AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W7416 GOVERNOR GP-PART 1 OF 2 TYPE 2 PART OF 7C7227 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP D9N


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO

TRACK-TYPE TRACTOR D9N TRACK-TYPE TRACTOR 1JD
 D9N TRACTOR 1JD00001-UP (MACHINE) POWERED BY 3408 ENGINE SEBP1642 D9N 1JD   (1987)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV, FUEL INJ & TFR
7C-7227 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-7227 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-7227 PUMP GP-GOV, FUEL INJ & TFR
GOVERNOR GP
4W-7416 GOVERNOR GP
GOVERNOR GP
4W-7416 GOVERNOR GP
GOVERNOR GP
4W-7416 GOVERNOR GP
GOVERNOR GP
4W-7416 GOVERNOR GP
PLATE GP-GOVERNOR ADAPTER
4W-7374 PLATE GP-GOVERNOR ADAPTER
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
PISTON GP-GOVERNOR SERVO
6N-1947 PISTON GP-GOVERNOR SERVO
 

#SEBP16420140
 

4W-7416: GOVERNOR GP

4W7416 GOVERNOR GP-PART 1 OF 2
TYPE 2
PART OF 7C7227 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP
c751497 SEBP1642
4W7416 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3363 [1] HOUSING AS-GOVERNOR  
2. 7E-8940 [1] BEARING-SLEEVE  
3. 8M-8403 [1] SPRING-GUIDE  
4. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
5. 7E-8941 [1] BEARING-SLEEVE  
6. 138-9507 [2] SEAL-LIP TYPE  
7. 8L-4308 [1] BOLT  
8. 9M-1974 [5] WASHER-HARD  
9. 2B-2695 [1] BOLT  
10. 2P-8707 [1] PLATE AS-GOVERNOR  
11. 8L-4175 [1] DOWEL  
12. 0S-1594 [1] BOLT  
13. 1D-4540 [3] BOLT  
14. 1N-4656 [1] SHAFT-GOVERNOR CONTROL  
15. 9N-1917 [1] COVER AS-GOVERNOR  
16. 3P-0009 [1] INSULATOR-STUD  
17. 9N-1916 [1] LEVER-SHUTOFF  
18. 5M-6228 [1] BEARING-NEEDLE  
19. 031-0215 [4] BOLT-LOCKING  
20. 9N-2165 [1] LEVER-SOLENOID  
21. 1S-7984 [1] BEARING-SLEEVE  
22. 1K-4703 [1] WASHER  
23. 5P-0796 [2] SEAL-LIP  
24. 4N-0951 [1] SHAFT-SHUTOFF  
25. 8H-9204 [1] WASHER-FELT  
26. 8N-3154 [1] SCREW AS-ADJUSTMENT (LOW-IDLE)  
27. 2J-0157 [1] SEAL-O-RING  
28. 9N-3324 [1] SCREW-ADJUSTMENT (HI-IDLE)  
 

#SEBP16420141
 

4W-7416: GOVERNOR GP

4W7416 GOVERNOR GP-PART 2 OF 2
TYPE 2
4W7374-PAGE 82
PART OF 7C7227 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP
c751510 SEBP1642
4W7416 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
29. 5L-8992 [1] COVER-ADJUSTMENT  
30. 5P-6945 [1] BOLT  
  4B-9747 [1] WASHER  
31. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
32. 6N-8793 [1] SPRING  
33. 4W-7374 Y [1] PLATE GP-GOVERNOR ADAPTER  
34. 7C-5279 C [1] COVER  
35. 4B-9365 C [2] BOLT  
  1B-4330 [2] NUT  
  5P-0537 [4] WASHER  
36. 8L-3873 C [2] GASKET  
37. 2P-8669 [1] GASKET  
38. 2W-1491 [1] LEVER-CONTROL  
39. 1B-4201 [1] NUT-FULL  
40. 8L-4155 [1] SETSCREW  
41. 9M-4704 [1] BOLT  
42. 2P-8679 [1] STRAINER AS  
43. 2P-8697 [1] GASKET  
44. 8L-4154 [1] COLLAR-LOAD STOP  
45. 4N-1870 [1] GASKET-HOUSING  
46. 8H-9181 [1] SPRING-BUMPER  
47. 6N-3504 [2] SEAT-GOVERNOR SPRING  
48. 1B-9575 [1] BOLT  
49. 6N-9040 [1] DRIVE AS-FLEXIBLE  
50. 2W-9780 [1] PIN AS  
51. 6N-0265 [1] DOWEL  
52. 6N-8780 [1] STOP  
53. 5L-8991 [1] GASKET-COVER  
54. 5H-1351 [1] PIN-SPRING  
55. 4W-7654 [1] BOLT  
56. 9S-4182 [2] PLUG  
  3J-7354 [2] SEAL-O-RING  
57. 7M-7316 [1] SPRING  
58. 9M-9788 [1] PLUNGER-STOP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420142
 

4W-7374: PLATE GP-GOVERNOR ADAPTER

4W7374 PLATE GP-GOVERNOR ADAPTER
6N1947-PAGE 89
PART OF 4W7416 GOVERNOR
c350858 SEBP1642
4W7374 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 1W-4642 [1] RISER-GOVERNOR  
3. 1W-4640 [1] SEAT-SPRING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-BEARING-THRUST  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] RING-LOCK  
8. 6N-7818 [1] LOCK-RING  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
11. 4W-2169 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BEARING-SLEEVE  
15. 6N-8195 [1] RACE-THRUST  
16. 4W-7653 [1] BOLT-GROUND BODY  
17. 6N-1947 Y [1] PISTON GP-GOVERNOR SERVO  
18. 2S-0007 [1] SLEEVE-PILOT  
19. 9M-6302 [2] WASHER  
  9M-6303 [1] SPRING  
20. 7N-2351 [1] PIN-CONTROL  
21. 034-4160 [2] BOLT-SELF LOCKING  
22. 8M-6393 [1] RING-RETAINING  
23. 6N-8783 [1] GEAR (42 TEETH)  
24. 9L-6509 [1] WEIGHT AS-GOVERNOR  
25. 1S-5440 [2] DOWEL  
26. 9L-4989 [2] WEIGHT-GOVERNOR  
27. 9N-3323 [1] BRACKET AS-CONTROL (RACK)  
28. 2S-7316 C [1] DOWEL  
29. 7W-7129 C [1] LEVER-RACK  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420143
 

9N-3739: TORQUE CONTROL GP

9N3739 CONTROL GP-TORQUE
ENGINE S/N 48W24254-UP
PART OF 7C7227 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP
c167904 SEBP1642
9N3739 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4218 [1] CONTACT  
2. 4F-7957 [2] BOLT  
3. 9M-6292 [1] LOCK-NUT  
4. 3S-0602 [1] RETAINER-SPRING  
5. 9L-5176 [1] SPRING-TORQUE .6096MM(.024IN)THICK  
6. 2S-7391 [1] BAR-STOP 2.997MM(.118IN)THICK  
7. 1P-9958 [1] INSULATOR  
8. 7N-1795 [1] SPACER .3556MM(.014IN)THICK  
9. 1P-6452 [1] INSULATOR  
10. 8M-9062 [1] RETAINER-SPRING  
11. 4N-7777 [1] SPACER .2540MM(.010IN)THICK  
 

#SEBP16420144
 

9N-3724: TORQUE CONTROL GP

9N3724 CONTROL GP-TORQUE
ENGINE S/N 48W23086-24253
PART OF 7C7227 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP
c223027 SEBP1642
9N3724 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4218 [1] CONTACT  
2. 4F-7957 [2] BOLT  
3. 9M-6292 [1] LOCK-NUT  
4. 3S-0602 [1] RETAINER-SPRING  
5. 9L-5176 [1] SPRING-TORQUE .6096MM(.024IN)THICK  
6. 2S-7391 [1] BAR-STOP 2.997MM(.118IN)THICK  
7. 1P-9958 [1] INSULATOR  
8. 9L-3626 [1] SPACER .406MM(.016IN)THICK  
9. 1P-6452 [1] INSULATOR  
10. 8M-9062 [1] RETAINER-SPRING  
11. 9L-9347 [1] SHIM-TORQUE SPRING .51MM(.020IN)THICK  
 

#SEBP16420145
 

6T-6360: CONTROL GP-GOVERNOR

6T6360 CONTROL GP-GOVERNOR-PART 1 OF 2
9N1822-PAGE 86
c747937 SEBP1642
6T6360 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-3737 [1] HOUSING  
2. 3T-0371 [1] PLATE  
3. 2A-1736 [1] HANDLE (GEARSHIFT LEVER)  
4. 7G-7653 [1] LEVER  
5. 1B-8706 [1] KEY-WOODRUFF  
6. 8T-9375 C [1] BOLT  
7. 6V-8801 C [3] NUT  
8. 5L-4041 C [4] BOLT-12 POINT HEAD  
9. 4B-3609 [4] SETSCREW-SQUARE HEAD  
10. 9G-0772 [1] PEDAL  
11. 9B-7237 [5] BOLT  
12. 031-0215 [2] BOLT-LOCKING  
  9G-4512 [1] BRACKET  
13. 7G-8858 [1] ROD AS  
14. 8M-1019 [1] SPRING  
15. 4D-4064 [2] ROD END  
16. 9P-2388 [1] LEVER  
17. 1B-8704 C [2] KEY-WOODRUFF  
18. 4L-9337 C [2] BOLT  
19. 5P-1885 [2] BEARING-ROLLER  
20. 6T-6358 [1] SHAFT-GOVERNOR CONTROL  
  1K-0502 [1] WASHER  
21. 7X-0860 C [1] BOLT  
22. 2K-4973 C [2] LOCKNUT  
23. 4M-0061 [2] BOLT  
  031-4155 [2] LOCKNUT  
24. 6T-6357 [1] ROD  
25. 6V-8183 [3] NUT-FULL  
26. 5D-6857 C [1] LEVER  
27. 5P-1075 [7] WASHER-HARD  
28. 9W-2611 C [1] BRACKET  
29. 4B-6493 [1] SPRING-ROD  
30. 1B-0676 [1] PIN  
  3B-4615 [1] PIN-COTTER  
31. 1B-2578 C [7] NUT  
32. 8T-2502 [3] BOLT  
33. 7X-2501 [1] BOLT  
34. 9N-1822 Y [1] CONTROL GP-GOVERNOR  
35. 091-1745 C [2] WASHER  
36. 7V-9799 C [1] PIN  
  3B-4610 [1] PIN-COTTER  
37. 1A-9252 [1] END-ADJUSTMENT ROD  
38. 7F-0192 C [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420146
 

6T-6360: CONTROL GP-GOVERNOR

6T6360 CONTROL GP-GOVERNOR-PART 2 OF 2
c747938 SEBP1642
6T6360 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
39. 1F-4166 [2] WASHER  
40. 2J-6356 [1] RING-RETAINING  
41. 7G-7682 [1] SHAFT-GOVERNOR CONTROL  
42. 6V-7634 [1] BOLT-LOCKING  
  6D-3886 [1] BALL BEARING  
43. 1B-8704 C [1] KEY-WOODRUFF  
44. 7G-7655 [1] SHAFT AS  
45. 6P-0593 [1] BEARING-ROLLER  
46. 9G-1913 [1] PLATE  
  7M-6955 [2] GASKET  
47. 6D-5974 [1] BEARING-ROLLER  
48. 7G-7681 [1] SHAFT AS  
  2S-6091 [3] DOWEL  
49. 9W-3551 C [1] COVER  
50. 3W-4104 C [1] SPRING-DISC  
51. 1B-8706 [1] KEY-WOODRUFF  
52. 8H-9180 [1] SEAL-LIP  
53. 8T-2502 [2] BOLT  
54. 9W-4657 C [1] LEVER  
55. 7G-7684 [1] LEVER  
56. 8H-9182 [2] ROLLER-GOVERNOR CONTROL  
57. 8H-9186 [2] SPRING  
58. 5H-7152 [1] SPRING  
59. 6Y-0145 [1] PLATE-LOCKING  
  8T-5353 [1] DOWEL  
60. 7P-4190 [2] BEARING-ROLLER  
61. 4F-7508 C [1] WASHER  
62. 3W-3828 C [1] HOUSING  
63. 091-9915 C [1] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16420147
 

6N-6209: CONTROL GP-FUEL RATIO

6N6209 CONTROL GP-FUEL RATIO
ENGINE S/N 48W23086-27647
2W3157-PAGE 87
c718554 SEBP1642
6N6209 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-3169 I [1] HOSE AS 60.96CM(24IN.)  
2. 9L-5125 [1] ELBOW (FLARED)  
3. 4N-8112 [2] BOLT  
  8F-7242 [2] WASHER  
  3B-4505 [2] LOCKWASHER (.097IN THK)  
4. 2P-8643 [1] GASKET  
5. 2W-3157 CYR [1] CONTROL GP-FUEL RATIO  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420148
 

9N-1822: CONTROL GP-GOVERNOR

9N1822 CONTROL GP-GOVERNOR
PART OF 6T6360 CONTROL-GOVERNOR
c555347 SEBP1642
9N1822 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-7803 [1] RING-RETAINING  
2. 6I-1936 [1] SPRING  
3. 9N-3735 [1] LEVER  
4. 9N-3736 [1] LEVER  
 

#SEBP16420149
 

8N-5021: CONTROL GP-FUEL RATIO

8N5021 CONTROL GP-FUEL RATIO
ENGINE S/N 48W27648-UP
2W3157-PAGE 87
c603663 SEBP1642
8N5021 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-1287 [1] ELBOW-FLARED  
2. 4N-8112 [2] BOLT  
  8F-7242 [2] WASHER  
3. 6N-3169 CI [1] HOSE AS .61M(24IN)  
4. 3B-4505 [2] LOCKWASHER  
5. 2H-5547 C [1] BUSHING-REDUCER  
6. 2P-8643 [1] GASKET  
7. 2W-3157 YR [1] CONTROL GP-FUEL RATIO  
8. 124-0174 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel System Identification
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive (Fixed Timing Unit)
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit)
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Fuel Transfer Pump
3408 VEHICULAR ENGINE
Fuel Rack Travel
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE
Governor
3408 VEHICULAR ENGINE
Governor Shutoff Solenoid
3408 VEHICULAR ENGINE
Governor Control Cylinder
3408 VEHICULAR ENGINE
Governor And Decelerator Group
D9N TRACTOR VEHICLE SYSTEMS
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Governor Weight And Race Kit For Severe Applications{1286}
1996/06/03

Caterpillar Parts SIS Catalog D9N :

GOVERNOR GP
4W-7416 GOVERNOR GP
GOVERNOR GP
4W-7416 GOVERNOR GP
HOUSING AS-FUEL PUMP
7N-4574 HOUSING AS-FUEL PUMP
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
8N-1630 PUMP GP-FUEL TRANSFER
GOVERNOR GP
4W-7416 GOVERNOR GP
PLATE GP-GOVERNOR ADAPTER
4W-7374 PLATE GP-GOVERNOR ADAPTER
TORQUE CONTROL GP
9N-3739 TORQUE CONTROL GP
TORQUE CONTROL GP
9N-3724 TORQUE CONTROL GP
CONTROL GP-GOVERNOR
6T-6360 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6T-6360 CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
6N-6209 CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
9N-1822 CONTROL GP-GOVERNOR

Truck sale:

Caterpillar D9N, Construction
149,444 USD 
Caterpillar D9N, Construction
- Dozers
FINNING CANADA
Canada
Caterpillar D9N, Construction
59,900 
Caterpillar D9N, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D9N 1990
 
CATERPILLAR D9N 1990
- TRACK TYPE TRACTORS
LOUISIANA CAT
Louisiana United States
CATERPILLAR D9N 1992
 
CATERPILLAR D9N 1992
- TRACK TYPE TRACTORS
TRACTORS INDIA PVT LIMITED [TIPL]
CATERPILLAR D9N 1989
 
CATERPILLAR D9N 1989
- TRACK TYPE TRACTORS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.