STEERING SYSTEM
STEERING COLUMN GPOPERATOR STATION
CONTROL GP-STEERINGSTEERING SYSTEM
PUMP GP-METERINGSTEERING SYSTEM
STEERING COLUMN GP
#SEBP16400440
6W-6661: STEERING COLUMN GP-ADJUSTABLE
6W6661 COLUMN GP-STEERING-ADJUSTABLE-PART 2 OF 2
S/N 85X1637-UP
S/N 85X1637-UP
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 28. | 6J-0488 C | [2] | SCREW-HEAD | |
| 29. | 7X-0772 | [2] | WASHER-HARD | |
| 30. | 8T-5070 | [1] | SETSCREW-SOCKET | |
| 7V-3827 | [1] | SPRING | ||
| 2D-6642 | [1] | BALL | ||
| 31. | 9K-6764 | [1] | KNOB | |
| 5B-9079 | [1] | NUT-JAM | ||
| 32. | 7V-2377 | [1] | PIN | |
| 9F-7882 | [1] | PIN-SPRING | ||
| 33. | 8F-7702 | [1] | SEAL-LIP | |
| 34. | 5L-4041 | [4] | BOLT-12 POINT HEAD | |
| 35. | 2S-0987 | [2] | DOWEL | |
| 36. | 4V-6394 | [1] | LEVER | |
| 37. | 0T-0278 | [1] | SPRING | |
| 38. | 4V-6391 | [1] | BOSS | |
| 39. | 4V-5102 | [1] | SHAFT-GOVERNOR CONTROL | |
| 40. | 6V-8801 | [3] | NUT | |
| 41. | 5V-7610 | [1] | NUT | |
| 42. | 4V-6389 | [1] | PLATE AS | |
| 1M-1744 | [1] | SPACER | ||
| 9F-2978 | [2] | NUT-WELD | ||
| 43. | 4V-6393 | [1] | SUPPORT | |
| 44. | 4L-6454 C | [2] | BOLT (3/8-16 X 1.0IN) | |
| 8T-4896 C | [2] | WASHER-HARD (2.5MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP16400441
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-HEAD TAPPING | |
| 4. | 032-5678 | [1] | WHEEL-HAND STEERING | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 0S-1571 | [4] | BOLT | |
| 5M-2894 | [4] | WASHER | ||
| 10. | 3G-7387 CY | [1] | PUMP GP-METERING | |
| 11. | 9S-1354 | [1] | NUT | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16400442
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-HEAD TAPPING | |
| 4. | 032-5678 | [1] | WHEEL-HAND STEERING | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 5S-7383 C | [4] | BOLT | |
| 8T-4896 C | [4] | WASHER-HARD | ||
| 10. | 4T-7387 CY | [1] | PUMP GP-METERING | |
| 11. | 9S-1354 | [1] | NUT | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16400443
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-HEAD TAPPING | |
| 4. | 032-5678 | [1] | WHEEL-HAND STEERING | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 5S-7383 | [4] | BOLT (3/8-16X1.75IN) | |
| 8T-4896 | [4] | WASHER-HARD (18.5MM)OD | ||
| 10. | 6E-6406 CY | [1] | PUMP GP-METERING | |
| 11. | 9S-1354 | [1] | NUT (5/8-18 THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP16400444
3G-7387: PUMP GP-METERING
3G7387 PUMP GP-METERING
S/N 85X1194-1546
PART OF 2V4283 CONTROL-STEERING
FIELD REPLACEMENT ORDER 1198767-PAGE 197.03
S/N 85X1194-1546
PART OF 2V4283 CONTROL-STEERING
FIELD REPLACEMENT ORDER 1198767-PAGE 197.03
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8F-5340 | [1] | SEAL-LIP (25.4MM ID) | |
| 2. | 3G-6906 | [1] | SCREW | |
| 3. | 1H-1023 | [1] | SEAL-O-RING (9.25MM ID) | |
| 4. | 3G-6907 | [1] | SEAT | |
| 5. | 5F-9144 | [1] | SEAL-O-RING (7.65MM ID) | |
| 6. | 6S-7827 | [1] | BALL | |
| 7. | 6S-7826 | [1] | RETAINER-BALL | |
| 8. | 3G-6905 | [1] | SPACER | |
| 9. | 7J-6833 | [1] | SEAL | |
| 10. | 9J-5686 | [3] | SEAL-O-RING (72.75MM ID) | |
| 11. | 7J-6835 | [7] | BOLT-12 POINT HEAD | |
| 12. | 3G-4461 | [1] | SPACER | |
| 13. | 3G-6889 | [1] | CAP | |
| 14. | 7J-6839 | [1] | DRIVE-CONTROL END | |
| 15. | 3G-6891 | [2] | RACE | |
| 5L-1100 | [1] | BEARING-THRUST | ||
| 16. | 7F-8267 | [1] | SEAL-O-RING (47.2MM ID) | |
| 17. | 9J-5442 | [1] | RING | |
| 18. | 9J-8076 | [1] | BUSHING-TERMINAL | |
| 19. | 3G-6892 | [1] | BODY AS | |
| 20. | 7J-8010 | [6] | SPRING-CENTERING | |
| 21. | 7J-8009 | [1] | PIN | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 118-4341 | [1] | KIT-SEAL | ||
| 119-8116 | [1] | KIT-CONVERSION (BOLTS, SPACER AND CAP) | ||
#SEBP16400445
4T-7387: PUMP GP-METERING
4T7387 PUMP GP-METERING
PART OF 2V4283 CONTROL-STEERING
FIELD REPLACEMENT ORDER 1198765-PAGE 197.01.01 OR 6C0570-PAGE 197.01.02
PART OF 2V4283 CONTROL-STEERING
FIELD REPLACEMENT ORDER 1198765-PAGE 197.01.01 OR 6C0570-PAGE 197.01.02
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-1247 | [1] | BODY AS | |
| 2. | 7J-8010 | [6] | SPRING-CENTERING | |
| 3. | 7J-8009 | [1] | PIN | |
| 4. | 3G-6906 | [1] | SCREW | |
| 5. | 1H-1023 | [1] | SEAL-O-RING (9.25MM ID) | |
| 6. | 3G-6907 | [1] | SEAT | |
| 7. | 5F-9144 | [1] | SEAL-O-RING (7.65MM ID) | |
| 8. | 6S-7827 | [1] | BALL | |
| 9. | 6S-7826 | [1] | RETAINER-BALL | |
| 10. | 9J-5686 | [3] | SEAL-O-RING (72.75MM ID) | |
| 11. | 7J-6835 | [7] | BOLT-12 POINT HEAD (5/16-24X49.2MM OAL) | |
| 12. | 3G-4461 | [1] | SPACER | |
| 13. | 3G-6889 | [1] | CAP | |
| 14. | 8F-5340 | [1] | SEAL-LIP (25.4MM ID) | |
| 15. | 3G-6905 | [1] | SPACER | |
| 16. | 7J-6839 | [1] | DRIVE-CONTROL END | |
| 17. | 3G-6891 | [2] | RACE | |
| 18. | 5L-1100 | [1] | BEARING-THRUST | |
| 19. | 7F-8267 | [1] | SEAL-O-RING (47.2MM ID) | |
| 20. | 9J-5442 | [1] | RING-RETAINING | |
| 21. | 7J-6833 | [1] | SEAL | |
| 22. | 9J-8076 | [1] | BUSHING-TERMINAL | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 118-4341 | [1] | KIT-SEAL | ||
| 119-8116 | [1] | KIT-CONVERSION (BOLTS, SPACER, CAP ) | ||
#SEBP16400446
119-8765: PUMP GP-METERING
1198765 PUMP GP-METERING
FIELD REPLACEMENT FOR 4T7387-PAGE 197.01
FIELD REPLACEMENT FOR 4T7387-PAGE 197.01
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| NO SERVICED PARTS | ||||
#SEBP16400447
6C-0570: PUMP GP-METERING
6C0570 PUMP GP-METERING
FIELD REPLACEMENT FOR 4T7387-PAGE 197.01
FIELD REPLACEMENT FOR 4T7387-PAGE 197.01
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-0019 | [1] | PIN-ROLL | |
| 2. | 6C-0022 | [1] | BUSHING | |
| 3. | 6C-0018 | [1] | BOLT | |
| 4. | 6C-0023 | [1] | CAP | |
| 5. | 6C-0016 | [1] | SPACER | |
| 6. | 6C-0012 | [1] | DRIVE-CONTROL | |
| 7. | 6C-0017 | [6] | BOLT | |
| 8. | 6C-0020 | [7] | WASHER | |
| 9. | 6C-0024 | [1] | GEROTOR AS | |
| 10. | 6C-0011 | [1] | SPACER | |
| 11. | 6C-0014 | [1] | PIN | |
| 12. | 6C-0015 | [1] | BEARING | |
| 13. | 6C-0021 | [1] | BALL | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 6C-0025 C | [1] | KIT-SEAL | ||
| (INCLUDES SEALS | ||||
| AND SPRINGS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP16400448
6E-6406: PUMP GP-METERING
6E6406 PUMP GP-METERING
S/N 85X1547-UP
PART OF 2V4283 CONTROL-STEERING
FIELD REPLACEMENT FOR 3G7387-PAGE 197
FIELD REPLACEMENT ORDER 1198767-PAGE 0197.03
S/N 85X1547-UP
PART OF 2V4283 CONTROL-STEERING
FIELD REPLACEMENT FOR 3G7387-PAGE 197
FIELD REPLACEMENT ORDER 1198767-PAGE 0197.03
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6S-7827 | [1] | BALL | ||
| 5L-1100 | [1] | BEARING-THRUST | ||
| 7J-6835 | [7] | BOLT-12 POINT HEAD | ||
| 9J-8076 | [1] | BUSHING | ||
| 3G-6889 | [1] | CAP | ||
| 7J-6839 | [1] | DRIVE-CONTROL END | ||
| 9T-1083 | [1] | GEROTOR AS | ||
| 9T-8560 | [1] | KIT-SPRING | ||
| 118-4341 | [1] | KIT-SEAL | ||
| 119-8116 | [1] | KIT-CONVERSION | ||
| 7J-8009 | [1] | PIN | ||
| 3G-6891 | [2] | RACE | ||
| 6S-7826 | [1] | RETAINER-BALL | ||
| 9J-5442 | [1] | RING | ||
| 3G-6906 | [1] | SCREW | ||
| 7J-6833 | [1] | SEAL | ||
| 8F-5340 | [1] | SEAL-LIP TYPE | ||
| 1H-1023 | [1] | SEAL-O-RING | ||
| 7F-8267 | [1] | SEAL-O-RING | ||
| 9J-5686 | [3] | SEAL-O-RING | ||
| 5F-9144 | [1] | SEAL-O-RING | ||
| 3G-6907 | [1] | SEAT | ||
| 3G-4461 | [1] | SPACER | ||
| 3G-6905 | [1] | SPACER | ||
#SEBP16400449
119-8767: PUMP GP-METERING
1198767 PUMP GP-METERING
S/N 85X1547-UP
FIELD REPLACEMENT FOR 6E6406-PAGE 0197.02, 3G7387-PAGE 197
S/N 85X1547-UP
FIELD REPLACEMENT FOR 6E6406-PAGE 0197.02, 3G7387-PAGE 197
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-4461 | [1] | SPACER (0.24IN THK) | |
| 2. | 9J-5686 | [3] | SEAL-O-RING (72.75MM ID) | |
| 3. | 3G-6891 | [2] | RACE | |
| 4. | 5L-1100 | [1] | BEARING-THRUST | |
| 5. | 8F-5340 | [1] | SEAL-LIP (25.4MM ID) | |
| 6. | 7J-6833 | [1] | SEAL (1.034IN ID) | |
| 7. | 9J-8076 | [1] | BUSHING-TERMINAL | |
| 8. | 9J-5442 | [1] | RING-RETAINING (INTERNAL)(2.279IN OD) | |
| 9. | 7F-8267 | [1] | SEAL-O-RING (47.2MM ID) | |
| 10. | 7J-6839 | [1] | DRIVE-CONTROL END | |
| 11. | 114-5190 | [1] | SPACER (4.04MM THK) | |
| 12. | 114-5180 | [1] | CAP | |
| 13. | 6S-7826 | [1] | RETAINER-BALL | |
| 14. | 6S-7827 | [1] | BALL | |
| 15. | 5F-9144 | [1] | SEAL-O-RING (7.65MM ID) | |
| 16. | 3G-6907 | [1] | SEAT | |
| 17. | 1H-1023 | [1] | SEAL-O-RING (9.25MM ID) | |
| 18. | 3G-6906 | [1] | SCREW (9/16-18X0.559IN) | |
| 19. | 119-8086 | [7] | BOLT | |
| 20. | 7J-8009 | [1] | PIN (0.25 ODX1.62IN OAL) | |
| 21. | 9T-1083 | [1] | GEROTOR AS | |
| 118-4341 | [1] | KIT-SEAL | ||
| 9T-8560 | [1] | KIT-SPRING |
Information:
STEERING SYSTEM
STEERING COLUMN GP
Special Instruction
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
