8N-8477 STARTING MOTOR GP-AIR -RH STANDARD ENGINE ROTATION FOR USE WITH SAE NO. 00 FLYWHEEL HOUSING AN ATTACHMENT 3516

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

0. 8N-8477 STARTING M
1. 8N-8479 STARTING M
2. 106-8551 STARTING M
3. 106-8554 STARTING M
4. 107-0997 STARTING M
5. 107-0997 STARTING M
6. 107-0998 STARTING M
7. 108-5546 STARTING M
8. 108-5547 STARTING M
9. 143-5153 STARTING M
0. INFORMATION

INDUSTRIAL ENGINE 3516 INDUSTRIAL ENGINE 27Z
3516 Industrial Engine 27Z00650-00791 SEBP1639 3516 27Z (1982)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

7C-3374 STARTING MOTOR GP-AIR

8N-8476 STARTING MOTOR GP-AIR

8N-8477 STARTING MOTOR GP-AIR

8N-8479 STARTING MOTOR GP-AIR

106-8551 STARTING MOTOR GP-ELECTRIC

106-8554 STARTING MOTOR GP-ELECTRIC

#SEBP16391330

8N-8477: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

8N-8477 STARTING MOTOR GP-AIR -RH
STANDARD ENGINE ROTATION
FOR USE WITH SAE NO. 00 FLYWHEEL HOUSING
AN ATTACHMENT

i00415332 SEBP1639

8N8477 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-5107 Y	[1]	STARTING MOTOR GP-AIR
2.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
3.	4H-7869	[1]	GASKET
4.	8N-8451	[1]	GASKET
5.	8N-8446	[1]	ELBOW
6.	1D-4566	[4]	BOLT (1/2-13X3.5-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP16391331

8N-8479: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

8N-8479 STARTING MOTOR GP-AIR
RH-SAE OPPOSITE STANDARD ENGINE ROTATION
FOR USE WITH SAE NO.00 FLYWHEEL HOUSING
AN ATTACHMENT

i00415348 SEBP1639

8N8479 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
2.	3H-0510	[1]	GASKET
3.	4W-5109 CY	[1]	STARTING MOTOR GP-AIR
4.	8N-8446	[1]	ELBOW
	8N-8451	[1]	GASKET
5.	1D-4566	[4]	BOLT (1/2-13X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP16391332

106-8551: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

106-8551 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-4246 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT

i00491972 SEBP1639

1068551 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8F-1434	[2]	LOCKWASHER
2.	6V-8188	[4]	NUT (1/2-13-THD)
3.	8T-8566	[1]	TERMINAL AS
4.	7X-0562	[4]	WASHER-HARD (13.5X19X0.8-MM THK)
5.	3T-3422	[1]	WIRE AS
6.	7T-3278	[1]	HOLDER AS-BRUSH
7.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
8.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	7T-3276	[2]	ARMATURE AS (24-VOLT)
10.	4M-1831	[1]	PLUG-LEVER HOUSING
11.	7L-2894	[1]	GASKET
12.	9X-9511	[1]	SOLENOID AS (24-VOLT)(STARTING MOTOR)
13.	036-9821	[1]	WASHER
14.	7T-3269	[1]	BOOT
15.	4M-1828	[1]	RETAINER-SPRING
16.	9M-7609	[1]	SPRING (SHIFT LEVER)
17.	4M-1827	[1]	RETAINER-SPRING
18.	2H-3429	[1]	RING-RETAINING
19.	4B-2049	[3]	NUT (10-32-THD)
20.	6N-3826	[1]	DRIVE AS-MOTOR
21.	9X-4824	[1]	COVER-STARTING MOTOR
22.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
23.	7T-3277	[1]	COIL AS-FIELD
24.	7T-3454	[1]	INSULATOR
25.	8H-1141	[4]	SHOE-POLE
26.	3F-0379	[8]	SCREW-POLE SHOE (3/8-24-THD)
27.	7T-3271	[1]	CONNECTOR
28.	8T-8569	[1]	INSULATOR-TERMINAL
29.	7T-3451	[1]	KIT-INSULATOR (STARTING MOTOR)
30.	3E-7775	[1]	HOUSING AS
31.	036-9823	[5]	BOLT (1/4-28X1-IN)
32.	7T-3974	[1]	HOUSING AS-DRIVE
33.	3T-3434	[6]	PLUG
34.	7X-3373	[6]	BOLT (5/16-18X0.88-IN)
35.	7T-3270	[1]	PLUNGER AS
36.	7T-3279	[1]	HOUSING AS

