AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G5069 CYLINDER GP-TILT-RH-(CHGS 02-05) 178 MM (7 IN) BORE X 536 MM (21 IN) STROKE. TYPE 1 PART OF 9V3082, 4E0740 HYDRAULIC ARS AN ATTACHMENT 980C


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-SELECTOR & PRESS CONT
VALVE GP-PILOT

WHEEL LOADER 980C WHEEL LOADER 2XD
 980C WHEEL LOADER 2XD00001-UP (MACHINE) POWERED BY 3406 ENGINE SEBP1644 980C 2XD   (1986)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT-LH
3G-1306 CYLINDER GP-TILT-LH
CYLINDER GP-TILT
3G-5070 CYLINDER GP-TILT
CYLINDER GP-TILT
3G-5069 CYLINDER GP-TILT
CYLINDER GP-TILT
3G-5069 CYLINDER GP-TILT
 

#SEBP16440510
 

3G-5069: CYLINDER GP-TILT

3G5069 CYLINDER GP-TILT-RH-(CHGS 02-05)
178 MM (7 IN) BORE X 536 MM (21 IN) STROKE. TYPE 1
PART OF 9V3082, 4E0740 HYDRAULIC ARS
AN ATTACHMENT
c455189 SEBP1644
3G5069 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-5102 [1] CYLINDER AS  
2. 1V-8242 C [1] BEARING-SLEEVE  
3. 5J-3488 [1] NUT-SELF LOCKING  
4. 3G-5098 [1] RING-WEAR  
5. 8T-1789 [1] SEAL AS  
6. 3G-5099 [1] PISTON  
7. 4J-9218 [1] RING-BACK-UP  
8. 9F-1399 [1] SEAL-O-RING  
9. 1D-4628 [4] BOLT 83MM(3.25IN)LG  
10. 5P-8249 [8] WASHER  
11. 8C-3841 C [1] SEAL AS  
12. 5J-8275 [1] SEAL-U-CUP  
13. 8C-3842 C [1] SEAL-LIP TYPE  
14. 3G-4423 [1] ROD AS  
15. 1V-8242 [1] BEARING-SLEEVE  
16. 7K-9212 A [4] SEAL-LIP TYPE  
17. 1D-4629 [2] BOLT 89MM(3.50IN)LG  
18. 9T-4930 [1] HEAD  
19. 1A-5576 [2] BOLT 114MM(4.50IN)LG  
20. 8T-7849 [1] RING-WEAR  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16440511
 

3G-5069: CYLINDER GP-TILT

3G5069 CYLINDER GP-TILT-RH-(CHGS 06-08)
178 MM (7 IN) BORE X 536 MM (21 IN) STROKE. TYPE 2
PART OF 9V3082, 4E0740 HYDRAULIC ARS
AN ATTACHMENT
c653963 SEBP1644
3G5069 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-5102 [1] CYLINDER AS  
2. 1V-8242 [1] BEARING-SLEEVE  
3. 5J-3488 [1] LOCKNUT  
4. 3G-5098 [1] RING-WEAR  
5. 8T-1789 [1] SEAL AS  
6. 3G-5099 [1] PISTON  
7. 4J-9218 [1] RING-BACKUP  
8. 9F-1399 [1] SEAL-O-RING  
9. 1D-4628 [4] BOLT (83MM(3.25IN)LG)  
10. 5P-8249 [8] WASHER  
11. 8C-3841 [1] SEAL AS  
12. 5J-8275 [1] SEAL-U-CUP  
13. 8C-3842 [1] SEAL-LIP  
14. 3G-4423 C [1] ROD AS  
15. 1V-8242 [1] BEARING-SLEEVE  
16. 7K-9212 A [4] SEAL-LIP  
17. 1D-4629 [2] BOLT (89MM(3.50IN)LG)  
18. 9T-4930 [1] HEAD  
19. 1A-5576 [2] BOLT (114MM(4.50IN)LG)  
20. 8T-7849 [1] RING-WEAR  
21. 8T-8380 [1] SEAL-HEAD  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7X-2691 KIT-SEAL (INCLUDES SEALS & RINGS)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16440512
 

