AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

135-8826 TURBOCHARGER GP S/N 27Z650-791 PART OF 136-7851 TURBOCHARGER GP AN ATTACHMENT 3516 INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

INDUSTRIAL ENGINE 3516 INDUSTRIAL ENGINE 27Z
 3516 Industrial Engine 27Z00650-00791 SEBP1639 3516 27Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
118-2987 TURBOCHARGER GP
TURBOCHARGER GP
118-2989 TURBOCHARGER GP
TURBOCHARGER GP
135-8826 TURBOCHARGER GP
TURBOCHARGER GP
136-7851 TURBOCHARGER GP
TURBOCHARGER GP
177-9762 TURBOCHARGER GP
TURBOCHARGER GP
177-9764 TURBOCHARGER GP
 

#SEBP16390760
 

135-8826: TURBOCHARGER GP

135-8826 TURBOCHARGER GP
S/N 27Z650-791
PART OF 136-7851 TURBOCHARGER GP
AN ATTACHMENT
i00499885 SEBP1639
1358826 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-2988 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 6I-0850 [1] HOUSING-COMPRESSOR  
3. 135-8827 [1] HOUSING-TURBINE  
4. 7W-2297 [1] CLAMP AS (COMPRESSOR)  
5. 9N-2038 [1] CLAMP AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390761
 

136-7851: TURBOCHARGER GP

136-7851 TURBOCHARGER GP
S/N 27Z650-791
AN ATTACHMENT
i00503536 SEBP1639
1367851 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-4415 [4] COUPLING-ELBOW  
2. 121-5736 [4] GASKET (TURBOCHARGER)  
3. 2N-2765 [16] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 135-8826 Y [4] TURBOCHARGER GP  
5. 168-7800 [16] LOCKNUT (3/8-16-THD)  
6. 6L-3005 [4] CLAMP-BAND  
    (EACH INCLUDES)
  8T-0122 [1] NUT-FULL (1/4-28-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390762
 

177-9762: TURBOCHARGER GP

177-9762 TURBOCHARGER GP
S/N 27Z650-791
PART OF 4P-9380 TURBOCHARGER GP
AN ATTACHMENT
i01237762 SEBP1639
1779762 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 177-1009 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (TURBINE HOUSING)  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 4W-9132 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP (COMPRESSOR HOUSING)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390763
 

177-9764: TURBOCHARGER GP

177-9764 TURBOCHARGER GP
S/N 27Z650-791
PART OF 7C-0681 TURBOCHARGER GP
AN ATTACHMENT
i01255886 SEBP1639
1779764 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3513 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
4. 7C-0626 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 177-1010 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (HOUSING)  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-3515 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390764
 

183-8804: TURBOCHARGER GP

183-8804 TURBOCHARGER GP
S/N 27Z650-791
FIELD REPLACEMENT FOR @@@@@ 7E-0672@@@@@
FIELD INSTALLATION
i01251756 SEBP1639
1838804 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
3. 2W-7219 [1] DIFFUSER  
4. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
5. 3B-4505 [8] LOCKWASHER  
6. 167-9539 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 2W-1248 [4] CLAMP (TURBINE)  
8. 2W-1266 [1] RING-RETAINING  
9. 4W-3871 [1] HOUSING  
10. 2W-1174 [1] NOZZLE  
11. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
12. 9L-3899 [8] LOCK  
13. 2W-1351 [4] CLAMP (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390765
 

192-3714: TURBOCHARGER GP

192-3714 TURBOCHARGER GP
S/N 27Z650-791
FIELD REPLACEMENT FOR @@@@@ 7E-0669@@@@@
FIELD INSTALLATION
i02110438 SEBP1639
1923714 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 2W-1351 [4] CLAMP (COMPRESSOR)  
3. 6V-4297 [1] SEAL-O-RING  
4. 7W-0019 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 191-8359 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (TURBINE)  
9. 2W-1266 [1] RING-RETAINING  
10. 4W-3871 [1] HOUSING  
11. 2W-7220 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390766
 

1W-5932: TURBOCHARGER GP

1W-5932 TURBOCHARGER GP
S/N 27Z650-791
RATED AT 1750 RPM (1603 BKW)
FOR USE WITH FIRE PUMP ENGINE AR
AN ATTACHMENT
i00352631 SEBP1639
1W5932 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9058 CY [2] TURBOCHARGER GP  
2. 7E-5301 [2] COUPLING  
3. 0S-1594 [16] BOLT (3/8-16X1-IN)  
4. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 1W-5533 [2] ADAPTER-EXHAUST  
6. 1W-5505 [2] GASKET-MANIFOLD  
7. 6V-4606 [8] BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN)  
8. 6V-4605 [8] LOCKNUT (5/8-11-THD)  
9. 4D-3704 [16] WASHER-HARD (17X30X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390767
 

1W-5933: TURBOCHARGER GP

1W-5933 TURBOCHARGER GP
S/N 27Z650-791
MARINE AUXILIARY
PART OF 1W-8580 TURBOCHARGER AR
FOR USE WITH MAR PROPULSION ENGINE AR 8N464 RATED AT 1800 RP
AN ATTACHMENT
i00352636 SEBP1639
1W5933 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9109 CY [2] TURBOCHARGER GP  
2. 0S-1594 [16] BOLT (3/8-16X1-IN)  
3. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 1W-7588 [2] COUPLING  
5. 1W-7586 [2] ADAPTER-EXHAUST  
6. 1W-7587 [2] GASKET  
7. 4W-1327 [2] SEAL GP-EXHAUST  
8. 1W-5505 [2] GASKET-MANIFOLD  
9. 0S-1595 [8] BOLT (1/2-13X1.25-IN)  
10. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 4W-1328 [2] SEAL GP-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390768
 

2W-2186: TURBOCHARGER GP

2W-2186 TURBOCHARGER GP -LH
S/N 27Z650-791
PART OF 2W-2343 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 7C-4316@@@@@
FIELD REPLACEMENT FOR 2W-2187 TURBOCHARGER GP
AN ATTACHMENT
i00358364 SEBP1639
2W2186 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 C [1] HOUSING-COMPRESSOR  
4. 2W-7219 C [1] DIFFUSER  
5. 2B-2695 C [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 2W-7224 CY [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-1269 [1] HOUSING  
11. 2W-2189 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390769
 

2W-2343: TURBOCHARGER GP

2W-2343 TURBOCHARGER GP
S/N 27Z650-791
FOR USE WITH GENERATOR SET ENGINES RATED AT 1500 RPM
AN ATTACHMENT
i00358446 SEBP1639
2W2343 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2186 Y [2] TURBOCHARGER GP  
2. 1W-5534 [2] COUPLING  
3. 0S-1594 [16] BOLT (3/8-16X1-IN)  
4. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 1W-5533 [2] ADAPTER-EXHAUST  
6. 1W-5505 [2] GASKET-MANIFOLD  
7. 6V-4606 [8] BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN)  
8. 6V-4605 [8] LOCKNUT (5/8-11-THD)  
9. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
"Off-Size" Bearing Kits Available
1991/10/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/04/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Industrial Engines
Turbocharger
3500 Industrial Engines
Systems Operation
Turbocharger
3500 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
TURBOCHARGERS
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3508)
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3512)
3500 INDUSTRIAL ENGINE
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

TURBOCHARGER GP
118-2989 TURBOCHARGER GP
TURBOCHARGER GP
118-2987 TURBOCHARGER GP
TURBOCHARGER GP
107-7347 TURBOCHARGER GP
TURBOCHARGER GP
102-0300 TURBOCHARGER GP
TURBOCHARGER GP
102-0299 TURBOCHARGER GP
TURBOCHARGER GP
102-0297 TURBOCHARGER GP
TURBOCHARGER GP
102-0296 TURBOCHARGER GP
TURBOCHARGER GP
102-0294 TURBOCHARGER GP
TURBOCHARGER GP
136-7851 TURBOCHARGER GP
TURBOCHARGER GP
177-9762 TURBOCHARGER GP
TURBOCHARGER GP
177-9764 TURBOCHARGER GP
TURBOCHARGER GP
183-8804 TURBOCHARGER GP
TURBOCHARGER GP
192-3714 TURBOCHARGER GP
TURBOCHARGER GP
1W-5932 TURBOCHARGER GP
TURBOCHARGER GP
1W-5933 TURBOCHARGER GP
TURBOCHARGER GP
2W-2186 TURBOCHARGER GP

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.