3412 ENGINE INDUSTRIAL 38S13236-16483 FUEL SYSTEM Caterpillar SIS

INDUSTRIAL ENGINE 3412 INDUSTRIAL ENGINE 38S
3412 ENGINE INDUSTRIAL 38S13236-16483 SEBP1648 3412 38S (1976)

Parts group 3412:

For full view, you need register

FUEL SYSTEM

CONTROL GP-GOVERNOR

7E-6314 MOUNTING GP-GOVERNOR CONTROL

7E6314 MOUNTING GP-VALVE
PART OF 4P6875 CONTROL-GOVERNOR

5N-3220 ACTUATOR GP-AIR

5N3220 ACTUATOR GP-AIR
PART OF 3N8146, 3N9473 & 3N8029 CONTROLS
AN ATTACHMENT

4W-5391 BOX AS-GOVERNOR PREREGULATOR

4W5391 PREREGULATOR BOX AS
AN ATTACHMENT

DRAIN GP-FUEL

2W-5100 DRAIN GP-FUEL

2W5100 DRAIN GP-FUEL
L.H.-LINES & ALARM SWITCH
CANNOT BE INSTALLED ON ENGINES WHEN L.H. PREMIUM INSTRUMENT
PANEL & L.H. DUPLEX OIL FILTER SYSTEMS ARE BOTH REQUIRED
AN ATTACHMNT

DRIVE GP-TACHOMETER

6N-8791 DRIVE GP-TACHOMETER

6N8791 DRIVE GP-TACHOMETER
SINGLE
FOR USE WITH WATERCOOLED MANIFOLD ONLY
AN ATTACHMENT

4N-1402 DRIVE GP-TACHOMETER

4N1402 DRIVE GP-TACHOMETER
SINGLE
AN ATTACHMENT

5N-3117 DRIVE GP-TACHOMETER

5N3117 DRIVE GP-TACHOMETER
AN ATTACHMENT

FILTER GP-FUEL

6N-6258 FILTER GP-FUEL

6N6258 FILTER GP-FUEL
DUPLEX-R.H.
FOR USE WITH WATERCOOLED MANIFOLD APPLICATIONS ONLY
AN ATTACHMENT

6N-6289 FILTER GP-FUEL

6N6289 FUEL FILTER GP
DUPLEX-L.H.
FOR USE WITH WATERCOOLED MANIFOLD APPLICATIONS & SINGLE
TURBOCHARGER AIR CLEANER. AN ATTACHMENT

4N-6925 FILTER GP-FUEL

4N6925 FILTER GP-FUEL

6N-3212 MOUNTING GP-PRIMARY FUEL FLTR

6N3212 MOUNTING GP-PRIMARY FUEL FILTER
NOT FOR USE WITH DUPLEX FUEL FILTERS
AN ATTACHMENT

8H-7204 FILTER GP-FUEL

8H7204 FILTER GP-PRIMARY FUEL
FOR USE WITH 6N3212 MOUNTING
AN ATTACHMENT

GOVERNOR GP

8N-8996 DRIVE GP-GOVERNOR & FUEL PUMP

8N8996 DRIVE GP-GOVERNOR & FUEL PUMP

6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP

6N3195 DRIVE GP-GOVERNOR & FUEL PUMP
FOR DIRECT INJECTION TURBOCHARGED

9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP

9N3959 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 38S13316-UP

2W-3986 DRIVE GP-GOVERNOR & FUEL PUMP

2W3986 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 38S13313-15099

9Y-3336 FASTENER GP-GOVERNOR

9Y3336 FASTENER GP
PART OF 4W6069, 4W8297, 4W8617, 4W8679, 4W8929, 7C9203,
7C9204 & 6I0868 PUMPS-GOVERNOR, FUEL INJECTION & FUEL TRANSFER

8N-2154 GOVERNOR GP

8N2154 GOVERNOR GP
OUTPUT SHAFT
8N2367-PAGE 380
PART OF 2W9320, 2W9321 CONVERSIONS
AN ATTACHMENT

4W-8678 GOVERNOR GP

4W8678 GOVERNOR GP-PART 1 OF 2
TYPE 1
7N8472-PAGE 381
PART OF 4W8679 PUMP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER

4W-8678 GOVERNOR GP

4W8678 GOVERNOR GP-PART 2 OF 2
TYPE 1
PART OF 4W8679 PUMP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER

4W-8678 GOVERNOR GP

4W8678 GOVERNOR GP-PART 1 OF 2
TYPE 2
7N8472-PAGE 381
PART OF 4W8679 PUMP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER

4W-8678 GOVERNOR GP

4W8678 GOVERNOR GP-PART 2 OF 2
TYPE 2
PART OF 4W8679 PUMP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER

7N-6271 GOVERNOR GP

7N6271 GOVERNOR GP-PART 1 OF 2
PART OF 7N8232, 8N9232 AND 2W8457 PUMPS

7N-6271 GOVERNOR GP

7N6271 GOVERNOR GP-PART 2 OF 2
9N3684-PAGE 382
PART OF 7N8232, 8N9232 AND 2W8457 PUMPS

4W-6013 GOVERNOR GP

4W6013 GOVERNOR GP-PART 1 OF 2
TYPE 1. REPLACED BY 7E0572-PAGE 375.03
PART OF 4W6069, 4W8617, 4W8929, 7C9203 & 7C9204 GOVERNOR,
FUEL INJECTION & FUEL TRANSFER PUMPS

4W-6013 GOVERNOR GP

4W6013 GOVERNOR GP-PART 2 OF 2
TYPE 1. REPLACED BY 7E0572-PAGE 375.03
4W7374-PAGE 384. PART OF 4W6069, 4W8617, 4W8929, 7C9203 & 7C9204
GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMPS

4W-6013 GOVERNOR GP

4W6013 GOVERNOR GP- PART 1 OF 2
TYPE 2. REPLACED BY 7E0572-PAGE 375.03
PART OF 4W6069, 4W8617, 4W8929, 7C9203 & 7C9204 GOVERNOR
FUEL INJECTION & FUEL TRANSFER PUMPS

4W-6013 GOVERNOR GP

4W6013 GOVERNOR GP-PART 2 OF 2
TYPE 2. REPLACED BY 7E0572-PAGE 375.03
4W7374-PAGE 384. PART OF 4W6069, 4W8617, 4W8929, 7C9203 & 7C9204
GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMPS

7E-0572 GOVERNOR GP

7E0572 GOVERNOR GP-PART 1 OF 2
S/N 38S13549-UP
PART OF 7C9203 & 7C9204 PUMPS-GOVERNOR & FUEL INJECTION FUEL TRANSFER

7E-0572 GOVERNOR GP

7E0572 GOVERNOR GP-PART 2 OF 2
S/N 38S13549-UP
4W7374-PAGE 384
PART OF 7C9203 & 7C9204 PUMPS-GOVERNOR & FUEL INJECTION & FUEL TRANSFER

7N-6127 GOVERNOR GP

7N6127 GOVERNOR GP-PART 1 OF 2
PART OF 8N8969 PUMP

7N-6127 GOVERNOR GP

7N6127 GOVERNOR GP-PART 2 OF 2
9N3684-PAGE 382
PART OF 8N8969 PUMP

4W-7181 GOVERNOR GP

4W7181 GOVERNOR GP-PART 1 OF 2
TYPE 1-S/N 38S13313-UP
PART OF 4W8297 PUMP

4W-7181 GOVERNOR GP

4W7181 GOVERNOR GP-PART 2 OF 2
TYPE 1-S/N 38S13313-UP
4W7374-PAGE 384
PART OF 4W8297 PUMP

4W-7181 GOVERNOR GP

4W7181 GOVERNOR GP-PART 1 OF 2
TYPE 2-S/N 38S13313-UP
PART OF 4W8297 PUMP

4W-7181 GOVERNOR GP

4W7181 GOVERNOR GP-PART 2 OF 2
TYPE 2-S/N 38S13313-UP
4W7374-PAGE 384
PART OF 4W8297 PUMP

4W-7181 GOVERNOR GP

4W7181 GOVERNOR GP-PART 1 OF 2
TYPE 3. S/N 38S13313-UP
PART OF 4W8297 PUMP GOVERNOR

4W-7181 GOVERNOR GP

4W7181 GOVERNOR GP-PART 2 OF 2
TYPE 3. S/N 38S13313-UP
4W7374-PAGE 384
PART OF 4W8297 PUMP GOVERNOR

4W-6017 GOVERNOR GP

4W6017 GOVERNOR GP-PART 1 OF 2
TYPE 1
PART OF 6I0868 PUMP-GOVERNOR
AN ATTACHMENT

4W-6017 GOVERNOR GP

4W6017 GOVERNOR GP-PART 2 OF 2
TYPE 1
4W6016-PAGE 384.01 & 7N6535-PAGE 384.04
PART OF 6I0868 PUMP-GOVERNOR. AN ATTACHMENT

4W-6017 GOVERNOR GP

4W6017 GOVERNOR GP-PART 1 OF 2
TYPE 2
PART OF 6I0868 PUMP-GOVERNOR
AN ATTACHMENT

4W-6017 GOVERNOR GP

4W6017 GOVERNOR GP-PART 2 OF 2
TYPE 2
4W6016-PAGE 384.01 & 7N6535-PAGE 384.04
PART OF 6I0868 PUMP-GOVERNOR
AN ATTACHMENT

8N-2367 GOVERNOR GP-WOODWARD

8N2367 GOVERNOR GP-WOODWARD
PART OF 8N2154 GOVERNOR
AN ATTACHMENT

7W-1995 KIT-ANTISTALL GOVERNOR

7W1995 GOVERNOR KIT-ANTI-STALL
FOR USE WITH 7W1994 GOVERNOR
FIELD INSTALLATION

7N-4686 COVER GP-SERVICE METER

7N4686 COVER GP-FUEL SYSTEM

7N-8472 PLATE GP-GOVERNOR ADAPTER

7N8472 PLATE GP-GOVERNOR ADAPTER
PART OF 4W8678 GOVERNOR

9N-3684 PLATE GP-GOVERNOR ADAPTER

9N3684 PLATE GP-GOVERNOR ADAPTER
TYPE 1
6N1947-PAGE 388
PART OF 7N6271 AND 7N6127 GOVERNORS

9N-3684 PLATE GP-GOVERNOR ADAPTER

9N3684 PLATE GP-GOVERNOR ADAPTER
TYPE 2
6N1947-PAGE 388
PART OF 7N6271 AND 7N6127 GOVERNORS

4W-7374 PLATE GP-GOVERNOR ADAPTER

4W7374 PLATE GP-GOVERNOR ADAPTER
6N1947-PAGE 388. TYPE 1
PART OF 4W6013, 4W7181 & 7E0572 GOVERNORS

4W-7374 PLATE GP-GOVERNOR ADAPTER

4W7374 PLATE GP-GOVERNOR ADAPTER
TYPE 2
PART OF 4W6013, 4W7181, 7E0572 GOVERNOR

4W-6016 PLATE GP-GOVERNOR ADAPTER

4W6016 PLATE GP-GOVERNOR ADAPTER
TYPE 1
PART OF 4W6017 GOVERNOR
AN ATTACHMENT

4W-6016 PLATE GP-GOVERNOR ADAPTER

4W6016 PLATE GP-GOVERNOR ADAPTER
TYPE 2
6N1947-PAGE 388
PART OF 4W6017 GOVERNOR
AN ATTACHMENT

4W-6016 PLATE GP-GOVERNOR ADAPTER

4W6016 PLATE GP-GOVERNOR ADAPTER
TYPE 3
6N1947-PAGE 388
PART OF 4W6017 GOVERNOR
AN ATTACHMENT

7N-6535 ADAPTER GP-GOVERNOR

7N6535 ADAPTER GP-GOVERNOR
PART OF 4W6017 GOVERNOR
AN ATTACHMENT

6N-1656 DRIVE GP-GOVERNOR

6N1656 DRIVE GP-GOVERNOR
TYPE 1
PART OF 7N1252, 1W2191, 4W8766 & 4W6074 PUMPS
4W8195 & 8N3104 CONVERSIONS

6N-1656 DRIVE GP-GOVERNOR

6N1656 DRIVE GP-GOVERNOR
TYPE 2
PART OF 7N1252, 1W2191, 4W6074 PUMPS AND 4W8195, 8N3104 CONVERSION

1N-4932 DRIVE GP-GOVERNOR

1N4932 DRIVE GP-GOVERNOR
PART OF 2W9124 AND 2W9123 CONVERSIONS
AN ATTACHMENT

6N-1947 PISTON GP-GOVERNOR SERVO

6N1947 PISTON GP-GOVERNOR SERVO
PART OF 9N3684, 4W7374, 4W6016 PLATES
AN ATTACHMENT

1N-5331 CONTROL GP-GOVERNOR

1N5331 CONTROL GP-GOVERNOR
AN ATTACHMENT

3N-8146 CONTROL GP-GOVERNOR

3N8146 CONTROL GP-GOVERNOR
AIR ACTUATED
5N3220-PAGE 408
AN ATTACHMENT

3N-9473 CONTROL GP-GOVERNOR

3N9473 CONTROL GP-GOVERNOR
AIR ACTUATED
5N3220-PAGE 408
NOT FOR USE WITH WATERCOOLED TURBOCHARGER OR ANY SINGLE
TURBOCHARGER. AN ATTACHMENT

3N-8029 CONTROL GP-GOVERNOR

3N8029 CONTROL GP-GOVERNOR
AIR ACTUATED
5N3220-PAGE 408
FOR USE WITH AFTERCOOLED ENGINE ONLY
AN ATTACHMENT

8N-2365 CONTROL GP-GOVERNOR

8N2365 CONTROL GP-GOVERNOR
TYPE 1-R.H. OR L.H. MOUNTED
4N3828-PAGE 400
AN ATTACHMENT

8N-2365 CONTROL GP-GOVERNOR

8N2365 CONTROL GP-GOVERNOR
TYPE 2-R.H. OR L.H. MOUNTED
4N3828-PAGE 400
AN ATTACHMENT

6N-2844 CONTROL GP-GOVERNOR

6N2844 CONTROL GP-GOVERNOR
POSITIVE LOCK-R.H.
4N3830-PAGE 401
AN ATTACHMENT

3N-7741 CONTROL GP-GOVERNOR

3N7741 CONTROL GP-GOVERNOR
PROVIDES MULTI-HOLE GOVERNOR CONTROL
AN ATTACHMENT

6N-2846 CONTROL GP-GOVERNOR

6N2846 CONTROL GP-GOVERNOR
REMOTE & POSITIVE LOCK-R.H.
4N3828-PAGE 400
AN ATTACHMENT

6N-2845 CONTROL GP-GOVERNOR

6N2845 CONTROL GP-GOVERNOR
VERNIER & POSITIVE LOCK-L.H.
4N3829-PAGE 400
AN ATTACHMENT

7W-6542 CONTROL GP-GOVERNOR

7W6542 CONTROL GP-GOVERNOR
TYPE 2. 1315454-PAGE 398.01
WOODWARD 2301 LOADSHARING
AN ATTACHMENT

7W-6542 CONTROL GP-GOVERNOR

7W6542 CONTROL GP-GOVERNOR
TYPE 1.
WOODWARD 2301 LOADSHARING
AN ATTACHMENT

131-5454 CONTROL AS-GOVERNOR

1315454 CONTROL AS-GOVERNOR
PART OF 7W6542 CONTROL-GOVERNOR
AN ATTACHMENT

7W-6543 CONTROL GP-GOVERNOR

7W6543 CONTROL GP-GOVERNOR
WOODWARD-2301 STANDBY
AN ATTACHMENT

8N-1731 CONTROL GP-GOVERNOR

8N1731 CONTROL GP-GOVERNOR
REPLACED BY 7W6543-PAGE 398. WOODWARD 2301 STANDBY
AN ATTACHMENT

8N-1730 CONTROL GP-GOVERNOR

8N1730 CONTROL GP-GOVERNOR
REPLACED BY 7W6542-PAGE 398. WOODWARD 2301 LOAD SHARING
AN ATTACHMENT

4N-3829 CONTROL GP-GOVERNOR

4N3829 CONTROL GP-GOVERNOR
POSITIVE LOCK & VERNIER
PART OF 6N2845 & 5N6484 CONTROLS
AN ATTACHMENT

4N-3828 CONTROL GP-GOVERNOR

4N3828 CONTROL GP-GOVERNOR
REMOTE & POSITIVE LOCKING
PART OF 8N2365 & 6N2846 CONTROLS
AN ATTACHMENT

4N-3830 CONTROL GP-GOVERNOR

4N3830 CONTROL GP-GOVERNOR
POSITIVE LOCKING
PART OF 6N2844 CONTROL
AN ATTACHMENT

7N-7457 CONTROL GP-GOVERNOR

7N7457 CONTROL GP-GOVERNOR
PART OF 1W8685 CONTROL
AN ATTACHMENT

1W-8685 CONTROL GP-GOVERNOR

1W8685 CONTROL GP-GOVERNOR
BREAK-OVER
7N7457-PAGE 402
AN ATTACHMENT

8N-2177 CONTROL GP-GOVERNOR

8N2177 CONTROL GP-GOVERNOR
PROVIDES A THREE HOLE GOVERNOR CONTROL LEVER
AN ATTACHMENT

5N-6484 CONTROL GP-GOVERNOR

5N6484 CONTROL GP-GOVERNOR
VERNIER & POSITIVE LOCK
4N3829-PAGE 400
AN ATTACHMENT

5R-6271 CONTROL GP-GOVERNOR

5R6271 CONTROL GP-GOVERNOR
PROVIDES AN 8 NOTCH SPEED CONTROL FOR LOCOMOTIVE USE
AN ATTACHMENT

108-0136 CONTROL GP-GOVERNOR

1080136 CONTROL GP-GOVERNOR
AN ATTACHMENT

4P-6875 CONTROL GP-GOVERNOR

4P6875 CONTROL GP-GOVERNOR
AN ATTACHMENT

4P-6826 CONTROL GP-GOVERNOR

4P6826 CONTROL GP-GOVERNOR
PART OF 4P6875 CONTROL-GOVERNOR

4W-8195 CONVERSION GP-GOVERNOR

4W8195 CONVERSION GP-GOVERNOR-PART 1 OF 2
6N1656-PAGE 385, 8N3099-PAGE 412
FIELD INSTALLATION

4W-8195 CONVERSION GP-GOVERNOR

4W8195 CONVERSION GP-GOVERNOR-PART 2 OF 2
8N6670-PAGE 408
FIELD INSTALLATION

2W-9321 CONVERSION GP-GOVERNOR

2W9321 CONVERSION GP-GOVERNOR
DIT-OUTPUT SHAFT
AN ATTACHMENT

2W-9320 CONVERSION GP-GOVERNOR

2W9320 CONVERSION GP-GOVERNOR
DITA-OUTPUT SHAFT
AN ATTACHMENT

2W-9293 CONVERSION GP-GOVERNOR

2W9293 CONVERSION GP-GOVERNOR
WOODWARD-PSG-LOW SPEED-FOR USE WITH 3412 INDUSTRIAL DIRECT INJ.
TURBOCHARGED AFTERCOOLED (LOW VOLUME FUEL SYSTEM) ENGINE ARS.
WITH EITHER WATER-COOLED OR DRY EXHAUST MANIFOLDS. AN ATTACHMENT

2W-9294 CONVERSION GP-GOVERNOR

2W9294 CONVERSION GP-GOVERNOR
WOODWARD-DIT
AN ATTACHMENT

8N-6951 GOVERNOR GP

8N6951 GOVERNOR GP-WOODWARD PSG-24 VOLT
TYPE 1
4W6811-PAGE 410.01. PART OF 8N3104, 2W9294 & 2W9293 CONVERSIONS
AN ATTACHMENT

1W-1637 GOVERNOR GP

1W1637 GOVERNOR GP
WOODWARD
4W6811-PAGE 410.01
PART OF 8N3104 GOVERNOR. FIELD INSTALLATION

8N-6951 GOVERNOR GP

8N6951 GOVERNOR GP-WOODWARD PSG-24 VOLE MOTOR
TYPE 2
6I1098-PAGE 411.01. PART OF 8N3104 CONVERSION GP
AN ATTACHMENT

4W-6811 GOVERNOR GP

4W6811 GOVERNOR GP-WOODWARD
TYPE 1
PART OF 1W1637 & 8N6951 GOVERNORS-WOODWARD

4W-6811 GOVERNOR GP

4W6811 GOVERNOR GP-WOODWARD-PART 1 OF 2
TYPE 2
PART OF 8N6951 & 1W1637 GOVERNORS-WOODWARD

4W-6811 GOVERNOR GP

4W6811 GOVERNOR GP-PART 2 OF 2
TYPE 2
PART OF 8N6951 & 1W1637 GOVERNORS-WOODWARD

6I-1098 GOVERNOR GP

6I1098 GOVERNOR GP
PART OF 8N6951 GOVERNOR

8N-3099 FASTENER GP-GOVERNOR

8N3099 FASTENER GP-WOODWARD GOVERNOR
PART OF 4W8195 CONVERSION
NOTE: 7N9870 ACTUATOR AS IS AVAILABLE
FIELD INSTALLATION

6N-4703 FASTENER GP-WOODWARD GOVERNOR

6N4703 FASTENER GP-WOODWARD
FOR MOUNTING EG3P ACTUATOR
NOTE: 7W6122 ACTUATOR (MULTI-VISCOSITY OIL) OR
7W6653 ACTUATOR (STRAIGHT OIL) IS USED. AN ATTACHMENT

4N-9792 FASTENER GP-WOODWARD GOVERNOR

4N9792 FASTENER GP-WOODWARD GOVERNOR
PART OF 2W9294, 2W9293 AND 8N3104 CONVERSIONS
AN ATTACHMENT

8N-3104 CONVERSION GP-GOVERNOR

8N3104 CONVERSION GP-WOODWARD GOVERNOR-PART 1 OF 2
TYPE 1
6N1656-PAGE 385, 1W1637-PAGE 409, 4N9792-PAGE 413.02
FIELD INSTALLATION

8N-3104 CONVERSION GP-GOVERNOR

8N3104 CONVERSION GP-WOODWARD GOVERNOR-PART 2 OF 2
TYPE 1
8N6670-PAGE 408
FIELD INSTALLATION

8N-3104 CONVERSION GP-GOVERNOR

8N3104 CONVERSION GP-WOODWARD GOVERNOR-PART 1 OF 2
TYPE 2
6N1656-PAGE 385, 8N6951-PAGE 409, 4N9792-PAGE 413.02
FIELD INSTALLATION

8N-3104 CONVERSION GP-GOVERNOR

8N3104 CONVERSION GP-WOODWARD GOVERNOR-PART 2 OF 2
TYPE 2
8N6670-PAGE 408
FIELD INSTALLATION

1W-5889 CONTROL GP-FUEL RATIO

1W5889 CONTROL GP-FUEL RATIO
2W6808-PAGE 419. TYPE 1
AN ATTACHMENT

6N-6209 CONTROL GP-FUEL RATIO

6N6209 CONTROL GP-FUEL RATIO
FOR DIRECT INJECTION TURBOCHARGED ENGINE
2W3157-PAGE 421
AN ATTACHMENT

1W-5889 CONTROL GP-FUEL RATIO

1W5889 CONTROL GP-FUEL RATIO
2W3157-PAGE 418.02. TYPE 2
AN ATTACHMENT

2W-3157 CONTROL GP-FUEL RATIO

2W3157 CONTROL GP-FUEL RATIO*R
PART OF 1W5889 CONTROL-FUEL
AN ATTACHMENT

2W-6808 CONTROL GP-FUEL RATIO

2W6808 CONTROL GP-FUEL RATIO
PART OF 1W5889 CONTROL
AN ATTACHMENT

7N-9250 CONTROL GP-FUEL RATIO

7N9250 CONTROL GP-FUEL RATIO
FOR PRECOMBUSTION CHAMBERED TURBOCHARGED AFTERCOOLED ENGINE
7N5486-PAGE 422
AN ATTACHMENT

2W-3157 CONTROL GP-FUEL RATIO

2W3157 CONTROL GP-FUEL RATIO*R
TYPE 1
PART OF 6N6209 CONTROL-FUEL RATIO
AN ATTACHMENT

2W-3157 CONTROL GP-FUEL RATIO

2W3157 CONTROL GP-FUEL RATIO*R
TYPE 2
PART OF 6N6209 CONTROL-FUEL RATIO
AN ATTACHMENT

7N-5486 CONTROL GP-FUEL RATIO

7N5486 CONTROL GP-FUEL RATIO*R
PART OF 7N9250 CONTROL
AN ATTACHMENT

LINES GP-FUEL

7W-1077 LINES GP-FUEL FILTER

7W1077 LINES GP-FUEL FILTER

6N-2021 LINES GP-FUEL FILTER

6N2021 LINES GP-FUEL FILTER

8N-1634 LINES GP-FUEL FILTER

8N1634 LINES GP-FUEL FILTER-PART 1 OF 2
DUPLEX-L.H.
AN ATTACHMENT

8N-1634 LINES GP-FUEL FILTER

8N1634 LINES GP-FUEL FILTER-PART 2 OF 2
DUPLEX-L.H.
AN ATTACHMENT

7N-2637 LINES GP-FUEL FILTER

7N2637 LINES GP-FUEL FILTER-PART 1 OF 2
DUPLEX-R.H.
FOR USE WITH SAE #1 FLYWHEEL HOUSING
AN ATTACHMENT

7N-2637 LINES GP-FUEL FILTER

7N2637 LINES GP-FUEL FILTER-PART 2 OF 2
DUPLEX-R.H.
FOR USE WITH SAE #1 FLYWHEEL HOUSING
AN ATTACHMENT

7W-1080 LINES GP-FUEL FILTER

7W1080 LINES GP-FUEL FILTER-PART 1 OF 2
S/N 38S13313-UP
FOR USE WITH 7N1830 FASTENER GP, 7W1077 & 8N2570 LINES GPS
AN ATTACHMENT

7W-1080 LINES GP-FUEL FILTER

7W1080 LINES GP-FUEL FILTER-PART 2 OF 2
S/N 38S13313-UP
FOR USE WITH 7N1830 FASTENER GP, 7W1077 & 8N2570 LINES GPS
AN ATTACHMENT

1W-0298 LINES GP-FUEL FILTER

1W0298 LINES GP-FUEL FILTER
S/N 38S13236-13315

7W-1086 LINES GP-FUEL FILTER

7W1086 LINES GP-FUEL FILTER-RH
S/N 38S13316-UP

2W-3689 LINES GP-FUEL FILTER

2W3689 LINES GP-FUEL FILTER-PART 1 OF 2
L.H.
FOR USE WITH #1 FLYWHEEL HOUSING
AN ATTACHMENT

2W-3689 LINES GP-FUEL FILTER

2W3689 LINES GP-FUEL FILTER-PART 2 OF 2
L.H.
FOR USE WITH #1 FLYWHEEL HOUSING
AN ATTACHMENT

6N-4609 LINES GP-FUEL FILTER

6N4609 LINES GP-FUEL FILTER
L.H. MOUNTING
FOR USE WITH WATERCOOLED EXHAUST MANIFOLD
AN ATTACHMENT

7N-2776 LINES GP-FUEL FILTER

7N2776 LINES GP-FUEL FILTER
L.H. MOUNTING
FOR USE WITH SAE #0 FLYWHEEL HOUSING
PART OF 8N2570 LINES-FUEL FILTER. AN ATTACHMENT

2W-3205 LINES GP-FUEL FILTER

2W3205 LINES GP-FUEL FILTER-RH
#1 FLYWHEEL HOUSING
S/N 38S13304-13890

2W-3205 LINES GP-FUEL FILTER

2W3205 LINES GP-FUEL FILTER-RH
#1 FLYWHEEL HOUSING
S/N 38S13891-UP

8N-2570 LINES AR-FUEL FILTER

8N2570 LINES AR-FUEL FILTER
L.H.-SAE #0 FLYWHEEL HOUSING
FOR USE WITH HOT EXHAUST MANIFOLD
AN ATTACHMENT

7W-0404 LINES GP-FUEL INJECTION

7W0404 LINES GP-FUEL INJECTION-DIRECT INJECTION
S/N 38S13236-13481

7W-0404 LINES GP-FUEL INJECTION

7W0404 LINES GP-FUEL INJECTION-DIRECT INJECTION
S/N 38S13482-UP
4W7020-PAGE 328

4N-2507 LINES GP-FUEL INJECTION

4N2507 LINES GP-FUEL INJECTION
FOR DIRECT INJECTION TURBOCHARGED ENGINE

8N-4200 LINES GP-FUEL INJECTION

8N4200 LINES GP-FUEL INJECTION

2W-8065 LINES GP-FUEL INJECTION

2W8065 LINES GP-FUEL INJECTION
S/N 38S13236-13481
4W7018-PAGE 327.04

2W-8065 LINES GP-FUEL INJECTION

2W8065 LINES GP-FUEL INJECTION
S/N 38S13482-13771
4W7018-PAGE 327.04

2W-8065 LINES GP-FUEL INJECTION

2W8065 LINES GP-FUEL INJECTION
S/N 38S13772-15411
7C6299-PAGE 325.02, 7C6300-PAGE 327.03, 4W7018-PAGE 327.04

2W-8065 LINES GP-FUEL INJECTION

2W8065 LINES GP-FUEL INJECTION
S/N 38S15412-15648
7C6299-PAGE 325.02, 7C6300-PAGE 327.03, 4W7018-PAGE 327.04

2W-8065 LINES GP-FUEL INJECTION

2W8065 LINES GP-FUEL INJECTION
S/N 38S15649-UP
4W7018-PAGE 327.04, 6I0349-PAGE 325.04, 6I0350-PAGE 327.03.02

5N-5340 LINES GP-FUEL INJECTION

5N5340 LINES GP-FUEL INJECTION
AN ATTACHMENT

7W-0128 LINES GP-FUEL INJECTION

7W0128 LINES GP-FUEL INJECTION
TYPE 1
DOUBLE WALLED
AN ATTACHMENT

7W-0128 LINES GP-FUEL INJECTION

7W0128 LINES GP-FUEL INJECTION
TYPE 2
DOUBLE WALLED
AN ATTACHMENT

7C-6299 LINES GP-FUEL INJECTION

7C6299 LINES GP-FUEL INJECTION
TYPE 1. S/N 38S13772-15648
PART OF 2W8065 & 4W9008 LINES-FUEL INJECTION

7C-6299 LINES GP-FUEL INJECTION

7C6299 LINES GP-FUEL INJECTION
TYPE 2. S/N 38S13772-15648
PART OF 2W8065 & 4W9008 LINES-FUEL INJECTION

6I-0349 LINES GP-FUEL INJECTION

6I0349 LINES GP-FUEL INJECTION
S/N 38S15649-UP
PART OF 2W8065, 4W9008 LINES-FUEL INJECTION

2W-3537 LINES GP-FUEL INJECTION

2W3537 LINES GP-FUEL INJECTION
DOUBLE WALLED
FOR USE WITH DIRECT INJECTION TURBOCHARGED AFTERCOOLED ENGINE WITH
RATING ABOVE 1300 RPM. MUST BE USED IN CONJUNCTION WITH 2W5100 DRAIN
GP. CANNOT BE USED WITH 3N8029 GOVERNOR GP. AN ATTACHMENT

4W-9008 LINES GP-FUEL INJECTION

4W9008 LINES GP-FUEL INJECTION
S/N 38S13236-13481

4W-9008 LINES GP-FUEL INJECTION

4W9008 LINES GP-FUEL INJECTION
S/N 38S13482-13771

4W-9008 LINES GP-FUEL INJECTION

4W9008 LINES GP-FUEL INJECTION
S/N 38S13772-15411
7C6299-PAGE 325.02 & 7C6300-PAGE 327.03

4W-9008 LINES GP-FUEL INJECTION

4W9008 LINES GP-FUEL INJECTION
S/N 38S15412-15648
7C6299-PAGE 325.02 & 7C6300-PAGE 327.03

4W-9008 LINES GP-FUEL INJECTION

4W9008 LINES GP-FUEL INJECTION
S/N 3815649-UP
6I0349-PAGE 325.04, 6I0350-PAGE 327.03.02

7C-6300 LINES GP-FUEL INJECTION

7C6300 LINES GP-FUEL INJECTION
TYPE 1. S/N 38S13772-15648
PART OF 2W8065 & 4W9008 LINES-FUEL INJECTION

7C-6300 LINES GP-FUEL INJECTION

7C6300 LINES GP-FUEL INJECTION
TYPE 2. S/N 38S13772-15648
PART OF 2W8065 & 4W9008 LINES-FUEL INJECTION

6I-0350 LINES GP-FUEL INJECTION

6I0350 LINES GP-FUEL INJECTION
S/N 38S15649-16395
PART OF 2W8065, 4W9008 LINES-FUEL INJECTION

6I-0350 LINES GP-FUEL INJECTION

6I0350 LINES GP-FUEL INJECTION
S/N 38S16396-UP
PART OF 2W8065, 4W9008 LINES-FUEL INJECTION

2W-5100 DRAIN GP-FUEL

2W5100 DRAIN GP-FUEL
L.H.-LINES & ALARM SWITCH
CANNOT BE INSTALLED ON ENGINES WHEN L.H. PREMIUM INSTRUMENT
PANEL & L.H. DUPLEX OIL FILTER SYSTEMS ARE BOTH REQUIRED
AN ATTACHMNT

3N-6668 LINES GP-FLEXIBLE FUEL

3N6668 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT

6N-5140 FASTENER GP-FUEL INJ LINES

6N5140 FASTENER GP-FUEL INJECTION LINES
FOR DIRECT INJECTION TURBOCHARGED

2W-0748 VALVE GP-FUEL

2W0748 VALVE GP-FUEL INJECTION
PROVIDES A FUEL NOZZLE FOR CONVERSION OF 3400 DITA
ENGINES TO FIRE PUMP RATINGS. AN ATTACHMENT

PUMP GP-FUEL INJECTION

4W-7018 NOZZLE AS-FUEL VALVE

4W7018 NOZZLE AS-FUEL VALVE*R
8 REQUIRED. FOR USE WITH 4W9125 & 4W9127 ENG ARS
PART OF 2W8065 LINES-FUEL INJECTION

4W-7020 NOZZLE AS-FUEL VALVE

4W7020 NOZZLE AS-FUEL VALVE*R
PART OF 7W0404 LINES-FUEL INJECTION
AN ATTACHMENT

8N-8996 DRIVE GP-GOVERNOR & FUEL PUMP

8N8996 DRIVE GP-GOVERNOR & FUEL PUMP

6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP

6N3195 DRIVE GP-GOVERNOR & FUEL PUMP
FOR DIRECT INJECTION TURBOCHARGED

9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP

9N3959 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 38S13316-UP

2W-3986 DRIVE GP-GOVERNOR & FUEL PUMP

2W3986 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 38S13313-15099

7N-8232 PUMP GP-GOV, FUEL INJ & TFR

7N8232 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 7N7577-PAGE 354, 7N6271-PAGE 372 & 4N4267-PAGE 390

8N-9232 PUMP GP-GOV, FUEL INJ & TFR

8N9232 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 7N6390-PAGE 356, 7N6271-PAGE 372 & 6N1636-PAGE 390
AN ATTACHMENT

8N-8969 PUMP GP-GOV, FUEL INJ & TFR

8N8969 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
FOR DIRECT INJECTION TURBOCHARGED
4N1101-PAGE 349, 7N7577-PAGE 354, 7N6127-PAGE 376 & 4N4267-PAGE 390

4W-6069 PUMP GP-GOV, FUEL INJ & TFR

4W6069 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
4N1101-PAGE 349, 4W6068-PAGE 358, 4W6013-PAGE 374,
4N4267-PAGE 390 & 9Y3336-PAGE 351

2W-8457 PUMP GP-GOV, FUEL INJ & TFR

2W8457 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 7N6390-PAGE 356, 7N6271-PAGE 372 & 4N4267-PAGE 390

4W-8617 PUMP GP-GOV, FUEL INJ & TFR

4W8617 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
4N1101-PAGE 349, 4W6068-PAGE 358, 4W6013-PAGE 374,
4N4267-PAGE 390 & 9Y3336-PAGE 351

4W-8679 PUMP GP-GOV, FUEL INJ & TFR

4W8679 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
4N1101-PAGE 349, 4W8680-PAGE 364, 4W8678-PAGE 370,
6N1636-PAGE 390 & 9Y3336-PAGE 351

4W-8929 PUMP GP-GOV, FUEL INJ & TFR

4W8929 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
4N1101-PAGE 349, 4W6068-PAGE 358, 4W6013-PAGE 374,
4N4267-PAGE 390 & 9Y3336-PAGE 351

4W-8297 PUMP GP-GOV, FUEL INJ & TFR

4W8297 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
S/N 38S13313-UP
4N1101-PAGE 349, 4W6068-PAGE 358, 4W7181-PAGE 378,
4N4267-PAGE 390 & 9Y3336-PAGE 351

2W-9124 PUMP GP-GOV DRV,FUEL INJ & TFR

2W9124 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 7N1251-PAGE 352 AND 1N4932-PAGE 387
PART OF 2W9321 CONVERSION. AN ATTACHMENT

8N-8970 PUMP GP-GOV, FUEL INJ & TFR

8N8970 PUMP GP-GOVERNOR, FUEL INJECTION & TRANSFER
4W4627-PAGE 390, 4N1101-PAGE 348, 7W6126-PAGE 345.05
AN ATTACMENT

7N-1252 PUMP GP-GOV DRV,FUEL INJ & TFR

7N1252 GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER PUMP GP
TYPE 1
4N1101-PAGE 349, 7N1251-PAGE 352 AND 6N1656-PAGE 385. PART OF
2W9294 CONVERSION. FOR DIRECT INJECTION TURBOCHARGED ISOCHRONOUS
DERATED & MARINE VERSION GENERATOR SETS. AN ATTACHMENT

7N-1252 PUMP GP-GOV DRV,FUEL INJ & TFR

7N1252 GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER PUMP GP
TYPE 2. REPLACED BY 4W6074-PAGE 345.01
4N1101-PAGE 349, 7N1251-PAGE 352 AND 6N1656-PAGE 385. PART OF
2W9294 CONVERSION. FOR DIRECT INJECTION TURBOCHARGED ISOCHRONOUS
DERATED & MARINE VERSION GENERATOR SETS. AN ATTACHMENT

4W-6074 PUMP GP-GOV DRV,FUEL INJ & TFR

4W6074 PUMP GP-GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER
4W6073-PAGE 345.03, 4N1101-PAGE 349, 6N1656-PAGE 385
PART OF 2W9294 CONVERSION-GOVERNOR
ALSO AN ATTACHMENT

4W-6073 PUMP GP-FUEL INJECTION

4W6073 PUMP GP-FUEL INJECTION-PART 1 OF 2
4N2117-PAGE 368, 7W0561-PAGE 350
PART OF 4W6074 PUMP-GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER
AN ATTACHMENT

4W-6073 PUMP GP-FUEL INJECTION

4W6073 PUMP GP-FUEL INJECTION-PART 2 OF 2
PART OF 4W6074 PUMP-GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER
AN ATTACHMENT

7N-6126 PUMP GP-FUEL INJECTION

7N6126 PUMP GP-FUEL INJECTION-PART 1 OF 2

7N-6126 PUMP GP-FUEL INJECTION

7N6126 PUMP GP-FUEL INJECTION-PART 2 OF 2
7N6124-PAGE 367, 6N1043-

1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR

1W2191 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
TYPE 1
4N1101-PAGE 349, 1W0945-PAGE 362 AND 6N1656-PAGE 385
PART OF 2W9293 CONVERSION. AN ATTACHMENT

1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR

1W2191 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
TYPE 2
4N1101-PAGE 349, 1W0945-PAGE 362 AND 6N1656-PAGE 385
PART OF 2W9293 CONVERSION. AN ATTACHMENT

4W-8766 PUMP GP-GOV, FUEL INJ & TFR

4W8766 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
4N1101-PAGE 349, 6N1656-PAGE 385 & 4W8765-PAGE 363.01
PART OF 2W9293 CONVERSION
AN ATTACHMENT

2W-9123 PUMP GP-GOV DRV,FUEL INJ & TFR

2W9123 GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 1W0945-PAGE 362 AND 1N4932-PAGE 387
PART OF 2W9320 CONVERSION. AN ATTACHMENT

7C-9204 PUMP GP-GOV, FUEL INJ & TFR

7C9204 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
TYPE 1. S/N 38S13549-UP
4N1101-PAGE 349, 9Y3336-PAGE 351, 4W6068-PAGE 358,
4W6013-PAGE 374 & 4N4267-PAGE 390

7C-9204 PUMP GP-GOV, FUEL INJ & TFR

7C9204 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
TYPE 2. S/N 38S13549-UP
4N1101-PAGE 349, 7E0572-PAGE 375.03, 4N4267-PAGE 390,
4W6068-PAGE 358 & 9Y3336-PAGE 351

7C-9203 PUMP GP-GOV, FUEL INJ & TFR

7C9203 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
TYPE 1. S/N 38S13550-UP
4N1101-PAGE 349, 9Y3336-PAGE 351, 4W6068-PAGE 358,
4W6013-PAGE 374 & 4N4267-PAGE 390

7C-9203 PUMP GP-GOV, FUEL INJ & TFR

7C9203 PUMP GP-GOVERNOR,FUEL INJECTION & FUEL TRANSFER
TYPE 2. S/N 38S13550-UP
4N1101-PAGE 349, 7E0572-PAGE 375.03, 4N4267-PAGE 390
4W6068-PAGE 358, 9Y3336-PAGE 351

6I-0868 PUMP GP-GOV, FUEL INJ & TFR

6I0868 PUMP GP-GOVERNOR, FUEL INJECTION, FUEL TANSFER
9Y3336-PAGE 351, 4N1101-PAGE 349, 4W6017-PAGE 379.05
9Y6797-PAGE 391, 4W6068-PAGE 360
AN ATTACHMENT

7W-0561 PUMP GP-FUEL INJECTION

7W0561 PUMP GP-FUEL INJECTION
PART OF 4W6068, 4W8680, 4W8765, 4W6073 PUMPS

6N-7829 PUMP GP-FUEL INJECTION

6N7829 PUMP GP-FUEL INJECTION
PART OF 7N6390 AND 1W0945 PUMPS-FUEL INJECTION

7N-1251 PUMP GP-FUEL INJECTION

7N1251 PUMP GP-FUEL INJECTION-PART 1 OF 2
7N1185-PAGE 361, 4N2117-PAGE 368. PART OF 2W9124 & 7N1252
PUMPS. FOR DIRECT INJECTION TURBOCHARGED GENERATOR SETS
WITH ISOCHRONOUS GOVERNOR. AN ATTACHMENT

7N-1251 PUMP GP-FUEL INJECTION

7N1251 PUMP GP-FUEL INJECTION-PART 2 OF 2
PART OF 2W9124 & 7N1252 PUMPS
FOR DIRECT INJECTION TURBOCHARGED GENERATOR SETS WITH
ISOCHRONOUS GOVERNOR. AN ATTACHMENT

7N-7577 PUMP GP-FUEL INJECTION

7N7577 PUMP GP-FUEL INJECTION-PART 1 OF 2
PART OF 7N8232 AND 8N8969 PUMPS

7N-7577 PUMP GP-FUEL INJECTION

7N7577 PUMP GP-FUEL INJECTION-PART 2 OF 2
7N1185-PAGE 361 AND 7N6124-PAGE 367
PART OF 7N8232 AND 8N8969 PUMPS

7N-6390 PUMP GP-FUEL INJECTION

7N6390 PUMP GP-FUEL INJECTION-PART 1 OF 2
PART OF 8N9232 AND 2W8457 PUMPS

7N-6390 PUMP GP-FUEL INJECTION

7N6390 PUMP GP-FUEL INJECTION-PART 2 OF 2
6N7829-PAGE 351 AND 7N6124-PAGE 367
PART OF 8N9232 AND 2W8457 PUMPS

4W-6068 PUMP GP-FUEL INJECTION

4W6068 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 1
PART OF 4W6069, 4W8617, 4W8929, 4W8297, 7C9203 & 7C9204 PUMPS

4W-6068 PUMP GP-FUEL INJECTION

4W6068 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 1
4W0101-PAGE 361, 7N6124-PAGE 367
PART OF 4W6069, 4W8617, 4W8929, 4W8297, 7C9203 & 7C9204 PUMPS

4W-6068 PUMP GP-FUEL INJECTION

4W6068 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 2
PART OF 4W6069, 4W8617, 4W8929, 4W8297, 7C9203,
7C9204 & 6I0868 PUMPS-GOVERNOR

4W-6068 PUMP GP-FUEL INJECTION

4W6068 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 2
7W0561-PAGE 350, 7N6124-PAGE 367
PART OF 4W6069, 4W8617, 4W8929, 4W8297, 7C9203,
7C9204 & 6I0868 PUMPS-GOVERNOR

7N-1185 PUMP GP-FUEL INJECTION

7N1185 PUMP GP-FUEL INJECTION
PART OF 7N1251, 7N7577 PUMPS

4W-0101 PUMP GP-FUEL INJECTION

4W0101 PUMP GP-FUEL INJECTION
PART OF 4W6068 AND 4W8680 PUMPS

1W-0945 PUMP GP-FUEL INJECTION

1W0945 PUMP GP-FUEL INJECTION-PART 1 OF 2
REPLACED BY 4W8765-PAGE 363.01
6N7829-PAGE 351, 4N2117-PAGE 368
PART OF 1W2191 AND 2W9123 PUMPS
AN ATTACHMENT

1W-0945 PUMP GP-FUEL INJECTION

1W0945 PUMP GP-FUEL INJECTION-PART 2 OF 2
REPLACED BY 4W8765-PAGE 363.01
PART OF 1W2191 AND 2W9123 PUMPS
AN ATTACHMENT

4W-8765 PUMP GP-FUEL INJECTION

4W8765 PUMP GP-FUEL INJECTION-PART 1 OF 2
DIRECT INJECTION
7W0561-PAGE 350 & 4N2117-PAGE 368
PART OF 4W8766 PUMP-GOVERNOR

4W-8765 PUMP GP-FUEL INJECTION

4W8765 PUMP GP-FUEL INJECTION-PART 2 OF 2
DIRECT INJECTION
PART OF 4W8766 PUMP-GOVERNOR

4W-8680 PUMP GP-FUEL INJECTION

4W8680 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 1-DIRECT INJECTION
PART OF 4W8679 PUMP

4W-8680 PUMP GP-FUEL INJECTION

4W8680 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 1-DIRECT INJECTION
4W0101-PAGE 361, 7N6124-PAGE 367
PART OF 4W8679 PUMP

4W-8680 PUMP GP-FUEL INJECTION

4W8680 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 2-DIRECT INJECTION
PART OF 4W8679 PUMP-FUEL INJECTION

4W-8680 PUMP GP-FUEL INJECTION

4W8680 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 2-DIRECT INJECTION
7W0561-PAGE 350, 7N6124-PAGE 367
PART OF 4W8679 PUMP-FUEL INJECTION

7N-6124 HOUSING AS-FUEL PUMP

7N6124 HOUSING AS-FUEL INJECTION PUMP
PART OF 7N7577, 7N6390, 4W6068, 4W8680, 7N6136 PUMPS

4N-2117 HOUSING AS-FUEL PUMP

4N2117 HOUSING AS-FUEL INJECTION PUMP
PART OF 7N1251, 1W0945, 4W8765 & 4W6073 PUMPS

PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING

4N3287 PUMP GP-FUEL PRIMING

PUMP GP-FUEL TRANSFER

2W-9124 PUMP GP-GOV DRV,FUEL INJ & TFR

2W9124 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 7N1251-PAGE 352 AND 1N4932-PAGE 387
PART OF 2W9321 CONVERSION. AN ATTACHMENT

7N-1252 PUMP GP-GOV DRV,FUEL INJ & TFR

4W-6074 PUMP GP-GOV DRV,FUEL INJ & TFR

4W6074 PUMP GP-GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER
4W6073-PAGE 345.03, 4N1101-PAGE 349, 6N1656-PAGE 385
PART OF 2W9294 CONVERSION-GOVERNOR
ALSO AN ATTACHMENT

1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR

1W2191 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
TYPE 1
4N1101-PAGE 349, 1W0945-PAGE 362 AND 6N1656-PAGE 385
PART OF 2W9293 CONVERSION. AN ATTACHMENT

1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR

1W2191 GOVERNOR, FUEL INJECTION & FUEL TRANSFER PUMP GP
TYPE 2
4N1101-PAGE 349, 1W0945-PAGE 362 AND 6N1656-PAGE 385
PART OF 2W9293 CONVERSION. AN ATTACHMENT

2W-9123 PUMP GP-GOV DRV,FUEL INJ & TFR

2W9123 GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 1W0945-PAGE 362 AND 1N4932-PAGE 387
PART OF 2W9320 CONVERSION. AN ATTACHMENT

4N-1101 PUMP GP-FUEL TRANSFER

4N1101 PUMP GP-FUEL TRANSFER
4W5477-PAGE 349.01. PART OF 7N8232, 8N9232, 8N8969, 4W6069, 2W8457,
4W8617, 4W8679, 4W8929, 4W8297, 2W9124, 7N1252, 2W9123, 7C9203,
7C9204, 4W8766, 4W6074, 1W2191, 6I0868, 8N8970 PUMPS

4W-5477 PUMP GP-FUEL TRANSFER

4W5477 PUMP GP-FUEL TRANSFER
PART OF 4N1101 PUMP-FUEL TRANSFER

PUMP GP-UNIT INJECTOR HYD

2W-0748 VALVE GP-FUEL

2W0748 VALVE GP-FUEL INJECTION
PROVIDES A FUEL NOZZLE FOR CONVERSION OF 3400 DITA
ENGINES TO FIRE PUMP RATINGS. AN ATTACHMENT

SHUTOFF GP

2W-6258 SHUTOFF GP-MANUAL

2W6258 SHUT-OFF GP-MANUAL
PART OF 7C7257, 5N4867 AND 7W6405 SWITCHES
AN ATTACHMENT

2N-2489 SHUTOFF GP-MANUAL

2N2489 SHUT-OFF GP-MANUAL
FOR USE WITH FUEL INJECTION PUMPS WITH SOLID LINK RACK DESIGN
AN ATTACHMENT

TORQUE CONTROL GP

9N-1070 TORQUE CONTROL GP

9N1070 TORQUE CONTROL GP
AN ATTACHMENT

6N-1636 TORQUE CONTROL GP

6N1636 TORQUE CONTROL GP
PART OF 8N9232 AND 4W8679 PUMPS
AN ATTACHMENT

4N-4267 TORQUE CONTROL GP

4N4267 TORQUE CONTROL GP
PART OF 7N8232, 8N8969, 4W6069, 2W8457, 4W8617, 4W8929,
7C9203, 7C9204, 8N8970, 4W8297 PUMPS

9Y-6797 TORQUE CONTROL GP

9Y6797 TORQUE CONTROL GP
PART OF 6I0868 PUMP-GOVERNOR
AN ATTACHMENT

VALVE GP

2W-0748 VALVE GP-FUEL

2W0748 VALVE GP-FUEL INJECTION
PROVIDES A FUEL NOZZLE FOR CONVERSION OF 3400 DITA
ENGINES TO FIRE PUMP RATINGS. AN ATTACHMENT

Information:

(For parts list, see above)

FUEL SYSTEM

CAMSHAFT AS

Service Magazine

Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20

CONTROL GP-DECELERATOR

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05

CONTROL GP-FUEL

Engine News

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly
1981/01/28

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints
1981/09/16

New Diaphragm Used In Fuel Ratio Control
1982/03/17

Improvements Made To Fuel Ratio Control {1278}
1982/12/15

Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/17

New EG3P Actuator Assemblies Available
1984/03/07

Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01

New Components Used In Fuel Ratio Control Groups
1992/05/01

New Diaphragm Used In Fuel Ratio Control Groups
1992/06/01

New Spring Used In Fuel Ratio Control
1977/03/15

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
1977/08/24

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08

Special Instruction

Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Specifications

Fuel Ratio Control
3408C & 3412C INDUSTRIAL ENGINES

Fuel Ratio Control
3412 INDUSTRIAL AND MARINE ENGINES

Disassembly and Assembly

Fuel Ratio Control
3408C & 3412C INDUSTRIAL ENGINES

Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

Improvements Made To Fuel Ratio Control {1278}
1982/11/29

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

CONTROL GP-FUEL INJECTION

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Service Magazine

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

Improvements Made To Fuel Ratio Control {1278}
1982/11/29

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05

More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23

New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19

Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

CONTROL GP-FUEL RATIO

Engine News

Possible Cause Of A Low Idle Misfire And/Or Backfire
1980/06/04

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly
1981/01/28

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints
1981/09/16

New Diaphragm Used In Fuel Ratio Control
1982/03/17

Improvements Made To Fuel Ratio Control {1278}
1982/12/15

Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/17

Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01

New Components Used In Fuel Ratio Control Groups
1992/05/01

New Diaphragm Used In Fuel Ratio Control Groups
1992/06/01

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting {1278,1287}
1996/01/17

New Spring Used In Fuel Ratio Control
1977/03/15

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
1977/08/24

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08

Special Instruction

Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Specifications

Fuel Ratio Control
3408C & 3412C INDUSTRIAL ENGINES

Fuel Ratio Control
3412 INDUSTRIAL AND MARINE ENGINES

Disassembly and Assembly

Fuel Ratio Control
3408C & 3412C INDUSTRIAL ENGINES

Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

Improvements Made To Fuel Ratio Control {1278}
1982/11/29

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

CONTROL GP-GOVERNOR

Engine News

New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04

New Diaphragm Used In Fuel Ratio Control
1982/03/17

Improvements Made To Fuel Ratio Control {1278}
1982/12/15

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06

Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/17

New EG3P Actuator Assemblies Available
1984/03/07

Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01

More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01

Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01

Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01

Governor Control Motor Polarity May Require A Change
1990/11/01

New Spring Used In Fuel Ratio Control
1977/03/15

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
1977/08/24

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}

Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}

Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}

Specifications

Governor Control
3408C & 3412C INDUSTRIAL ENGINES

Governor Linkage
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Governor Controls
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Governor Air Actuator
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Disassembly and Assembly

Automatic Timing Advance
3412 INDUSTRIAL & MARINE ENGINES

Governor (Low Speed Engine)
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10

Improvements Made To Fuel Ratio Control {1278}
1982/11/29

New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05

More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

New Fuel Shutoff Solenoid Assembly Used{1259}
1988/10/31

New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19

Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

DRAIN GP-FUEL

Engine News

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1983/07/06

Special Instruction

Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}

Service Magazine

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20

DRIVE GP-TACHOMETER

Engine News

New Tachometer Drive Group Adapter Assemblies Have A Larger Input Shaft
1983/07/06

New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For The Tachometer Drive Group And Transfer Pump
1978/03/01

Specifications

Drive For Tachometer Only
3412 INDUSTRIAL AND MARINE ENGINES

Drive For Tachometer And Service Meter
3412 INDUSTRIAL AND MARINE ENGINES

Disassembly and Assembly

Service Meter and Tachometer Drive
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

New Tachometer Drive Group Adapter Assemblies Have A Larger Input Shaft{7462,7487}
1983/07/04

New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27

FILTER GP-FUEL

Engine News

Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12

Single Connector Prevents Leakage From Fuel Filter Lines Groups
1981/07/15

Gasket Leakage On Aftermarket Fuel Filters
1986/01/01

Improved Fuel Priming Pump Used
1987/05/01

Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter
1991/07/01

Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01

New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13

Improved Seal on Fuel Filter {1261}
2005/09/12

A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21

A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}

Special Instruction

Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}

Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}

Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}

Technical Information Bulletin

Correct Usage of the 137-5541 Fuel Priming Pump As {1258, 1261}
Correct Usage of the 137-5541 Fuel Priming Pump As {1258, 1261}

Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262}
Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262}

Specifications

Primary Fuel Filter
3408C & 3412C INDUSTRIAL ENGINES

Fuel Filter Base
3408C & 3412C INDUSTRIAL ENGINES

Primary Fuel Filter
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Filter Base
3412 INDUSTRIAL AND MARINE ENGINES

Duplex Fuel Filters
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Primary Fuel Filter
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Tool Operating Manual

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Disassembly and Assembly

Fuel Priming Pump & Filter Base
3408C & 3412C INDUSTRIAL ENGINES

Fuel Priming Pump & Filter Base
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
1981/07/06

Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16

Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22

Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21

New Primary Fuel Filters are Available {1260, 1261}
2008/07/14

FUEL AR-HEAVY DISTILLATE

Special Instruction

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Service Magazine

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Diesel Fuel Recommendation Expanded{1280}
1977/02/14

High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

FUEL GP-SCREED

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

FUEL SYSTEM GP

Special Instruction

Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}

Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}

Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}

Tool Operating Manual

NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Reuse And Salvage Guidelines

Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}

Disassembly and Assembly

Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03

New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available {0374,1250}
1998/06/22

Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01

GOVERNOR GP

Engine News

New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04

Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25

To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08

Explanation Of Differences In Timing Advance Information
1981/08/26

Part Number For Fuel Injection Pump Group In New Location
1981/11/25

New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24

Fuel Rack Slots Have Improved Wear Resistance
1982/05/12

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25

Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20

Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19

New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06

Service Information For Woodward Governors
1983/10/26

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30

Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22

New EG3P Actuator Assemblies Available
1984/03/07

Overvoltage Protection For Woodward 2301 Governor
1984/04/11

Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16

New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16

New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20

Fill Oil Sump Before Installing Woodward Governor
1985/01/16

Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01

Changes To Fuel Systems
1985/09/01

Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01

More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01

Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01

Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01

New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01

New Fuel Shutoff Solenoid Assembly Used
1988/11/01

New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01

Governor Control Motor Polarity May Require A Change
1990/11/01

Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01

Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01

Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01

Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01

Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09

Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12

New Spring Used In Fuel Ratio Control
1977/03/15

New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13

Improvements To Fuel Injection Pump And Governor
1977/06/08

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13

Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12

New Governor Spring Changes Speed Regulation
1977/11/09

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08

New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For The Tachometer Drive Group And Transfer Pump
1978/03/01

O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03

A One-Piece Spring Seat Is Now Used In The Governor
1978/07/05

New Dashpot Spring Gives A Reduction In "Overshoot"
1978/07/05

Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}

Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}

Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}

Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}

Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}

Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

Service Letter-NACD

The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles

3400 V - Block Cleaniness at Gov'n Oil Supply Line
3400 V - Block Cleaniness at Gov'n Oil Supply Line

Specifications

Fuel Injection Pump
3408C & 3412C INDUSTRIAL ENGINES

Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES

Governor
3408C & 3412C INDUSTRIAL ENGINES

Governor And Fuel Pump Drive<BR> (Automatic Timing Advance Unit)
3408C & 3412C INDUSTRIAL ENGINES

Fuel Transfer Pump Drive
3408C & 3412C INDUSTRIAL ENGINES

Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES

Governor Control
3408C & 3412C INDUSTRIAL ENGINES

Fuel System Identification
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection
3412 INDUSTRIAL AND MARINE ENGINES

Governor
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Pump Housing (Earlier)
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Pump Housing (Later)
3412 INDUSTRIAL AND MARINE ENGINES

Governor Drive And Oil Pump
3412 INDUSTRIAL AND MARINE ENGINES

Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Standard Engine)
3412 INDUSTRIAL AND MARINE ENGINES

Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Low Speed Engine)
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Ratio Control
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Transfer Pump
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Transfer Pump Drive
3412 INDUSTRIAL AND MARINE ENGINES

Woodward PSG Governor
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Governor Linkage
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Governor Controls
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Governor Air Actuator
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Service Letter-China

Service Letter-Asia

Systems Operation

Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Installation And Operation
2301A SPEED CONTROL

Service Letter-APD

Testing and Adjusting

Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Installation And Operation
2301A SPEED CONTROL

Troubleshooting

Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI

Chapter 5. Troubleshooting
2301A SPEED CONTROL

Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A SPEED CONTROL

Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL

Disassembly and Assembly

Governor & Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES

Fuel Injection Pumps
3408C & 3412C INDUSTRIAL ENGINES

Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES

Governor & Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES

Fuel Shutoff Solenoid
3408C & 3412C INDUSTRIAL ENGINES

Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES

Fuel Transfer Pump
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Pumps
3412 INDUSTRIAL & MARINE ENGINES

Automatic Timing Advance
3412 INDUSTRIAL & MARINE ENGINES

Governor (Low Speed Engine)
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Pump Housing & Governor
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09

New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22

Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18

Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10

New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28

New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Service Information For Woodward Governors{0374,1264}
1983/09/26

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06

New EG3P Actuator Assemblies Available{1289}
1984/02/27

Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09

Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23

New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14

Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04

Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11

Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02

Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02

Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05

More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06

Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10

New Governor Spring Changes Speed Regulation{1264,1286}
1977/10/31

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23

Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30

New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01

New Dashpot Spring Gives A Reduction In "Overshoot"{1264}
1978/06/26

A One-Piece Spring Seat Is Now Used In The Governor{1264}
1978/06/26

Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19

Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/07/30

Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29

Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15

Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

HEATER GP-FUEL

Special Instruction

Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}

Service Magazine

Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07

Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

INJECTION GP-CETANE

Special Instruction

Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}

Service Magazine

Ether Starting Aid Groups Are Now Available{1456}
1979/01/22

Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

LINES GP-FUEL

Engine News

New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07

Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09

Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27

Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12

Single Connector Prevents Leakage From Fuel Filter Lines Groups
1981/07/15

Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26

New Washers Permit Locks To Hold Better
1982/02/10

New Fuel Nozzle Adapter Assembly Used
1982/02/24

New Fuel Nozzle Test Sheet Available
1982/10/20

Bulged Capsule-Type Fuel Nozzles
1982/10/20

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20

Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20

Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15

New Fuel Nozzle Adapters Used
1983/05/25

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1983/07/06

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07

New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01

New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01

Changes To Fuel Systems
1985/09/01

Check Fuel Injection Nozzles In Overheated Engines
1985/09/01

Gasket Leakage On Aftermarket Fuel Filters
1986/01/01

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01

Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01

New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01

Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01

5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.
1992/02/01

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01

Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01

Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/01

New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
1977/08/24

Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05

Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16

Special Instruction

Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}

Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

7000 Series Nozzles{0782}
7000 Series Nozzles{0782}

Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}

Service Letter-NACD

Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles

Specifications

Fuel Injection Lines
3408C & 3412C INDUSTRIAL ENGINES

Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES

Primary Fuel Filter
3408C & 3412C INDUSTRIAL ENGINES

Fuel Filter Base
3408C & 3412C INDUSTRIAL ENGINES

Engines With Capsule - Type Nozzles
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Nozzle And Adapter (Earlier 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Nozzle And Adapter (Later 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Lines
3412 INDUSTRIAL AND MARINE ENGINES

Duplex Fuel Filters
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Primary Fuel Filter
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Tool Operating Manual

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Fuel Ratio Control
3408C & 3412C INDUSTRIAL ENGINES

Fuel Injection Lines
3408C & 3412C INDUSTRIAL ENGINES

Fuel Injection Nozzles & Adapters
3408C & 3412C INDUSTRIAL ENGINES

Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES

Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Valves (Precombustion Chamber)
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Valves (Direct Injection)
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Nozzles
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES

Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25

Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12

Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
1981/07/06

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

New Washers Permit Locks To Hold Better{1252}
1982/01/25

New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

Improvements Made To Fuel Ratio Control {1278}
1982/11/29

New Fuel Nozzle Adapters Used{1106}
1983/05/09

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01

New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01

Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15

Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02

Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16

Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07

Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21

Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29

Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26

Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06

Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11

5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

LINES GP-FUEL INJECTION

Engine News

New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07

Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27

New Washers Permit Locks To Hold Better
1982/02/10

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20

Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1983/07/06

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07

Changes To Fuel Systems
1985/09/01

Check Fuel Injection Nozzles In Overheated Engines
1985/09/01

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01

Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01

Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/01

New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16

Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/05/29

Improved Procedure to Install Double Wall Fuel Lines {1252, 1254}
2008/05/19

Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17

Special Instruction

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Service Letter-NACD

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles

Specifications

Engines With Capsule - Type Nozzles
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Nozzle And Adapter (Earlier 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Nozzle And Adapter (Later 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES

Fuel Injection Lines
3412 INDUSTRIAL AND MARINE ENGINES

Tool Operating Manual

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}

Service Letter-China

Service Letter-Asia

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Disassembly and Assembly

Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Valves (Precombustion Chamber)
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Valves (Direct Injection)
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Nozzles
3412 INDUSTRIAL & MARINE ENGINES

Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES

Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25

Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

New Washers Permit Locks To Hold Better{1252}
1982/01/25

New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27

New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01

Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15

Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02

Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07

Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21

Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29

Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07

New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06

Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01

LINES GP-FUEL RATIO CONTROL

Special Instruction

Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}

Disassembly and Assembly

Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

Improvements Made To Fuel Ratio Control {1278}
1982/11/29

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14

New Spring Used In Fuel Ratio Control{1278}
1977/03/21

New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11

Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23

New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

METER GP-SERVICE

Disassembly and Assembly

Service Meter and Tachometer Drive
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Self-Powered Hour Meters Available{7480,7450}
1987/02/16

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26

MISCELLANEOUS INFORMATION

Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07

Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25

Different Water Temperature Regulators Now Used To Prevent Overheating{1355}
1980/03/24

Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12

Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29

Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24

6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31

New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21

Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15

New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22

New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18

Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes{7418}
1982/11/08

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10

Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17

New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28

New Fuel Nozzle Adapters Used{1106}
1983/05/09

New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16

New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04

Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15

Service Information For Woodward Governors{0374,1264}
1983/09/26

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

New EG3P Actuator Assemblies Available{1289}
1984/02/27

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27

Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09

Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23

New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14

New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14

Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10

Truck sale:

95,720

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

96,795

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

93,569

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

60,000

Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

159,600

Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY