AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W0469 PUMP GP-FUEL INJECTION TYPE 1. S/N 45V57072-99999,7YJ1-UP 1W6539-PAGE 53 PART OF 4W4930 GOVERNOR & FUEL INJECTION PUMP IT18B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP
TORQUE CONTROL GP
LINES GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL INJECTION

INTEGRATED TOOLCARRIER IT18B INTEGRATED TOOLCARRIER 1DF
 IT18B INTEGRATED TOOLCARRIER 1DF00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1652 IT18B 1DF   (1987)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
GOV & FUEL INJ PUMP GP
4W-4938 GOV & FUEL INJ PUMP GP
PUMP GP-FUEL INJECTION
4W-0469 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-0469 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
 

#SEBP16520080
 

4W-0469: PUMP GP-FUEL INJECTION

4W0469 PUMP GP-FUEL INJECTION
TYPE 1. S/N 45V57072-99999,7YJ1-UP
1W6539-PAGE 53
PART OF 4W4930 GOVERNOR & FUEL INJECTION PUMP
c517589 SEBP1652
4W0469 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING AS-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 8N-2518 [1] BEARING-SLEEVE  
8. 7N-7969 [4] DOWEL  
9. 7N-7970 [1] BEARING-SLEEVE  
10. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING  
13. 7E-4846 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER-FUEL PUMP  
15. 4W-0468 [1] CAMSHAFT AS  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT  
18. 1S-5440 [4] DOWEL  
19. 4N-9019 [1] DOWEL  
20. 8N-2511 [1] CARRIER-WEIGHT  
21. 7N-7166 [2] RACE-BEARING-THRUST  
22. 7L-3326 [1] BEARING-THRUST  
23. 7N-7265 [1] SHIELD-WT CARRIAGE  
24. 8N-2510 [1] SHAFT-WT CARRIER  
25. 7N-8421 [1] RING-RETAINING  
26. 8N-2487 [1] WASHER-THRUST  
27. 8N-2489 [4] LIFTER AS  
28. 0S-1615 [4] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16520081
 

4W-0469: PUMP GP-FUEL INJECTION

4W0469 PUMP GP-FUEL INJECTION
TYPE 2. 7YJ1-UP
1W6539-PAGE 53
PART OF 4W4930 GOVERNOR & FUEL INJECTION PUMP
c546972 SEBP1652
4W0469 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING AS-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 6I-0979 [4] DOWEL  
8. 8N-2518 [1] BEARING-SLEEVE  
9. 7N-7970 [1] BEARING-SLEEVE  
10. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING  
13. 7E-4846 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER-FUEL PUMP  
15. 4P-9025 [1] CAMSHAFT AS  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT  
18. 1S-5440 [4] DOWEL  
19. 4N-9019 [1] DOWEL  
20. 7E-3986 [1] CARRIER-WEIGHT  
21. 7L-3326 [1] BEARING-THRUST  
22. 8N-2510 [1] SHAFT-WT CARRIER  
23. 7N-7166 [2] RACE-BEARING-THRUST  
24. 7N-8421 [1] RING-RETAINING  
25. 8N-2487 [1] WASHER-THRUST  
26. 4P-9832 [4] LIFTER AS  
27. 0S-1615 [4] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16520082
 

1W-6539: PUMP GP-FUEL INJECTION

1W6539 PUMP GP-FUEL INJECTION
PART OF 4W0469 PUMP-FUEL INJECTION
c466949 SEBP1652
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7W-2808 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
    (11.1MM LG)
    -OR-
  7C-5278 C [1] BOLT-GEAR  
    (12.1MM LG)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16520083
 

7W-1488: GOVERNOR GP

7W1488 GOVERNOR GP-PART 1 OF 2
PART OF 4W4938 GOVERNOR & FUEL INJECTION PUMP
c529111 SEBP1652
7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT  
2. 6L-5897 [2] BOLT  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 2W-5161 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 8L-5832 C [1] NUT-HEX  
8. 5H-6552 [1] SETSCREW-SOCKET 31.75MM(1.25IN)LG  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET 34.92MM(1.375IN)LG  
9. 8N-3258 [1] COVER-LOAD STOP  
  6I-2004 GASKET  
10. 1P-2497 [2] BOLT-HEAD  
  8T-0328 [2] WASHER-HARD  
11. 3P-0009 [1] INSULATOR-STUD  
12. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
13. 4N-5485 [1] BODY-VALVE  
14. 4N-5484 [1] VALVE-NEEDLE  
15. 6H-9691 [1] SEAL-O-RING  
16. 5F-9144 [1] SEAL-O-RING  
17. 1W-6523 [1] PLUG-O-RING  
18. 8N-3259 [1] COVER-HIGH IDLE  
  6I-2003 [1] GASKET  
19. 5P-6945 C [2] BOLT  
  5P-0537 [2] WASHER  
20. 3J-7354 [1] SEAL-O-RING  
21. 0S-1616 C [6] BOLT  
22. 7N-8780 [1] COVER AS-CONTROL  
23. 5P-3272 [1] SEAL-LIP TYPE  
24. 7N-8779 [1] GASKET-COVER  
25. 8N-2501 [1] HOUSING AS-GOVERNOR (REAR)  
  7E-5346 [1] VALVE AS  
  2F-2290 [1] PLUG-CORE  
26. 4N-0260 [1] SEAL-LIP TYPE  
27. 3D-8317 [1] RING-RETAINING  
28. 8N-2499 [1] GUIDE-SPRING  
29. 7N-8821 [1] RING-RETAINING  
30. 7W-2000 C [1] STOP-DETENT  
31. 6V-8137 [2] SCREW-BUTTON HEAD  
  7W-1318 [1] PLATE-RETAINING  
32. 2W-7400 [1] SPRING  
33. 2W-9996 [1] SCREW-IDLE STOP  
  7W-4272 C [1] NUT-SEALING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16520084
 

7W-1488: GOVERNOR GP

7W1488 GOVERNOR GP-PART 2 OF 2
PART OF 4W4938 GOVERNOR & FUEL INJECTION PUMP
c500550 SEBP1652
7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
2. 1N-3800 [1] SLEEVE-RACK CONTROL  
3. 6N-3504 [1] SEAT-GOVERNOR SPRING  
4. 2W-2216 [1] SPRING-LINK  
5. 2M-7819 [2] RING-RETAINING  
6. 1N-3802 [1] SEAT-SPRING  
7. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 C [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
8. 1W-4098 [1] PISTON-GOVERNOR SERVO  
9. 7W-0250 C [1] SLEEVE  
10. 5P-9757 [1] SEAL-O-RING  
11. 031-0216 [3] BOLT  
12. 4N-2953 [1] RING-LOCK  
13. 7E-4892 [2] RACE-BEARING-THRUST  
14. 7M-7219 [1] BEARING-THRUST  
15. 4W-6868 [1] RISER-GOVERNOR  
16. 4N-0432 [1] BALL BEARING  
17. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN 12.7MM(5IN)LG  
  4F-6024 [2] PIN 8MM(.315IN)LG  
   
   
   
18. 8N-2503 [1] DASHPOT AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
19. 4N-6404 [1] RING-RETAINING  
20. 2P-9556 [1] WASHER  
21. 2N-0828 [2] WASHER  
22. 7N-8785 [1] SHAFT-PIVOT  
23. 7N-8821 [2] RING-RETAINING  
24. 7N-7270 [2] SLEEVE-SPRING  
25. 3K-5733 [1] SPRING  
26. 7N-7267 [1] SPRING  
27. 2W-9305 [1] PLATE-THROTTLE  
28. 7W-1321 [1] PLATE-THROTTLE  
29. 8N-3168 [1] LEVER-THROTTLE  
30. 2W-6102 [1] LEVER-SPRING SEAT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16520085
 

4W-5063: TORQUE CONTROL GP

4W5063 TORQUE CONTROL GP
TYPE 2
PART OF 4W4938 GOVERNOR & FUEL INJECTION PUMP
c491973 SEBP1652
4W5063 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7518 [1] SPRING-TORQUE  
    (.711 MM THK)
2. 2W-7234 C [1] BAR-LOAD STOP  
3. 8M-9062 [1] RETAINER-SPRING  
4. 7W-5700 C [1] CONTACT  
5. 6L-5897 C [2] BOLT  
6. 2P-2685 [1] SPACER (.635 MM THK)  
7. 7N-1796 [1] SPACER (15.494 MM THK)  
8. 1P-6452 [1] INSULATOR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16520086
 

4W-5063: TORQUE CONTROL GP

4W5063 TORQUE CONTROL GP
TYPE 1
PART OF 4W4938 GOVERNOR & FUEL INJECTION PUMP
c319333 SEBP1652
4W5063 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7735 [1] BAR-STOP  
2. 8N-7518 [1] SPRING-TORQUE  
    (.711 MM THK)
3. 7N-7282 [1] BAR-LOAD STOP  
4. 8H-0707 [2] BOLT  
5. 8M-9062 [1] RETAINER-SPRING  
6. 2P-2685 [1] SPACER (.635 MM THK)  
7. 1P-6452 [1] INSULATOR  
8. 8N-3090 [1] CONTACT-LOADSTOP  
9. 9L-9347 [1] SHIM-TORQUE SPRING  
 

#SEBP16520087
 

1W-1354: LINES GP-FUEL INJECTION

1W1354 LINES GP-FUEL INJECTION
7N0042-PAGE 59
c463643 SEBP1652
1W1354 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT  
3. 3P-1156 [2] SEAL-O-RING  
4. 0S-1594 [4] BOLT  
5. 3S-2713 [3] NUT-FULL  
6. 5P-5598 [1] SEAL-O-RING  
7. 4W-7015 R [4] NOZZLE AS  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
8. 9L-9098 [1] SEAL-CARBON STOP  
9. 8T-0659 [1] WASHER-SEALING  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 4W-6060 [1] WASHER  
12. 1W-7492 [1] SUPPORT-COOLER  
13. 0L-2070 [1] BOLT  
14. 0L-1143 [1] BOLT  
15. 1W-4927 [1] VALVE-BYPASS  
16. 1N-3980 [1] PLUG  
17. 7M-7410 [1] PLUG  
18. 3P-1155 [1] SEAL-O-RING  
19. 9L-9188 [1] SPRING-VALVE  
20. 5P-8196 [1] PLUG-O-RING  
21. 2M-9780 [1] SEAL-O-RING  
22. 6V-6921 [1] SEAL-RING  
23. 5F-7054 [1] SEAL-O-RING  
24. 2H-3934 [1] SEAL  
25. 2H-3932 [1] SEAL  
26. 7N-0042 Y [1] LINES GP-FUEL INJECTION  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16520088
 

1W-8874: PUMP GP-FUEL PRIME & PRIM FLTR

1W8874 PUMP GP-FUEL PRIMING & PRIMARY FILTER
8N5251-PAGE 60
c319324 SEBP1652
1W8874 PUMP GP-FUEL PRIME & PRIM FLTR Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5251 Y [1] PUMP GP-FUEL PRIME & PRIM FLTR  
2. 2P-1314 [1] CONNECTOR  
  3J-1907 [1] SEAL  
3. 1W-8876 [1] TUBE AS  
4. 3B-1915 [2] BOLT  
  5M-2894 [2] WASHER  
5. 8M-7145 [2] WASHER  
6. 1W-8875 [1] BAR  
7. 0S-1585 [2] BOLT  
  5P-8245 [2] WASHER  
8. 030-8195 [1] CONNECTOR-FLARED  
  2M-9780 [1] SEAL-O-RING  
9. 030-7946 [1] ELBOW  
10. 3J-7354 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16520089
 

7N-0042: LINES GP-FUEL INJECTION

7N0042 LINES GP-FUEL INJECTION
PART OF 1W1354 LINES-FUEL INJECTION
c499668 SEBP1652
7N0042 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT18B INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7121 [1] LINE AS-FUEL INJ (NO. 1)  
2. 1W-7122 [1] LINE AS-FUEL INJ (NO. 2)  
3. 1W-7123 [1] LINE AS-FUEL INJ (NO. 3)  
4. 1W-7124 [1] LINE AS-FUEL INJ (NO. 4)  
    (EA LINE AS INCL)
5. 8L-2779 [1] SEAL-O-RING  
6. 1W-9168 [3] CLAMP  
7. 5P-4939 [3] SCREW AS-MACHINE  
8. 1W-9169 [3] CLAMP (THREADED)  
9. 1W-0942 [4] ADAPTER AS-FUEL INJ  
    (EACH INCLUDES)
10. 3P-0647 C [2] SEAL-O-RING  
11. 1H-1023 [8] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Fuel Injection Pump
3204 VEHICULAR ENGINE
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE
7000 Series Nozzle
3204 VEHICULAR ENGINE
Fuel Injection
3204 VEHICULAR ENGINE
Injection Nozzles<BR> 9N3979 And 1W5829
3204 VEHICULAR ENGINE
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR IT18 & IT28 INTEGRATED TOOLCARRIER - 3204 VEH
Fuel Transfer Pump
3204 VEHICULAR ENGINES
Governor
3204 VEHICULAR ENGINES
Fuel Injection Pump Housing
3204 VEHICULAR ENGINES
Fuel Injection Pumps
3204 VEHICULAR ENGINES
Fuel Injection Nozzles
3204 VEHICULAR ENGINES
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New Muffler And Pipe Used; Low Idle Increased {1061,1062,1264}
1988/12/26
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog IT18B :

GOV & FUEL INJ PUMP GP
4W-4938 GOV & FUEL INJ PUMP GP
PEDAL GP-GOVERNOR
8V-1179 PEDAL GP-GOVERNOR
MUFFLER GP
4P-4756 MUFFLER GP
MUFFLER GP
7N-6336 MUFFLER GP
MUFFLER GP
1W-5822 MUFFLER GP
MUFFLER GP
7N-6336 MUFFLER GP
LINES GP-AIR COMPRESSOR
1W-5291 LINES GP-AIR COMPRESSOR
AIR COMPRESSOR GP
8N-2051 AIR COMPRESSOR GP
PUMP GP-FUEL INJECTION
4W-0469 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
GOVERNOR GP
7W-1488 GOVERNOR GP
GOVERNOR GP
7W-1488 GOVERNOR GP
TORQUE CONTROL GP
4W-5063 TORQUE CONTROL GP
TORQUE CONTROL GP
4W-5063 TORQUE CONTROL GP
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION
PUMP GP-FUEL PRIME & PRIM FLTR
1W-8874 PUMP GP-FUEL PRIME & PRIM FLTR

Truck sale:

Caterpillar IT18B, Construction
26,000 
Caterpillar IT18B, Construction
- Wheel Loaders
YANCEY BROS. CO.
GA
 
 
CATERPILLAR IT18B 1991
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io
1990 CAT IT18B
USD $26,500 
1990 CAT IT18B

FABICK CAT
Milwaukee, Wisconsin
1991 CAT IT18B
USD $32,500 
1991 CAT IT18B

US Earthmoving Machinery LLC
CAT IT18B
 
CAT IT18B

McGrew Equipment Company
Seven Valleys, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.