1U-2226: VALVE GP-SELECTOR & PRESS CONT

1U2226 VALVE GP-SELECTOR & PRESSURE CONTROL
PART OF 9V2116, 9C3966 LINES-PILOT
c537818 SEBP1644
1U2226 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-8553 [1] SPRING  
2. 5S-7001 B [5] SPACER .91MM(.036IN)THK  
  5S-7018 B [3] SPACER .25MM(.010IN)THK  
3. 1U-2228 [1] VALVE GP  
4. 6V-2606 [2] ADAPTER-STRAIGHT THREAD  
  2M-9780 [2] SEAL-O-RING (19.18MM ID)  
  B   USE AS REQUIRED
 

#SEBP16440513
 

1U-2172: VALVE GP-PILOT

1U2172 VALVE GP-PILOT-PART 1 OF 2
S/N 2XD1-1607
PART OF 9V2116 LINES-PILOT
c490544 SEBP1644
1U2172 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-9005 [2] ACTUATOR  
2. 1U-2176 [4] SLEEVE  
3. 1U-2234 [4] NUT  
4. 6V-2483 [1] SEAL-O-RING  
5. 1U-2071 [4] RETAINER  
6. 3G-9003 [4] SPRING (OUTER)  
7. 9T-3062 C [1] VALVE GP  
8. 9S-4191 [1] PLUG-O-RING  
  3J-1907 [1] SEAL  
9. 9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
10. 3G-9859 [4] SPRING (INNER)  
11. 1U-2070 [4] RETAINER  
12. 5S-7018 B [8] SPACER  
13. 3G-8998 [4] PLUNGER  
14. 009-0008 [4] SETSCREW-SOCKET  
15. 1U-2074 C [1] COVER  
16. 0T-0573 C [2] BOLT  
  5H-6005 C [2] SEAL-O-RING  
17. 5H-3182 [2] PIN-SPRING  
18. 9S-8006 [2] PLUG-O-RING  
  2M-9780 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16440514
 

1U-2172: VALVE GP-PILOT

1U2172 VALVE GP-PILOT-PART 2 OF 2
S/N 2XD1-1607
PART OF 9V2116 LINES-PILOT
c351206 SEBP1644
1U2172 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3044 [4] BEARING-NEEDLE  
2. 3G-9004 [2] SHAFT  
3. 9S-4190 [4] PLUG-0-RING  
  2M-9780 [4] SEAL-O-RING  
4. 1U-2175 [1] SCREEN AS  
5. 1U-2067 [1] RETAINER  
6. 0L-0723 [4] WASHER  
7. 7J-7673 [2] SEAL-LIP TYPE  
8. 0T-0431 C [1] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16440515
 

1U-2620: VALVE GP-PILOT

1U2620 VALVE GP-PILOT
PART OF 9V2115 LINES-PILOT
AN ATTACHMENT
c486165 SEBP1644
1U2620 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2764 [1] ACTUATOR  
2. 1B-4427 [2] NUT-JAM  
3. 2A-0762 [2] BOLT  
4. 044-3165 [1] PIN  
5. 1U-3147 [2] SEAL-U-CUP  
6. 033-6044 [2] SEAL-O-RING  
7. 9S-4191 [5] PLUG-O-RING  
8. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL-O-RING  
9. 1U-2621 [1] VALVE GP  
10. 3G-9003 [2] SPRING  
11. 3G-9859 [2] SPRING  
12. 1U-2070 [2] RETAINER  
13. 5S-7018 [4] SPACER  
14. 1U-2071 [2] RETAINER  
15. 1U-2762 [1] BRACKET-PIVOT  
16. 8J-1622 [2] NUT  
17. 1U-2751 [2] SLEEVE  
18. 1U-2752 [2] PLUNGER  
19. 1U-2765 [1] BOOT  
20. 9M-4252 [2] BEARING-SLEEVE  
21. 3D-4603 [1] PLUG-PIPE  
22. 9S-8004 [2] PLUG-O-RING  
23. 3J-1907 [7] SEAL  
 

#SEBP16440516
 

9T-6061: VALVE GP-PILOT

9T6061 VALVE GP-PILOT
S/N 2XD1608-1685, 1687
9T6648-PAGE 248.03, 9T6649-PAGE 248.04
PART OF 9C3963 CONTROL-PILOT OPERATED HYDRAULIC
c491675 SEBP1644
9T6061 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0737 [3] ROD  
  6V-8189 [6] NUT (5/16-18 THD)  
2. 5P-6718 [1] SEAL-O-RING (18.64MM ID)  
3. 9T-6648 Y [1] VALVE GP-PILOT  
4. 6V-3683 [1] SEAL-O-RING (23.39MM ID)  
5. 9T-6649 Y [1] VALVE GP-PILOT  
6. 6E-0742 [4] BODY-MAGNET  
7. 6E-0740 [1] PLATE AS-MOUNTING  
8. 6E-0747 [2] BOOT  
9. 6E-0741 [4] SPRING  
10. 8C-9682 [4] CLAPPER  
11. 6E-0739 [2] CLAMP-BOOT  
12. 8C-9635 [2] COIL AS-W/RECP  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
13. 7N-9738 [1] HOUSING-RECEPTACLE  
  7N-7780 [1] PIN-CONNECTOR  
  7N-7779 [1] SOCKET  
14. 1B-4430 [2] NUT-JAM (1/2-20 THD)  
15. 6E-0751 [2] BOLT-PIVOT  
16. 6E-0752 [2] NUT-SPECIAL  
17. 6E-0750 [2] BRACKET-PIVOT  
18. 6E-0749 [2] PLATE-PIVOT  
19. 6E-0746 [1] SLEEVE  
20. 8C-9683 [4] PLUNGER AS  
21. 9X-5993 [4] BOLT-SOCKET HEAD (5/16-18X4 IN)  
22. 8C-9634 [1] COIL AS-W/PLUG  
  1S-9593 [1] STRAP-CABLE  
23. 7N-9737 [1] HOUSING-PLUG  
  7N-7780 [1] PIN-CONNECTOR  
  7N-7779 [1] SOCKET  
24. 6E-0755 [2] PIN-PIVOT  
  7S-9930 [4] RING-RETAINING  
25. 6E-2464 [4] GASKET  
26. 6E-2465 [4] GASKET  
27. 6E-2466 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16440517
 

6E-3134: VALVE GP-PILOT

6E3134 VALVE GP-PILOT
S/N 2XD1686, 1688-1764
9T6648-PAGE 248.03, 9T6649-PAGE 248.04
PART OF 9C3963 CONTROL-PILOT OPERATED HYDRAULIC
c497080 SEBP1644
6E3134 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0737 [3] ROD  
  6V-8189 [6] NUT  
2. 5P-6718 [1] SEAL-O-RING (18.64MM ID)  
3. 9T-6648 Y [1] VALVE GP-PILOT  
4. 6V-3683 [1] SEAL-O-RING (23.39MM ID)  
5. 9T-6649 Y [1] VALVE GP-PILOT  
6. 6E-0742 [4] BODY-MAGNET  
7. 6E-0740 [1] PLATE AS-MOUNTING  
8. 6E-0747 [2] BOOT  
9. 6E-0741 [4] SPRING  
10. 8C-9682 [4] CLAPPER  
11. 6E-0739 [2] CLAMP-BOOT  
12. 8C-9635 [2] COIL AS-W/RECP  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
13. 7N-9738 [1] HOUSING-RECEPTACLE  
  7N-7780 [1] PIN-CONNECTOR  
  7N-7779 [1] SOCKET  
14. 5B-2183 [2] NUT-JAM  
15. 6E-3412 [2] BOLT-PIVOT  
16. 6E-3413 [2] NUT-SPECIAL  
17. 6E-0750 [2] BRACKET-PIVOT  
18. 6E-3411 [2] PLATE-PIVOT  
19. 6E-0746 [1] SLEEVE  
20. 8C-9683 [4] PLUNGER AS  
21. 9X-5993 [4] BOLT-SOCKET HEAD  
22. 8C-9634 [1] COIL AS-W/PLUG  
  1S-9593 [1] STRAP-CABLE  
23. 7N-9737 [1] HOUSING-PLUG  
  7N-7780 [1] PIN-CONNECTOR  
  7N-7779 [1] SOCKET  
24. 6E-0755 [2] PIN-PIVOT  
  7S-9930 [4] RING-RETAINING  
25. 6E-2464 [4] GASKET  
26. 6E-2465 [4] GASKET  
27. 6E-2466 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16440518
 

6E-4020: VALVE GP-PILOT

6E4020 VALVE GP-PILOT
S/N 2XD1765-UP
9T6648-PAGE 248.03, 9T6649-PAGE 248.04
PART OF 9C3963 CONTROL-PILOT OPERATED HYDRAULIC
c560606 SEBP1644
6E4020 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0737 [3] ROD  
  6V-8189 [6] NUT (5/16-18 THD)  
2. 5P-6718 [1] SEAL-O-RING (18.64MM ID)  
3. 9T-6648 Y [1] VALVE GP-PILOT  
4. 6V-3683 [1] SEAL-O-RING (23.39MM ID)  
5. 9T-6649 Y [1] VALVE GP-PILOT  
6. 6E-0742 [4] BODY-MAGNET  
7. 6E-0740 [1] PLATE AS-MOUNTING  
8. 6E-5237 [2] BOOT  
9. 107-4430 [4] SPRING  
10. 8C-9682 [4] CLAPPER  
11. 6E-5238 [2] CLAMP-BOOT  
12. 8C-9635 [2] COIL AS-W/RECP  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
13. 7N-9738 [1] HOUSING-RECEPTACLE  
  7N-7780 [1] PIN-CONNECTOR (BLADE)  
  7N-7779 [1] SOCKET  
14. 5B-2183 [2] NUT-JAM (9/16-18 THD)  
15. 6E-3412 [2] BOLT-PIVOT  
16. 6E-3413 [2] NUT-SPECIAL  
17. 6E-0750 [2] BRACKET-PIVOT  
18. 6E-3411 [2] PLATE-PIVOT  
19. 6E-0746 [1] SLEEVE  
20. 8C-9683 [4] PLUNGER AS  
21. 9X-5993 [4] BOLT-SOCKET HEAD (5/16-18X4 IN)  
22. 8C-9634 [1] COIL AS-W/PLUG  
  1S-9593 [1] STRAP-CABLE  
23. 7N-9737 [1] HOUSING-PLUG  
  7N-7780 [1] PIN-CONNECTOR (BLADE)  
  7N-7779 [1] SOCKET  
24. 6E-0755 [2] PIN-PIVOT  
  7S-9930 [4] RING-RETAINING  
25. 6E-2464 [4] GASKET  
26. 6E-2465 [4] GASKET  
27. 6E-2466 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16440519
 

9T-6648: VALVE GP-PILOT

9T6648 VALVE GP-PILOT
S/N 2XD1608-UP
6E0732-PAGE 257.02, 6E0733-PAGE 257.01
PART OF 9T6061, 9T6062, 6E3134, 6E3135, 6E4021, 6E4020 VALVES
c497420 SEBP1644
9T6648 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0743 [2] SPACER  
2. 6E-0733 Y [2] VALVE GP  
3. 5P-6718 [1] SEAL-O-RING  
4. 6E-0732 Y [2] VALVE GP  
5. 6E-2464 [4] GASKET  
6. 6V-3683 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 980C :

CYLINDER GP-TILT
3G-5070 CYLINDER GP-TILT
CYLINDER GP-TILT-LH
3G-1306 CYLINDER GP-TILT-LH
CYLINDER GP-TILT-RH
3G-1305 CYLINDER GP-TILT-RH
CYLINDER GP-TILT-LH
9T-2419 CYLINDER GP-TILT-LH
CYLINDER GP-TILT-LH
9T-2419 CYLINDER GP-TILT-LH
CYLINDER GP-TILT-RH
9T-2418 CYLINDER GP-TILT-RH
CYLINDER GP-TILT-RH
9T-2418 CYLINDER GP-TILT-RH
CYLINDER GP-LIFT
1U-3527 CYLINDER GP-LIFT
CYLINDER GP-TILT
3G-5069 CYLINDER GP-TILT
VALVE GP-SELECTOR & PRESS CONT
1U-2226 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-PILOT
1U-2172 VALVE GP-PILOT
1U-2172 VALVE GP-PILOT
VALVE GP-PILOT
1U-2620 VALVE GP-PILOT
VALVE GP-PILOT
9T-6061 VALVE GP-PILOT
VALVE GP-PILOT
6E-3134 VALVE GP-PILOT
VALVE GP-PILOT
6E-4020 VALVE GP-PILOT

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.