AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U3989 CYLINDER GP-DOZER LIFT-TYPE 1 (CHG 1) 95.25MM (3.75 IN.) BORE X 1262MM (49.61 IN.) STROKE BULLDOZER S/N 1BH1-UP, 1CH1-UP, 1DH1-UP ALSO PART OF 1U2392, 4T4415, 4T4367, 6Y0079, 6Y0080 BULLDOZERS AN ATTACHMENT D6H


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D6H TRACK-TYPE TRACTOR 8KB
 D6H TRACTOR / DIRECT DRIVE / 8KB00001-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1650 D6H 8KB   (1986)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT
1U-3992 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-BULLDOZER LIFT
1U-3989 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
1U-3989 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
 

#SEBP16500410
 

1U-3989: CYLINDER GP-BULLDOZER LIFT

1U3989 CYLINDER GP-DOZER LIFT-TYPE 1
(CHG 1) 95.25MM (3.75 IN.) BORE X 1262MM (49.61 IN.) STROKE
BULLDOZER S/N 1BH1-UP, 1CH1-UP, 1DH1-UP
ALSO PART OF 1U2392, 4T4415, 4T4367, 6Y0079, 6Y0080 BULLDOZERS
AN ATTACHMENT
c338865 SEBP1650
1U3989 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4082 [1] HEAD  
2. 1F-6762 [1] BOLT  
3. 1U-4738 [1] WASHER  
4. 5J-8019 [1] RING-WEAR  
5. 5J-3620 [1] SEAL-RING  
6. 9T-3884 [1] PISTON AS  
7. 2H-4145 [1] SEAL-O-RING  
8. 1S-0669 [1] RING  
9. 5J-8011 [1] SEAL AS  
10. 1U-4081 R [1] ROD AS  
11. 3J-6572 [12] SHIM .5MM(.02IN)THK  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT  
14. 1B-4331 [4] NUT  
15. 1U-4079 [1] CROWN  
16. 1K-6982 [1] SEAL-LIP TYPE  
17. 5J-0964 [1] SEAL-U-CUP  
18. 1U-4086 R [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3015 [1] KIT-SEAL  
    (INCL SEALS & RINGS)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16500411
 

1U-3989: CYLINDER GP-BULLDOZER LIFT

1U3989 CYLINDER GP-DOZER LIFT-TYPE 2
(CHG 3) 95.25MM (3.75 IN.) BORE X 1262MM (49.61 IN.) STROKE
BULLDOZER S/N 1BH1-UP, 1CH1-UP, 1DH1-UP
ALSO PART OF 1U2392, 4T4415,4T4367, 6Y0079, 6Y0080 BULLDOZERS
AN ATTACHMENT
c565278 SEBP1650
1U3989 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4762 C [1] HEAD  
2. 1F-6762 [1] BOLT  
3. 1U-4738 [1] WASHER  
4. 5J-8019 J [1] RING-WEAR  
5. 8C-3839 C [1] SEAL AS  
6. 9T-3884 [1] PISTON AS  
7. 2H-4145 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACK UPPER)  
9. 5J-8011 [1] SEAL AS  
10. 1U-4081 R [1] ROD AS  
11. 8E-9212 [16] SHIM  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT  
14. 1B-4331 [4] NUT (FULL)  
15. 1U-4079 [1] CROWN  
16. 8C-3840 C [1] SEAL-LIP TYPE  
17. 5J-0964 J [1] SEAL-U-CUP  
18. 1U-4086 R [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
20. 8T-5668 [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3015 [1] KIT-SEAL (INCL PARTS MARKED J)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP16500412
 

9T-2716: CYLINDER GP-RIPPER LIFT

9T2716 CYLINDER GP-RIPPER LIFT (CHANGE 00)
127 MM (5 IN) BORE X 362 MM (14.25 IN) STROKE
TYPE 1-RIPPER S/N 1EH1-UP
PART OF 9W0804 RIPPER
AN ATTACHMENT
c523348 SEBP1650
9T2716 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
4. 9T-2715 [1] CYLINDER AS  
5. 4K-3128 [2] BEARING-SLEEVE  
6. 6J-9739 [1] HEAD  
7. 5J-3620 [1] SEAL-RING  
8. 5J-0964 [1] SEAL-U-CUP  
9. 1K-6982 [1] SEAL-LIP TYPE  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BEARING-SLEEVE  
12. 1D-4628 [4] BOLT  
  5P-8249 [4] WASHER  
13. 2K-4096 [1] RING  
14. 5F-3144 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER  
16. 2J-0564 [1] NUT-SELF LOCKING  
 

#SEBP16500413
 

9T-2716: CYLINDER GP-RIPPER LIFT

9T2716 CYLINDER GP-RIPPER LIFT (CHANGE 01)
127 MM (5 IN) BORE X 362 MM (14.25 IN) STROKE
TYPE 2-RIPPER S/N 1EH1-UP
PART OF 9W0804 RIPPER
AN ATTACHMENT
c568748 SEBP1650
9T2716 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
4. 9T-2715 [1] CYLINDER AS  
5. 4K-3128 [2] BEARING-SLEEVE  
6. 9T-6863 C [1] HEAD  
7. 8C-3839 [1] SEAL AS  
8. 5J-0964 [1] SEAL-U-CUP  
9. 8C-3840 [1] SEAL-LIP  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BEARING-SLEEVE  
12. 1D-4628 [4] BOLT  
  5P-8249 [4] WASHER  
13. 2K-4096 [1] RING  
14. 5F-3144 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER  
16. 2J-0564 [1] LOCKNUT  
17. 8T-5668 C [1] RING-WEAR  
18. 1P-4576 [4] FLANGE  
19. 4J-5267 [2] SEAL-O-RING  
20. 5H-4018 [2] COVER  
21. 9B-7237 [8] BOLT  
  8T-4896 [8] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16500414
 

1U-2393: LINES GP-TILT CYLINDER

1U2393 LINES GP-TILT CYLINDER
TYPE 1. BULLDOZER S/N 1CH1-UP, 1DH1-UP
ALSO PART OF 4T0621 CYLINDER AR-TILT
AN ATTACHMENT
c339604 SEBP1650
1U2393 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-6932 [1] HOSE AS  
2. 7T-6933 [1] HOSE AS  
3. 0S-1621 [3] BOLT  
4. 0S-1595 [4] BOLT  
5. 5P-8245 [7] WASHER  
6. 1P-4576 [4] FLANGE  
7. 4J-5267 [2] SEAL  
8. 3B-1915 [8] BOLT  
  5M-2894 [8] WASHER  
9. 7T-6934 [1] HOSE AS  
10. 7T-6931 [1] HOSE AS  
11. 4T-1563 [1] GUARD AS  
12. 6V-9808 [2] UNION-90 DEGREE  
  6V-8398 [4] SEAL-0-RING  
13. 6J-0499 [3] LUG  
14. 4T-1564 [1] GUARD  
 

#SEBP16500415
 

1U-2393: LINES GP-TILT CYLINDER

1U2393 LINES GP-TILT CYLINDER
TYPE 2. BULLDOZER S/N 1CH1-UP, 1DH1-UP
ALSO PART OF 4T0621 CYLINDER AR-TILT
AN ATTACHMENT
c459943 SEBP1650
1U2393 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-6932 [1] HOSE AS  
2. 7T-6933 [1] HOSE AS  
3. 0S-1621 [3] BOLT  
4. 0S-1595 [4] BOLT  
5. 5P-8245 [7] WASHER  
6. 1P-4576 [4] FLANGE  
7. 4J-5267 [2] SEAL  
8. 3B-1915 [8] BOLT  
  5M-2894 [8] WASHER  
9. 7T-6934 [1] HOSE AS  
10. 7T-6931 [1] HOSE AS  
11. 4T-1563 [1] GUARD AS  
12. 6V-8981 C [2] ELBOW  
  6V-8398 [4] SEAL-0-RING  
13. 6J-0499 [3] LUG  
14. 4T-1564 [1] GUARD  
15. 6V-9169 C [2] NUT-BULKHEAD  
16. 3Y-5405 C [2] RUBBER  
17. 8T-7231 C [2] SEAL  
18. 9W-6381 C [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16500416
 

1U-2393: LINES GP-TILT CYLINDER

1U2393 LINES GP-TILT CYLINDER
TYPE 3. BULLDOZER S/N 1CH1-UP, 1DH1-UP
ALSO PART OF 4T0621 CYLINDER, 6Y0079, 6Y0080, 6Y0945, 6Y0946 BULLDOZER ARS
AN ATTACHMENT
c459944 SEBP1650
1U2393 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-6932 [1] HOSE AS  
2. 7T-6933 [1] HOSE AS  
3. 0S-1621 [3] BOLT  
4. 0S-1595 [4] BOLT  
5. 5P-8245 [7] WASHER  
6. 1P-4576 [4] FLANGE  
7. 4J-5267 [2] SEAL  
8. 3B-1915 [8] BOLT  
  5M-2894 [8] WASHER  
9. 7T-6934 [1] HOSE AS  
10. 7T-6931 [1] HOSE AS  
11. 4T-1563 [1] GUARD AS  
12. 6V-8981 [2] ELBOW  
  6V-8398 [4] SEAL-0-RING  
13. 4T-1564 [1] GUARD  
14. 6V-9169 [2] NUT-BULKHEAD  
15. 3Y-5405 [2] RUBBER  
16. 8T-7231 [2] SEAL  
 

#SEBP16500417
 

1U-2393: LINES GP-TILT CYLINDER

1U2393 LINES GP-TILT CYLINDER
TYPE 4. BULLDOZER S/N 1CH1-UP, 1DH1-UP
PART OF 6Y0079, 6Y0080, 6Y0945 & 6Y0946 BULLDOZER ARS
AN ATTACHMENT
c476718 SEBP1650
1U2393 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3474 CI [1] HOSE AS  
2. 6Y-3472 CI [1] HOSE AS  
3. 5P-2228 C [3] BOLT  
4. 8T-8917 C [4] BOLT  
5. 8T-4223 [7] WASHER  
6. 1P-4576 [4] FLANGE  
7. 4J-5267 [2] SEAL  
  8T-4896 C [8] WASHER-HARD  
9. 7T-6934 I [1] HOSE AS  
10. 7T-6931 I [1] HOSE AS  
11. 4T-1563 [1] GUARD AS  
12. 6V-8981 [2] ELBOW  
  6V-8398 [4] SEAL-0-RING  
13. 4T-1564 [1] GUARD  
14. 6V-9169 [2] NUT-BULKHEAD  
15. 3Y-5405 [2] RUBBER  
16. 4J-5267 C [2] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP16500418
 

4T-5349: LINES GP-TILT CYLINDER

4T5349 LINES GP-TILT CYLINDER-PART 1 OF 2
REPLACED BY 9W9079-PAGE 213.01
PART OF 4T1560 CYLINDER-TILT
AN ATTACHMENT
c353093 SEBP1650
4T5349 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [8] BOLT  
  5M-2894 [8] WASHER  
2. 1P-4576 [4] FLANGE  
  8T-7235 C [2] SEAL  
3. 4T-2355 [1] GUARD  
4. 0S-1595 [4] BOLT  
  5P-8245 [4] WASHER  
5. 9V-0321 [1] BLOCK  
6. 3G-8047 [1] GROMMET  
7. 3G-8057 [1] CLIP (SLOT)  
8. 3G-8054 [1] CLIP (TAB)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16500419
 

4T-5349: LINES GP-TILT CYLINDER

4T5349 LINES GP-TILT CYLINDER-PART 2 OF 2
REPLACED BY 9W9079-PAGE 213.01
PART OF 4T1560 CYLINDER-TILT
AN ATTACHMENT
c353395 SEBP1650
4T5349 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-9005 [1] HOSE AS  
2. 7T-9004 [1] HOSE AS  
3. 0S-1594 [2] BOLT  
  5M-2894 [2] WASHER  
4. 6V-9808 [2] UNION-90 DEGREE  
  6V-8398 [4] SEAL-0-RING  
5. 7T-9003 [1] HOSE AS  
6. 0S-1621 [3] BOLT  
  5P-8245 [3] WASHER  
  6H-3609 [3] BOSS  
7. 1U-3078 [1] GUARD  
8. 3Y-5405 [2] RUBBER  
9. 7T-9002 [1] HOSE AS  
10. 8T-7231 C [2] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6H :

CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3992 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
9W-9057 CYLINDER AR-TILT
4T-0621 CYLINDER AR-TILT
4T-1560 CYLINDER AR-TILT
CYLINDER GP-BULLDOZER LIFT
1U-3989 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
LINES GP-TILT CYLINDER
1U-2393 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
1U-2393 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
1U-2393 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
1U-2393 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
4T-5349 LINES GP-TILT CYLINDER

Truck sale:

 
 
Caterpillar D6H
- Crawler dozers
EMPIRE MACHINERY
Caterpillar D6H, Crawler dozers, Construction
75,000 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
TRACTOR & EQUIPMENT CO.
Caterpillar D6H, Crawler dozers, Construction
38,000 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
MACALLISTER MACHINERY CO., INC
Caterpillar D6H, Crawler dozers, Construction
65,625 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
HOLT CAT
Caterpillar D6H, Crawler dozers, Construction
71,015 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.