			AVAILABLE REPAIR KIT(S):
	8C-3655	[1]	KIT-BRUSH (STARTING MOTOR)
			(KIT INCLUDES SPRINGS, BRUSHES, SEAL, SCREW ASSEMBLIES & SCREWS)
	7T-3267	[1]	KIT-BUSHING (STARTING MOTOR)
			(KIT INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW ASSEMBLIES, WASHERS, SPACER & NUT)
	7T-3268	[1]	KIT-LEVER (STARTING MOTOR)
			(KIT INCLUDES GASKET, RETAINER, LEVER ASSEMBLIES, NUT & SEALS)
	8T-9884	[1]	KIT-INSULATOR (STARTING MOTOR)
			(KIT INCLUDES BUSHING & INSULATORS)

#SEBP16391333

106-8554: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

106-8554 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC

i00090223 SEBP1639

1068554 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8F-1434	[2]	LOCKWASHER
2.	6V-8188	[4]	NUT (1/2-13-THD)
3.	8T-8566	[1]	TERMINAL AS
4.	7X-0562	[4]	WASHER-HARD (13.5X19X0.8-MM THK)
5.	3T-3422	[1]	WIRE AS
6.	7T-3278	[1]	HOLDER AS-BRUSH
7.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
8.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	7T-3276	[1]	ARMATURE AS (24-VOLT)
10.	4M-1831	[1]	PLUG-LEVER HOUSING
11.	7L-2894	[1]	GASKET
12.	250-8279	[1]	KIT-SOLENOID (24-VOLT)(STARTING MOTOR)
			(INCLUDES BOLT, COVER, CONNECTORS, NUTS & SOLENOID AS)
13.	036-9821	[1]	WASHER
14.	306-3997	[1]	BOOT
15.	4M-1828	[1]	RETAINER-SPRING
16.	9M-7609	[1]	SPRING (SHIFT LEVER)
17.	4M-1827	[1]	RETAINER-SPRING
18.	2H-3429	[1]	RING-RETAINING
19.	4B-2049	[3]	NUT (10-32-THD)
20.	6N-3826	[1]	DRIVE AS-MOTOR
21.	9X-4824	[1]	COVER-STARTING MOTOR
22.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
23.	7T-3277	[1]	COIL AS-FIELD
24.	7T-3454	[1]	INSULATOR
25.	8H-1141	[4]	SHOE-POLE
26.	3R-8797	[8]	SCREW & WASHER AS (3/8-24X0.72-IN)
27.	283-1107	[1]	KIT-CONNECTOR (STARTING MOTOR)
			(INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
28.	8T-8569	[1]	INSULATOR-TERMINAL
29.	7T-3451	[1]	KIT-INSULATOR (STARTING MOTOR)
30.	3E-7775	[1]	HOUSING AS
31.	0S-1597	[5]	BOLT (1/4-28X1-IN)
32.	7T-3974	[1]	HOUSING AS-DRIVE
33.	3T-3434	[6]	PLUG
34.	7X-3373	[6]	BOLT (5/16-18X0.88-IN)
35.	7T-3270	[1]	PLUNGER AS
36.	7T-3279	[1]	HOUSING AS

			AVAILABLE REPAIR KIT(S):
	8C-3655	[1]	KIT-BRUSH (STARTING MOTOR)
			(INCLUDES SPRINGS, BRUSH ASSEMBLIES & SCREWS)
	7T-3267	[1]	KIT-BUSHING (STARTING MOTOR)
			(INCLUDES NUT, SPACER, GASKET, BUSHINGS, WICKS, CUPS, SEALS & SCREW ASSEMBLIES)
	7T-3268	[1]	KIT-LEVER (STARTING MOTOR)
			(INCLUDES RETAINER, LEVER ASSEMBLIES, NUT & SEALS)
	8T-9884	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES BUSHING & INSULATORS)

#SEBP16391334

107-0997: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

107-0997 STARTING MOTOR GP-ELECTRIC
PART OF 108-5546 STARTING MOTOR GP-ELECTRIC
Type 1
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
AN ATTACHMENT

i00493611 SEBP1639

1070997 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	036-9823	[13]	BOLT (1/4-28X1-IN)
2.	3L-3380	[1]	BUSHING-TERMINAL
3.	3T-3418	[1]	FRAME AS-END
4.	3T-3423	[1]	CUP
5.	9G-4101	[1]	BUSHING-END
6.	3T-3424	[1]	PLUG-FELT
7.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
8.	7M-8651	[1]	ARMATURE AS
9.	7M-0324	[1]	COIL AS-FIELD
10.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
11.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
12.	6V-8188	[6]	NUT (1/2-13-THD)
13.	7M-0326	[1]	CONNECTOR
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	3E-7769	[1]	SOLENOID AS (STARTER)
16.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
17.	4M-1831	[4]	PLUG-LEVER HOUSING
18.	7L-2894	[4]	GASKET
19.	3F-0379	[12]	SCREW-POLE SHOE (3/8-24-THD)
20.	7M-0325	[1]	INSULATOR
21.	7F-3488	[6]	SHOE-POLE
22.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
23.	3T-9524	[6]	BRUSH AS
24.	9S-2544	[6]	SCREW-HEX HEAD (8-32X11.13-MM)
25.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
26.	6T-0371	[1]	INSULATOR
27.	3T-4711	[12]	SCREW AS (10-32X17.5-MM)
	9F-5599	[12]	LOCKWASHER
28.	7F-3525	[6]	WASHER-SPECIAL (0.207X0.39X0.09-IN THK)
29.	6T-0372	[1]	PLATE
30.	3T-4709	[3]	PLATE
31.	2L-6679	[3]	PLATE-INSULATOR
32.	3T-4710	[3]	PLATE
33.	6T-0363	[6]	HOLDER AS-BRUSH
			(EACH INCLUDES)
34.	3T-9494	[1]	SPRING
35.	2D-6392	[1]	SEAL-O-RING
36.	2J-8163	[2]	SEAL-O-RING
37.	7F-3491	[2]	WASHER (0.516X1X0.094-IN THK)
38.	3R-8801	[1]	CLAMP
39.	6N-3826	[1]	DRIVE AS-MOTOR
40.	1H-2629	[3]	STRIP-INSULATION
41.	6V-4155	[1]	TERMINAL AS
42.	9M-7606	[1]	PLUNGER AS
43.	036-9821	[1]	WASHER
44.	4M-1829	[1]	BOOT-RUBBER
45.	4M-1828	[1]	RETAINER-SPRING
46.	9M-7609	[1]	SPRING (SHIFT LEVER)
47.	1H-1023	[1]	SEAL-O-RING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	3T-3424	[2]	PLUG-FELT
50.	3T-3423	[2]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1854	[1]	SHAFT-LEVER
55.	2H-3429	[2]	RING-RETAINING
56.	4M-1853	[1]	LEVER AS-SHIFT
57.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
58.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
59.	4M-1827	[1]	RETAINER-SPRING
60.	8C-3089	[1]	SEAL-O-RING
61.	7T-3974	[1]	HOUSING AS-DRIVE
62.	4M-1896	[1]	BUSHING-TERMINAL
63.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
64.	3T-9494	[6]	SPRING
65.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
66.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES PARTS MARKED J)
	JZ	[1]	INSULATOR
67.	JZ	[1]	BUSHING
68.	JZ	[1]	BUSHING
69.	JZ	[1]	WASHER
70.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
71.	6N-3279	[1]	INSULATOR
72.	4B-2049	[2]	NUT (10-32-THD)
73.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
74.	8F-1434	[2]	LOCKWASHER
75.	3T-3434 B	[6]	PLUG
	B		USE AS REQUIRED
	J		(null)
	Z		NOT SERVICED SEPARATELY

#SEBP16391335

107-0997: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

107-0997 STARTING MOTOR GP-ELECTRIC
PART OF 108-5546 STARTING MOTOR GP-ELECTRIC
Type 2
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
AN ATTACHMENT

i05808941 SEBP1639

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1597 C	[13]	BOLT (1/4-28X1-IN)
2.	3L-3380	[1]	BUSHING-TERMINAL
3.	3T-3418	[1]	FRAME AS-END
4.	3T-3423	[1]	CUP
5.	9G-4101	[1]	BUSHING-END
6.	3T-3424	[1]	PLUG-FELT
7.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
8.	7M-8651	[1]	ARMATURE AS
9.	7M-0324	[1]	COIL AS-FIELD
10.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
11.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
12.	6V-8188	[6]	NUT (1/2-13-THD)
13.	7M-0326	[1]	CONNECTOR
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	3E-7769	[1]	SOLENOID AS (STARTER)
16.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
17.	4M-1831	[4]	PLUG-LEVER HOUSING
18.	7L-2894	[4]	GASKET
19.	3R-8797 C	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
20.	7M-0325	[1]	INSULATOR
21.	7F-3488	[6]	SHOE-POLE
22.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
23.	3T-9524	[6]	BRUSH AS
24.	9S-2544	[6]	SCREW-HEX HEAD (8-32X11.13-MM)
25.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
35.	2D-6392	[1]	SEAL-O-RING
36.	2J-8163	[2]	SEAL-O-RING
37.	1T-0808 C	[2]	WASHER (0.516X0.812X0.09-IN THK)
38.	3R-8801	[1]	CLAMP
39.	6N-3826	[1]	DRIVE AS-MOTOR
40.	1H-2629	[3]	STRIP-INSULATION
42.	9M-7606	[1]	PLUNGER AS
43.	036-9821	[1]	WASHER
44.	306-3998 C	[1]	BOOT-RUBBER
45.	4M-1828	[1]	RETAINER-SPRING
46.	9M-7609	[1]	SPRING (SHIFT LEVER)
47.	1H-1023	[1]	SEAL-O-RING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	3T-3424	[2]	PLUG-FELT
50.	3T-3423	[2]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1854	[1]	SHAFT-LEVER
55.	2H-3429	[2]	RING-RETAINING
56.	4M-1853	[1]	LEVER AS-SHIFT
57.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
58.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
59.	4M-1827	[1]	RETAINER-SPRING
60.	8C-3089	[1]	SEAL-O-RING
61.	7T-3974	[1]	HOUSING AS-DRIVE
62.	4M-1896	[1]	BUSHING-TERMINAL
63.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
64.	3T-9494	[6]	SPRING
65.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
66.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES PARTS MARKED J IN GRAPHIC)
70.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
71.	6N-3279	[1]	INSULATOR
72.	4B-2049	[2]	NUT (10-32-THD)
73.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
74.	8F-1434	[2]	LOCKWASHER
75.	3T-3434 B	[6]	PLUG
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP16391336

107-0998: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

107-0998 STARTING MOTOR GP-ELECTRIC
PART OF 108-5547 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i00493613 SEBP1639

1070998 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	036-9823	[13]	BOLT (1/4-28X1-IN)
2.	3L-3380	[1]	BUSHING-TERMINAL
3.	3T-5440	[1]	FRAME AS-END
4.	3T-3423	[1]	CUP
5.	9G-4101	[1]	BUSHING-END
6.	3T-3424	[1]	PLUG-FELT
7.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
8.	7M-8651	[1]	ARMATURE AS
9.	5L-6425	[1]	COIL AS-FIELD
10.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
11.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
12.	6V-8188	[6]	NUT (1/2-13-THD)
13.	7M-0326	[1]	CONNECTOR
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	3E-7769	[1]	SOLENOID AS (STARTER)
16.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
17.	4M-1831	[4]	PLUG-LEVER HOUSING
18.	7L-2894	[4]	GASKET
19.	3F-0379	[12]	SCREW-POLE SHOE (3/8-24-THD)
20.	7M-0325	[1]	INSULATOR
21.	7F-3488	[6]	SHOE-POLE
22.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
23.	3T-9524	[6]	BRUSH AS
24.	9S-2544	[6]	SCREW-HEX HEAD (8-32X11.13-MM)
25.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
26.	6T-0371	[1]	INSULATOR
27.	3T-4711	[12]	SCREW AS (10-32X17.5-MM)
	9F-5599	[12]	LOCKWASHER
28.	7F-3525	[6]	WASHER-SPECIAL (0.207X0.39X0.09-IN THK)
29.	6T-0372	[1]	PLATE
30.	3T-4709	[3]	PLATE
31.	2L-6679	[3]	PLATE-INSULATOR
32.	3T-4710	[3]	PLATE
33.	6T-0363	[6]	HOLDER AS-BRUSH
			(EACH INCLUDES)
34.	3T-9494	[1]	SPRING
35.	2D-6392	[1]	SEAL-O-RING
36.	2J-8163	[2]	SEAL-O-RING
37.	7F-3491	[2]	WASHER (0.516X1X0.094-IN THK)
38.	3R-8801	[1]	CLAMP
39.	3T-5343	[1]	DRIVE AS-MOTOR
40.	1H-2629	[3]	STRIP-INSULATION
41.	6V-4155	[1]	TERMINAL AS
42.	9M-7606	[1]	PLUNGER AS
43.	036-9821	[1]	WASHER
44.	4M-1829	[1]	BOOT-RUBBER
45.	4M-1828	[1]	RETAINER-SPRING
46.	9M-7609	[1]	SPRING (SHIFT LEVER)
47.	1H-1023	[1]	SEAL-O-RING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	3T-3424	[2]	PLUG-FELT
50.	3T-3423	[2]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1854	[1]	SHAFT-LEVER
55.	2H-3429	[2]	RING-RETAINING
56.	4M-1853	[1]	LEVER AS-SHIFT
57.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
58.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
59.	4M-1827	[1]	RETAINER-SPRING
60.	8C-3089	[1]	SEAL-O-RING
61.	7T-3974	[1]	HOUSING AS-DRIVE
62.	4M-1896	[1]	BUSHING-TERMINAL
63.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
64.	3T-9494	[6]	SPRING
65.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
66.	3N-3763 J	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHERS)
	JZ	[1]	INSULATOR
67.	JZ	[1]	BUSHING
68.	JZ	[1]	BUSHING
69.	JZ	[1]	WASHER
70.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
71.	6N-3279	[1]	INSULATOR
72.	4B-2049	[2]	NUT (10-32-THD)
73.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
74.	8F-1434	[2]	LOCKWASHER
75.	3T-3434 B	[6]	PLUG
	B		USE AS REQUIRED
	J		KIT(S) MARKED J INCLUDES PART(S) MARKED J
	Z		NOT SERVICED SEPARATELY

#SEBP16391337

108-5546: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

108-5546 STARTING MOTOR GP-ELECTRIC
FOR USE WITH 64-VOLT STARTING SYSTEM
AN ATTACHMENT

i00484061 SEBP1639

1085546 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-0997 Y	[2]	STARTING MOTOR GP-ELECTRIC
2.	4H-7869	[2]	GASKET
3.	7J-8902	[6]	BOLT-12 POINT HEAD (5/8-11X1.5-IN)
4.	4L-6155	[1]	CABLE AS (0000-GA)
	5P-0745 BG		CABLE (0000-GA)
	3L-7634	[2]	TERMINAL-RING (0000-GA, 1/2-IN SCREW)
5.	294-2319	[2]	COVER-TERMINAL (BLACK)
	B		USE AS REQUIRED
	G		ORDER BY THE INCH
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP16391338

108-5547: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

108-5547 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i00484063 SEBP1639

1085547 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-0998 Y	[2]	STARTING MOTOR GP-ELECTRIC
2.	4H-7869	[2]	GASKET
3.	7J-8902	[6]	BOLT-12 POINT HEAD (5/8-11X1.5-IN)
4.	4L-6155	[1]	CABLE AS (0000-GA)
5.	3L-7604	[2]	SHIELD-TERMINAL
	Y		SEPARATE ILLUSTRATION

#SEBP16391339

143-5153: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

143-5153 STARTING MOTOR GP-ELECTRIC
S/N 27Z650-791
AN ATTACHMENT

i00649009 SEBP1639

1435153 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	143-8433 Y	[1]	STARTING MOTOR GP-ELECTRIC
2.	4H-7869	[2]	GASKET
3.	7J-8902	[6]	BOLT-12 POINT HEAD (5/8-11X1.5-IN)
4.	4L-6155	[1]	CABLE AS (0000-GA)
	5P-0745 BE		CABLE (0000-GA)
	3L-7634	[2]	TERMINAL-RING (0000-GA, 1/2-IN SCREW)
5.	3L-7604	[2]	SHIELD-TERMINAL
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

General Service Information

Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Engine News

New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26

Improved Valve Used In Air Starting Lines Groups
1984/06/20

New Air Start And Override Valve Has Stronger Mounting
1984/06/20

Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1984/12/12

Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1985/02/01

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01

Testing The Starter On The Engine
1987/05/01

Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01

Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01

Magnetic Switches (Starter Relays) Improved
1988/03/01

Air Starter Relay Valve Improved
1991/07/01

New Electric Starting Motor Group Available {1453,1467}
1994/05/01

New Starting Motors Used {1453}
2002/05/01

Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01

Operation and Maintenance Manual

Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines

Air Starting Motor Lubricator Bowl - Clean
3500 Industrial and Generator Set Engines

Air Starting Motor Lubricator Oil Level - Check
3500 Industrial and Generator Set Engines

Starting Motor - Inspect
3500 Industrial and Generator Set Engines

Cold Weather Starting
3500 Industrial and Generator Set Engines

Starting the Engine
3500 Industrial and Generator Set Engines

Air Starting Motor - Inspect
3500 Industrial and Generator Set Engines

Special Instruction

Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}

Caterpillar PRELUB® Diagnostics{1469}
Caterpillar PRELUB^® Diagnostics{1469}

Solenoid (Starting Motor) − Replace{1467}
Solenoid (Starting Motor) − Replace{1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
3500 Industrial Engines

Air Starting Motor
3500 Industrial Engines

Air Starting Motor Pressure Regulating Valve
3500 Industrial Engines

Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor
Starting Motor - Delco 50-MT

Electric Starting Motor
3500 Industrial Engines

Systems Operation

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors

Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor
3500 Industrial Engines

Component Description
Starting Motor - Delco 50-MT

General Information
Starting Motor - Delco 50-MT

Normal Operation
Starting Motor - Delco 50-MT

Testing and Adjusting

Electric Starting System
3500 Industrial Engines

Pinion Clearance Adjustment
3500 Industrial Engines

No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Pressure Regulating Valve
3500 Industrial Engines

Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors

Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT

Field Winding - Test
Starting Motor - Delco 50-MT

Armature - Test
Starting Motor - Delco 50-MT

Brush and Brush Holder - Check
Starting Motor - Delco 50-MT

Pinion Drive - Check
Starting Motor - Delco 50-MT

No Load - Test
Starting Motor - Delco 50-MT

Pinion Clearance - Adjust
Starting Motor - Delco 50-MT

Troubleshooting

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
Starting Motor - Delco 50-MT

Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT

Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT

Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT

Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT

Disassembly and Assembly

AIR STARTER (AN ATTACHMENT)
3500 INDUSTRIAL ENGINE

Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
Starting Motor - Delco 50-MT

Starting Motor - Disassemble
Starting Motor - Delco 50-MT

Starting Motor - Assemble
Starting Motor - Delco 50-MT

Service Magazine

Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28

New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17

Improved Valve Used In Air Starting Lines Groups{1451}
1984/05/21

New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11

Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1984/12/10

Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1985/02/11

New Seal Prevents Oil Leakage From Threads Of Magnetic Speed Pickups{7487,7462}
1986/06/09

Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

Testing The Starter On The Engine{1401,1450}
1987/05/04

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Air Starter Relay Valve Improved{1462}
1991/06/24

Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

Caterpillar Parts SIS Catalog 3516 :

8N-8476 STARTING MOTOR GP-AIR

7C-3374 STARTING MOTOR GP-AIR

7C-3373 STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR

7C-3371 STARTING MOTOR GP-AIR

4W-5109 STARTING MOTOR GP-AIR

4W-5108 STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR

8N-8479 STARTING MOTOR GP-AIR

106-8551 STARTING MOTOR GP-ELECTRIC

106-8554 STARTING MOTOR GP-ELECTRIC

107-0997 STARTING MOTOR GP-ELECTRIC

107-0998 STARTING MOTOR GP-ELECTRIC

108-5546 STARTING MOTOR GP-ELECTRIC

108-5547 STARTING MOTOR GP-ELECTRIC

Truck sale:

719,892

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

298,989

Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

800,000

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC