1-549, 1GF1-355
8J7390-PAGE 272

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 2 OF 4
S/N 2ZD1-549, 1GF1-355

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 3 OF 4
S/N 2ZD1-549, 1GF1-355
8J2057-PAGE 215, 9J1212-PAGE 273.01

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 4 OF 4
S/N 2ZD1-549, 1GF1-355
9T2317-PAGE 216

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 1 OF 3
S/N 2ZD550-1656, 1GF356-577
8J7390-PAGE 272

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 2 OF 3
S/N 2ZD550-1656, 1GF356-577
8J2057-PAGE 215, 9J1212-PAGE 273.01

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 3 OF 3
S/N 2ZD550-1656, 1GF356-577
9T6118-PAGE 216.01

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 1 OF 3
S/N 2ZD1657-UP, 1GF578-UP
8J7390-PAGE 272

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 2 OF 3
S/N 2ZD1657-UP, 1GF579-UP
8J2057-PAGE 215, 9J1212-PAGE 273.01

6W-4628 LINES GP-PUMP

6W4628 LINES GP-HYDRAULIC PUMP-PART 3 OF 3
S/N 2ZD1657-UP, 1GF578-UP
9T6118-PAGE 216.01

6W-6000 PUMP & LINES GP

6W6000 PUMP GP-AUXILIARY LINES
9J7904-PAGE 262
AN ATTACHMENT

LINES GP-RETURN

3V-8859 LINES GP-RETURN & FILTER

3V8859 LINES GP-RETURN & FILTER-PART 1 OF 2
S/N 2ZD1-375, 1GF1-318

3V-8859 LINES GP-RETURN & FILTER

3V8859 LINES GP-RETURN & FILTER-PART 2 OF 2
S/N 2ZD1-375, 1GF1-318
9J2084-PAGE 216.04, 9J2041-PAGE 217, 9J3952-PAGE 273

3V-8859 LINES GP-RETURN & FILTER

3V8859 LINES GP-RETURN & FILTER-PART 1 OF 2
S/N 2ZD376-UP, 1GF319-UP

3V-8859 LINES GP-RETURN & FILTER

3V8859 LINES GP-RETURN & FILTER-PART 2 OF 2
S/N 2ZD376-UP, 1GF319-UP
9J2084-PAGE 217, 9J2041-PAGE 218, 9J3952-PAGE 273

LINES GP-ROTATOR

7V-5909 LINES GP-ROTATOR

7V5909 LINES GP-ROTATOR
9J8573-PAGE 219
PART OF 7V5907, 7V5908 CONTROL & LINES
AN ATTACHMENT

2V-3171 LINES GP-ROTATOR

2V3171 LINES GP-ROTATOR
TWO PIECE BOOM
PART OF 7V5907 CONTROL & LINES
CONVEYS FLUID FROM IN-HOUSE ROTATOR LINES TO THE STICK
ROTATOR LINES. AN ATTACHMENT

3V-9120 LINES GP-ROTATOR

3V9120 LINES GP-ROTATOR
ONE PIECE BOOM
PART OF 7V5908 LINES & CONTROL
AN ATTACHMENT

LINES GP-STICK

2V-8358 LINES GP-STICK

2V8358 LINES GP-STICK
PART OF 4V9192, 9C3150 STICK-HOE
AN ATTACHMENT

2V-8359 LINES GP-STICK

2V8359 LINES GP-STICK
PART OF 4V5507, 9C3160 STICK ARS
AN ATTACHMENT

2V-8360 LINES GP-STICK

2V8360 LINES GP-STICK
PART OF 4V5508, 9C3170 STICK ARS
AN ATTACHMENT

LINES GP-SWING

6W-2739 LINES GP-SWING MOTOR

6W2739 LINES GP-SWING MOTOR
9J8732-PAGE 217, 7T9746-PAGE 235, 9T0999-PAGE 262

LINES GP-TRAVEL MOTOR

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 1 OF 3
S/N 1GF1-361

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 2 OF 3
S/N 1GF1-361
8J2601-PAGE 218

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 3 OF 3
S/N 1GF1-361
9J3567-PAGE 268

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 1 OF 3
S/N 1GF362-600

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 2 OF 3
S/N 1GF362-600
8J2601-PAGE 219

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 3 OF 3
S/N 1GF362-600
9T5717-PAGE 268.01

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 1 OF 3
S/N 1GF601-UP

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 2 OF 3
S/N 1GF601-UP
8J2601-PAGE 219

6W-7441 LINES GP-TRACK MOTOR

6W7441 LINES GP-TRACK MOTOR-PART 3 OF 3
S/N 1GF601-UP
9T9397-PAGE 268.02

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 2ZD1-566
8J2601-PAGE 218

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 2ZD1-566
9J3567-PAGE 268

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 2ZD567-590
8J2601-PAGE 219

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 2ZD567-590
9J3567-PAGE 268

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 2ZD591-1828
8J2601-PAGE 219

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 2ZD591-1828
9T5717-PAGE 268.01

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 2ZD1829-UP
8J2601-PAGE 219

9C-2803 LINES GP-TRACK MOTOR

9C2803 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 2ZD1829-UP
9T9397-PAGE 268.02

6W-1988 LINES GP-TRACK MOTOR

6W1988 LINES GP-TRACK MOTOR-PART 1 OF 3
S/N 2ZD1-549
9J3567-PAGE 268
PART OF 9C2894 FRAME-UNDERCARRIAGE. AN ATTACHMENT

6W-1988 LINES GP-TRACK MOTOR

6W1988 LINES GP-TRACK MOTOR-PART 2 OF 3
S/N 2ZD1-549
PART OF 9C2894 FRAME-UNDERCARRIAGE
AN ATTACHMENT

6W-1988 LINES GP-TRACK MOTOR

6W1988 LINES GP-TRACK MOTOR-PART 3 OF 3
S/N 2ZD1-549
8J2601-PAGE 218
PART OF 9C2894 FRAME-UNDERCARRIAGE. AN ATTACHMENT

6W-1988 LINES GP-TRACK MOTOR

6W1988 LINES GP-TRACK MOTOR-PART 1 OF 3
S/N 2ZD1-UP
9T5717-PAGE 268.01
PART OF 9C2894, 9C3988 FRAME ARS
AN ATTACHMENT

6W-1988 LINES GP-TRACK MOTOR

6W1988 LINES GP-TRACK MOTOR-PART 2 OF 3
S/N 2ZD1-UP
PART OF 9C2894, 9C3988 FRAME ARS
AN ATTACHMENT

6W-1988 LINES GP-TRACK MOTOR

6W1988 LINES GP-TRACK MOTOR-PART 3 OF 3
S/N 2ZD1-UP
8J2601-PAGE 219
PART OF 9C2894, 9C3988 FRAME ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 1 OF 3
TYPE 1-S/N 2ZD1-UP
PART OF 9C3435, 9C3436 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 2 OF 3
TYPE 1-S/N 2ZD1-UP
8J2601-PAGE 218
PART OF 9C3435, 9C3436 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 3 OF 3
TYPE 1-S/N 2ZD1-UP
9J3567-PAGE 268
PART OF 9C3435, 9C3436 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 1 OF 3
TYPE 2-S/N 2ZD1-UP
PART OF 9C3435, 9C3436 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 2 OF 3
TYPE 2-S/N 2ZD1-UP
8J2601-PAGE 219
PART OF 9C3435, 9C3436 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 3 OF 3
TYPE 2-S/N 2ZD1-UP
9T5717-PAGE 268.01
PART OF 9C3435, 9C3436 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 1 OF 3
TYPE 3
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 2 OF 3
TYPE 3
8J2601-PAGE 219
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 3 OF 3
TYPE 3
9T5717-PAGE 268.01
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 1 OF 3
TYPE 4
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 2 OF 3
TYPE 4
8J2601-PAGE 219
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

9C-3245 LINES GP-TRACK MOTOR

9C3245 LINES GP-TRACK MOTOR-PART 3 OF 3
TYPE 4
9T9397-PAGE 268.02
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

MISCELLANEOUS INFORMATION

8R-0314 SERVICE GP

8R0314 SERVICE GP
BOOM CHECK VALVE LINES-LOWERING
9T5584-PAGE 214
FIELD INSTALLATION

9T-4222 SHAFT GP-STUB

9T4222 SHAFT GP-STUB
PART OF 9T3870 ROTATING

MOTOR GP

9C-2616 GUARD GP-TRACK MOTOR

9C2616 GUARD GP-TRACK MOTOR
S/N 1GF1-429

9C-2616 GUARD GP-TRACK MOTOR

9C2616 GUARD GP-TRACK MOTOR
S/N 1GF430-UP

8K-4683 GUARD GP-TRACK MOTOR

8K4683 GUARD GP-TRACK MOTOR
S/N 2ZD1-UP

8K-0173 GUARD GP-TRACK MOTOR

8K0173 GUARD GP-TRACK MOTOR
S/N 2ZD1-UP
PART OF 3V9410, 9C3140, 9C3988 FRAME ARS
AN ATTACHMENT

9C-0502 FASTENER GP

9C0502 FASTENER GP-TRACK MOTOR
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

9T-4221 SHAFT GP

9T4221 SHAFT GP
PART OF 9T3714 ROTATING

9T-0999 MOTOR GP-PISTON

9T0999 MOTOR GP-PISTON LINK
S/N 2ZD1-UP. 9T2280-PAGE 265
PART OF 6W2739 LINES-SWING MOTOR. NOTE: 2 REQUIRED FOR PROPELLING
TRACK, 1 REQUIRED FOR ACTUATING SWING-S/N 2ZD1-UP

9T-1208 MOTOR GP-PISTON

9T1208 MOTOR GP-PISTON LINK
TYPE 1. S/N 1GF1-UP
9T4328-PAGE 264
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

9T-1208 MOTOR GP-PISTON

9T1208 MOTOR GP-PISTON-LINK
TYPE 2. S/N 1GF1-UP
6E0458-PAGE 263.02

9T-2282 SHAFT GP

9T2282 SHAFT GP
PART OF 9T2280 ROTATING

9J-5448 MOTOR GP-GEROTOR

9J5448 MOTOR GP-GEROTOR
PART OF 9J5435 ROTATOR-CLAMSHELL
AN ATTACHMENT

PLATE GP-HYDRAULIC BLOCKING

8K-4707 PLATE GP-HYDRAULIC BLOCKING

8K4707 PLATE GP-HYDRAULIC BLOCKING
SUCTION
S/N 2ZD1-1211, 1GF1-503

8K-3570 PLATE GP-HYDRAULIC BLOCKING

8K3570 PLATE GP-HYDRAULIC BLOCKING
S/N 2ZD1-1211, 1GF1-503

PUMP GP

9C-1988 PUMP & MOUNTING GP

9C1988 PUMP & MOUNTING GP
S/N 2ZD629-UP, 1GF381-UP
9T4705-PAGE 255

6W-6597 PUMP & MOUNTING GP

6W6597 PUMP & MOUNTING GP
9T5187-PAGE 249, 6W3988-PAGE 248

9C-3279 PUMP & MTG GP-GEAR

9C3279 PUMP GP-MOUNTING & GEAR
S/N 2ZD1-628, 1GF1-380
1U1986-PAGE 255

6W-3988 COUPLING GP-PUMP

6W3988 COUPLING GP-PUMP
PART OF 6W6597 PUMP & MOUNTING

9T-5187 PUMP GP-PISTON

9T5187 PUMP GP-PISTON
9T3704-PAGE 250, 9T3712-PAGE 251
PART OF 6W6597 PUMP & MOUNTING

9T-3704 HEAD GP-PUMP

9T3704 HEAD GP-PUMP
9T3767-PAGE 246
PART OF 9T5187 PUMP

9T-3712 PUMP GP-PISTON

9T3712 PUMP GP-DOUBLE PISTON
9T3714-PAGE 252, 9T3870-PAGE 253
PART OF 9T5187 PUMP

9T-3714 ROTATING GP-PUMP

9T3714 ROTATING GP
9T4221-PAGE 254
PART OF 9T3712 PUMP-DOUBLE PISTON

9T-3870 ROTATING GP-PUMP

9T3870 ROTATING GP
9T4222-PAGE 254
PART OF 9T3712 PUMP-DOUBLE PISTON

9T-4705 PUMP GP-GEAR

9T4705 PUMP GP-GEAR
S/N 2ZD629-UP, 1GF381-UP
PART OF 9C1988 PUMP & MOUNTING

1U-1986 PUMP GP-GEAR

1U1986 PUMP GP-GEAR
S/N 2ZD1-628, 1GF1-380
PART OF 9C3279 PUMP-MOUNTING & GEAR

3G-0302 PUMP GP-GEAR

3G0302 PUMP GP-GEAR
PART OF 4V9221, 6W6326, 9C8568 CONTROL-GRAPPLE,
1U1987 PUMP-GEAR
AN ATTACHMENT

3G-7385 PUMP GP-GEAR

3G7385 PUMP GP-GEAR
SWING/PILOT
PART OF 1U1986, 9T4705 PUMPS

9T-4704 PUMP GP-GEAR

9T4704 PUMP GP-GEAR
SWING/PILOT
S/N 2ZD629-UP, 1GF381-UP
PART OF 9T4705 PUMP-GEAR

3G-4466 PUMP GP-GEAR

3G4466 PUMP GP-GEAR
SWING/PILOT
S/N 2ZD1-628, 1GF1-380
PART OF 1U1986 PUMP

3G-2875 PUMP GP-GEAR

3G2875 PUMP GP-GEAR
TO PERMIT ADDITION OF HYDRAULIC CIRCUIT
AN ATTACHMENT

3G-7386 PUMP GP-GEAR

3G7386 PUMP GP-GEAR
AN ATTACHMENT

9J-7900 PUMP GP-GEAR

9J7900 PUMP GP-AUXILIARY GEAR
30 L/MIN (8GPM)-FIELD INSTALLATION

9J-7903 PUMP GP-GEAR

9J7903 PUMP GP-AUXILIARY GEAR
106 L/MIN (28 GPM)
PART OF 4V9221, 6W6326, 9C8568 CONTROL-GRAPPLE
AN ATTACHMENT

9T-1489 PUMP GP-GEAR

9T1489 PUMP GP-GEAR
FIELD INSTALLATION

1U-1987 PUMP GP-GEAR

1U1987 PUMP GP-GEAR
AN ATTACHMENT

9J-7902 PUMP GP-AUXILIARY GEAR

9J7902 PUMP GP-AUXILIARY GEAR
22 GPM. FOR USE WITH 1U1987-PAGE 260.01
FIELD INSTALLATION

9J-7901 PUMP GP-GEAR

9J7901 PUMP GP-AUXILIARY GEAR
15 GPM
FOR USE WITH 1U1987-PAGE 260.01
FIELD INSTALLATION

6W-6000 PUMP & LINES GP

6W6000 PUMP GP-AUXILIARY LINES
9J7904-PAGE 262
AN ATTACHMENT

9J-7904 PUMP GP-AUXILIARY GEAR

9J7904 PUMP GP-AUXILIARY GEAR
174 L/MIN (46 GPM)
PART OF 6W6000 PUMP-AUXILIARY LINES
AN ATTACHMENT

6E-0458 ROTATING GP

6E0458 ROTATING GP-MOTOR
S/N 1GF-UP
PART OF 9T1208 MOTOR-PISTON LINK

9T-4328 ROTATING GP

9T4328 ROTATING GP-MOTOR
PART OF 9T1208 MOTOR-PISTON

9T-2280 ROTATING GP

9T2280 ROTATING GP
9T2282-PAGE 267
PART OF 9T0999 MOTOR-PISTON

SUPPORT GP

9C-3437 SUPPORT GP-VALVE & FILTER

9C3437 SUPPORT GP-VALVE & FILTER
S/N 1GF1-UP
ALSO PART OF 9C3435, 9C3436 SPECIAL ARS-S/N 2ZD1-UP

3V-8874 SUPPORT GP-VALVE & FILTER

3V8874 SUPPORT GP-VALVE & FILTER
S/N 2ZD1-UP

SWIVEL GP

8K-4123 GUARD GP-SWIVEL

8K4123 GUARD GP-SWIVEL
S/N 2ZD1-UP
AN ATTACHMENT

6W-6647 GUARD GP-SWIVEL

6W6647 GUARD GP-SWIVEL
AN ATTACHMENT

9J-3567 SWIVEL GP

9J3567 SWIVEL GP
PART OF 6W1988, 6W7441, 9C2803, 9C3245 LINES-TRACK MOTOR

9T-5717 SWIVEL GP

9T5717 SWIVEL GP
PART OF 6W1988, 9C2803, 9C3245, 6W7441 LINES-TRACK MOTOR

9T-9397 SWIVEL GP

9T9397 SWIVEL GP
PART OF 9C3245, 6W7441, 9C2803 LINES-TRACK MOTOR

TANK GP

9T-1950 TANK GP-HYDRAULIC

9T1950 TANK GP-HYDRAULIC

9J-2084 VALVE GP-DRAIN

9J2084 VALVE GP
PART OF 3V8859 LINES-RETURN & FILTER

9J-1212 FILTER GP-OIL

9J1212 FILTER GP-OIL
PART OF 6W4628 HYDRAULIC PUMP LINES

VALVE GP

8J-6311 VALVE GP

8J6311 VALVE GP-CHECK & RELIEF
8J0328-PAGE 211
PART OF 3V1868 LINES-FRONT HYDRAULIC

3G-3939 VALVE GP

3G3939 VALVE GP-3 STEM
S/N 1GF1-UP
3G3451, 3G3452-PAGE 213
PART OF 3G3940 VALVE-CONTROL

6E-0447 VALVE GP

6E0447 VALVE GP
PART OF 6E0446 VALVE-BANK

3G-7255 VALVE GP

3G7255 VALVE GP-2 BANK
3G7256-PAGE 220, 3G7258, 3G7259-PAGE 236, 3G8407-PAGE 238, 4T2672-PAGE 239
3G8408-PAGE 240. PART OF 4V9221, 6W6326, 9C8568 CONTROL-GRAPPLE
REPLACED BY 6E0446-PAGE 216.02. AN ATTACHMENT

9T-0133 VALVE GP

9T0133 VALVE GP
PART OF 9T0126, 9T0127, 9T2348 VALVES-CHECK
AN ATTACHMENT

9T-1094 VALVE GP

9T1094 VALVE GP-HYDRAULIC CONTROL RELIEF
S/N 2ZD1-520, 1GF1-351
9T0121, 9T0122-PAGE 244
PART OF 9T0162 VALVE-CONTROL

9T-1092 VALVE GP

9T1092 VALVE GP-HYDRAULIC CONTROL RELIEF
S/N 2ZD1-520, 1GF1-351
9T0121, 9T0122-PAGE 244
PART OF 3G3940 VALVE-CONTROL

9T-1745 VALVE GP

9T1745 VALVE GP
PART OF 9T2317, 9T6118 VALVES-COMBINATION

4T-2672 VALVE GP

4T2672 VALVE GP
PART OF 3G7255 VALVE
AN ATTACHMENT

9T-0121 VALVE GP

9T0121 VALVE GP-PILOT OPERATED-HYDRAULIC
PART OF 9T1092, 9T1094, 9T2291, 9T2287 VALVES

9T-2296 VALVE GP

9T2296 VALVE GP
S/N 2ZD521-UP
PART OF 9T2291 CONTROL VALVE

9T-2294 VALVE GP

9T2294 VALVE GP
S/N 2ZD521-UP, 1GF352-UP
PART OF 9T2287 VALVE

9T-3767 VALVE GP

9T3767 VALVE GP
PART OF 9T3704 HEAD-PUMP

VALVE GP-BRAKE

8J-2601 VALVE GP-BRAKE

8J2601 VALVE GP-TRACK BRAKE
PART OF 6W1988, 6W7441, 9C2803, 9C3245 LINES-TRACK MOTOR

VALVE GP-BREAKER RELIEF

9T-2843 VALVE GP-BREAKER RELIEF

9T2843 VALVE GP-BREAKER RELIEF
PART OF 6W6744 LINES-AIR COMPRESSOR

VALVE GP-CHECK

8V-7745 LINES GP-CHECK VALVE

8V7745 LINES GP-CHECK VALVE-PART 1 OF 2
BASE VEHICLE. REPLACED BY 8R0376-PAGE 145.01
1U4723-PAGE 208
PART OF 8V9158 LINES-BOOM CHECK VALVE
AN ATTACHMENT

8V-7745 LINES GP-CHECK VALVE

8V7745 LINES GP-CHECK VALVE-PART 2 OF 2
BASE VEHICLE. REPLACED BY 8R0376-PAGE 145.01
PART OF 8V9158 LINES-BOOM CHECK VALVE
AN ATTACHMENT

6W-8679 LINES GP-CHECK VALVE

6W8679 LINES GP-CHECK VALVE-PART 1 OF 2
BOOM LOWERING
AN ATTACHMENT

6W-8679 LINES GP-CHECK VALVE

6W8679 LINES GP-CHECK VALVE-PART 2 OF 2
BOOM LOWERING
AN ATTACHMENT

6W-8680 LINES GP-CHECK VALVE

6W8680 LINES GP-CHECK VALVE-PART 1 OF 2
STICK LOWERING
AN ATTACHMENT

6W-8680 LINES GP-CHECK VALVE

6W8680 LINES GP-CHECK VALVE-PART 2 OF 2
STICK LOWERING
AN ATTACHMENT

9T-0126 VALVE GP-CHECK

9T0126 VALVE GP-PILOT OPERATED CHECK
9T0133, 1U4596-PAGE 229
PART OF 8V6746 LINES-BOOM
AN ATTACHMENT

9T-2348 VALVE GP-CHECK

9T2348 VALVE GP-CHECK-PILOT OPERATED
9T0133-PAGE 229, 4T5572-PAGE 229.01
PART OF 8V6746 LINES-BOOM
AN ATTACHMENT

1U-4723 VALVE GP-CHECK

1U4723 VALVE GP-PILOT OPERATED CHECK
PART OF 8V7745, 8R0376 LINES-CHECK VALVE
AN ATTACHMENT

4D-0487 VALVE AS-CHECK

4D0487 VALVE AS-CHECK
PART OF 6W6744 LINES-AIR COMPRESSOR

9T-0127 VALVE GP-CHECK

9T0127 VALVE GP-PILOT OPERATED CHECK
9T0133-PAGE 229, 4T5178-PAGE 229.01
PART OF 8V6746 LINES-BOOM CHECK VALVE
AN ATTACHMENT

4T-2637 VALVE GP-CHECK

4T2637 VALVE GP-CHECK & RELIEF
1U4596-PAGE 229
PART OF 3V1868 LINES-FRONT HYDRAULIC,
6W8713, 9C4530 CONTROLS-INCREASED PRESSURE

VALVE GP-COMBINATION

9T-2317 VALVE GP-COMBINATION

9T2317 VALVE GP-COMBINATION
S/N 2ZD1-549, 1GF1-355
4T0955-PAGE 231, 9T1745-PAGE 233
PART OF 6W4628 LINES-HYDRAULIC PUMP

9T-6118 VALVE GP-COMBINATION

9T6118 VALVE GP-COMBINATION
S/N 2ZD550-UP, 1GF356-UP
9T6117-PAGE 232, 9T1745-PAGE 233
PART OF 6W4628 LINES-HYDRAULIC PUMP

VALVE GP-CONTROL

9T-3089 VALVE GP-CONTROL

9T3089 VALVE GP-CONTROL
FIELD INSTALLATION

9T-3088 VALVE GP-CONTROL

9T3088 VALVE GP-CONTROL
FIELD INSTALLATION

8J-6311 VALVE GP

8J6311 VALVE GP-CHECK & RELIEF
8J0328-PAGE 211
PART OF 3V1868 LINES-FRONT HYDRAULIC

3G-3939 VALVE GP

3G3939 VALVE GP-3 STEM
S/N 1GF1-UP
3G3451, 3G3452-PAGE 213
PART OF 3G3940 VALVE-CONTROL

6E-0446 VALVE GP-BANK

6E0446 VALVE GP-BANK
3G7256-PAGE 220, 3G7258,3G7259-PAGE 236, 3G8407-PAGE 238,
6E0447 PAGE 216.03, 3G8408-PAGE 240
PART OF 4V9221, 9C8568 CONTROLS-GRAPPLE

6E-0447 VALVE GP

6E0447 VALVE GP
PART OF 6E0446 VALVE-BANK

9J-8573 VALVE GP-CONTROL

9J8573 VALVE GP-CONTROL
9J8145-PAGE 235
PART OF 7V5909 LINES-ROTATOR
AN ATTACHMENT

3G-7255 VALVE GP

3G-3818 VALVE GP-CONTROL

3G3818 VALVE GP-PILOT & SPEED CONTROL
3G3816-PAGE 241, 3G3817-PAGE 242, 8J4356-PAGE 243
PART OF 8V8247 CONTROL-PILOT OPERATED HYDRAULIC

3G-7256 VALVE GP-CONTROL

3G7256 VALVE GP-CONTROL
PART OF 3G7255, 6E0446 VALVES
NOTE: 9T0269 SPOOL IS AVAILABLE
AN ATTACHMENT

9T-0162 VALVE GP-CONTROL

9T0162 VALVE GP-CONTROL-DIRECTIONAL FLOW
S/N 2ZD1-520, 1GF1-UP
9T1094-PAGE 229.02

9T-2291 VALVE GP-CONTROL

9T2291 VALVE GP-CONTROL-PART 1 OF 2
S/N 2ZD521-UP
9T0121, 9T0122-PAGE 244, 9T2296-PAGE 244.01

9T-2291 VALVE GP-CONTROL

9T2291 VALVE GP-CONTROL-PART 2 OF 2
S/N 2ZD521-UP

3G-3940 VALVE GP-CONTROL

3G3940 VALVE GP-CONTROL-3 STEM-PART 1 OF 2
S/N 2ZD1-520, 1GF1-351

3G-3940 VALVE GP-CONTROL

3G3940 VALVE GP-CONTROL-3 STEM-PART 2 OF 2
S/N 2ZD1-520, 1GF1-351
9T1092-PAGE 230

9T-2287 VALVE GP-CONTROL

9T2287 VALVE GP-CONTROL-PART 1 OF 2
S/N 2ZD521-UP, 1GF352-UP
9T0121, 9T0122-PAGE 244, 9T2294-PAGE 244.02

9T-2287 VALVE GP-CONTROL

9T2287 VALVE GP-CONTROL-PART 2 OF 2
S/N 2ZD521-UP, 1GF352-UP

9T-0133 VALVE GP

9T0133 VALVE GP
PART OF 9T0126, 9T0127, 9T2348 VALVES-CHECK
AN ATTACHMENT

9T-1094 VALVE GP

9T1094 VALVE GP-HYDRAULIC CONTROL RELIEF
S/N 2ZD1-520, 1GF1-351
9T0121, 9T0122-PAGE 244
PART OF 9T0162 VALVE-CONTROL

9T-1092 VALVE GP

9T1092 VALVE GP-HYDRAULIC CONTROL RELIEF
S/N 2ZD1-520, 1GF1-351
9T0121, 9T0122-PAGE 244
PART OF 3G3940 VALVE-CONTROL

9T-1745 VALVE GP

9T1745 VALVE GP
PART OF 9T2317, 9T6118 VALVES-COMBINATION

4T-2672 VALVE GP

4T2672 VALVE GP
PART OF 3G7255 VALVE
AN ATTACHMENT

3G-3816 VALVE GP-CONTROL

3G3816 VALVE GP-SPEED CONTROL
PART OF 3G3818 VALVE-PILOT & SPEED CONTROL

3G-3817 VALVE GP-CONTROL

3G3817 VALVE GP-SPEED CONTROL
PART OF 3G3818 VALVE-PILOT & SPEED CONTROL

9T-0121 VALVE GP

9T0121 VALVE GP-PILOT OPERATED-HYDRAULIC
PART OF 9T1092, 9T1094, 9T2291, 9T2287 VALVES

9T-2296 VALVE GP

9T2296 VALVE GP
S/N 2ZD521-UP
PART OF 9T2291 CONTROL VALVE

9T-2294 VALVE GP

9T2294 VALVE GP
S/N 2ZD521-UP, 1GF352-UP
PART OF 9T2287 VALVE

9T-3767 VALVE GP

9T3767 VALVE GP
PART OF 9T3704 HEAD-PUMP

VALVE GP-PILOT

4T-9980 VALVE GP-PILOT

4T9980 VALVE GP-PILOT
PART OF 3V5332, 9C3441 LINES-PILOT
6W8713, 9C4530 CONTROLS-INCREASED PRESSURE
AN ATTACHMENT

9T-2630 VALVE GP-PILOT

9T2630 VALVE GP-PILOT
PART OF 8V8247 CONTROL-PILOT OPERATED HYDRAULIC

9J-0387 VALVE GP-PILOT

9J0387 VALVE GP-PILOT
BOOM VENT
PART OF 6G8713 CONTROL-INCREASED PRESSURE
AN ATTACHMENT

8J-4356 VALVE GP-PILOT

8J4356 VALVE GP-DIRECTION
PART OF 3G3818 VALVE-PILOT & SPEED CONTROL

VALVE GP-RELIEF

8J-0328 VALVE GP-RELIEF

8J0328 VALVE GP-RELIEF
PART OF 8J6311 VALVE-CHECK & RELIEF

3G-3451 VALVE GP-RELIEF

3G3451 VALVE GP-PILOT OPERATED RELIEF
S/N 1GF1-UP
PART OF 3G3939 VALVE

3G-3452 VALVE GP-RELIEF

3G3452 VALVE GP-PILOT OPERATED RELIEF
S/N 1GF1-UP
PART OF 3G3939 VALVE

8J-2057 VALVE GP-RELIEF

8J2057 VALVE GP-RELIEF
PART OF 6W4628 LINES-HYDRAULIC PUMP

9J-8732 VALVE GP-RELIEF

9J8732 VALVE GP-RELIEF
3G9011-PAGE 234
PART OF 6W2739 LINES-SWING MOTOR

9J-2041 VALVE GP-RELIEF

9J2041 VALVE GP-RELIEF
PART OF 3V8859 LINES-RETURN & FILTER

1U-4596 VALVE GP-RELIEF

1U4596 VALVE GP-PILOT OPERATED RELIEF
PART OF 9T0126 VALVE-CHECK, 4T2637 VALVE-CHECK & RELIEF

4T-5178 VALVE GP-RELIEF

4T5178 VALVE GP-PILOT OPERATED RELIEF
PART OF 9T0127 VALVE-CHECK
AN ATTACHMENT

4T-5572 VALVE GP-RELIEF

4T5572 VALVE GP-RELIEF
PILOT OPERATED
PART OF 9T2348 LINES-BOOM
AN ATTACHMENT

4T-0955 VALVE GP-RELIEF

4T0955 VALVE GP-PILOT OPERATED RELIEF
S/N 2ZD1-549, 1GF1-355
PART OF 9T2317 VALVE-COMBINATION

9T-6117 VALVE GP-RELIEF

9T6117 VALVE GP-RELIEF-PILOT OPERATED
S/N 2ZD550-UP, 1GF356-UP
PART OF 9T6118 VALVE-COMBINATION

3G-9011 VALVE GP-RELIEF

3G9011 VALVE GP-RELIEF
TYPE 2
PART OF 9J8732 VALVE-RELIEF

3G-9011 VALVE GP-RELIEF

3G9011 VALVE GP-PILOT OPERATED RELIEF
TYPE 1
PART OF 9J8732 VALVE-RELIEF

3G-8407 VALVE GP-RELIEF

3G8407 VALVE GP-PILOT OPERATED RELIEF
PART OF 3G7255, 6E0466 VALVES
AN ATTACHMENT

4T-7593 VALVE GP-RELIEF

4T7593 VALVE GP-PILOT OPERATED RELIEF
PART OF 3G8408 VALVE-PILOT OPERATED RELIEF
AN ATTACHMENT

3G-8408 VALVE GP-RELIEF

3G8408 VALVE GP-PILOT OPERATED RELIEF
PART OF 3G7255, 6E0446 VALVES
AN ATTACHMENT

4T-7599 VALVE GP-RELIEF

4T7599 VALVE GP-PILOT OPERATED RELIEF
PART OF 3G8408 VALVE-PILOT OPERATED RELIEF
AN ATTACHMENT

9T-0122 VALVE GP-RELIEF

9T0122 VALVE GP-PILOT OPERATED RELIEF
PART OF 9T1092, 9T1094, 9T2291, 9T2287 VALVES

4T-7596 VALVE GP-RELIEF

4T7596 VALVE GP-PILOT OPERATED RELIEF
PART OF 3G8407 VALVE-PILOT OPERATED RELIEF
AN ATTACHMENT

4T-7595 VALVE GP-RELIEF

4T7595 VALVE GP-PILOT OPERATED RELIEF
PART OF 3G8407 VALVE-PILOT OPERATED RELIEF
AN ATTACHMENT

VALVE GP-SELECTOR

9T-5584 VALVE GP-SELECTOR

9T5584 VALVE GP-SELECTOR
PART OF 8R0376 LINES AR-BOOM CHECK VALVE,
8R0314 SERVICE-BOOM CHECK VALVE LINES

8J-2602 VALVE GP-SELECTOR

8J2602 VALVE GP-SELECTOR
S/N 2ZD1-UP
PART OF 3V5332, 9C3441 LINES-PILOT

9T-3672 VALVE GP-SELECTOR

9T3672 VALVE GP-SELECTOR
S/N 2ZD866-UP, 1GF447-UP
PART OF 8V8247 CONTROL

9J-5447 VALVE GP-SELECTOR

9J5447 VALVE GP-SELECTOR
S/N 2ZD1-865, 1GF1-446
PART OF 8V8247 COVTROL-PILOT OPERATED HYDRAULIC

VALVE GP-SOLENOID

6T-5859 VALVE GP-SOLENOID

6T5859 VALVE GP
24 VOLT
PART OF 6W8713, 9C4530, 9C7147, 9C7148 CONTROLS-INCREASED PRESSURE
AN ATTACHMENT

7T-9746 VALVE GP-SOLENOID

7T9746 VALVE GP-SOLENOID
24 VOLT
PART OF 6W2739 LINES-SWING MOTOR

9J-8145 VALVE GP-SOLENOID

9J8145 VALVE GP-SOLENOID
PART OF 9J8573 VALVE-CONTROL
AN ATTACHMENT

3G-7259 VALVE GP-SOLENOID

3G7259 VALVE GP-SOLENOID
PART OF 3G7255, 6E0446 VALVES
AN ATTACHMENT

3G-7258 VALVE GP-SOLENOID

3G7258 VALVE GP-SOLENOID
PART OF 3G7255, 6E0446 VALVES
AN ATTACHMENT

Information:

(For parts list, see above)

HYDRAULIC SYSTEM

ACCUMULATOR GP

Special Instruction

Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}

Technical Information Bulletin

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}

Tool Operating Manual

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

Service Magazine

Nitrogen Charging Group Available For Balderson Hydraulic Hammer Accumulators{6333,0647}
1992/05/04

The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}

ACTUATOR GP

Specifications

Pump Actuator (Attachment)
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

CONTROL GP-RIDE

Technical Information Bulletin

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}

COOLER GP

Special Instruction

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}

Disassembly and Assembly

Hydraulic Oil Cooler
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05

Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Improved Seals Used; Seal Replacement In Folded Core Radiators {1353}
1988/05/09

New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13

New Hydraulic Oil Coolers Used {1374}
1989/05/15

Engine Coolant Can Be Recycled{1395}
1989/11/13

Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19

Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27

COUNTERWEIGHT GP-HYDRAULIC

Installation Of Grease/Dust Seals For Swing Bearings{7063}
1993/02/01

COUPLING GP

Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21

Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Australia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CFEL

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CSARL

Service Letter-Americas

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder 3G2996, Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Boom Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Bucket Cylinder 9J7006 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Bucket Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Stick Cylinder 9J1755 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Stick Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Boom Cylinder 9T5230 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Asia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Bench Test Procedures

Disassembly and Assembly

Bucket Cylinder
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Stick Cylinder
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Bucket And Stick Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13

Bolt And Washer (Stop) Removed From Bucket Cylinder Group {5457}
1988/01/25

Hydraulic Cylinder End Bores Can Be Repaired {5456,5457,5458,5470}
1989/02/06

New Seal And Back-up Ring Used In Boom Cylinder Heads{5102,5456}
1989/07/10

New Boom-To-Stick Stop Arrangement{6501,6502}
1989/09/25

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10

New, Stronger Cylinder Piston Used In Boom And Bucket Cylinder Groups{5102,5456,5457}
1991/03/04

Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03

New Stop Available For Stick Cylinders{5458}
1993/08/16

Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

DRIVE GP

Specifications

Swing Drive 6W2738
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Drive Gear For The Injection Pump
3208 VEHICULAR ENGINE

Disassembly and Assembly

Engine, Radiator And Pump Drive
3304 VEHICULAR ENGINE FOR 215C & 219, 225B & 229, 225D, 229D

Swing Drive
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27

An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

FILTER GP

Special Instruction

Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}

Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}

Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}

Specifications

Case Drain Filter 9J1212
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Filter (Main Oil System) 9J3952
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Pilot System Filter 8J7390
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}

188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Disassembly and Assembly

Main System Oil Filter
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Pilot System Oil Filter
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Case Drain Filter
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23

Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17

Spacer May Be Needed In Hydraulic Filter Housing {5068}
1989/05/22

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23

Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07

New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}

KITS

Technical Information Bulletin

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

LINES GP

Special Instruction

New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Technical Information Bulletin

The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}

Tool Operating Manual

358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}

Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}

Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}

Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}

243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Reuse And Salvage Guidelines

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Contamination Control Guidelines

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Service Magazine

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19

Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21

Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28

Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

LINES GP-AUXILIARY

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

LINES GP-BOOM

Service Letter-NACD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Australia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CFEL

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CSARL

Service Letter-Americas

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-China

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Asia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-APD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Disassembly and Assembly

Boom Check And Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13

Hydraulic Cylinder End Bores Can Be Repaired {5456,5457,5458,5470}
1989/02/06

New Seal And Back-up Ring Used In Boom Cylinder Heads{5102,5456}
1989/07/10

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10

New, Stronger Cylinder Piston Used In Boom And Bucket Cylinder Groups{5102,5456,5457}
1991/03/04

Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03

LINES GP-BUCKET

Reuse And Salvage Guidelines

Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

LINES GP-COUPLER

Service Magazine

Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
2010/04/15

LINES GP-CYLINDER

Service Letter-NACD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Australia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CFEL

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CSARL

Service Letter-Americas

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-China

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Asia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Reuse And Salvage Guidelines

Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

Service Letter-APD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Disassembly and Assembly

