AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-4326 TURBOCHARGER GP S/N 27Z650-791 PART OF 4W-0503, 9Y-1239 TURBOCHARGER GP AN ATTACHMENT 3516 INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

INDUSTRIAL ENGINE 3516 INDUSTRIAL ENGINE 27Z
 3516 Industrial Engine 27Z00650-00791 SEBP1639 3516 27Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
7C-4323 TURBOCHARGER GP
TURBOCHARGER GP
7C-4324 TURBOCHARGER GP
TURBOCHARGER GP
7C-4326 TURBOCHARGER GP
TURBOCHARGER GP
7C-4328 TURBOCHARGER GP
TURBOCHARGER GP
7C-4329 TURBOCHARGER GP
TURBOCHARGER GP
7C-4330 TURBOCHARGER GP
 

#SEBP16390810
 

7C-4326: TURBOCHARGER GP

7C-4326 TURBOCHARGER GP
S/N 27Z650-791
PART OF 4W-0503, 9Y-1239 TURBOCHARGER GP
AN ATTACHMENT
i00406631 SEBP1639
7C4326 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 8H-3710 [4] SCREW-TAPPING (6-32X0.375-IN)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 7C-4335 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 4W-7249 [1] HOUSING  
11. 4W-9132 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP  
15. 6V-4297 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390811
 

7C-4328: TURBOCHARGER GP

7C-4328 TURBOCHARGER GP
S/N 27Z650-791
FIELD REPLACEMENT ORDER @@@@@ 7E-0677@@@@@
FIELD REPLACEMENT FOR @@@@@ 7W-3477@@@@@
FIELD INSTALLATION
i00406659 SEBP1639
7C4328 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 8H-3710 [4] SCREW-TAPPING (6-32X0.375-IN)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 7W-0019 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 7C-4332 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 2W-8330 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
15. 2W-1351 [4] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390812
 

7C-4329: TURBOCHARGER GP

7C-4329 TURBOCHARGER GP
S/N 27Z650-791
TO ADAPT TO A BELLOWS CONNECTION REFER TO 9Y0542-PAGE
PART OF 9Y-0542 INSTALLATION GP-TURBOCHARGER, 2W-9602, 9Y-0541 TURBOCHARGER GP
AN ATTACHMENT
i00406665 SEBP1639
7C4329 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 8H-3710 [4] SCREW-TAPPING (6-32X0.375-IN)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 7W-0019 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 7C-4334 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 4W-3871 [1] HOUSING  
11. 2W-1174 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP  
15. 6V-4297 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390813
 

7C-4330: TURBOCHARGER GP

7C-4330 TURBOCHARGER GP
S/N 27Z650-791
PART OF 7C-0681 TURBOCHARGER GP
AN ATTACHMENT
i00406672 SEBP1639
7C4330 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3513 [1] HOUSING-COMPRESSOR  
2. 8H-3710 [4] SCREW-TAPPING (6-32X0.375-IN)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 7C-0626 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 7C-4336 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-3515 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
15. 2W-1351 [4] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390814
 

7C-4331: TURBOCHARGER GP

7C-4331 TURBOCHARGER GP
S/N 27Z650-791
PART OF 7C-0680 TURBOCHARGER GP
AN ATTACHMENT
i00406676 SEBP1639
7C4331 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 8H-3710 [4] SCREW-TAPPING (6-32X0.375-IN)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 2W-7219 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 7C-4332 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 4W-9132 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
15. 2W-1351 [4] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390815
 

7E-0665: TURBOCHARGER GP

7E-0665 TURBOCHARGER GP
S/N 27Z650-791
FIELD REPLACEMENT FOR 7C-4316 TURBOCHARGER GP
FIELD INSTALLATION
i00397318 SEBP1639
7E0665 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 2W-7219 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 7E-0684 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (TURBINE)  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-1269 [1] HOUSING  
11. 2W-2189 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390816
 

7E-0669: TURBOCHARGER GP

7E-0669 TURBOCHARGER GP
S/N 27Z650-791
FIELD REPLACEMENT ORDER @@@@@192-3714@@@@@
FIELD REPLACEMENT FOR @@@@@ 7C-4320@@@@@
FIELD INSTALLATION
i00397326 SEBP1639
7E0669 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 2W-1351 [4] CLAMP (COMPRESSOR)  
3. 6V-4297 [1] SEAL-O-RING  
4. 2W-7218 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 7E-0682 Y [1] CARTRIDGE GP-TURBOCHARGER  
  1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
8. 2W-1248 [4] CLAMP (TURBINE)  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 4W-9059 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390817
 

7E-0670: TURBOCHARGER GP

7E-0670 TURBOCHARGER GP
S/N 27Z650-791
i00397334 SEBP1639
7E0670 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 7E-0685 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (TURBINE)  
9. 2W-1266 [1] RING-RETAINING  
10. 4W-7249 [1] HOUSING  
11. 2W-8330 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390818
 

7E-0672: TURBOCHARGER GP

7E-0672 TURBOCHARGER GP
S/N 27Z650-791
FIELD REPLACEMENT ORDER @@@@@183-8804@@@@@
FIELD REPLACEMENT FOR @@@@@ 7C-4323@@@@@
FIELD INSTALLATION
i00397365 SEBP1639
7E0672 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7223 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
3. 2W-7219 [1] DIFFUSER  
4. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
5. 3B-4505 [8] LOCKWASHER  
6. 7E-0684 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 2W-1248 [4] CLAMP (TURBINE)  
8. 2W-1266 [1] RING-RETAINING  
9. 4W-3871 [1] HOUSING  
10. 2W-1174 [1] NOZZLE  
11. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
12. 9L-3899 [8] LOCK  
13. 2W-1351 [4] CLAMP (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390819
 

7E-0673: TURBOCHARGER GP

7E-0673 TURBOCHARGER GP
S/N 27Z670-791
PART OF 4W-1542 TURBOCHARGER GP
i00397368 SEBP1639
7E0673 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 2W-1351 [4] CLAMP (COMPRESSOR)  
3. 2W-1182 [1] DIFFUSER  
4. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
5. 3B-4505 [8] LOCKWASHER  
6. 7E-0685 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 2W-1248 [4] CLAMP (TURBINE)  
8. 2W-1266 [1] RING-RETAINING  
9. 2W-8329 [1] HOUSING  
10. 7W-9932 [1] NOZZLE  
11. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
12. 9L-3899 [8] LOCK  
13. 6V-4297 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
"Off-Size" Bearing Kits Available
1991/10/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/04/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Industrial Engines
Turbocharger
3500 Industrial Engines
Systems Operation
Turbocharger
3500 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
TURBOCHARGERS
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3508)
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3512)
3500 INDUSTRIAL ENGINE
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

TURBOCHARGER GP
7C-4324 TURBOCHARGER GP
TURBOCHARGER GP
7C-4323 TURBOCHARGER GP
TURBOCHARGER GP
7C-4321 TURBOCHARGER GP
TURBOCHARGER GP
7C-4320 TURBOCHARGER GP
TURBOCHARGER GP
7C-4316 TURBOCHARGER GP
TURBOCHARGER GP
7C-0681 TURBOCHARGER GP
TURBOCHARGER GP
7C-0681 TURBOCHARGER GP
TURBOCHARGER GP
7C-0681 TURBOCHARGER GP
TURBOCHARGER GP
7C-4328 TURBOCHARGER GP
TURBOCHARGER GP
7C-4329 TURBOCHARGER GP
TURBOCHARGER GP
7C-4330 TURBOCHARGER GP
TURBOCHARGER GP
7C-4331 TURBOCHARGER GP
TURBOCHARGER GP
7E-0665 TURBOCHARGER GP
TURBOCHARGER GP
7E-0669 TURBOCHARGER GP
TURBOCHARGER GP
7E-0670 TURBOCHARGER GP
TURBOCHARGER GP
7E-0672 TURBOCHARGER GP

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.