AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

IT18B INTEGRATED TOOLCARRIER 1DF00001-UP (MACHINE) POWERED BY 3204 ENGINE LUBRICATION SYSTEM Caterpillar SIS



INTEGRATED TOOLCARRIER IT18B INTEGRATED TOOLCARRIER 1DF
 IT18B INTEGRATED TOOLCARRIER 1DF00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1652 IT18B 1DF   (1987)

Parts group IT18B:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER GP
1W-7298 BREATHER GP
1W7298 BREATHER GP
FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
8N-5930 FILTER GP-ENGINE OIL
8N5930 FILTER GP-ENGINE OIL
FILLER GP-OIL
7N-6496 FILLER GP-OIL
7N6496 FILLER GP-ENGINE OIL
FUMES DISPOSAL GP
FUMES DISPOSAL GP
7N-6497 FUMES DISPOSAL GP
7N6497 FUMES DISPOSAL GP
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-6498 GAUGE GP-OIL LEVEL (DIPSTICK)
7N6498 GAUGE GP-OIL LEVEL (DIPSTICK)
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-8869 LINES GP-TURBOCHARGER OIL
1W8869 LINES GP-TURBOCHARGER OIL
PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
2W-2833 PUMP GP-ENGINE OIL
2W2833 PUMP GP-ENGINE OIL
WITHOUT HOUSING
ENGINE S/N 45V57072-82526
PUMP GP-OIL
7C-5300 PUMP GP-OIL
7C5300 PUMP GP-ENGINE OIL
WITHOUT HOUSING
ENGINE S/N 45V82527-UP

Information:

(For parts list, see above)

Specifications
Air Breather
3204 VEHICULAR ENGINE
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Service Magazine
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Fumes Disposal Group Improved{1317}
1985/09/02
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Oil Filter
3204 VEHICULAR ENGINE
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Oil Filter And Base
SUPPLEMENT FOR IT18 & IT28 INTEGRATED TOOLCARRIER - 3204 VEH
Service Magazine
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Service Magazine
Fumes Disposal Group Improved{1317}
1985/09/02
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Disassembly and Assembly
Piston Cooling Orifices
3204 VEHICULAR ENGINES
Service Magazine
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fumes Disposal Group Improved{1317}
1985/09/02
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Specifications
Oil Pump
3204 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Oil Pump And Relief Valve
3204 VEHICULAR ENGINES
Service Magazine
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Check Engine Water Pump Impeller Face Clearance If The Engine Experiences Symptoms Of Overheating {1361}
1993/01/25
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar IT18B, Construction
26,000 
Caterpillar IT18B, Construction
- Wheel Loaders
YANCEY BROS. CO.
GA
 
 
CATERPILLAR IT18B 1991
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io
1990 CAT IT18B
USD $26,500 
1990 CAT IT18B

FABICK CAT
Milwaukee, Wisconsin
1991 CAT IT18B
USD $32,500 
1991 CAT IT18B

US Earthmoving Machinery LLC
CAT IT18B
 
CAT IT18B

McGrew Equipment Company
Seven Valleys, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.