Boom Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13

Hydraulic Cylinder End Bores Can Be Repaired {5456,5457,5458,5470}
1989/02/06

New Seal And Back-up Ring Used In Boom Cylinder Heads{5102,5456}
1989/07/10

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10

New, Stronger Cylinder Piston Used In Boom And Bucket Cylinder Groups{5102,5456,5457}
1991/03/04

Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03

LINES GP-HYDRAULIC

Special Instruction

Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}

New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}

Technical Information Bulletin

Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}

The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}

Tool Operating Manual

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}

Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}

Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}

Reuse And Salvage Guidelines

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Contamination Control Guidelines

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Service Magazine

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21

Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28

Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13

Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}

LINES GP-PILOT

Technical Information Bulletin

The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}

Service Magazine

New Service Parts Required For Pilot Valve Groups Controlling Lift And Tilt Functions{5059,5123,5125,5126,5136}
1996/07/29

LINES GP-PUMP

Technical Information Bulletin

The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}

Disassembly and Assembly

Pilot System Pump
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Installing Auxiliary Pumps On Excavators With Bent Axis Implement Pump {5057,5073}
1989/04/10

New O-ring Seal Used In Mounting And Pump Group For Swing And Pilot Gear Pump{5073}
1991/01/28

LINES GP-STICK

Service Letter-NACD

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Stick Cylinder
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Bucket And Stick Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13

Hydraulic Cylinder End Bores Can Be Repaired {5456,5457,5458,5470}
1989/02/06

New Boom-To-Stick Stop Arrangement{6501,6502}
1989/09/25

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10

Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03

New Stop Available For Stick Cylinders{5458}
1993/08/16

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

LINES GP-TRAVEL MOTOR

Specifications

Track Brake Valve 8J2601
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Track Brake 6W1445
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Track Brake 6W4584
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Track Brake Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Hoses May Be Substituted For Tube Assemblies In Track Motor Lines Group To Improve Service Life {3218}
1993/01/18

MISCELLANEOUS INFORMATION

Special Instruction

Use of 5C2578, 8K3570, 8K4707 and 4V9384 Blocking Plate Groups{5050}
Use of 5C2578, 8K3570, 8K4707 and 4V9384 Blocking Plate Groups{5050}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Service Letter-NACD

Fine Control Modulation Of Boom And Stick Can Result In Overcompensation in Certain Applications; 225B, 229, 235B Excavators
Fine Control Modulation Of Boom And Stick Can Result In Overcompensation in Certain Applications; 225B, 229, 235B Excavators

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Australia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CFEL

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CSARL

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Americas

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Technical Information Bulletin

Spring In 9T-0122 Line Relief Valve May Not Operate Correctly
Spring In 9T-0122 Line Relief Valve May Not Operate Correctly

Specifications

Track And Swing Motor
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Track Motor
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Bucket Cylinder 9J7006 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Bucket Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Stick Cylinder 9J1755 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Stick Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Boom Check And Relief Valve 4T2637
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Blocker Valve 8J2602
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Service Letter-China

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Asia

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-APD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Disassembly and Assembly

Engine, Radiator And Pump Drive
3304 VEHICULAR ENGINE FOR 215C & 219, 225B & 229, 225D, 229D

Oil Pump And Relief Valve
3208 VEHICULAR ENGINE FOR 225B & 229, 225D, 229D & 231D EXCA

Service Magazine

Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13

New Engine And Hydraulic Specifications For Upgraded Models{1250,5467}
1986/12/15

Change Location Of Gauge To Obtain Correct Stroking Pressure For Piston Pumps; New Tool Helps To Obtain More Accurate Pump Signal Pressures {0784,5070,5455}
1988/05/09

New Seal And Back-up Ring Used In Boom Cylinder Heads{5102,5456}
1989/07/10

New Boom-To-Stick Stop Arrangement{6501,6502}
1989/09/25

New Boom Lowering Check Valve Prevents Unexpected Boom Movement{5127}
1990/08/13

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10

New O-ring Seal Used In Mounting And Pump Group For Swing And Pilot Gear Pump{5073}
1991/01/28

Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03

Nitrogen Charging Group Available For Balderson Hydraulic Hammer Accumulators{6333,0647}
1992/05/04

Installation Of Grease/Dust Seals For Swing Bearings{7063}
1993/02/01

New Service Parts Available For 9T3712 Pump Groups{5070}
1993/08/16

New Stop Available For Stick Cylinders{5458}
1993/08/16

MOTOR GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Specifications

Track And Swing Motor
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Track Motor
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

Reuse And Salvage Guidelines

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Bench Test Procedures

Disassembly and Assembly

Swing Motor
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Track Motors
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Motors (Swing And Track)
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Hoses May Be Substituted For Tube Assemblies In Track Motor Lines Group To Improve Service Life {3218}
1993/01/18

Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26

High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24

Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27

MOUNTING GP

Service Letter-NACD

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

PUMP GP

Special Instruction

Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Specifications

Hydraulic Pump (Main System) 9T5187
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Hydraulic Pump 9T4732
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Hydraulic Pump (Pilot System) 3G7385, 9T4704
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Reuse And Salvage Guidelines

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Bench Test Procedures

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Disassembly and Assembly

Swivel Group
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Pilot System Pump
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Double Pump (Bent-Axis Piston)
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Oil Pump And Relief Valve
3208 VEHICULAR ENGINE FOR 225B & 229, 225D, 229D & 231D EXCA

Service Magazine

Use FT1612 Pump Tool To Adjust Servo Valve In Piston Type Hydraulic Pump{0654,5070}
1981/05/25

Swivel Has New Seals To Reduce Land Wear And Oil Leakage{5060}
1987/06/29

Change Location Of Gauge To Obtain Correct Stroking Pressure For Piston Pumps; New Tool Helps To Obtain More Accurate Pump Signal Pressures {0784,5070,5455}
1988/05/09

Installing Auxiliary Pumps On Excavators With Bent Axis Implement Pump {5057,5073}
1989/04/10

New O-ring Seal Used In Mounting And Pump Group For Swing And Pilot Gear Pump{5073}
1991/01/28

New Service Parts Available For 9T3712 Pump Groups{5070}
1993/08/16

Removal of Thread Lock When Servicing Implement Pumps{0649,5070}
1993/11/09

Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26

High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24

New Gear Pumps Have Improved Pressure Plates And Seals {5073}
1999/06/14

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}
New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}

PUMP GP-METERING

New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27

SWIVEL GP

Disassembly and Assembly

Swivel Group
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Swivel Has New Seals To Reduce Land Wear And Oil Leakage{5060}
1987/06/29

TANK GP

Technical Information Bulletin

HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST
HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST

Tool Operating Manual

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}

Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}

Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}

Reuse And Salvage Guidelines

Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}

Contamination Control Guidelines

Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}

Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}

Disassembly and Assembly

Hydraulic Tank
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Hydraulic Tank Cover
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Spacer May Be Needed In Hydraulic Filter Housing {5068}
1989/05/22

Improved Sight Gauges for the Hydraulic Tank and for the Fuel Tank Have Increased Durability {1273, 5056, 7479}
2003/12/08

Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29

A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

TOOLS

Truck Engine News

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01

Engine News

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10

Special Instruction

Use of 5C2578, 8K3570, 8K4707 and 4V9384 Blocking Plate Groups{5050}
Use of 5C2578, 8K3570, 8K4707 and 4V9384 Blocking Plate Groups{5050}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}

Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}

Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}

Technical Information Bulletin

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}

Tool Operating Manual

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}

Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}

Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}

Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}

146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}

TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}

Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}

Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}

420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}

HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}

4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}

Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}

Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

Reuse And Salvage Guidelines

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Contamination Control Guidelines

Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}

Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}

Bench Test Procedures

Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}

Service Magazine

Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Change Location Of Gauge To Obtain Correct Stroking Pressure For Piston Pumps; New Tool Helps To Obtain More Accurate Pump Signal Pressures {0784,5070,5455}
1988/05/09

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Balderson Hammer Hydraulic Circuit Test Instructions {6333,0784}
1992/04/06

New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03

Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29

Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01

Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12

Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13

Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

VALVE & LINES GP

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

VALVE GP

Specifications

Valve Rocker Arms And Cam Followers
3208 VEHICULAR ENGINE

Disassembly and Assembly

Three Stem Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Line Make-Up Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Make-Up Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

VALVE GP-BANK

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

VALVE GP-BLOCKER

Specifications

Blocker Valve 8J2602
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Blocker Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Boom Lowering Check Valve Prevents Unexpected Boom Movement{5127}
1990/08/13

Improved Modulation For Boom Down Or Stick Out{5127}
1993/09/06

VALVE GP-BRAKE

Specifications

Track Brake Valve 8J2601
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Track Brake 6W1445
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Track Brake 6W4584
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Track Brake Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

VALVE GP-CHECK

Specifications

Boom Check And Relief Valve 4T2637
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Load Check Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Check And Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Shutoff Housing, Check Valve And Bypass Valve
3208 VEHICULAR ENGINE FOR 225B & 229, 225D, 229D & 231D EXCA

Service Magazine

Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03

New Boom Lowering Check Valve Prevents Unexpected Boom Movement{5127}
1990/08/13

VALVE GP-CHECK & RELIEF

Specifications

Boom Check And Relief Valve 4T2637
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Line Make-Up Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Make-Up Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Load Check Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Line Relief Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Check And Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

VALVE GP-COMBINATION

Specifications

Combiner And Main Relief Valve 9T2317, 4T955 Relief Valve, 9T1745 Combiner Valve
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Combiner Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

VALVE GP-CONTROL

Specifications

Boom Vent Valve 4T9980
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Main Control Valve 3G3940
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Main Control Valve 9T162
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Speed Control And Steering Valve 3G3818, 8J4356 Direction Valve, 3G3817 Speed Valve (Reverse), 3G3816 Speed Valve (Forward)
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Boom Check And Relief Valve 4T2637
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Disassembly and Assembly

Three Stem Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Five Stem Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Line Make-Up Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Make-Up Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Check And Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Vent Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Stick And Swing Pilot Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Bucket And Boom Pilot Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Pilot Control Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Speed And Direction Pilot Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Main Control Valves Used {5051}
1987/06/15

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

New Boom Lowering Check Valve Prevents Unexpected Boom Movement{5127}
1990/08/13

New Spring Retainer Used In Main Hydraulic Control Valves{5051}
1994/09/26

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

VALVE GP-DRAIN

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

VALVE GP-FLUID SAMPLING

Truck Engine News

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

Engine News

Contamination Control Guidelines

Service Magazine

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

VALVE GP-MANUAL

The Work Tool Ball Valve Can Seize on Certain Wheeled and Medium Hydraulic Excavators {1329, 5001, 5130}
2011/11/29

VALVE GP-PILOT

Specifications

Pilot Valve
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Relief Valve (Pilot System) 8J2057
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Disassembly and Assembly

Pilot System Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Stick And Swing Pilot Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Bucket And Boom Pilot Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Pilot Control Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Speed And Direction Pilot Control Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Basic Valve Group (Cartridge) With A Backup Ring Used In Pilot Operated Swing Relief Valve Groups{5054}
1990/03/12

New Service Parts Required For Pilot Valve Groups Controlling Lift And Tilt Functions{5059,5123,5125,5126,5136}
1996/07/29

VALVE GP-PRESSURE REDUCING

New Engine And Hydraulic Specifications For Upgraded Models{1250,5467}
1986/12/15

VALVE GP-RELIEF

Technical Information Bulletin

Spring In 9T-0122 Line Relief Valve May Not Operate Correctly
Spring In 9T-0122 Line Relief Valve May Not Operate Correctly

Specifications

Combiner And Main Relief Valve 9T2317, 4T955 Relief Valve, 9T1745 Combiner Valve
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Line Relief Valve (Swing Circuit) 9J8732, 3G9011 Valve Group
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Oil Cooler Relief Valve
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}

Reuse And Salvage Guidelines

Disassembly and Assembly

Oil Cooler Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Main System Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Line Relief Valves
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Swing Relief Valve
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Hydraulic Adjustment Procedures And Main Relief Pressures{5066,5069,5454}
1988/06/20

New Basic Valve Group (Cartridge) With A Backup Ring Used In Pilot Operated Swing Relief Valve Groups{5054}
1990/03/12

The 229-3612 Valve Seat Tool Gp Is Available to Repair Line Relief Valve Seats {0738, 5117}
2010/03/01

VALVE GP-SEQUENCE

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

VALVE GP-SERVO

Use FT1612 Pump Tool To Adjust Servo Valve In Piston Type Hydraulic Pump{0654,5070}
1981/05/25

VALVE GP-SHUTTLE

New Service Parts Required For Pilot Valve Groups Controlling Lift And Tilt Functions{5059,5123,5125,5126,5136}
1996/07/29

VALVE GP-SOLENOID

A New Coil Assembly is Now Used {5479}
2009/02/09

VALVE GP-UNLOADING

New Main Control Valves Used {5051}
1987/06/15

New Basic Valve Group In Two Bank Valve Group Used In Grapple Control Group{5051}
1989/11/06

New Spring Retainer Used In Main Hydraulic Control Valves{5051}
1994/09/26

225B LC 229 EXCAVATORS 1GF00001-UP (MACHINE) POWERED BY 3208 ENGINE HYDRAULIC SYSTEM Caterpillar SIS

Parts group 229:

Information:

Truck sale: