AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N-0337 CRANKSHAFT GP S/N 28Z613-621 3516 VEHICULAR ENGINE


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP

VEHICULAR ENGINE 3516 VEHICULAR ENGINE 28Z
 3516 Engine For OEM Built Machines 28Z00613-UP SEBP1678 3516 28Z   (1982)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
448-8940 CRANKSHAFT AS
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
7N-1854 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
 

#SEBP16780020
 

8N-0337: CRANKSHAFT GP

8N-0337 CRANKSHAFT GP
S/N 28Z613-621
i00091739 SEBP1678
8N0337 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-3916 [1] CRANKSHAFT AS  
2. 7E-4201 [48] BOLT-12 POINT HEAD  
  7E-4202 [48] WASHER-HARD (16.2X30X5-MM THK)  
3. 7N-2003 [32] DOWEL  
4. 2W-2288 [8] PLUG  
5. 7C-6209 C [2] PLATE-THRUST  
6. 105-0253 [9] BEARING-MAIN (STANDARD)(STANDARD)  
  105-0254 A [9] BEARING-MAIN (0.63-MM US)(0.63MM US)  
  105-0255 A [9] BEARING-MAIN (1.27-MM US)(1.27MM US)  
  105-0256 A [9] BEARING-MAIN (0.63-MM OS)(0.63MM OS)  
  105-0257 A [9] BEARING-MAIN (0.63-MM OS, 0.63-MM US)(0.63MM US-0.63MM OS)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP16780021
 

8N-0337: CRANKSHAFT GP

8N-0337 CRANKSHAFT GP
S/N 28Z622-652
i00784658 SEBP1678
8N0337 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-6788 C [1] CRANKSHAFT AS  
2. 128-4845 [48] BOLT AS  
3. 7N-2003 [32] DOWEL  
4. 2W-2288 [8] PLUG  
5. 7C-6209 [2] PLATE-THRUST  
6. 105-0253 [9] BEARING-MAIN (STANDARD)  
  105-0254 AB BEARING-MAIN (0.63-MM US)  
  105-0255 AB BEARING-MAIN (1.27-MM US)  
  105-0256 AB BEARING-MAIN (0.63-MM OS)  
  105-0257 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP16780022
 

8N-0337: CRANKSHAFT GP

8N-0337 CRANKSHAFT GP
S/N 28Z653-99999
i01340178 SEBP1678
8N0337 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 448-8940 Y [1] CRANKSHAFT AS  
2. 7C-6209 J [2] PLATE-THRUST  
3. 149-6031 CJ [9] BEARING AS-MAIN (STANDARD)  
  149-6032 AB BEARING-MAIN (0.63-MM US)  
  149-6033 AB BEARING-MAIN (1.27-MM US)  
  149-6034 AB BEARING-MAIN (0.63-MM OS)  
  149-6035 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
   
    AVAILABLE REPAIR KIT(S):
  196-9531 J KIT-BASIC ENGINE REPAIR (MAIN BEARING)  
    (INCLUDES THRUST PLATES & MAIN BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780023
 

101-1173: CYLINDER BLOCK AS

101-1173 CYLINDER BLOCK AS
S/N 28Z635-99999
PART OF 115-5155, 115-5156 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-5160@@@@@
i00092296 SEBP1678
1011173 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-4813 [2] PLUG  
2. 7X-7925 [36] BOLT (7/8-14X11-IN)  
3. 8N-4707 [16] BAND-FILLER  
5. 211-7826 [16] LINER-CYLINDER BLOCK  
6. 223-1696 [9] CAP-CRANKSHAFT BEARING  
7. 5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
8. 7N-2046 [48] SEAL-O-RING  
9. 8T-2928 [2] SEAL-O-RING  
10. 8T-2929 [2] SEAL-O-RING  
11. 4W-4813 B [2] PLUG  
12. 8T-2928 B [2] SEAL-O-RING  
13. 8T-2929 B [2] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP16780024
 

101-1228: CYLINDER BLOCK AS

101-1228 CYLINDER BLOCK AS
S/N 28Z631-634
PART OF 2W-8248 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@101-1245@@@@@
i00092297 SEBP1678
1011228 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4707 [16] BAND-FILLER  
2. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
3. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
4. 4W-4813 [2] PLUG  
5. 8T-2929 [2] SEAL-O-RING  
6. 7N-2046 [48] SEAL-O-RING  
7. 110-6993 [16] LINER-CYLINDER BLOCK  
8. 8T-2928 [2] SEAL-O-RING  
 

#SEBP16780025
 

101-1242: CYLINDER BLOCK AS

101-1242 CYLINDER BLOCK AS
S/N 28Z631-1118
PART OF 101-1245 CYLINDER BLOCK GP
i00092298 SEBP1678
1011242 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-2928 [2] SEAL-O-RING  
2. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
3. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
4. 4W-4813 [2] PLUG  
5. 8T-2929 [5] SEAL-O-RING  
 

#SEBP16780026
 

106-2780: CYLINDER BLOCK AS

106-2780 CYLINDER BLOCK AS
S/N 28Z635-UP
PART OF 115-5160 CYLINDER BLOCK GP
i00093318 SEBP1678
1062780 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
2. 7X-7925 [36] BOLT (7/8-14X11-IN)  
3. 223-1696 [9] CAP-CRANKSHAFT BEARING  
4. 4W-4813 [4] PLUG  
5. 8T-2929 [4] SEAL-O-RING  
6. 8T-2928 [4] SEAL-O-RING  
 

#SEBP16780027
 

7E-4937: CYLINDER BLOCK AS

7E-4937 CYLINDER BLOCK AS
S/N 28Z622-630
PART OF 2W-8248 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 4P-7264@@@@@
i00091635 SEBP1678
7E4937 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4707 [16] BAND-FILLER  
2. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
3. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
4. 4W-4813 B [2] PLUG  
5. 8T-2929 [2] SEAL-O-RING  
6. 7N-2046 [48] SEAL-O-RING  
7. 8N-6861 [16] LINER-CYLINDER BLOCK  
8. 8T-2928 [2] SEAL-O-RING  
9. 4W-4814 B [2] ADAPTER  
  B   USE AS REQUIRED
 

#SEBP16780028
 

101-1245: CYLINDER BLOCK GP

101-1245 CYLINDER BLOCK GP
S/N 28Z631-1118
FIELD REPLACEMENT FOR @@@@@101-1228@@@@@
FIELD INSTALLATION
i00092299 SEBP1678
1011245 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 9S-4191 [6] PLUG (9/16-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 033-6042 [6] SEAL-O-RING  
10. 101-1242 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780029
 

115-5155: CYLINDER BLOCK GP

115-5155 CYLINDER BLOCK GP
S/N 28Z635-652
i00493405 SEBP1678
1155155 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1173 Y [1] CYLINDER BLOCK AS  
2. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
3. 9S-4191 B [6] PLUG (9/16-18-THD)  
4. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 1B-2790 [16] BOLT (5/16-18X1.375-IN)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 116-3254 [16] JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY)  
14. 0T-0102 [16] BOLT (3/8-16X0.625-IN)  
15. 116-1359 [18] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [24] PLUG-PIPE (1/4-18-THD)  
18. 1W-4188 [16] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  8N-9943 [1] RETAINER  
  6V-3537 [1] DOWEL  
19. 8T-0099 [32] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 7N-2049 [16] DOWEL  
22. 5P-0840 [32] SEAL-O-RING  
23. 144-5692 [16] GASKET-PLATE  
24. 110-6994 [16] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [2] SEAL-O-RING  
27. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
28. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8N-8056 [2] COVER  
30. 6V-3348 [8] SEAL-O-RING  
31. 033-6042 [6] SEAL-O-RING  
32. 4W-4814 [2] ADAPTER  
33. 8T-2928 [2] SEAL-O-RING  
34. 8T-2929 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Flange-Type Bushing Kits Available For Later Crankshaft Pulleys
1986/01/01
Use Of Crankshaft Seal Adapter Eliminated
1987/07/01
New Wear Sleeve Available For Alternator Drive Pulley
1988/02/01
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material
1989/02/01
New Crankshaft Thrust Plate Made Of Brass
1989/05/01
New Crankshaft Counterweight Bolt And Washer Used
1989/11/01
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/03/01
New Cylinder Block And Crankshaft Used
1991/09/01
New Crankshafts With Induction Hardened Fillets
1993/07/01
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Improved Crankshaft Seal Groups Used
1993/10/01
Remanufactured Crankshaft Interchangeability; Remanufactured "Upgrade To New" (UTN) Availability {1202}
1994/10/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Numbering The Crankshaft To Match Counterweights{1202,1231}
1995/10/01
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2013/08/21
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/02/20
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Special Instruction
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Connecting Rod And Main Bearing Journals
3500 VEHICULAR ENGINES
Crankshaft
3500 VEHICULAR ENGINES
Crankshaft Wear Sleeves And Seals<BR> (Earlier Engines)
3500 VEHICULAR ENGINES
Crankshaft Wear Sleeves And Seals<BR> (Later Engines)
3500 VEHICULAR ENGINES
Service Letter-China
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Disassembly and Assembly
Crankshaft Pulley And Vibration Damper
3500 VEHICULAR ENGINES
Crankshaft Front Seal And Wear Sleeve
3500 VEHICULAR ENGINES
Crankshaft Rear Seal And Wear Sleeve
3500 VEHICULAR ENGINES
Crankshaft Main Bearings
3500 VEHICULAR ENGINES
Crankshaft
3500 VEHICULAR ENGINES
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Different Thread Lubricant Can Be Used On Connecting Rod And Counterweight Bolts{1202,1218}
1984/05/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}
1988/02/15
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Crankshaft Thrust Plate Made Of Brass {1232}
1989/05/08
New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/02/25
New Cylinder Blocks And Crankshafts Used{1201,1202,1231}
1991/03/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Cylinder Block And Crankshaft Used{1201,1202,1231}
1991/09/16
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
New Crankshaft Seal Groups Prevent Oil Lip Damage {1160,1161}
1993/10/04
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
Numbering The Crankshaft To Match Counterweights {1202,1231}
1995/10/02
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/07/23
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Machine Engines {1160, 1161}
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Machine Engines {1160, 1161}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}

Caterpillar Parts SIS Catalog 3516 :

CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT AS
448-8940 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
8N-9643 COVER GP-FLYWHEEL HOUSING
COVER GP-CYLINDER BLOCK
8N-0373 COVER GP-CYLINDER BLOCK
COVER GP-ACCESSORY DRIVE
8N-4266 COVER GP-ACCESSORY DRIVE
CLUTCH GP
3N-4130 CLUTCH GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CYLINDER BLOCK AS
101-1173 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1228 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1242 CYLINDER BLOCK AS
CYLINDER BLOCK AS
106-2780 CYLINDER BLOCK AS
CYLINDER BLOCK AS
7E-4937 CYLINDER BLOCK AS
CYLINDER BLOCK GP
101-1245 CYLINDER BLOCK GP

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.