AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6Y3938 LINES GP-RIPPER-ADJUSTABLE-PART 2 OF 2 S/N 1JD638-UP PART OF 6Y4178 CONTROL AR-HYDRAULIC AN ATTACHMENT D9N


HYDRAULIC SYSTEM
LINES GP-RIPPER
LINES GP-CYLINDER
PUMP GP
LINES GP-HYDRAULIC
LINES GP-CYLINDER
LINES GP-PUMP

TRACK-TYPE TRACTOR D9N TRACK-TYPE TRACTOR 1JD
 D9N TRACTOR 1JD00001-UP (MACHINE) POWERED BY 3408 ENGINE SEBP1642 D9N 1JD   (1987)

HYDRAULIC SYSTEM

LINES GP-RIPPER
LINES GP-RIPPER
4T-8861 LINES GP-RIPPER
LINES GP-RIPPER
4T-8861 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
6Y-3938 LINES GP-RIPPER
LINES GP-RIPPER
6Y-3938 LINES GP-RIPPER
 

#SEBP16420470
 

6Y-3938: LINES GP-RIPPER

6Y3938 LINES GP-RIPPER-ADJUSTABLE-PART 2 OF 2
S/N 1JD638-UP
PART OF 6Y4178 CONTROL AR-HYDRAULIC
AN ATTACHMENT
c747889 SEBP1642
6Y3938 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
14. 6V-8724 [3] ELBOW (90 DEGREE-9/16-18THD)  
15. 3J-1907 [10] SEAL-O-RING (11.89MM ID)  
16. 6V-8397 [11] SEAL-O-RING (9.27MM ID)  
17. 5P-6944 [4] ADAPTER-STRAIGHT THREAD  
18. 6V-8636 [5] CONNECTOR  
19. 3K-0360 [4] SEAL-O-RING (16.36MM ID)  
20. 4J-0522 [4] SEAL-O-RING (37.69MM ID)  
21. 3T-4817 [1] CLAMP  
22. 3T-4820 [1] PLATE  
23. 6Y-4117 I [1] HOSE AS  
24. 6T-9134 [1] BRACKET AS  
25. 8F-9836 [1] LUG (3/8-16 THD)  
26. 3G-8054 [1] CLIP (TAB)  
  3G-8057 [1] CLIP (SLOT)  
  6V-0974 [1] GROMMET  
27. 5P-7462 [1] CLIP (SLOT)  
  5P-7463 [1] CLIP (TAB)  
  6V-0683 [1] GROMMET (19MM ID)  
28. 9B-7237 [3] BOLT (3/8-16X1.25IN)  
29. 8T-4896 [2] WASHER-HARD (2.5MM THK)  
30. 4L-6454 [1] BOLT (3/8-16 X 1.0IN)  
31. 6Y-1169 [1] GUARD AS  
32. 5P-1076 [2] WASHER-HARD (4MM THK)  
33. 7X-0326 [2] BOLT (1/2-13X3IN)  
34. 6Y-3937 [1] BRACKET AS  
35. 2J-3118 [2] BOLT-LOCKING  
36. 6V-9001 [2] ELBOW-45 DEGREE (45 DEGREE-9/16-18THD)  
37. 5P-1075 [4] WASHER-HARD (3MM THK)  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16420471
 

9W-1756: LINES GP-TILT CYLINDER

9W1756 LINES GP-TILT CYLINDER
S/N 1JD2857-UP
c531088 SEBP1642
9W1756 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9047 I [1] HOSE AS  
2. 8E-9048 I [1] HOSE AS  
3. 9D-1829 [2] CLIP  
4. 8T-4896 [4] WASHER-HARD  
5. 4L-6454 [2] BOLT  
6. 1D-4717 [1] NUT  
7. 6Y-0634 [1] BRACKET  
8. 4J-5267 [2] SEAL  
9. 4J-0520 [2] SEAL  
10. 7X-0288 [1] BOLT  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16420472
 

9W-1756: LINES GP-TILT CYLINDER

9W1756 LINES GP-TILT CYLINDER
S/N 1JD1-2856
c499708 SEBP1642
9W1756 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-5429 I [1] HOSE AS  
2. 9W-5431 I [1] HOSE AS  
3. 9D-1829 [1] CLIP  
4. 8T-4896 [3] WASHER-HARD  
5. 4L-6454 [1] BOLT  
6. 1D-4717 [1] NUT  
7. 6Y-0634 [1] BRACKET  
8. 4J-5267 [2] SEAL  
9. 4J-0520 [2] SEAL  
10. 7X-0288 [1] BOLT  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16420473
 

7T-5390: LINES GP-TILT CYLINDER

7T5390 LINES GP-TILT CYLINDER
BULLDOZER S/N 1LH1-UP,1MH1-UP
PART OF 7T5381, 7T5392, 9W2924, 9W2925 BULLDOZER ARS
AN ATTACHMENT
c480762 SEBP1642
7T5390 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7235 [13] SEAL  
2. 1P-4576 [20] FLANGE  
3. 5S-7382 [40] BOLT  
4. 8T-4896 [44] WASHER-HARD  
5. 3G-7168 [2] GUARD  
6. 8T-8917 [9] BOLT  
7. 8T-4223 [9] WASHER  
8. 3G-7172 [2] PLATE-COVER  
9. 7X-0362 CL [4] BOLT  
10. 8T-4122 [8] WASHER  
11. 7X-0448 [4] NUT  
12. 4T-5336 [1] GUARD AS  
13. 8T-2501 [4] BOLT  
14. 4T-5338 [1] TUBE AS  
15. 3G-7452 C [1] HOSE AS  
16. 7X-0379 [4] BOLT  
17. 8C-6913 [4] WASHER-HARD  
18. 1U-3557 [1] HOSE AS  
19. 1U-3558 [1] HOSE AS  
20. 3G-7451 [2] HOSE AS  
21. 9W-9970 C [1] HOSE AS  
   
    L-ASSEMBLE BOLTS TOWARD
    TRACTOR ON TRACTOR END
    AND TOWARD BLADE ON
    BLADE END
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16420474
 

9W-0722: LINES GP-LIFT CYLINDER

9W0722 LINES GP-LIFT CYLINDER
S/N 1JD1-2856
c499909 SEBP1642
9W0722 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-5428 I [1] HOSE AS  
2. 5P-2424 [3] BOLT  
3. 9W-0721 [1] JUNCTION BLOCK  
4. 4J-0522 [4] SEAL  
5. 9W-5430 [1] HOSE AS  
6. 8T-8916 [8] BOLT  
  8T-5360 [8] WASHER  
7. 1P-4578 [4] FLANGE  
8. 7G-5606 [2] PLATE  
9. 9W-0512 [4] GROMMET  
10. 5P-2228 [8] BOLT  
11. 8T-4223 [21] WASHER  
12. 7G-0204 I [2] HOSE AS  
13. 7X-0325 [2] BOLT  
14. 5P-7466 [4] CLIP (SLOT)  
  5P-7467 [4] CLIP (TAB)  
15. 5P-8112 [4] GROMMET  
16. 6V-8188 [5] NUT  
17. 7G-0205 I [2] HOSE AS  
18. 9G-8929 [1] MANIFOLD  
19. 9G-8928 [1] MANIFOLD  
20. 1P-4576 [32] FLANGE  
21. 9W-0723 [1] JUNCTION BLOCK  
22. 5S-7382 [64] BOLT  
23. 4J-5267 [14] SEAL  
24. 7X-0331 [4] BOLT  
25. 8T-4835 [2] BOLT  
26. 5H-4018 [6] COVER  
27. 7G-3413 C [1] CLIP (SLOT)  
  7G-3414 C [1] CLIP (TAB)  
  7G-3415 C [1] GROMMET  
28. 8T-4896 [64] WASHER-HARD  
29. 8T-8917 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16420475
 

9W-0722: LINES GP-LIFT CYLINDER

9W0722 LINES GP-LIFT CYLINDER
S/N 1JD2857-UP
c570206 SEBP1642
9W0722 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1497 IC [1] HOSE AS  
2. 5P-2424 [3] BOLT  
3. 9W-0721 [1] JUNCTION BLOCK  
4. 4J-0522 [4] SEAL  
5. 8E-9049 IC [1] HOSE AS  
6. 8T-8916 [8] BOLT  
  8T-5360 [8] WASHER  
7. 1P-4578 [4] FLANGE  
8. 7G-5606 [2] PLATE  
9. 9W-0512 [4] GROMMET  
10. 5P-2228 [8] BOLT  
11. 8T-4223 [21] WASHER-HARD  
12. 7G-0204 I [2] HOSE AS  
13. 7X-0325 [2] BOLT  
14. 5P-7466 [4] CLIP (SLOT)  
  5P-7467 [4] CLIP (TAB)  
15. 5P-8112 [4] GROMMET  
16. 6V-8188 [5] NUT  
17. 7G-0205 I [2] HOSE AS  
18. 9G-8929 [1] MANIFOLD  
19. 9G-8928 [1] MANIFOLD  
20. 1P-4576 [32] FLANGE  
21. 9W-0723 [1] JUNCTION BLOCK  
22. 5S-7382 [64] BOLT  
23. 4J-5267 [14] SEAL  
24. 7X-0331 [4] BOLT  
25. 8T-4835 [2] BOLT  
26. 5H-4018 [6] COVER  
27. 7G-3413 [1] CLIP (SLOT)  
  7G-3414 [1] CLIP (TAB)  
  7G-3415 [1] GROMMET  
28. 8T-4896 [64] WASHER-HARD  
29. 8T-8917 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16420476
 

9T-9839: PUMP GP-GEAR

9T9839 PUMP GP-GEAR
PART OF 6Y9595 PUMP & LINES AR
AN ATTACHMENT
c485056 SEBP1642
9T9839 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4923 [8] STUD  
  5P-7213 [8] WASHER-HARD  
  8H-5724 [8] NUT  
2. 6V-1899 J [2] SEAL-LIP TYPE  
  008-3214 [1] RING-RETAINING  
3. 3G-7242 [1] PLUG  
   
  5S-1522 F [1] RING-SNAP  
  7J-4772 F [1] COUPLING-SPLINE  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  [1] KIT-FRONT SECTION  
  6E-1819 [1] KIT-REAR SECTION  
  6E-1820 [1] KIT-SEAL  
    (INCLS PARTS MARKED J)
  F   NOT SHOWN
 

#SEBP16420477
 

6Y-9595: PUMP & LINES AR

6Y9595 PUMP & LINES AR
IMPLEMENT HYDRAULIC (GEAR)
AN ATTACHMENT
SEBP16420477 SEBP1642
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  6Y-8143 Y [1] LINES GP-PUMP  
   
  9T-9839 Y [1] PUMP GP-GEAR  
   
  7E-2721 [1] ADAPTER AS  
  1T-0550 [2] PIN SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420478
 

9W-5964: LINES GP-LIFT CYLINDER

9W5964 LINES GP-LIFT CYLINDER
BULLDOZER S/N 1LH1-UP,1MH1-UP
9W1282-PAGE 122
PART OF 7T5381, 7T5392 BULLDOZER ARS
AN ATTACHMENT
c492123 SEBP1642
9W5964 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-9821 [2] BRACKET  
2. 1P-4577 [8] FLANGE-HALF  
3. 4J-0520 [4] SEAL  
4. 5S-7382 [16] BOLT  
5. 8T-4896 [34] WASHER-HARD  
6. 5C-6565 [8] BOLT  
7. 8T-4223 [12] WASHER  
8. 9W-6379 [1] GUARD AS  
  3T-5287 [1] GUARD  
9. 9W-6380 [1] GUARD AS  
  3T-5286 [1] GUARD  
10. 9W-1282 CY [2] LAMP GP-HEAD  
11. 7K-1181 C [2] STRAP-CABLE  
12. 9W-6328 [2] TUBE  
13. 7G-0207 I [2] HOSE AS  
14. 7G-0202 [2] HOSE AS  
15. 4J-5267 [4] SEAL  
16. 2B-8352 [4] WASHER  
17. 8T-4122 [2] WASHER  
18. 6V-8181 [2] NUT-FULL  
19. 9W-4361 [8] MOUNT  
20. 6V-8801 [18] NUT  
21. 5F-7055 [4] CLIP  
22. 5P-2228 [4] BOLT  
23. 5P-8522 [2] GROMMET  
24. 6T-6112 [2] HARNESS AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420479
 

9W-1757: LINES GP-PUMP

9W1757 LINES GP-PUMP-PART 1 OF 2
S/N 1JD1-1114
3G9895-PAGE 245
c411837 SEBP1642
9W1757 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-9895 Y [1] VALVE GP-RELIEF  
  3D-2824 [1] SEAL-O-RING  
2. 6V-8724 [2] ELBOW  
3. 3J-1907 C [7] SEAL 11.89MM(.468IN.)I.D.  
4. 6V-8636 [2] CONNECTOR  
5. 8T-7213 [1] SEAL  
6. 7T-0632 [1] HOSE AS  
7. 6V-8397 [12] SEAL-O-RING  
8. 1A-1135 [3] BOLT  
9. 5P-8247 [13] WASHER-HARD  
10. 6V-9001 [1] ELBOW  
  5P-1404 [1] ADAPTER-O-RING  
  2M-9780 [1] SEAL-O-RING 19.18MM(.755IN.)I.D.  
11. 5R-0939 [3] CLIP (TAB)  
  5R-0940 [3] CLIP (SLOT)  
12. 0S-1585 [5] BOLT  
13. 5P-8245 [15] WASHER (SMALL)  
14. 6H-1717 [3] BOLT  
15. 1S-1015 C [1] CLIP  
16. 0S-1620 [1] BOLT  
17. 7T-0631 [1] HOSE AS  
18. 7G-5603 [1] HOSE AS  
19. 0T-0772 [4] BOLT  
  5P-8244 [4] WASHER  
20. 1P-4577 [6] FLANGE-HALF  
21. 1P-4578 [2] FLANGE  
  8T-7212 [1] SEAL  
22. 5M-2894 [17] WASHER  
23. 3B-1915 C [8] BOLT  
24. 9W-5285 [1] HOSE AS  
25. 9W-5286 [1] HOSE AS  
26. 7G-3833 [2] CLIP (TAB)  
  7G-3834 [2] CLIP (SLOT)  
  7G-3832 [2] GROMMET  
  1A-2029 [4] BOLT  
27. 8T-7130 [1] SEAL-FACE  
28. 0S-1589 [6] BOLT  
29. 8T-7174 [1] SEAL-FACE  
30. 1P-4585 [2] FLANGE-HALF  
31. 7T-0624 [1] HOSE AS  
32. 7G-5604 [1] HOSE AS  
33. 7T-0626 [1] HOSE AS  
34. 9P-9694 [1] BRACKET  
35. 9G-0162 [2] MOUNTING  
  2B-0947 [2] BOLT  
  8F-6437 [2] WASHER (LARGE)  
  1D-4719 [2] NUT  
36. 9G-7943 [1] PLATE-ORIFICE  
37. 7T-0633 [1] MANIFOLD  
38. 1P-4579 [2] FLANGE-HALF  
  8T-7214 [1] SEAL  
39. 0S-1591 [1] BOLT  
40. 7T-0628 [1] HOSE AS  
41. 0S-1587 [4] BOLT  
42. 1P-4584 [2] FLANGE-HALF  
  8T-7232 [1] SEAL-FACE  
43. 7T-0630 [1] HOSE AS  
44. 9W-4589 [1] HOSE AS  
45. 6V-8781 [1] TEE-FACE SEAL  
46. 7T-0634 [1] MANIFOLD  
47. 8T-7173 [1] SEAL-FACE  
48. 1D-4588 [4] BOLT  
   
   
   
49. 8C-3451 C [1] CAP-DUST  
  8C-3446 C [1] VALVE-SAMPLING  
  5P-9617 C [1] ADAPTER (HEX)  
  3J-7354 C [1] SEAL-O-RING  
    8.92MM(.351IN)I.D.
  9J-3866 C [1] ADAPTER  
50. 0L-1143 C [4] BOLT  
51. 8T-7211 C [5] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Disassembly and Assembly
Ripper Lift Cylinder
D9N TRACTOR VEHICLE SYSTEMS
Service Magazine
Different Tilt Cylinder Hose Connections Used With New Ripper Control Valve{5356,5057,5351}
1989/11/13

Caterpillar Parts SIS Catalog D9N :

LINES GP-RIPPER
6Y-3938 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
9W-5109 LINES GP-RIPPER
LINES GP-RIPPER
4T-8861 LINES GP-RIPPER
LINES GP-RIPPER
4T-8861 LINES GP-RIPPER
LINES GP-CYLINDER
4T-8853 LINES GP-CYLINDER
LINES GP-TILT CYLINDER
9W-1756 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9W-1756 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
7T-5390 LINES GP-TILT CYLINDER
LINES GP-LIFT CYLINDER
9W-0722 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
9W-0722 LINES GP-LIFT CYLINDER
PUMP GP-GEAR
9T-9839 PUMP GP-GEAR
6Y-9595 PUMP & LINES AR
LINES GP-LIFT CYLINDER
9W-5964 LINES GP-LIFT CYLINDER

Truck sale:

Caterpillar D9N, Construction
149,444 USD 
Caterpillar D9N, Construction
- Dozers
FINNING CANADA
Canada
Caterpillar D9N, Construction
59,900 
Caterpillar D9N, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D9N 1990
 
CATERPILLAR D9N 1990
- TRACK TYPE TRACTORS
LOUISIANA CAT
Louisiana United States
CATERPILLAR D9N 1992
 
CATERPILLAR D9N 1992
- TRACK TYPE TRACTORS
TRACTORS INDIA PVT LIMITED [TIPL]
CATERPILLAR D9N 1989
 
CATERPILLAR D9N 1989
- TRACK TYPE TRACTORS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.