9J7006 CYLINDER GP-HOE BUCKET 139.7 MM (5.5") BORE X 1087.1 MM (42.8") STROKE PART OF 3V4838, 9C6310 LINKAGE ARS AN ATTACHMENT 229

9J-7006: CYLINDER GP-BUCKET

9J7006 CYLINDER GP-HOE BUCKET
139.7 MM (5.5") BORE X 1087.1 MM (42.8") STROKE
PART OF 3V4838, 9C6310 LINKAGE ARS
AN ATTACHMENT

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8J-5919	[4]	SEAL AS
2.	8J-4411	[2]	BEARING AS
3.	5J-8325	[1]	SEAL-U-CUP
4.	6J-7167	[1]	SEAL-O-RING
5.	1A-8537	[6]	BOLT
6.	2J-7686	[1]	NUT-SELF LOCKING
7.	9J-7191	[1]	RING-WEAR
8.	4T-5173	[1]	SEAL
9.	3G-3261	[1]	PISTON
10.	5P-8247	[8]	WASHER-HARD
11.	3G-5911	[1]	STOP
12.	9J-7005 R	[1]	CYLINDER AS-HYD
13.	8J-1689	[1]	RING-BACK-UP
14.	8J-1688	[1]	SEAL-O-RING
15.	8J-8868	[1]	HEAD
			-OR-
	9T-0328	[1]	HEAD
	8T-0777	[1]	RING-WEAR
16.	1D-4586	[2]	BOLT
17.	2B-7408	[2]	PLUG-PIPE
18.	9J-7004 R	[1]	ROD-PISTON
19.	6J-4169	[1]	SEAL-LIP TYPE
	R		REMFG PART MAY BE AVAILABLE

8V-0495: CONTROL AR-GRAPPLE

CONTROL AR-GRAPPLE

8V0495 CONTROL AR-GRAPPLE
S/N 2ZD1-348, 1GF1-348
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name


4V-9221 Y	[1]	CONTROL GP-GRAPPLE-TANDEM CENTER

6W-6457	[1]	FRAME AS

3V-2793	[2]	EYE

4D-6267	[1]	BLOCK

4V-7412	[4]	BOSS

8D-0894	[2]	BLOCK

7V-0696	[1]	PLATE

7V-0697	[1]	PLATE

6W-6020	[1]	FRAME AS

3J-5169	[11]	NUT

4V-5691	[1]	PLATE AS

5D-2419	[2]	PLATE

1F-0748	[6]	NUT

8K-2807	[1]	BRACKET AS

5B-8855	[1]	PLATE

4D-6267	[1]	BLOCK

5V-0061	[2]	CLAMP

9K-3050	[1]	STUD

1P-6489	[1]	BOSS

4K-8479	[1]	STUD

6W-5997	[2]	BRACKET

8V-8304	[1]	DOOR AS

8V-6073	[1]	LATCH AS

8V-8116	[2]	HINGE

8K-0589	[1]	DOWEL
Y		SEPARATE ILLUSTRATION

8V-0495: CONTROL AR-GRAPPLE

CONTROL AR-GRAPPLE

8V0495 CONTROL AR-GRAPPLE
TYPE 1-S/N 2ZD349-UP, 1GF349-UP
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name


4V-9221 Y	[1]	CONTROL GP-GRAPPLE-TANDEM CENTER

9C-3399	[1]	FRAME AS

5V-5437	[2]	PLATE

4D-6267	[1]	BLOCK

4V-7412	[4]	BOSS

7V-0696	[1]	PLATE

7V-0697	[1]	PLATE

9C-3400	[1]	FRAME AS

3J-5169	[11]	NUT

4V-5691	[1]	PLATE AS

5D-2419	[2]	PLATE

1F-0748	[6]	NUT

5B-8855	[1]	PLATE

4D-6267	[1]	BLOCK

5V-0061	[2]	CLAMP

9K-3050	[1]	STUD

1P-6489	[1]	BOSS

4K-8479	[1]	STUD

6W-5997	[2]	BRACKET

8V-8304	[1]	DOOR AS

8V-6073	[1]	LATCH AS

8V-8116	[2]	HINGE
Y		SEPARATE ILLUSTRATION

8V-0495: CONTROL AR-GRAPPLE

CONTROL AR-GRAPPLE

8V0495 CONTROL AR-GRAPPLE
TYPE 2-S/N 2ZD349-UP, 1GF349-UP
PART OF 9C3435, 9C3436, 9C8510, 9C8511 SPECIAL ARS
AN ATTACHMENT

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name



4V-9221 Y	[1]	CONTROL GP-GRAPPLE-TANDEM CENTER

9C-3399	[1]	FRAME AS

5V-5437	[2]	PLATE

4D-6267	[1]	BLOCK

4V-7412	[4]	BOSS

7V-0696	[1]	PLATE

7V-0697	[1]	PLATE

9C-4567	[1]	FRAME AS

3J-5169	[11]	NUT

5D-2419	[2]	PLATE

1F-0748	[6]	NUT

5B-8855	[1]	PLATE

4D-6267	[1]	BLOCK

5V-0061	[2]	CLAMP

9K-3050	[1]	STUD

1P-6489	[1]	BOSS

4K-8479	[1]	STUD

6W-5997	[4]	BRACKET

8V-8304	[1]	DOOR AS

8V-8116	[2]	HINGE

9C-9887	[1]	LATCH
Y		SEPARATE ILLUSTRATION

8V-8247: CONTROL GP-PILOT OPERATED HYD

CONTROL GP-PILOT OPERATED HYD

8V8247 CONTROL GP-PILOT OPERATED HYDRAULIC-PART 1 OF 8
S/N 2ZD1-865, 1GF1-446

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			REFER TO ALL
			ILLUSTRATIONS OF
			THIS GROUP FOR
			SERVICEABLE PARTS

8V-8247: CONTROL GP-PILOT OPERATED HYD

CONTROL GP-PILOT OPERATED HYD

8V8247 CONTROL GP-PILOT OPERATED HYDRAULIC-PART 2 OF 8
S/N 2ZD1-865, 1GF1-446
9T2630-PAGE 227

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-1281	[1]	UNION-BULKHEAD
2.	030-8144	[2]	REDUCER-FLARED
	1P-1441	[2]	NUT-FLARED
3.	2P-2204	[1]	ELBOW-UNION
	1F-4166	[2]	WASHER
	7F-2050	[2]	LOCKNUT
4.	2P-7215	[4]	ELBOW
	2H-4130	[4]	WASHER
	2P-1279	[4]	LOCKNUT
5.	2V-8572	[6]	HOSE AS 68.6CM(27IN)EA
6.	3V-1974	[1]	HANDLE (BOOM, STICK,
			BUCKET & SWING CONT)
7.	1D-5118	[2]	NUT-JAM
8.	9V-7833	[1]	ROD
9.	9V-8857	[1]	BOOT
10.	0S-1615	[4]	BOLT
	5P-0537	[8]	WASHER
	1B-4330	[4]	NUT
11.	9T-2630 CY	[2]	VALVE GP-PILOT
12.	2R-6806	[5]	CONNECTOR
13.	3J-1907	[6]	SEAL
14.	1P-1376	[1]	CONNECTOR-PORT
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

8V-8247: CONTROL GP-PILOT OPERATED HYD

CONTROL GP-PILOT OPERATED HYD

8V8247 CONTROL GP-PILOT OPERATED HYDRAULIC-PART 3 OF 8
S/N 2ZD1-865, 1GF1-446

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3V-1974	[1]	HANDLE (BOOM, STICK,
			BUCKET & SWING CONTROL)
2.	1D-5118	[2]	NUT-JAM
3.	9V-7833	[1]	ROD
4.	9V-8857	[1]	BOOT
5.	0S-1615	[4]	BOLT
	5P-0537	[8]	WASHER
	1B-4330	[4]	NUT
6.	2R-6806	[5]	CONNECTOR
7.	3J-1907	[6]	SEAL
8.	1P-1376	[1]	CONNECTOR-PORT
9.	2V-8572	[6]	HOSE AS 68.6CM(27IN)EA
10.	2P-7215	[4]	ELBOW
	2H-4130	[4]	WASHER
	2P-1279	[4]	LOCKNUT
11.	030-8144	[2]	REDUCER-FLARED
	1P-1441	[2]	NUT-FLARED
12.	2P-2204	[2]	ELBOW-UNION
	1F-4166	[2]	WASHER
	7F-2050	[2]	LOCKNUT

8V-8247: CONTROL GP-PILOT OPERATED HYD

CONTROL GP-PILOT OPERATED HYD

8V8247 CONTROL GP-PILOT OPERATED HYDRAULIC-PART 4 OF 8
S/N 2ZD1-865, 1GF1-446
3G3818-PAGE 220

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3V-1925	[1]	LEVER AS (STEERING)
2.	8V-8224	[1]	SUPPORT
3.	2V-8912	[1]	TUBE AS
4.	8V-8223	[1]	TREADLE AS-LH
5.	3V-5369	[1]	KNOB
6.	3G-3818 Y	[1]	VALVE GP-CONTROL
			(UNIT TEST-SPEED CONT)
7.	0S-1571	[1]	BOLT
8.	5M-2894	[5]	WASHER
9.	9S-8752	[1]	NUT-FULL
10.	8K-1983	[1]	BOOT
11.	0S-1588	[4]	BOLT
12.	8V-8218	[1]	SUPPORT AS
13.	8K-8604	[2]	BOOT
14.	8V-8222	[1]	TREADLE AS-RH
15.	1C-0569	[2]	BOLT
	9M-1974	[2]	WASHER
16.	2V-8911	[1]	TUBE AS
17.	2R-6806	[2]	CONNECTOR
18.	3J-1907	[2]	SEAL
19.	2K-4973	[2]	LOCKNUT
20.	0T-0065	[2]	BOLT
21.	6S-4039	[1]	GROMMET
22.	2R-6276	[2]	CONNECTOR
	3D-2824	[2]	SEAL-O-RING

23.	2P-1278	[2]	UNION-BULKHEAD
	2P-1279	[2]	LOCKNUT
	Y		SEPARATE ILLUSTRATION

8V-8247: CONTROL GP-PILOT OPERATED HYD

CONTROL GP-PILOT OPERATED HYD

8V8247 CONTROL GP-PILOT OPERATED HYDRAULIC-PART 5 OF 8
S/N 2ZD1-865, 1GF1-446

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8V-6472	[1]	CHANNEL
2.	0S-1594	[2]	BOLT
	5P-1075	[2]	WASHER-HARD
3.	5M-5689	[6]	CLAMP
4.	9V-8329	[1]	CHANNEL
5.	3V-8869	[1]	TUBE AS
6.	0S-1618	[1]	BOLT
7.	2P-1278	[1]	UNION-BULKHEAD
	2P-1279	[1]	LOCKNUT
8.	5S-0003	[3]	NUT-FULL
9.	1B-2790	[2]	BOLT
10.	3V-8868	[1]	TUBE AS
	2R-6806	[1]	CONNECTOR
	3J-1907	[1]	SEAL
11.	8S-7169	[1]	COUPLING
12.	7K-4128	[1]	TEE-FLARED

8V-8247: CONTROL GP-PILOT OPERATED HYD

CONTROL GP-PILOT OPERATED HYD

8V8247 CONTROL GP-PILOT OPERATED HYDRAULIC-PART 6 OF 8
S/N 2ZD1-865, 1GF1-446
9J5447-PAGE 226

Parts for your 229 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7D-0978	[2]	TEE
2.	9S-8896	[1]	CAP
3.	3R-9704	[1]	ELBOW-SWIVEL
4.	5P-2574	[1]	CONNECTOR
5.	3K-0360	[1]	SEAL-O-RING
6.	2V-8910	[1]	TUBE AS
7.	2V-8913	[1]	TUBE AS
8.	2M-8908	[1]	KNOB
9.	2R-6806	[2]	CONNECTOR
10.	2P-1278	[2]	UNION-BULKHEAD
11.	2P-1279	[2]	LOCKNUT
12.	8V-1499	[1]	TUBE AS
13.	2P-1283	[1]	UNION-BULKHEAD
	6K-8420	[1]	LOCKNUT
14.	3R-2705	[1]	UNION-FLARED
15.	8V-1500	[1]	TUBE AS
16.	1B-4201	[1]	NUT-FULL
17.	8V-1498	[1]	TUBE AS
18.	9M-1974	[1]	WASHER
19.	3B-4610	[1]	COTTER (PIN)
20.	9V-8339	[1]	LEVER AS (HYDRAULIC AND
			ANTI-TRAVEL LOCK)
21.	2K-6194	[1]	PIN
22.	9V-8340	[1]	STRIP
23.	9J-5447 Y	[1]	VALVE GP-SELECTOR

24.	0L-1351	[3]	BOLT
	5M-2894	[3]	WASHER
25.	3J-1907	[4]	SEAL
26.	3B-4617	[1]	COTTER (PIN)
	5P-8245	[1]	WASHER
27.	9S-4191	[2]	PLUG-O-RING
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Australia

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CFEL

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-CSARL

Service Letter-Americas

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder 3G2996, Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Boom Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Bucket Cylinder 9J7006 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Bucket Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Stick Cylinder 9J1755 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Stick Cylinder Drift
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Boom Cylinder 9T5230 Attachment
225B & 229 EXCAVATORS HYDRAULIC SYSTEM

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Service Letter-Asia

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws
Boom And/Or Stick Cylinder On Certain 225B And 229 Excavators; And 227 Loggers May Have Metallurgical Flaws

Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators
Boom Cylinder May Separate From The Mounting Pin At The Boom On Certain 225B And 229 Excavators

Bench Test Procedures

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Disassembly and Assembly

Bucket Cylinder
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Stick Cylinder
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Bucket And Stick Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Boom Cylinders
225B & 229 EXCAVATORS VEHICLE SYSTEMS

Service Magazine

New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13

Bolt And Washer (Stop) Removed From Bucket Cylinder Group {5457}
1988/01/25

Hydraulic Cylinder End Bores Can Be Repaired {5456,5457,5458,5470}
1989/02/06

New Seal And Back-up Ring Used In Boom Cylinder Heads{5102,5456}
1989/07/10

New Boom-To-Stick Stop Arrangement{6501,6502}
1989/09/25

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10

New, Stronger Cylinder Piston Used In Boom And Bucket Cylinder Groups{5102,5456,5457}
1991/03/04

Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27

New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03

New Stop Available For Stick Cylinders{5458}
1993/08/16

Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

9J7006 CYLINDER GP-HOE BUCKET 139.7 MM (5.5") BORE X 1087.1 MM (42.8") STROKE PART OF 3V4838, 9C6310 LINKAGE ARS AN ATTACHMENT 229

HYDRAULIC SYSTEM

9J-7006: CYLINDER GP-BUCKET

Parts for your 229 EXCAVATOR:

8V-0495: CONTROL AR-GRAPPLE

Parts for your 229 EXCAVATOR:

8V-0495: CONTROL AR-GRAPPLE

Parts for your 229 EXCAVATOR:

8V-0495: CONTROL AR-GRAPPLE

Parts for your 229 EXCAVATOR:

8V-8247: CONTROL GP-PILOT OPERATED HYD

Parts for your 229 EXCAVATOR:

8V-8247: CONTROL GP-PILOT OPERATED HYD

Parts for your 229 EXCAVATOR:

8V-8247: CONTROL GP-PILOT OPERATED HYD

Parts for your 229 EXCAVATOR:

8V-8247: CONTROL GP-PILOT OPERATED HYD

Parts for your 229 EXCAVATOR:

8V-8247: CONTROL GP-PILOT OPERATED HYD

Parts for your 229 EXCAVATOR:

8V-8247: CONTROL GP-PILOT OPERATED HYD

Parts for your 229 EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 229 :

Truck sale: