AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T0106 CYLINDER GP-RIPPER TILT-(CHGS 00-04) 165.1 MM (6.5 IN.) BORE X 457.1 MM (18 IN.) STROKE TYPE 1. RIPPER S/N 1NH1-UP,1PH1-UP PART OF 4T8859, 4T8865 RIPPER ARS AN ATTACHMENT D9N


HYDRAULIC SYSTEM
CYLINDER GP
VALVE & CYLINDER GP
CYLINDER GP
VALVE GP
VALVE GP-PILOT

TRACK-TYPE TRACTOR D9N TRACK-TYPE TRACTOR 1JD
 D9N TRACTOR 1JD00001-UP (MACHINE) POWERED BY 3408 ENGINE SEBP1642 D9N 1JD   (1987)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-RIPPER PIN PULLER
9T-2066 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-RIPPER TILT
9T-0106 CYLINDER GP-RIPPER TILT
CYLINDER GP-RIPPER TILT
9T-0106 CYLINDER GP-RIPPER TILT
CYLINDER GP-RIPPER
3G-6457 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
3G-6457 CYLINDER GP-RIPPER
 

#SEBP16420490
 

9T-0106: CYLINDER GP-RIPPER TILT

9T0106 CYLINDER GP-RIPPER TILT-(CHGS 00-04)
165.1 MM (6.5 IN.) BORE X 457.1 MM (18 IN.) STROKE
TYPE 1. RIPPER S/N 1NH1-UP,1PH1-UP
PART OF 4T8859, 4T8865 RIPPER ARS
AN ATTACHMENT
c531212 SEBP1642
9T0106 CYLINDER GP-RIPPER TILT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE  
2. 2J-0564 [1] NUT-SELF LOCKING  
3. 9T-0105 R [1] CYLINDER AS  
  3G-5999 [1] BEARING-SLEEVE  
4. 2K-4473 [1] RING-BACK-UP  
5. 2K-4472 [1] SEAL-O-RING  
6. 5J-8300 [1] SEAL-U-CUP  
7. 9T-0098 R [1] ROD AS  
  3G-5999 [1] BEARING-SLEEVE  
8. 8C-5218 [1] SEAL-LIP TYPE  
9. 1D-4709 [4] BOLT  
  5P-8250 [4] WASHER  
10. 9T-0095 [1] HEAD  
11. 8C-9126 [1] SEAL AS  
12. 9T-0094 [1] RING-WEAR  
13. 6J-9747 [1] WASHER  
14. 5J-4991 [1] SEAL AS  
15. 9T-0096 [1] RING-WEAR  
16. 6J-9748 [1] PISTON  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16420491
 

9T-0106: CYLINDER GP-RIPPER TILT

9T0106 CYLINDER GP-RIPPER TILT-(CHG 05,06)
165.1 MM (6.5 IN.) BORE X 457.1 MM (18 IN.) STROKE
TYPE 2. RIPPER S/N 1NH1-UP,1PH1-UP
PART OF 4T8859, 4T8865 RIPPER ARS
AN ATTACHMENT
c579430 SEBP1642
9T0106 CYLINDER GP-RIPPER TILT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE  
2. 2J-0564 [1] NUT-SELF LOCKING  
3. 9T-0105 R [1] CYLINDER AS  
  3G-5999 [1] BEARING-SLEEVE  
4. 7J-8955 [1] RING-BACK-UP  
5. 7J-8956 [1] SEAL-O-RING  
6. 5J-8300 [1] SEAL-U-CUP  
7. 9T-0098 R [1] ROD AS  
  3G-5999 [1] BEARING-SLEEVE  
8. 8C-5218 [1] SEAL-LIP TYPE  
9. 1D-4709 [4] BOLT  
  5P-8250 [4] WASHER  
10. 6E-5527 [1] HEAD  
11. 8C-9126 [1] SEAL AS  
12. 9T-0094 [1] RING-WEAR  
13. 6J-9747 [1] WASHER  
14. 5J-4991 [1] SEAL AS  
15. 9T-0096 [1] RING-WEAR  
16. 6J-9748 [1] PISTON  
17. 8T-8379 [1] SEAL-HEAD  
18. 1P-4576 [4] FLANGE  
19. 5S-7382 [8] BOLT (3/8-16X1.375IN)  
20. 5H-4019 [2] COVER  
21. 4J-0520 [2] SEAL (32.92MM ID)  
22. 8T-4896 [8] WASHER-HARD (2.5MM THK)  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16420492
 

3G-6457: CYLINDER GP-RIPPER

3G6457 CYLINDER GP-RIPPER-(CHGS 04-07)
210MM (8.3IN) BORE X 457MM (18IN) STROKE
TYPE 1. RIPPER S/N 1NH1-UP,1PH1-UP
PART OF 4T8859, 4T8865 RIPPER ARS
AN ATTACHMENT
c530630 SEBP1642
3G6457 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE  
2. 7J-1965 [2] WASHER  
3. 5J-5559 [1] SEAL AS  
4. 1J-2176 [1] SEAL-O-RING  
5. 2J-0744 [1] RING-BACK-UP  
6. 1D-4630 C [2] BOLT  
7. 5P-8249 [8] WASHER  
8. 3G-6827 R [1] ROD AS-PISTON  
9. 3G-5999 [1] BEARING-SLEEVE  
10. 8T-8389 [1] SEAL  
11. 5J-8325 [1] SEAL-U-CUP  
12. 8C-9121 [1] SEAL AS  
13. 1D-4627 [6] BOLT  
14. 9T-3505 C [1] HEAD  
15. 3G-6828 R [1] CYLINDER AS-HYD  
16. 3G-5999 [1] BEARING-SLEEVE  
17. 1U-1808 [1] PISTON  
18. 4J-7376 [1] RING-WEAR  
19. 5J-3488 [1] NUT-SELF LOCKING  
20. 8T-6745 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16420493
 

3G-6457: CYLINDER GP-RIPPER

3G6457 CYLINDER GP-RIPPER (08-11)
210MM (8.3IN) BORE X 457MM (18IN) STROKE
TYPE 2. RIPPER S/N 1NH1-UP,1PH1-UP
PART OF 4T8859, 4T8865 RIPPER ARS
AN ATTACHMENT
c712338 SEBP1642
3G6457 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 THD)  
2. 119-8455 [2] WASHER  
3. 5J-5559 [1] SEAL AS  
4. 8J-4386 C [1] SEAL-O-RING  
5. 3G-3747 C [1] RING-BACKUP  
6. 1D-4630 [2] BOLT (7/8-9X4IN)  
7. 5P-8249 [8] WASHER (4.0MM THK)  
8. 147-6116 R [1] ROD AS  
9. 3G-5999 [1] BEARING-SLEEVE  
10. 8T-8389 [1] SEAL (81MM ID)  
11. 5J-8325 [1] SEAL-U-CUP (80.7MM ID)  
12. 8C-9121 [1] SEAL AS  
13. 1D-4627 [6] BOLT (7/8-9X3IN)  
14. 100-9965 C [1] HEAD  
15. 3G-6828 R [1] CYLINDER AS-HYDRAULIC  
16. 3G-5999 [1] BEARING-SLEEVE  
17. 105-4172 [1] PISTON  
18. 4J-7376 [1] RING-WEAR  
19. 5J-3488 [1] LOCKNUT (2 1/4-12 THD)  
20. 8T-6745 [1] RING-WEAR  
21. 8T-8382 C [1] SEAL-HEAD  
22. 2H-3755 C [4] BOLT (5/16-18X.625IN)  
  7S-6369 C [4] WASHER (4.8MM THK)  
23. 1P-4577 [4] FLANGE-HALF  
24. 5S-7382 [8] BOLT (3/8-16X1.375IN)  
25. 8T-4896 [8] WASHER-HARD (2.5MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16420494
 

7T-5382: VALVE & CYLINDER GP-RH

7T5382 VALVE & CYLINDER GP-RH
BULLDOZER S/N 1LH1-UP,1MH1-UP
9T2860-PAGE 232, 4T4204-PAGE 240
PART OF 7T5381, 7T5392 BULLDOZER ARS
AN ATTACHMENT
c572473 SEBP1642
7T5382 VALVE & CYLINDER GP-RH Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4204 Y [1] VALVE GP  
2. 9T-2860 Y [1] CYLINDER GP-LIFT  
3. 7T-4890 [1] PLATE  
4. 0S-1619 [4] BOLT  
5. 5P-1075 [4] WASHER-HARD  
6. 9P-8514 [1] TUBE AS  
7. 6V-0422 [1] PLUG  
8. 0T-0768 [4] BOLT  
9. 5P-8244 [4] WASHER  
10. 1P-5761 [2] FLANGE-HALF  
11. 1P-3704 [2] SEAL-RECTANGULAR  
12. 3G-0910 [1] CAP-BEARING  
  3G-0911 B [26] SHIM  
13. 9S-1322 [4] BOLT  
  2J-3505 [4] NUT-FULL  
14. 1P-4577 [4] FLANGE-HALF  
15. 5S-7382 [8] BOLT  
  8T-4896 [8] WASHER-HARD  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420495
 

7T-5383: VALVE & CYLINDER GP-LH

7T5383 VALVE & CYLINDER GP-LH
BULLDOZER S/N 1LH1-UP,1MH1-UP
9T2860-PAGE 232, 4T4204-PAGE 240
PART OF 7T5381, 7T5392 BULLDOZER ARS
AN ATTACHMENT
c580464 SEBP1642
7T5383 VALVE & CYLINDER GP-LH Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4204 Y [1] VALVE GP  
2. 9T-2860 Y [1] CYLINDER GP-LIFT  
3. 7T-4890 [1] PLATE  
4. 0S-1619 [4] BOLT  
5. 5P-1075 [4] WASHER-HARD  
6. 7G-4844 [1] TUBE AS  
7. 6V-0422 [1] PLUG  
8. 0T-0768 [4] BOLT  
9. 5P-8244 [4] WASHER  
10. 1P-5761 [2] FLANGE-HALF  
11. 1P-3704 [2] SEAL-RECTANGULAR  
12. 3G-0910 [1] CAP-BEARING  
  3G-0911 B [26] SHIM (.8MM THK)  
13. 9S-1322 [4] BOLT  
  2J-3505 [4] NUT-FULL  
14. 1P-4577 [4] FLANGE-HALF  
15. 5S-7382 [8] BOLT  
16. 8T-4896 [8] WASHER-HARD  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP16420496
 

9T-2860: CYLINDER GP-LIFT

9T2860 CYLINDER GP-LIFT (CHGS 00-06)
133.35 MM (5.25IN) BORE X 1535 MM (60.4IN) STROKE
TYPE 1. BULLDOZER S/N 1LH1-UP,1MH1-UP
PART OF 7T5382, 7T5383 VALVES & CYLINDERS
AN ATTACHMENT
c517629 SEBP1642
9T2860 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8231 [1] PISTON AS  
2. 5J-2529 [4] INSERT  
3. 5J-2528 [2] PLUNGER  
4. 3G-8191 [1] WASHER  
5. 3G-8194 R [1] CYLINDER AS  
  1S-8241 [4] BOSS (SMALL)  
  6J-1323 [4] LUG (LARGE)  
6. 5J-1192 [2] BEARING-SLEEVE  
7. 8C-9126 J [1] SEAL AS  
8. 1D-4610 [4] BOLT  
  5P-8248 [4] WASHER-HARD  
9. 9T-2828 [1] HEAD  
10. 5J-5731 [1] NUT-SELF LOCKING  
11. 9J-7978 J [1] RING-WEAR  
12. 8C-5218 J [1] SEAL-LIP TYPE  
13. 8T-0763 J [1] SEAL AS  
14. 2J-7767 J [1] RING-BACK-UP  
15. 5F-3106 J [1] SEAL-O-RING  
16. 4T-0406 R [1] ROD AS  
17. 5J-8300 J [1] SEAL-U-CUP  
18. 8T-1714 [1] RING-WEAR  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7X-2756 [1] KIT-HYDRAULIC CYLINDER  
    (INCL PARTS MARKED J)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16420497
 

9T-2860: CYLINDER GP-LIFT

9T2860 CYLINDER GP-LIFT (CHGS 07-08)
133.35 MM (5.25 IN) BORE X 1535 MM (60.4 IN) STROKE
TYPE 2. BULLDOZER S/N 1LH1-UP,1MH1-UP
PART OF 7T5382, 7T5383 VALVES & CYLINDERS
AN ATTACHMENT
c608533 SEBP1642
9T2860 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8231 [1] PISTON AS  
2. 5J-2529 [4] INSERT  
3. 5J-2528 [2] PLUNGER  
4. 3G-8191 [1] WASHER  
5. 3G-8194 R [1] CYLINDER AS  
6. 5J-1192 [2] BEARING-SLEEVE  
7. 8C-9126 J [1] SEAL AS  
8. 1D-4610 [4] BOLT (83MM LG)  
  5P-8248 [4] WASHER-HARD (3.5MM THK)  
9. 106-6267 C [1] HEAD  
10. 5J-5731 [1] LOCKNUT  
11. 9J-7978 J [1] RING-WEAR  
12. 8C-5218 J [1] SEAL-LIP  
13. 8T-0763 J [1] SEAL AS  
14. 2J-7767 J [1] RING-BACKUP  
15. 5F-3106 J [1] SEAL-O-RING (126.59MM ID)  
16. 4T-0406 R [1] ROD AS  
17. 5J-8300 J [1] SEAL-U-CUP  
18. 9T-0094 C [1] RING-WEAR  
19. 7S-6369 C [4] WASHER  
  2H-3755 C [4] BOLT (5/16 X 18 X .625IN)  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7X-2756 [1] KIT-HYDRAULIC CYLINDER  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16420498
 

6T-4531: VALVE & MOUNTING GP

6T4531 VALVE & MOUNTING GP
PART OF 7T4413 CONTROL AR-HYDRAULIC
AN ATTACHMENT
c335199 SEBP1642
6T4531 VALVE & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9559 [1] MANIFOLD  
2. 9G-9988 [1] VALVE GP-SOLENOID  
  6T-3383 [1] COIL AS  
3. 7N-8205 [1] HOUSING-PLUG  
  7N-7780 [2] PIN-CONNECTOR  
  7N-7779 [2] SOCKET  
4. 1S-9593 [2] STRAP-CABLE  
5. 9S-1354 [1] NUT  
6. 6T-3382 [1] CARTRIDGE AS  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  6T-3381 [1] KIT-SEAL  
 

#SEBP16420499
 

3G-5091: VALVE GP-PILOT

3G5091 VALVE GP-PILOT
BULLDOZER TILT. S/N 1JD1-637
3G8693-PAGE 236
PART OF 7T5461 CONTROL-TOWING WINCH
c344929 SEBP1642
3G5091 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [1] PLUG-O-RING  
2. 3J-1907 [2] SEAL  
3. 9S-8002 [1] PLUG-O-RING  
  3J-7354 [1] SEAL-O-RING  
4. 8J-1699 [4] SEAL-O-RING  
5. 1F-5842 [2] BOLT  
6. 5P-3108 [6] SEAL-O-RING  
7. 8H-8769 [1] BOLT  
8. 3G-7669 [1] MANIFOLD  
9. 6J-3134 [2] SEAL  
10. 9S-4191 [1] PLUG-O-RING  
11. 3G-8693 Y [1] VALVE GP-PILOT  
12. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
13. 1U-4717 [1] BODY  
   
  F [1] PLATE  
  7B-3028 F [1] SCREW-DRIVE  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bulldozer Lift Cylinder
D9N TRACK-TYPE TRACTOR HYDRAULICS
Bulldozer Tilt Cylinder
D9N TRACK-TYPE TRACTOR HYDRAULICS
Ripper Lift Cylinders
D9N TRACK-TYPE TRACTOR HYDRAULICS
Ripper Tip Cylinders
D9N TRACK-TYPE TRACTOR HYDRAULICS
Pin Puller Cylinder
D9N TRACK-TYPE TRACTOR HYDRAULICS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bulldozer Lift Cylinders
D9N TRACTOR VEHICLE SYSTEMS
Bulldozer Lift Cylinder Mounts
D9N TRACTOR VEHICLE SYSTEMS
Bulldozer Tilt Cylinder
D9N TRACTOR VEHICLE SYSTEMS
Ripper Lift Cylinder
D9N TRACTOR VEHICLE SYSTEMS
Service Magazine
Improved Bulldozer Lift Cylinder Groups {5102,6050}
1987/09/28
New Pistons Provide Increased Clearance In Bulldozer Lift Cylinders{5102}
1989/09/11
Different Tilt Cylinder Hose Connections Used With New Ripper Control Valve{5356,5057,5351}
1989/11/13
New Rod Assemblies With Larger Eyes Used In Bulldozer Tilt Cylinder Groups{5104}
1990/11/26
New Head and Seals Improve Sealing of Ripper Tilt Cylinder{5104}
1993/02/22
New Piston Assemblies For Dual Tilt Cylinders {5104}
1994/02/21
Possible Incorrect 6S-Blade Lifting Cylinder Trunnion Brackets {5102}
1994/04/25
New Stronger Plunger Provides Increased Reliability{5104}
1995/05/08
New Piston Retaining Washer For Ripper Lift And Tilt Cylinder Groups {5352,5356,7526}
1996/08/12
New Ripper Group Improves Visibility And Service Life {5352,5356,6810,7067}
1997/03/31
New Rod In Lift Cylinder Has Larger Radius For Piston Shoulder To Increase Strength {5102,5352}
1998/07/27
Improved Tilt Cylinder Lines Design Prevents Hose Failures {5057,6071}
1999/01/11
New Bearing And Grease Fitting In Rod End Of Tilt Cylinders {5104}
1999/07/05
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D9N :

CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-RIPPER PIN PULLER
9T-2066 CYLINDER GP-RIPPER PIN PULLER
MOUNTING GP-CYLINDER
9J-7623 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
9J-7623 MOUNTING GP-CYLINDER
PUMP GP-GEAR
9T-9839 PUMP GP-GEAR
LINES GP-PUMP
6Y-8143 LINES GP-PUMP
LINES GP-PUMP
6Y-8143 LINES GP-PUMP
LINES GP-PUMP
9W-1757 LINES GP-PUMP
CYLINDER GP-RIPPER TILT
9T-0106 CYLINDER GP-RIPPER TILT
CYLINDER GP-RIPPER
3G-6457 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
3G-6457 CYLINDER GP-RIPPER
VALVE & CYLINDER GP-RH
7T-5382 VALVE & CYLINDER GP-RH
VALVE & CYLINDER GP-LH
7T-5383 VALVE & CYLINDER GP-LH
CYLINDER GP-LIFT
9T-2860 CYLINDER GP-LIFT
CYLINDER GP-LIFT
9T-2860 CYLINDER GP-LIFT
VALVE & MOUNTING GP
6T-4531 VALVE & MOUNTING GP

Truck sale:

Caterpillar D9N, Construction
149,444 USD 
Caterpillar D9N, Construction
- Dozers
FINNING CANADA
Canada
Caterpillar D9N, Construction
59,900 
Caterpillar D9N, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D9N 1990
 
CATERPILLAR D9N 1990
- TRACK TYPE TRACTORS
LOUISIANA CAT
Louisiana United States
CATERPILLAR D9N 1992
 
CATERPILLAR D9N 1992
- TRACK TYPE TRACTORS
TRACTORS INDIA PVT LIMITED [TIPL]
CATERPILLAR D9N 1989
 
CATERPILLAR D9N 1989
- TRACK TYPE TRACTORS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.