AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9W1182 COVER GP-TRANSMISSION S/N 9NC1-293 & 2HD1-290 PART OF 7T9500 TRANSMISSION 508 WHEEL SKIDDER


POWER TRAIN
TRANSMISSION GP
PUMP GP
TORQUE CONVERTER GP
OPERATOR STATION
CONTROL GP-TRANSMISSION
POWER TRAIN
VALVE GP-CONTROL

WHEEL SKIDDER 508 WHEEL SKIDDER 2HD
 508 SKIDDER AND GRAPPLE SKIDDER 2HD00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1643 508 2HD   (1986)

POWER TRAIN

TRANSMISSION GP
8E-3329 TRANSMISSION GP-TORQUE CONV
8E-3329 TRANSMISSION GP-TORQUE CONV
COVER GP-TRANSMISSION
9W-1182 COVER GP-TRANSMISSION
COVER GP-TRANSMISSION
9W-1182 COVER GP-TRANSMISSION
 

#SEBP16430140
 

9W-1182: COVER GP-TRANSMISSION

9W1182 COVER GP-TRANSMISSION
S/N 9NC1-293 & 2HD1-290
PART OF 7T9500 TRANSMISSION
c351143 SEBP1643
9W1182 COVER GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-1465 [1] SEAL-RING  
2. 053-4668 [1] COVER  
3. 052-3107 [3] SCREW  
4. 069-5843 [1] VALVE AS  
5. 2R-5657 [1] PLUG  
6. 9W-5644 [3] SLEEVE  
 

#SEBP16430141
 

9W-1182: COVER GP-TRANSMISSION

9W1182 COVER GP-TRANSMISSION
S/N 9NC294-UP & 2HD291-UP
PART OF 7T9500 TRANSMISSION
c471378 SEBP1643
9W1182 COVER GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-6252 CB SEALANT  
2. 6Y-5177 C [1] COVER  
3. 052-3107 [3] SCREW  
4. 069-5843 [1] VALVE AS  
5. 2R-5657 [1] PLUG  
6. 9W-5644 [3] SLEEVE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16430142
 

6Y-4932: PUMP GP-CHARGE

6Y4932 PUMP GP-CHARGING
S/N 9NC294-UP & 2HD291-UP
PART OF 7T9500 TRANSMISSION
c507301 SEBP1643
6Y4932 PUMP GP-CHARGE Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-0916 [1] GEAR  
2. 8E-5244 [1] GASKET-MANIFOLD  
3. 6Y-4934 [1] PUMP GP-CHARGE  
4. 8T-6404 [1] SEAL-O-RING  
5. 0L-1352 [2] BOLT  
6. 3B-4506 [4] LOCKWASHER  
7. 9W-1123 [1] VALVE-CHECK  
8. 1A-5964 [2] BOLT  
9. 6H-3957 [1] BALL BEARING  
10. 1S-6106 [1] RING-SNAP  
11. 6Y-7493 [1] BAFFLE  
12. 2L-1352 [2] BOLT  
  7X-3393 [2] WASHER-HARD  
13. 8M-4435 [1] SEAL  
 

#SEBP16430143
 

9W-1178: TORQUE CONVERTER GP

9W1178 TORQUE CONVERTER GP
S/N 9NC1-293 & 2HD1-290
PART OF 7T9500 TRANSMISSION-TORQUE CONVERTER
c351140 SEBP1643
9W1178 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3328 [20] NUT-SPECIAL  
2. 9W-1739 [28] WASHER  
3. 1B-7182 [20] BOLT  
4. 9W-1176 [1] TURBINE  
5. 9W-1171 [1] HUB-STATOR  
6. 6V-0835 [2] RING-RETAINING  
7. 7D-1188 [2] RACE-THRUST  
8. 3S-9032 [1] BEARING-THRUST  
9. 9W-1173 [1] COVER AS-CONVERTER  
10. 9W-1169 [1] HUB-TURBINE  
11. 7T-3619 [1] BEARING-NEEDLE  
12. 9W-2027 [2] BEARING-NEEDLE (THRUST)  
13. 9W-1170 [1] SEAL  
14. 9W-1172 [2] RETAINER-CLUTCH  
15. 9W-6513 [4] RACE-THRUST  
16. 069-3776 [1] SEAL  
17. 9W-1174 [1] HUB-IMPELLER  
18. 032-5473 [8] BOLT-SELF LOCKING  
19. 6V-1320 [1] SEAL-O-RING  
20. 9W-1175 [1] STATOR  
21. 9W-1177 [1] IMPELLER  
 

#SEBP16430144
 

6Y-2286: TORQUE CONVERTER GP

6Y2286 TORQUE CONVERTER GP
S/N 9NC1-293 & 2HD1-290
PART OF 7T9500 TRANSMISSION-TORQUE CONVERTER
c459619 SEBP1643
6Y2286 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3328 [20] NUT-SPECIAL  
2. 9W-1739 [48] WASHER  
3. 1B-7182 [20] BOLT  
4. 9W-1176 [1] TURBINE  
5. 9W-1171 [1] HUB-STATOR  
6. 6V-0835 [2] RING-RETAINING  
7. 7D-1188 [2] RACE-THRUST  
8. 3S-9032 [1] BEARING-THRUST  
9. 6Y-2246 [1] COVER AS  
10. 9W-1169 [1] HUB-TURBINE  
11. 7T-3619 [1] BEARING-NEEDLE  
12. 9W-2027 [2] BEARING-NEEDLE  
13. 9W-1170 [1] SEAL  
14. 9W-1172 [2] RETAINER-CLUTCH  
15. 9W-6513 [4] RACE-THRUST  
16. 069-3776 [1] SEAL  
17. 9W-1174 [1] HUB-IMPELLER  
18. 032-5473 [8] BOLT-SELF LOCKING  
19. 6V-1320 [1] SEAL-O-RING  
20. 9W-1175 [1] STATOR  
21. 9W-1177 [1] IMPELLER  
 

#SEBP16430145
 

6Y-5179: TORQUE CONVERTER GP

6Y5179 TORQUE CONVERTER GP
S/N 9NC294-UP & 2HD291-UP
PART OF 7T9500 TRANSMISSION-TORQUE CONVERTER
c504679 SEBP1643
6Y5179 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-2246 [1] COVER AS  
2. 1B-1293 [20] BOLT  
3. 6Y-4871 [1] SEAL-O-RING  
4. 9W-1169 [1] HUB-TURBINE  
5. 9W-1176 [1] TURBINE  
6. 9W-6513 [4] RACE-THRUST  
7. 9W-1172 [2] RETAINER-CLUTCH  
8. 9W-1175 [1] STATOR  
9. 6V-0835 [2] RING-RETAINING  
10. 9W-2027 [2] BEARING-NEEDLE  
11. 6Y-5178 [1] HUB-IMPELLER  
12. 9W-1177 [1] IMPELLER  
13. 9W-1739 [48] WASHER  
14. 1B-4202 [20] NUT  
15. 032-5473 [8] BOLT-SELF LOCKING  
16. 069-3776 [1] SEAL  
17. 6V-1320 [1] SEAL-O-RING  
18. 9W-1171 [1] HUB-STATOR  
19. 7D-1188 [2] RACE-THRUST  
20. 3S-9032 [1] BEARING-THRUST  
21. 7T-3619 [1] BEARING-NEEDLE  
 

#SEBP16430146
 

8V-2237: CONTROL GP-TRANSMISSION

8V2237 CONTROL GP-TRANSMISSION-PART 1 OF 2
c472311 SEBP1643
8V2237 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [2] PIN  
  3B-4615 [2] PIN-COTTER  
2. 1B-8706 [2] KEY-WOODRUFF  
3. 7P-2938 [1] LEVER  
4. 4L-9337 [4] BOLT  
5. 6V-8801 [3] NUT  
6. 2K-6567 [2] SPACER  
7. 9V-2730 [1] SHAFT  
8. 2P-9858 [4] BEARING-ROLLER  
9. 5P-9083 [1] ROD END-BEARING  
  6F-0612 [1] NUT-JAM  
10. 6V-9264 BD SEAL  
11. 9V-2728 [1] CABLE AS  
12. 8M-2770 [4] CLIP  
13. 5M-3062 [4] BOLT  
14. 8T-4896 [5] WASHER-HARD  
15. 9V-9116 [1] SPACER  
16. 4H-4851 [2] LEVER  
17. 4M-6424 [3] BOLT  
  8T-4224 [3] WASHER-HARD  
18. 9C-3878 [1] ROD AS  
  5B-9079 [1] NUT-JAM  
  1M-1341 [1] ROD END-YOKE  
19. 6W-9411 [1] BRACKET  
20. 1A-9252 [1] END-ADJUSTABLE ROD  
  5B-9079 [1] NUT-JAM  
21. 9V-2732 [1] SHAFT  
22. 2L-6267 [1] LOCKNUT  
23. 1B-8702 [1] KEY-WOODRUFF  
24. 9C-0245 [1] SPACER  
25. 6D-4972 [2] SPACER  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP16430147
 

8V-2237: CONTROL GP-TRANSMISSION

8V2237 CONTROL GP-TRANSMISSION-PART 2 OF 2
c472312 SEBP1643
8V2237 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-2036 [1] RACK  
2. 6K-0079 [1] LOCK  
  1B-8705 [1] KEY-WOODRUFF  
3. 9V-2726 [1] BLOCK AS  
4. 8H-1037 [1] RING-RETAINING  
5. 9V-2725 [1] ROD  
6. 6D-0082 [1] SPACER  
7. 5K-2294 [1] BEARING  
8. 5V-9966 [1] TUBE AS  
9. 5P-6446 [3] BOLT-12 POINT HEAD  
10. 2H-1650 [2] WASHER  
11. 1V-1762 [1] RING-RETAINING  
12. 6K-5177 [1] HANDLE-SHIFT  
  3K-1644 [1] SCREW  
13. 6K-2034 [1] SHAFT  
14. 8K-8192 [1] COLLAR-INDICATOR  
  4B-9806 [1] SETSCREW-SOCKET  
15. 9C-2101 [1] HOUSING AS  
16. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING (23.47MM ID)  
17. 2M-2489 [1] SEAL-LIP TYPE  
18. 9B-2232 [1] CAP-TACHOMETER DRIVE  
  8M-8997 [1] SEAL-O-RING  
19. 6K-0053 [1] HOUSING  
20. 4L-9337 [1] BOLT  
21. 6V-8801 [1] NUT  
22. 9V-2729 [1] LEVER  
23. 1B-8706 [2] KEY-WOODRUFF  
24. 6V-9264 BD SEAL  
25. 9V-2734 [1] PLATE AS  
26. 5P-6438 [1] ROD END-YOKE  
  6F-0612 [1] NUT-JAM  
27. 3B-4615 [3] PIN-COTTER  
  1B-0676 [3] PIN  
28. 9V-2733 [2] LINK  
29. 4L-6454 [1] BOLT  
30. 6K-0019 [1] LEVER  
31. 2L-6267 [1] LOCKNUT  
32. 8T-4896 [4] WASHER-HARD  
33. 5J-5315 [1] ROD END  
  5B-9079 [1] NUT-JAM  
34. 4L-6459 [2] BOLT  
35. 4B-4283 B [4] WASHER  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP16430148
 

9W-1130: VALVE GP-CONTROL

9W1130 VALVE GP-CONTROL
TYPE 1. S/N 9NC1-293 & 2HD1-290
PART OF 7T9500 TRANSMISSION-TORQUE CONVERTERS
c400859 SEBP1643
9W1130 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3455 [1] PIN-SPRING  
2. 9G-5093 [3] PLUG  
3. 6T-1467 [2] PLUG-PIPE  
4. 9W-1128 [1] VALVE  
5. 068-7277 [1] VALVE-DUMP  
6. 069-5043 [1] PIN  
7. 9W-1125 [1] STEM  
8. 9W-1196 [1] SPRING  
9. 068-7274 [1] SPRING-RETURN  
10. 9W-1127 [1] WASHER  
11. 9W-1124 [3] SHIM  
12. 6T-7462 [1] NUT  
13. 9G-5090 [5] SEAL-O-RING  
14. 8W-1285 C [1] SWITCH  
15. 7T-3180 [1] GASKET  
16. 005-8157 [3] PLUG  
17. 9G-5092 [1] SEAL-O-RING  
18. 068-7276 [1] SPRING-VALVE  
19. 6T-1472 [1] PLUG-DUMP VALVE  
20. 9G-5091 [1] SEAL-O-RING  
21. 6T-7463 [1] SPACER  
22. 6T-9565 [1] NUT-LOCKING  
23. 068-7240 [1] CAP-REGULATOR  
24. 9W-8775 C [1] FITTING  
25. 9W-8778 C [1] SPRING  
26. 6T-1463 [1] PISTON  
27. 068-7287 [1] PLUG  
28. 2M-7316 [3] SEAL-LIP TYPE  
29. 068-7286 [1] STEM AS-VALVE  
30. 6T-7469 [1] SPOOL  
31. 9W-1122 [1] TUBE AS  
32. 9W-1126 [1] SPOOL AS  
33. 068-7289 [2] SPRING-DETENT  
34. 4B-9782 [2] BALL  
35. 9W-1123 [1] VALVE-CHECK  
36. 006-0210 [1] TEE  
37. 5P-4479 C [1] ELBOW  
38. 061-7921 C [1] CONNECTOR-SPECIAL  
39. 9W-8777 C [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16430149
 

9W-1130: VALVE GP-CONTROL

9W1130 VALVE GP-CONTROL
TYPE 2. S/N 9NC1-293 & 2HD1-290
PART OF 7T9500 & 8E3329 TRANSMISSION-TORQUE CONVERTERS
c467053 SEBP1643
9W1130 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 508 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3455 [1] PIN-SPRING  
2. 9G-5093 [3] PLUG  
3. 6T-1467 [2] PLUG-PIPE  
4. 9W-1128 [1] VALVE  
5. 068-7277 [1] VALVE-DUMP  
6. 069-5043 [1] PIN  
7. 9W-1125 [1] STEM  
8. 9W-1196 [1] SPRING  
9. 068-7274 [1] SPRING-RETURN  
10. 9W-1127 [1] WASHER  
11. 9W-1124 B [3] SHIM .833MM(.033IN)THK  
12. 6T-7462 [1] NUT  
13. 9G-5090 [5] SEAL-O-RING  
14. 8W-1285 [1] SWITCH  
15. 6Y-5180 [1] GASKET  
16. 005-8157 [2] PLUG  
17. 9G-5092 [1] SEAL-O-RING  
18. 068-7276 [1] SPRING-VALVE  
19. 6T-1472 [1] PLUG-DUMP VALVE  
20. 9G-5091 [1] SEAL-O-RING  
21. 6T-7463 [1] SPACER  
22. 6T-9565 [1] NUT-LOCKING  
23. 068-7240 [1] CAP-REGULATOR  
24. 9W-8775 [1] FITTING  
25. 9W-8778 [1] SPRING  
26. 6T-1463 [1] PISTON  
27. 068-7287 [1] PLUG  
28. 2M-7316 [3] SEAL-LIP TYPE  
29. 068-7286 [1] STEM AS-VALVE  
30. 6T-7469 [1] SPOOL  
31. 9W-1122 [1] TUBE AS  
32. 6Y-0499 C [1] SPOOL AS  
33. 068-7289 [2] SPRING-DETENT  
34. 4B-9782 [2] BALL  
35. 9W-1123 [1] VALVE-CHECK  
36. 006-0210 [1] TEE  
37. 5P-4479 [1] ELBOW  
38. 061-7921 [1] CONNECTOR-SPECIAL  
39. 9W-8777 [1] SPRING  
40. 069-0732 [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Power Shift Transmission
508 SKIDDER POWER TRAIN
Oil Pump For The Power Shift Transmission<BR> 9W1163 (9NC1-293, 2HD1-290); 6Y4932 (9NC294-UP, 2HD291-UP)
508 SKIDDER POWER TRAIN
Transmission Oil Filter
508 SKIDDER POWER TRAIN
Engine And Transmission Mounting Group
508 SKIDDER POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Bench Test Procedure for a 508 Wheel Skidder Transmission{3030, 3073, 3101}
Bench Test Procedure for a 508 Wheel Skidder Transmission{3030, 3073, 3101}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine And Transmission
508 SKIDDER & 508 GRAPPLE SKIDDER POWER TRAIN
Transmission
508 SKIDDER & 508 GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 508 :

PUMP GP-CHARGE
9W-1163 PUMP GP-CHARGE
8E-3329 TRANSMISSION GP-TORQUE CONV
8E-3329 TRANSMISSION GP-TORQUE CONV
8E-3329 TRANSMISSION GP-TORQUE CONV
8E-3329 TRANSMISSION GP-TORQUE CONV
8E-3329 TRANSMISSION GP-TORQUE CONV
TRANSMISSION GP-TORQUE CONV
8E-3329 TRANSMISSION GP-TORQUE CONV
7T-9500 TRANSMISSION GP-TORQUE CONV
COVER GP-TRANSMISSION
9W-1182 COVER GP-TRANSMISSION
PUMP GP-CHARGE
6Y-4932 PUMP GP-CHARGE
TORQUE CONVERTER GP
9W-1178 TORQUE CONVERTER GP
TORQUE CONVERTER GP
6Y-2286 TORQUE CONVERTER GP
TORQUE CONVERTER GP
6Y-5179 TORQUE CONVERTER GP
CONTROL GP-TRANSMISSION
8V-2237 CONTROL GP-TRANSMISSION
8V-2237 CONTROL GP-TRANSMISSION
VALVE GP-CONTROL
9W-1130 VALVE GP-CONTROL

Truck sale:

Caterpillar 5080, Crawler Excavators, Construction
21,396 
Caterpillar 5080, Crawler Excavators, Construction
- Crawler Excavators
ZEPPELIN BAUMASCHINEN
Caterpillar 5080, Construction
49,325 
Caterpillar 5080, Construction
- Crawler Excavators
ZEPPELIN BAUMASCHINEN
Germany
Caterpillar 5080, Construction
54,114 
Caterpillar 5080, Construction
- Crawler Excavators
ZEPPELIN BAUMASCHINEN
Germany
Caterpillar 5080, Construction
90,000 
Caterpillar 5080, Construction
- Crawler Excavators
MILTON CAT
2000 CAT 5080
Call 
2000 CAT 5080

Resource Equipment & Materials
Ridgeland, Mississippi
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.