AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-3483 TURBOCHARGER GP S/N 71Z243-314 PART OF 4W-1538 TURBOCHARGER GP 3516 INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

INDUSTRIAL ENGINE 3516 INDUSTRIAL ENGINE 27Z
 3516 Industrial Engine 27Z00650-00791 SEBP1639 3516 27Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
7W-3477 TURBOCHARGER GP
TURBOCHARGER GP
7W-3478 TURBOCHARGER GP
TURBOCHARGER GP
7W-3483 TURBOCHARGER GP
TURBOCHARGER GP
7W-9409 TURBOCHARGER GP
TURBOCHARGER GP
7W-9410 TURBOCHARGER GP
TURBOCHARGER GP
7W-9564 TURBOCHARGER GP
 

#SEBP16390830
 

7W-3483: TURBOCHARGER GP

7W-3483 TURBOCHARGER GP
S/N 71Z243-314
PART OF 4W-1538 TURBOCHARGER GP
i00432168 SEBP1639
7W3483 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
2. 2F-0808 [2] SCREW (6X0.25-IN)  
3. 7W-3570 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 7W-2299 [1] HOUSING-COMPRESSOR  
5. 1N-3086 [1] HOUSING (TURBINE)  
6. 7W-2297 [1] CLAMP AS (COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
7. 1N-3259 [4] PLATE-LOCK  
8. 1N-3260 [4] CLAMP  
9. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390831
 

7W-9409: TURBOCHARGER GP

7W-9409 TURBOCHARGER GP
S/N 71Z243-314
PART OF 2W-9601 TURBOCHARGER GP
AN ATTACHMENT
i00418753 SEBP1639
7W9409 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1392 [1] HOUSING (TURBINE)  
2. 7W-3570 Y [1] CARTRIDGE GP-TURBOCHARGER  
3. 7W-2299 [1] HOUSING-COMPRESSOR  
4. 7W-2297 [1] CLAMP AS (COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
5. 1N-3260 [4] CLAMP  
6. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
7. 1N-3259 [4] PLATE-LOCK  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390832
 

7W-9410: TURBOCHARGER GP

7W-9410 TURBOCHARGER GP
S/N 71Z253-353
PART OF 4W-1550 TURBOCHARGER GP
AN ATTACHMENT
i00418756 SEBP1639
7W9410 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2299 [1] HOUSING-COMPRESSOR  
2. 7W-2297 [1] CLAMP AS (COMPRESSOR)(COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
3. 2W-0742 [1] HOUSING (TURBINE)  
4. 1N-3260 [4] CLAMP  
5. 7W-3570 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  1N-3259 [4] PLATE-LOCK  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390833
 

7W-9564: TURBOCHARGER GP

7W-9564 TURBOCHARGER GP
S/N 71Z243-353
PART OF 4W-2175 TURBOCHARGER GP
AN ATTACHMENT
i00418901 SEBP1639
7W9564 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0443 [1] HOUSING AS-TURBINE  
2. 3B-0645 B [3] PLUG-CUP  
3. 4N-0932 B [4] PLUG-CUP  
  3P-1896 B [3] PLUG-CUP (ALTERNATE)  
  100-6816 B [4] PLUG-CUP (ALTERNATE)  
4. 7W-3570 Y [1] CARTRIDGE GP-TURBOCHARGER  
5. 7W-2299 [1] HOUSING-COMPRESSOR  
6. 7W-2297 [1] CLAMP AS (COMPRESSOR)(COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
7. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  1N-3259 [4] PLATE-LOCK  
8. 1N-3260 [4] CLAMP (TURBINE)  
9. 1B-5174 [4] PLUG-PIPE  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390834
 

7W-9931: TURBOCHARGER GP

7W-9931 TURBOCHARGER GP
S/N 27Z650-655
PART OF 4W-1542 TURBOCHARGER GP
i00419423 SEBP1639
7W9931 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 4W-9133 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [2] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-9932 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
15. 2W-1351 [4] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390835
 

7W-9934: TURBOCHARGER GP

7W-9934 TURBOCHARGER GP
S/N 27Z650-791
PART OF 4W-0503 TURBOCHARGER GP
AN ATTACHMENT
i00419432 SEBP1639
7W9934 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 4W-9133 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [2] CLAMP (TURBINE)  
9. 2W-1266 [1] RING-RETAINING  
10. 4W-7249 [1] HOUSING  
11. 4W-9132 [1] NOZZLE (TURBINE)  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP (COMPRESSOR)  
15. 6V-4297 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390836
 

8N-1852: TURBOCHARGER GP

8N-1852 TURBOCHARGER GP
S/N 71Z243-353
PART OF 1W-8579 TURBOCHARGER AR
AN ATTACHMENT
i00429347 SEBP1639
8N1852 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1226 CY [1] TURBOCHARGER GP (LH)  
2. 4W-1456 [2] COUPLING-EXHAUST  
3. 4W-1227 CY [1] TURBOCHARGER GP (RH)  
4. 4W-1478 [4] SEAL GP-EXHAUST  
5. 4W-1454 [2] ADAPTER-EXHAUST  
6. 2N-2766 [8] LOCKNUT (3/8-16-THD)  
7. 7M-7273 [2] GASKET  
8. 0S-1594 [8] BOLT (3/8-16X1-IN)  
  5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 4W-2359 [2] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390837
 

9Y-0541: TURBOCHARGER GP

9Y-0541 TURBOCHARGER GP
S/N 27Z650-791
PART OF 7W-7651 CONVERSION AR, 7W-3389 TURBOCHARGER GP
AN ATTACHMENT
i00436906 SEBP1639
9Y0541 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4329 Y [2] TURBOCHARGER GP  
2. 0S-1595 [8] BOLT (1/2-13X1.25-IN)  
3. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1W-5505 [2] GASKET-MANIFOLD  
5. 0S-1594 [32] BOLT (3/8-16X1-IN)  
6. 5M-2894 [32] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7C-9234 [2] BELLOWS AS  
8. 7C-9235 [2] LINER  
9. 1W-7587 [4] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390838
 

9Y-1239: TURBOCHARGER GP

9Y-1239 TURBOCHARGER GP
S/N 27Z650-791
PART OF 7W-3390 TURBOCHARGER AR
AN ATTACHMENT
i00437764 SEBP1639
9Y1239 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4326 Y [2] TURBOCHARGER GP  
2. 0S-1595 [8] BOLT (1/2-13X1.25-IN)  
3. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1W-5505 [2] GASKET-MANIFOLD  
5. 0S-1594 [32] BOLT (3/8-16X1-IN)  
6. 5M-2894 [32] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7C-9234 [2] BELLOWS AS  
8. 7C-9235 [2] LINER  
9. 1W-7587 [4] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16390839
 

9Y-1239: TURBOCHARGER GP

9Y-1239 TURBOCHARGER GP
S/N 27Z650-791
PART OF 7W-3390 TURBOCHARGER AR
AN ATTACHMENT
i00437768 SEBP1639
9Y1239 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0675 CY [2] TURBOCHARGER GP  
2. 7B-3235 [8] BOLT (1/2-13X1.375-IN)  
3. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1W-5505 [2] GASKET-MANIFOLD  
5. 0S-1594 [32] BOLT (3/8-16X1-IN)  
6. 5M-2894 [32] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6I-2392 [2] BELLOWS AS  
8. 1W-7587 [4] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
"Off-Size" Bearing Kits Available
1991/10/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/04/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Industrial Engines
Turbocharger
3500 Industrial Engines
Systems Operation
Turbocharger
3500 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
TURBOCHARGERS
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3508)
3500 INDUSTRIAL ENGINE
TURBOCHARGERS (3512)
3500 INDUSTRIAL ENGINE
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

TURBOCHARGER GP
7W-3478 TURBOCHARGER GP
TURBOCHARGER GP
7W-3477 TURBOCHARGER GP
7W-3389 TURBOCHARGER GP
TURBOCHARGER GP
7W-3387 TURBOCHARGER GP
TURBOCHARGER GP
7W-2126 TURBOCHARGER GP
TURBOCHARGER GP
7E-6435 TURBOCHARGER GP
TURBOCHARGER GP
7E-0680 TURBOCHARGER GP
TURBOCHARGER GP
7E-0679 TURBOCHARGER GP
TURBOCHARGER GP
7W-9409 TURBOCHARGER GP
TURBOCHARGER GP
7W-9410 TURBOCHARGER GP
TURBOCHARGER GP
7W-9564 TURBOCHARGER GP
TURBOCHARGER GP
7W-9931 TURBOCHARGER GP
TURBOCHARGER GP
7W-9934 TURBOCHARGER GP
TURBOCHARGER GP
8N-1852 TURBOCHARGER GP
TURBOCHARGER GP
9Y-0541 TURBOCHARGER GP
TURBOCHARGER GP
9Y-1239 TURBOCHARGER GP

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.