AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W8766 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER 4N1101-PAGE 349, 6N1656-PAGE 385 & 4W8765-PAGE 363.01 PART OF 2W9293 CONVERSION AN ATTACHMENT 3412


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION

ENGINE - MACHINE 3412 ENGINE - MACHINE 38S
 3412 ENGINE INDUSTRIAL 38S13236-16483 SEBP1648 3412 38S   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
4W-8766 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
2W-9123 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-9204 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-9204 PUMP GP-GOV, FUEL INJ & TFR
 

#SEBP16480660
 

4W-8766: PUMP GP-GOV, FUEL INJ & TFR

4W8766 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
4N1101-PAGE 349, 6N1656-PAGE 385 & 4W8765-PAGE 363.01
PART OF 2W9293 CONVERSION
AN ATTACHMENT
c343356 SEBP1648
4W8766 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2832 [1] TUBE AS  
2. 5K-9246 [1] CONNECTOR-FLARED  
3. 0S-1591 [8] BOLT  
4. 5K-9235 [1] ELBOW-FLARED  
5. 2H-5330 [4] BOLT  
6. 0S-1594 [6] BOLT  
7. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
8. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
  4N-1868 [1] GASKET  
9. 4W-8765 Y [1] PUMP GP-FUEL INJECTION  
10. 1F-9303 [1] LEVER-GOVERNOR  
  2H-3738 [1] BOLT  
11. 4N-1104 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480661
 

2W-9123: PUMP GP-GOV DRV,FUEL INJ & TFR

2W9123 GOVERNOR DRIVE, FUEL INJECTION & FUEL TRANSFER PUMP GP
4N1101-PAGE 349, 1W0945-PAGE 362 AND 1N4932-PAGE 387
PART OF 2W9320 CONVERSION. AN ATTACHMENT
c331696 SEBP1648
2W9123 PUMP GP-GOV DRV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [6] BOLT  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 0S-1591 [2] BOLT  
4. 3B-1915 [4] BOLT  
5. 2H-5330 [5] BOLT  
6. 0S-1617 [2] BOLT  
  9M-1974 [2] WASHER  
7. 4N-5656 [1] COVER-GOVERNOR  
  2P-8643 [1] GASKET  
8. 1N-4932 Y [1] DRIVE GP-GOVERNOR  
  4N-1868 [1] GASKET  
9. 1W-0945 Y [1] PUMP GP-FUEL INJECTION  
10. 1F-9303 [1] LEVER-GOVERNOR  
  2H-3738 [1] BOLT  
11. 4N-1104 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480662
 

7C-9204: PUMP GP-GOV, FUEL INJ & TFR

7C9204 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
TYPE 1. S/N 38S13549-UP
4N1101-PAGE 349, 9Y3336-PAGE 351, 4W6068-PAGE 358,
4W6013-PAGE 374 & 4N4267-PAGE 390
c454593 SEBP1648
7C9204 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 4N-1104 [1] GASKET  
4. 9L-6446 [1] SPRING-GOVERNOR  
5. 2P-9556 [1] WASHER (FLAT)  
  2N-0828 [2] WASHER  
6. 4W-6013 Y [1] GOVERNOR GP  
7. 4N-4267 Y [1] TORQUE CONTROL GP  
8. 5L-7812 [2] BOLT  
  9M-1974 [2] WASHER  
9. 4N-5656 [1] COVER-GOVERNOR  
  2P-8643 [1] GASKET  
10. 4W-6068 Y [1] PUMP GP-FUEL INJECTION  
11. 4N-1868 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480663
 

7C-9204: PUMP GP-GOV, FUEL INJ & TFR

7C9204 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
TYPE 2. S/N 38S13549-UP
4N1101-PAGE 349, 7E0572-PAGE 375.03, 4N4267-PAGE 390,
4W6068-PAGE 358 & 9Y3336-PAGE 351
c641675 SEBP1648
7C9204 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP-GOV,FUEL INJ & TFR  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 4N-1104 [1] GASKET  
4. 9L-6446 [1] SPRING-GOVERNOR  
5. 2P-9556 [1] WASHER (FLAT)  
  2N-0828 [2] WASHER  
6. 7E-0572 Y [1] GOVERNOR GP  
7. 4N-4267 Y [1] TORQUE CONTROL GP  
8. 5L-7812 [2] BOLT  
  5N-4185 [2] WASHER-SEAL  
9. 4N-5656 [1] COVER-GOVERNOR  
  2P-8643 [1] GASKET  
10. 4W-6068 Y [1] PUMP GP-FUEL INJECTION  
11. 4N-1868 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480664
 

7C-9203: PUMP GP-GOV, FUEL INJ & TFR

7C9203 PUMP GP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER
TYPE 1. S/N 38S13550-UP
4N1101-PAGE 349, 9Y3336-PAGE 351, 4W6068-PAGE 358,
4W6013-PAGE 374 & 4N4267-PAGE 390
c454675 SEBP1648
7C9203 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 4N-1104 [1] GASKET  
4. 4N-6681 [1] SPRING-GOVERNOR  
5. 2P-9556 [1] WASHER (FLAT)  
  2N-0828 [2] WASHER  
6. 4W-6013 Y [1] GOVERNOR GP  
7. 4N-4267 Y [1] TORQUE CONTROL GP  
8. 5L-7812 [2] BOLT  
  9M-1974 [2] WASHER  
9. 4N-5656 [1] COVER-GOVERNOR  
  2P-8643 [1] GASKET  
10. 4W-6068 Y [1] PUMP GP-FUEL INJECTION  
11. 4N-1868 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480665
 

7C-9203: PUMP GP-GOV, FUEL INJ & TFR

7C9203 PUMP GP-GOVERNOR,FUEL INJECTION & FUEL TRANSFER
TYPE 2. S/N 38S13550-UP
4N1101-PAGE 349, 7E0572-PAGE 375.03, 4N4267-PAGE 390
4W6068-PAGE 358, 9Y3336-PAGE 351
c641663 SEBP1648
7C9203 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP-GOV,FUEL INJ & TFR  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 4N-1104 [1] GASKET  
4. 4N-6681 [1] SPRING-GOVERNOR  
5. 2P-9556 [1] WASHER (FLAT)  
  2N-0828 [2] WASHER  
6. 7E-0572 Y [1] GOVERNOR GP  
7. 4N-4267 Y [1] TORQUE CONTROL GP  
8. 5L-7812 [2] BOLT  
  5N-4185 [2] WASHER-SEAL (2MM THK)  
9. 4N-5656 [1] COVER-GOVERNOR  
  2P-8643 [1] GASKET  
10. 4W-6068 Y [1] PUMP GP-FUEL INJECTION  
11. 4N-1868 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480666
 

6I-0868: PUMP GP-GOV, FUEL INJ & TFR

6I0868 PUMP GP-GOVERNOR, FUEL INJECTION, FUEL TANSFER
9Y3336-PAGE 351, 4N1101-PAGE 349, 4W6017-PAGE 379.05
9Y6797-PAGE 391, 4W6068-PAGE 360
AN ATTACHMENT
c640568 SEBP1648
6I0868 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP-GOV,FUEL INJ & TFR  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 4N-1104 [1] GASKET  
4. 2N-2878 [1] SPRING-GOVERNOR  
5. 2P-9556 [1] WASHER (FLAT)  
  2N-0828 [2] WASHER (SPRING)  
6. 4W-6017 Y [1] GOVERNOR GP  
7. 9Y-6797 Y [1] TORQUE CONTROL GP  
8. 5L-7812 [2] BOLT  
  5N-4185 [2] WASHER-SEAL  
9. 7B-4948 [1] COVER  
  7B-4910 [1] GASKET  
10. 4W-6068 Y [1] PUMP GP-FUEL INJECTION  
  4N-1868 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480667
 

4N-1101: PUMP GP-FUEL TRANSFER

4N1101 PUMP GP-FUEL TRANSFER
4W5477-PAGE 349.01. PART OF 7N8232, 8N9232, 8N8969, 4W6069, 2W8457,
4W8617, 4W8679, 4W8929, 4W8297, 2W9124, 7N1252, 2W9123, 7C9203,
7C9204, 4W8766, 4W6074, 1W2191, 6I0868, 8N8970 PUMPS
c499888 SEBP1648
4N1101 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 4N-1105 [1] GASKET  
3. 5M-6214 [2] PLUG-PIPE  
4. 4W-5477 CY [1] PUMP GP-FUEL TRANSFER  
5. 0S-1617 [2] BOLT  
6. 4N-7437 [1] PLUG-THREAD O-RING  
  7J-0204 [1] SEAL-O-RING  
7. 4N-1091 [1] HOUSING AS  
8. 2D-8576 [1] BEARING-FLANGE  
9. 4N-1098 [1] SHAFT AS  
10. 4N-1102 [1] GEAR-TRANSFER PUMP DRIVE  
    (11 TEETH)
11. 9S-9332 [1] FITTING-ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16480668
 

4W-5477: PUMP GP-FUEL TRANSFER

4W5477 PUMP GP-FUEL TRANSFER
PART OF 4N1101 PUMP-FUEL TRANSFER
c609643 SEBP1648
4W5477 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2694 [3] BOLT (5/16 X 18 X 2IN)  
2. 4N-1116 [1] SHAFT AS-PUMP  
3. 4N-1119 [1] GEAR-TRANSFER PUMP  
    (10 TEETH)
4. 6V-8977 [1] SEAL-LIP  
5. 5J-5314 [3] BOLT  
6. 7N-6128 [1] COVER-TRANSFER PUMP  
7. 7M-7260 B GASKET-LIQUID  
8. 4W-5476 [1] BODY AS-TRANSFER PUMP  
9. 7S-4433 [1] FERRULE  
10. 1P-2298 [1] VALVE AS  
11. 8F-6058 [1] BEARING  
12. 5P-9294 [1] SEAL-LIP  
13. 4N-7357 [1] BEARING-SLEEVE  
14. 6V-8977 [1] SEAL-LIP  
15. 1W-6177 [1] SHAFT-IDLER  
16. 8S-1925 [1] GEAR-SHAFT DRIVE  
    (11 TEETH)
17. 3H-1489 [1] KEY-WOODRUFF  
18. 2F-8616 [1] LOCKNUT (3/8 X 24 THD)  
19. 6J-2419 [1] SEAL-O-RING  
20. 4N-1119 [1] GEAR-TRANSFER PUMP  
    (10 TEETH)
21. 7S-4440 [1] BOLT  
  4N-7465 [1] GASKET  
22. 6N-1069 [1] SPRING  
23. 2W-3294 [1] PLUNGER AS-VALVE  
24. 3K-8460 [1] PLUG  
  1J-9671 [1] SEAL-O-RING (10.52MM ID)  
25. 4B-4863 [2] WASHER (1.2MM THK)  
  B   USE AS REQUIRED
 

#SEBP16480669
 

7W-0561: PUMP GP-FUEL INJECTION

7W0561 PUMP GP-FUEL INJECTION
PART OF 4W6068, 4W8680, 4W8765, 4W6073 PUMPS
c353004 SEBP1648
7W0561 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK  
4. 7W-1927 [1] RING-RETAINER  
5. 7W-0182 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-GEAR  
7. 7N-1066 C [1] WASHER-RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Fuel Nozzle Adapter Assembly Used
1982/02/24
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
New Fuel Nozzle Adapters Used
1983/05/25
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01
Changes To Fuel Systems
1985/09/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
New Governor Spring Changes Speed Regulation
1977/11/09
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
A One-Piece Spring Seat Is Now Used In The Governor
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/05/29
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Governor
3408C & 3412C INDUSTRIAL ENGINES
Governor And Fuel Pump Drive<BR> (Automatic Timing Advance Unit)
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor Control
3408C & 3412C INDUSTRIAL ENGINES
Valve Mechanism Covers
3408C & 3412C INDUSTRIAL ENGINES
Fuel System Identification
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection
3412 INDUSTRIAL AND MARINE ENGINES
Engines With Capsule - Type Nozzles
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Earlier 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Later 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Governor
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing (Earlier)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing (Later)
3412 INDUSTRIAL AND MARINE ENGINES
Governor Drive And Oil Pump
3412 INDUSTRIAL AND MARINE ENGINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Standard Engine)
3412 INDUSTRIAL AND MARINE ENGINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Low Speed Engine)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Ratio Control
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Transfer Pump Drive
3412 INDUSTRIAL AND MARINE ENGINES
Woodward PSG Governor
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Linkage
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Controls
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Air Actuator
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
The Governors Need To Be Reworked On Certain 3412 Engines Equipped With A 9Z5359 Modification (High Output 3412 Custom Marine Engine)
Disassembly and Assembly
Rocker Shaft Assembly
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pumps
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Fuel Shutoff Solenoid
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3412 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3412 INDUSTRIAL & MARINE ENGINES
Governor (Low Speed Engine)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles &amp; Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES
Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Use Insert To Repair Bearing Seat In Water Pump Housing{1361}
1977/03/07
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
New Governor Spring Changes Speed Regulation{1264,1286}
1977/10/31
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
New Dashpot Spring Gives A Reduction In &quot;Overshoot&quot;{1264}
1978/06/26
A One-Piece Spring Seat Is Now Used In The Governor{1264}
1978/06/26
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3412 :

PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2191 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-FUEL INJECTION
7N-6126 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7N-6126 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6073 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6073 PUMP GP-FUEL INJECTION
PUMP GP-GOV DRV,FUEL INJ & TFR
4W-6074 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
7N-1252 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
2W-9123 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-9204 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-9204 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-9203 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
7C-9203 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
6I-0868 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.